Scientific objectives and payloads of Tianwen-1, China’s first Mars exploration mission

This paper describes the scientific objectives and payloads of Tianwen-1, China’s first exploration mission to Mars. An orbiter, carrying a lander and a rover, lifted-off in July 2020 for a journey to Mars where it should arrive in February 2021. A suite of 13 scientific payloads, for in-situ and remote sensing, autonomously commanded by integrated payload controllers and mounted on the orbiter and the rover will study the magnetosphere and ionosphere of Mars and the relation with the solar wind, the atmosphere, surface and subsurface of the planet, looking at the topography, composition and structure and in particular for subsurface ice. The mission will also investigate Mars climate history. It is expected that Tianwen-1 will contribute significantly to advance our scientific knowledge of Mars.     

Early analysis of precise orbit and clock offset determination for the satellites of the global BeiDou-3 system

Eight new-generation BeiDou satellites (BeiDou-3) have been launched into Medium Earth Orbit (MEO), allowing for global coverage since March 2018, and they are equipped with new hydrogen atomic clocks and updated rubidium clocks. Firstly, we analyzed the signals for the carrier-to-noise-density ratio (C/N0) and pseudorange multipath (MP) by using international GNSS (Global Navigation Satellite System) Monitoring and Assessment System (iGMAS) station data, and found that B1C has a lower C/N0, and B2a has the same level of C/N0 as the B1I and B3I signals. For pseudorange multipath, compared with the BeiDou-2 satellites, the obvious systematic variation of MP scatters related to the elevation angle is greatly improved for the BeiDou-3 and BeiDou-3e satellites signals. For the signals of the BeiDou-3 satellites, the order of the Root Mean Square (RMS) values of multipath and noise is B3I?<?B1I?<?B2a?<?B1C. Then, the comparison of the precise orbit determination and clock offset determination for the BeiDou-2, BeiDou-3, and BeiDou-3 experimental (BeiDou-3e) satellites was done by using 10 stations from iGMAS. The 3D precision of the 24?h orbit overlap is 24.55, 25.61, and 23.35?cm for the BeiDou-3, BeiDou-3e, and BeiDou-2 satellites, respectively. BeiDou-3 satellite has a comparable precision to that of the BeiDou-2 satellite. For the precision of clock offset estimation, the Standard Deviation (STD) of the BeiDou-3 MEO satellite is 0.350?ns, which is an improvement of 0.042?ns over that of the BeiDou-2 MEO satellite. The stabilities of the BeiDou-3 and BeiDou-3e onboard clocks are better than those of BeiDou-2 by factors of 2.84 and 1.61 at an averaging time of 1000 and 10,000?s, respectively.     

Ionospheric F2-Layer critical frequency retrieved from COSMIC radio occultation: A statistical comparison with measurements from a meridional ionosonde chain over Southeast Asia

In this paper, we compared the F2-Layer critical frequency (foF2) derived from FORMOSAT-3/COSMIC radio occultation (RO) and ionosondes at Chiang Mai, Chumphon and Kototabang during the years 2008–2015 to evaluate the performance of COSMIC RO over Southeast Asia region. The results show that the time development of foF2 values derived from COSMIC RO generally agrees well with those from ionosonde measurements. However, the differences between the foF2 derived from COSMIC RO and that derived from ionosonde observations display latitudinal dependence. COSMIC RO tends to underestimate foF2 at Chiang Mai and Kototabang, which is near to the north EIA crest and the south one, respectively, while a little overestimate foF2 at Chumphon, which is close to the geomagnetic equator. COSMIC RO agrees best with ionosonde at Chumphon and worst at Chiang Mai. At each ionosonde station, the quality of COSMIC RO data degrades with the increase of solar activity. In addition, at the station Chiang Mai and Kototabang, COSMIC RO performs better in summer than in equinox and winter. Furthermore, the differences in foF2 derived from COSMIC RO and that from ionosonde measurements vary with local time, i.e., the differences in foF2 are generally smaller at night and larger in noontime when equatorial ionization anomaly (EIA) is well developed.     

Alfvén gravity waves in viscous solar plasma: Effect of the background flow

We study the Propagation and damping properties of Alfvén gravity waves in the presence of the vertical magnetic field in the viscous solar plasma under influence of the background flow by deriving a fourth order dispersion relation in terms of the Doppler shifted frequency. We derive the dispersion relation under WKB and Boussinesq approximation. We study the damping of Alfvén gravity waves for the wave frequencies less than and greater than the Brunt-Väisälä frequency. We find that the Brunt-Väisälä frequency divides the frequency ranges where the weakly or strongly damped oscillations occur. The background flow exhibits a strong effect on weakly damped oscillations and a weak effect on the strongly damped oscillations. We also notice that the damping of both the strong and weakly damped oscillations depend on the Brunt-Väisälä frequency and wave number. The effect of the background flow is also being governed by the Brunt-Väisälä frequency and wave number. We also study the properties of gravity wave mode after filtering the Alfvén wave mode by minimizing the magnetic field and noticed that the background flow shows a very strong effect on the gravity wave mode.     

新型宽带宽波束圆极化卫星导航终端天线的设计与实现

卫星通信与卫星定位系统的应用发展，对终端设备天线的性能提出了更高的应用需求。为实现宽频带宽波束圆极化天线的设计，采用正交移相馈电网络对含有背腔的交叉偶极子天线馈电，实现了宽带圆极化单向辐射特性，同时利用磁电偶极子对交叉偶极子进行加载，展宽了天线的波束宽度，促使天线在50.7%的相对带宽内S11＜-10dB，在1.3~1.75GHz的频带内轴比小于3dB，轴比小于3dB的圆极化波束宽度可达180°，增益不小于6.6dB。经实测验证，所设计的天线具有宽频带宽波束特性，同时具有结构紧凑、性能稳定的优点，适用于卫星通信与导航终端系统。     

基于飞行数据分析的发动机故障诊断系统研究

依据现有的发动机故障诊断方法,研究发动机故障诊断系统,通过对飞行数据中反映发动机性能指标的关键参数数据进行分析,说明系统对航空发动机故障诊断的可行性和必要性,研究结果对于提高发动机维护的快速性和准确性具有重要意义.     

首颗自主地月转移微卫星“龙江二号”

本文对世界首颗独立完成地月转移、近月制动、环月飞行的微卫星“龙江二号”进行了介绍。首先阐述了龙江二号的任务目标和总体方案；然后重点分析了轨道设计与控制、复杂电磁干扰的标定与抑制、宽视场三维基线干涉测量等关键技术难点；接着回顾了任务的实施过程；最后详细介绍了低频射电探测仪、沙特光学相机和VHF/UHF通信模块与学生微型CMOS相机等有效载荷，并展示了上述载荷获取的初步成果。     

基于有限Fourier级数的航天器转移轨迹设计

针对航天器小推力转移轨迹的初始设计问题，利用基于三阶Fourier级数的设计方法实现了航天器小推力的多圈转移。同时，基于有限Fourier级数的形状法，对具有多个约束条件的小推力多圈转移轨迹进行了优化设计。选取了共面同轴同偏心率的初始和末端轨道位置，对所提出的方法进行了仿真验证。结果表明：与改进逆五阶多项式形状法相比，所提出的方法虽然增加了转移时间，但当转移圈数为5圈、有限Fourier级数的项数为10时，可减少将近75%的转移速度增量，同时大大减小了所需的最大推力加速度的值。