基于强化学习的在轨目标逼近

从强化学习的角度,对在轨目标逼近问题进行研究,设计了一种整合制导与控制的端到端的算法.首先对在轨目标逼近问题进行数学建模;然后对强化学习算法原理进行简介,根据问题特点分析不同强化学习框架的优劣,确定以DDPG作为算法框架,并设计了基于强化学习的在轨目标逼近算法;最后通过仿真验证,分析了基于强化学习逼近算法的优劣性.     

Scientific objectives and payloads of Tianwen-1, China’s first Mars exploration mission

This paper describes the scientific objectives and payloads of Tianwen-1, China’s first exploration mission to Mars. An orbiter, carrying a lander and a rover, lifted-off in July 2020 for a journey to Mars where it should arrive in February 2021. A suite of 13 scientific payloads, for in-situ and remote sensing, autonomously commanded by integrated payload controllers and mounted on the orbiter and the rover will study the magnetosphere and ionosphere of Mars and the relation with the solar wind, the atmosphere, surface and subsurface of the planet, looking at the topography, composition and structure and in particular for subsurface ice. The mission will also investigate Mars climate history. It is expected that Tianwen-1 will contribute significantly to advance our scientific knowledge of Mars.     

Measurement of mass diffusion coefficients of O_2 in aviation fuel through digital holographic interferometry

The experimental apparatus to measure the mass diffusion coefficients of O2 in aviation fuel was constructed based on the digital holographic interferometry method. The theory of mass diffusion coefficient and interference image processing were introduced in detail. The accuracy of the experiment was verified by measuring the mass diffusion coefficient of 0.33 mol/L KCl in aqueous solution at 298.15 K. The mass diffusion coefficients of O_2 in RP3 and RP5 aviation fuels were measured at temperature from 278.15 K to 333.15 K, and the Arrhenius equation was employed to fit the experimental data. In terms of the Stokes-Einstein equation, the viscosities of these two aviation fuels were tested to estimate the correlation among mass diffusion coefficient, viscosity and temperature. A uniform polynomial calculation correlation was proposed to predict the mass diffusion coefficients of O_2 in both RP3 and RP5 aviation fuels, and its accuracy is considerably higher than that of the Stokes-Einstein equation.     

Global ionospheric scintillations revealed by GPS radio occultation data with FY3C satellite before midnight during the March 2015 storm

Global observations of S4 amplitude scintillation index by the GPS Occultation Sounder (GNOS) on FengYun-3 C (FY3C) satellite reveal global dynamic patterns of a strong pre-midnight scintillations in F-region of the ionosphere during the St. Patrick’s Day geomagnetic super storm of 17–19 March 2015. The observed strong scintillations mainly occurred in the low latitudes, caused by equatorial plasma bubbles. During the main storm phase (March 17), the scintillations were first triggered in the New Zealand sector near 160°E longitudes, extending beyond 40°S dip latitude. They were also enhanced in the Indian sector, but significantly suppressed in East Asia near 120°E longitude and in Africa around 30°E longitude. During the initial recovery phase (March 18–19), the global scintillations were seldom observed in GNOS data. During the later recovery phase (after March 19), the scintillations recovered to the pre-storm level in Indian, African, and American sectors, but not in East Asian and any of Pacific sectors. These results closely correlate with observations of the density depletion structures by the Communication/Navigation Outage Forecasting System (C/NOFS) satellite, and ground-based instruments. Such consistency indicates reliability of our scintillation sensing approach even in a case-by-case comparison study. The prompt penetration electric field and disturbance dynamo electric field are suggested as the main factors that control the enhancement and inhibition of the scintillations during the storm, respectively.     

内孔结构对旋转空化发生器水力特性的影响

空化普遍存在于工业生产、舰船推进、航空航天等领域.使用高速相机对闭式循环试验台的旋转空化发生器内部流动进行试验观测，然后基于RNG k ε湍流模型和Zwart Gerber Belamri空化模型开展了旋转空化发生器流场的数值模拟.结果表明数值模拟结果与试验观测数据吻合较好，验证了本文数值模拟方法的准确性和可靠性.受离心力作用，转子孔内的压力从内径到外径逐渐增大.内孔底部由于轴向旋涡的作用，产生较大旋涡并耗散能量.内孔顶部流体与腔体区主流相互作用，在内孔顶侧产生碰撞并形成较小漩涡.不同内孔结构对旋转空化发生器的空化效果具有重要影响，在相同工况下椭圆形内孔的空化率小于圆锥形和圆柱形，说明型线光滑的内孔结构局部损失小，产生的空化较弱.不同内孔结构下，旋转空化发生器内部压力脉动的主频为转频fi或24fi(对应圆周方向开孔排数)，压力脉动最大幅值出现在进口管侧和出口管侧，主要原因是受动静干涉作用影响.     

GNSS遥感探测卫星星座设计

随着全球导航卫星系统（Global Navigation Satellite System，GNSS）掩星大气探测技术的兴起，GNSS遥感探测数据在气象数据资源中逐步占据重要地位，但是目前的掩星探测数量远不能满足数值天气预报等应用的需求，未来更需要充分利用GNSS信号资源，开展更大规模的GNSS掩星卫星星座探测.本文以世界气象组织发布的大气海洋数据需求为参考，提出新一代GNSS遥感探测星座任务需求与设计约束.在理想大气模型假设下，利用几何解析方法研究了探测卫星星座构型参数对探测性能的影响，并建立了新一代GNSS遥感探测卫星星座设计基本准则.以风云卫星为子星座，给出了星座规模同为40颗的三种GNSS遥感探测微纳卫星星座设计方案.研究结果表明，具备该规模的探测星座可满足数值天气预报等气象应用的最低数据需求，三种构型方案中，由高、中、低倾角三组Walker子星座与风云卫星子星座组建的GNSS遥感探测星座探测性能最优.      

Generalized Kutta–Joukowski theorem for multi-vortex and multi-airfoil flow with vortex production——A general model

By using a special momentum approach and with the help of interchange between singularity velocity and induced flow velocity, we derive in a physical way explicit force formulas for twodimensional inviscid flow involving multiple bound and free vortices, multiple airfoils, and vortex production. These force formulas hold individually for each airfoil thus allowing for force decomposition, and the contributions to forces from singularities(such as bound and image vortices,sources, and doublets) and bodies out of an airfoil are related to their induced velocities at the locations of singularities inside this airfoil. The force contribution due to vortex production is related to the vortex production rate and the distance between each pair of vortices in production, thus frameindependent. The formulas are validated against a number of standard problems. These force formulas, which generalize the classic Kutta–Joukowski theorem(for a single bound vortex) and the recent generalized Lagally theorem(for problems without a bound vortex and vortex production) to more general cases, can be used to identify or understand the roles of outside vortices and bodies on the forces of the actual body, optimize arrangement of outside vortices and bodies for force enhancement or reduction, and derive analytical force formulas once the flow field is given or known.     

Numerical analysis and optimization of boundary layer suction on airfoils

Numerical approach of hybrid laminar flow control(HLFC) is investigated for the suction hole with a width between 0.5 mm and 7 mm. The accuracy of Menter and Langtry’s transition model applied for simulating the flow with boundary layer suction is validated. The experiment data are compared with the computational results. The solutions show that this transition model can predict the transition position with suction control accurately. A well designed laminar airfoil is selected in the present research. For suction control with a single hole, the physical mechanism of suction control, including the impact of suction coefficient and the width and position of the suction hole on control results, is analyzed. The single hole simulation results indicate that it is favorable for transition delay and drag reduction to increase the suction coefficient and set the hole position closer to the trailing edge properly. The modified radial basis function(RBF) neural network and the modified differential evolution algorithm are used to optimize the design for suction control with three holes. The design variables are suction coefficient, hole width, hole position and hole spacing. The optimization target is to obtain the minimum drag coefficient. After optimization,the transition delay can be up to 17% and the aerodynamic drag coefficient can decrease by 12.1%.