电铸镍Wolter I型光学系统制造技术发展综述

摘要： 为满足未来脉冲星导航和空间天文观测任务对X射线望远镜的载荷需求，Wolter I光学系统的研制正逐渐成为新的研究热点，电铸镍方案是当前国内外X射线光学系统镜筒制造的主要技术方案.文章对电铸镍X射线光学系统制造工艺、国内外研制现状、未来应用需求进行了介绍和整理，梳理了电铸镍X射线光学系统研制遇到的关键技术和难点，提出了后续研究发展建议，以促进中国在 X射线脉冲星自主导航、空间探测领域的快速发展.     

Comparison of GPS derived TEC with the TEC predicted by IRI 2012 model in the southern Equatorial Ionization Anomaly crest within the Eastern Africa region

We have compared the TEC obtained from the IRI-2012 model with the GPS derived TEC data recorded within southern crest of the EIA in the Eastern Africa region using the monthly means of the 5 international quiet days for equinoxes and solstices months for the period of 2012 – 2013. GPS-derived TEC data have been obtained from the Africa array and IGS network of ground based dual-frequency GPS receivers from four stations (Kigali (1.95°S, 30.09°E; Geom. Lat. 11.63°S), Malindi (2.99°S, 40.19°E; Geom. Lat. 12.42°S), Mbarara (0.60°S, 30.74°E; Geom. Lat. 10.22°S) and Nairobi (1.22°S, 36.89°E; Geom. Lat. 10.69°S)) located within the EIA crest in this region. All the three options for topside Ne of IRI-2012 model and ABT-2009 for bottomside thickness have been used to compute the IRI TEC. Also URSI coefficients were considered in this study. These results are compared with the TEC estimated from GPS measurements. Correlation Coefficients between the two sets of data, the Root-Mean Square Errors (RMSE) of the IRI-TEC from the GPS-TEC, and the percentage RMSE of the IRI-TEC from the GPS-TEC have been computed. Our general results show that IRI-2012 model with all three options overestimates the GPS-TEC for all seasons and at all stations, and IRI-2001 overestimates GPS-TEC more compared with other options. IRI-Neq and IRI-01-corr are closely matching in most of the time. The observation also shows that, GPS TEC are underestimated by TEC from IRI model during noon hours, especially during equinoctial months. Further, GPS-TEC values and IRI-TEC values using all the three topside Ne options show very good correlation (above 0.8). On the other hand, the TEC using IRI-Neq and IRI-01- corr had smaller deviations from the GPS-TEC compared to the IRI-2001.     

Formation flying reconfiguration manoeuvres via environmental forces in highly elliptical orbits

A study on reconfiguration manoevres applied to a tetrahedral formation in highly elliptical orbits is proposed, by using a propellantless solution. The manoeuvring strategy consists in exploiting certain environmental forces, specifically those provided by solar radiation pressure and atmospheric drag, by actively controlling the satellites’ attitudes. Through inverse dynamics particle swarm optimization the optimal attitudes required for the manoeuvres are evaluated, whereas the configuration’s evolution is simulated by a high-fidelity orbital simulator. The goal of the reconfiguration problem is to find an optimal control in order for the four spacecraft to reach a desired configuration in a specified portion of orbit, where the desired configuration is evaluated by a shape and size geometric parameter. By increasing the manoeuvring time and the satellites’ area to mass ratio, all the case studies considered are successfully verified.     

Structural Nonlinear Flutter Characteristics Analysis for an Actuator-fin System with Dynamic Stiffness

The flutter characteristics of an actuator-fin system are investigated with structural nonlinearity and dynamic stiffness of the electric motor. The component mode substitution method is used to establish the nonlinear governing equations in time domain and frequency domain based on the fundamental dynamic equations of the electric motor and decelerator. The existing describing function method and a proposed iterative method are used to obtain the flutter characteristics containing preload freeplay nonlinea...     

基于快速性能计算算法和序优化的卫星星座构型设计研究(英文)

卫星星座设计是一个复杂耗时的仿真优化设计问题。本文首先介绍了一种利用Hermite插值算法计算卫星星座性能指标的快速算法,用来减少计算复杂度和时间,并且基于快速算法建立了星座构型优化模型。其次引进了序优化理论,用来缩减搜索空间。针对星座优化问题,详细阐述了序优化所涉及到的精确和粗糙模型、有序性能曲线、选择规则和选择集合。通过对卫星导航星座和天基目标监视星座系统的仿真表明序优化理论对处理卫星星座优化设计问题是有效的。     

Admission Control of VL in AFDX Under HRT Constraints

Avionics full duplex switched ethernet(AFDX) is a switched interconnection technology developed to provide reliable data exchange with strong data transmission time guarantees in internal communication of the spacecraft or aircraft.Virtual link(VL) is an important concept of AFDX to meet quality of service(QoS) requirements in terms of end-to-end message deadlines.A VL admission control algorithm in AFDX network under hard real-time(HRT) constraints is studied.Based on the scheduling prin-ciple of AFDX prot...     

暂冲式风洞大开角扩散段性能的实验研究

布置有多层孔板（丝网）的大开角扩散段通过参数的优化设计,可有效缩短暂冲式风洞启动时间,均匀进入稳定段的气流速度,并降低阀后噪声和气流脉动。针对某大型暂冲式风洞大开角扩散段设计关键技术开展专题研究,设计并进行了不同扩散段扩开角角度和中心体分流锥型式的组合实验,从压力损失、出口截面速度分布和降噪特性三个方面进行了对比分析。试验结果表明：试验件45°扩开角＋65°平底锥的压力损失相对最小,而增加导流尾锥的中心分流锥由于底部难以形成稳态的分离涡使得其压力损失明显偏大,其它试验件组合的压力损失值则相接近;各试验件出口截面的速压分布均呈现以中轴线对称分布的双驼峰趋势,且孔板的开孔率偏高时出口剖面速度分布相对更平滑;试验马赫数下的大开角段对气流噪声的消声量约为12～14dB,对频率在2kHz以上的气流噪声具有相对较强的消声能力,同时气流经过设置有多层孔板的大开角扩散段后,气流波动幅值明显降低,气流脉动得到有效地抑制。     

一种针对冗余执行机构配置的修正直接分配算法(英文)

控制分配考虑期望控制量在冗余执行机构配置间的指令分配问题。本文基于执行机构的可达集提出一种修正直接分配新算法,重点解决该类算法的分配效率问题,并与修正伪逆再分配法、基于单纯形法求解的直接分配法线性规划模型以及次梯度优化算法进行对比分析。为减少原始直接分配法的离线计算时间,提出基于执行机构安装矩阵的零空间构建可达集信息,使离线计算时间在执行机构数目小于10时优于传统基于行空间的构建方法。在线计算中,提出基于单位可达集顶点信息寻找与期望控制量射线方向临近的可达集表面,从而缩小搜索范围、降低在线计算时间。仿真结果表明:修正算法不显著增加离线数据存储量,并将在执行机构数目小于10时至少降低32.22%的离线计算时间;在线计算中,其平均在线时间较对比算法均有大幅提高;在高度冗余控制分配问题中,修正算法将具有更大优势。     

航天控制软件知识图谱构建方法研究 #br#

摘要： 近些年，知识图谱构建技术快速发展，但对于领域知识图谱构建的研究还处于起步阶段.知识图谱的构建主要包括自顶向下、自底向上两种方法.当前大多采用自顶向下的方法进行领域知识图谱的构造，首先构建本体，然后通过本体学习得到实体，再将实体加入到知识图谱中.但这种做法有一个缺点，本体学习的过程过分依赖人工，不支持构建专业性强、数据量大的领域知识图谱.针对这一缺点，本文提出一种自顶向下和自底向上法相结合的领域知识图谱构建方法.提出一种改进的骨架法来进行本体构建，保证构建本体的准确率和覆盖率；利用基于规则与半监督的知识抽取技术，提高知识图谱的构建速度；并以某航天控制软件为例，详细说明了领域知识图谱的整体构建流程.实验结果表明，该领域知识图谱的构建方法是可行的.