基于单视图的非合作航天器三维体素重构算法CSCD

空间对抗态势下,针对非合作航天器的快速高精度智能感知、意图识别与威胁评估等在轨相对导航任务,均依赖精准的目标三维模型先验信息。但星载传感器感知视场有限,传统基于多帧图像的模型重构算法存在流程复杂、实时性差及恢复精度低等问题。为此,提出了一种基于单视图的航天器三维体素重构算法,能够基于单帧图像高效地恢复目标的空间三维信息。首先,针对空间航天器视觉感知任务研究中普遍存在的数据饥饿问题,通过整理航天器三维模型,利用图像渲染技术构建了小规模本地数据集,包括航天器三维模型、对应体素和多视角采样图像三部分。接着,设计了基于单视图的三维重建模型,使用单帧非合作航天器图像作为输入,通过2D-3D混合卷积完成“编码-解码-调优”三个子模块计算,实现对目标三维体素结构的恢复。最后,在本地数据集上进行网络模型的训练和评估,验证了当前模型能够实时精确重建目标航天器三维体素模型,并在现有数据上取得了0.895的MIoU值;同时,网络对不同航天器的重建效果体现了模型具有强大的泛化能力。     

机动目标三维空间导引运动建模及导引律研究

给出了导弹—目标追逃运动的空间矢量方程，在此基础上推导了三维导引运动模型。对机动目标应用李雅普诺夫稳定性分析方法提出了一种自适应变结构制导算法。六自由度数学仿真结果表明了模型的正确性和制导算法的有效性。     

飞机穿越下冲暴流安全起飞运动方程的研究

推导了存在风切变时在气流坐标系（相对风轴系）中飞机质心空间三维运动方程和在体轴系中飞机的旋转运动方程，指出了按航迹坐标系，（绝对风轴系）建立移动运动方程时某些不便之外。为了进行比较，给出了分别应用上述两组运动方程计算的波音－７２７飞机起飞行轨迹的不同结果。     

简单二体引力模型用于空间目标轨道面交线确定的效果分析

在空间目标碰撞预警分析中，准确地计算出空间目标的轨道面交线是进行地心距筛选、时间差筛选的前提，目前较多使用的快速确定轨道面交线的方法为简单二体引力模型。深入分析该模型，比较了其计算的空间目标轨道面交线与STK计算结果的差异，指出了简单二体引力模型在计算空间目标轨道面交线时的局限性，认为轨道摄动是影响轨道面交线计算准确性的主要原因，应该采用更能反映空间目标实际运动规律的改进的二体引力模型的方法。     

一种基于三维到达角的无偏伪线性卡尔曼滤波

为了解决大场景下基于三维到达角的目标跟踪问题，提出了一种具有无偏性的伪线性卡尔曼滤波。首先，基于三维到达角信息对目标运动模型与量测模型进行建模；之后，对量测模型进行了伪线性化处理，得到了线性形式的目标量测模型。为了解决伪线性卡尔曼滤波存在的有偏性问题，提出了一种结合EKF（extend Kalman filter）的三维伪线性无偏卡尔曼滤波。仿真实验表明，该模型能够对非机动目标与机动目标有效跟踪，对于百公里级别的目标，当角测量误差从0.1°变化到0.5°，算法在仿真时间结束时均能将绝对位置误差降低至10 km以内，且算法的运行速度与EKF为同一个量级，同时兼顾了抗干扰能力、定位跟踪精度、运行效率的要求，能够为大场景下的目标跟踪提供有效方法。     

基于固定阈值事件触发扩张状态观测器的多智能体协同目标环绕控制

针对复杂多扰环境下面向未知运动目标的多智能体对峙跟踪问题,提出了一种基于固定阈值事件触发扩张状态观测器(FTESO)的多智能体协同目标环绕控制方法。首先,建立了智能体与目标的相对运动模型,将目标加速度、模型非线性、环境摄动视为集总干扰,利用量测的相对位置信息构造可降低测量端状态更新频次的FTESO,以实现在非周期采样条件下对于相对速度不可测和集总干扰未知的精准估计。其次,结合速度方向场理论生成目标与智能体间的期望相对速度,根据相邻智能体间的相对角间距信息与FTESO的观测结果,设计了一种不依赖目标加速度信息的多智能体相位协同一致性协议,使得多智能体能够以指定环绕半径、环绕角速度和相对角间距实现对未知运动目标的环绕跟踪。借助Lyapunov稳定性理论,证明了闭环系统中所有误差信号最终一致有界。最后,通过仿真和比较结果验证了所提算法的有效性。     

基于多智能体强化学习的空间机械臂轨迹规划

针对某型六自由度（DOF）空间漂浮机械臂对运动目标捕捉场景,开展了基于深度强化学习的在线轨迹规划方法研究。首先给出了机械臂DH （Denavit-Hartenberg）模型,考虑组合体力学耦合特性建立了多刚体运动学和动力学模型。然后提出了一种改进深度确定性策略梯度算法,以各关节为决策智能体建立了多智能体自学习系统。而后建立了"线下集中学习,线上分布执行"的空间机械臂对匀速直线运动目标捕捉训练系统,构建以目标相对距离和总操作时间为参数的奖励函数。最后通过数学仿真验证,实现了机械臂对各向匀速运动目标的快速捕捉,平均完成耗时5.4 s。与传统基于随机采样的规划算法对比,本文提出的自主决策运动规划方法求解速度和鲁棒性更优。     

基于Chebyshev正交分解的曲线运动轨迹SAR的Chirp Scaling算法

针对具有三维速度和加速度的曲线运动轨迹合成孔径雷达（SAR），传统的斜距模型无法精确描述其运动特性，曲线历程增加了距离走动现象和方位向时间的高次项，使二维耦合现象更为复杂。本文提出了一种考虑载体平台三维速度和加速度的Chirp Scaling算法以解决曲线运动轨迹SAR成像问题。首先根据运动方程建立斜距表达式，然后对其进行Chebyshev近似，并构造其等效双曲方程形式的斜距模型，推导了具有空变性的距离徙动函数，Chirp Scaling因子以及适用于曲线轨迹的Chirp Scaling成像算法。仿真结果证实了此扩展的等效斜距模型和Chirp Scaling算法在大合成孔径时间下的有效性，并给出了三维加速度的边界值。     

现代战机空战对策建模研究

分析了现代战机空战的种类,着重讨论了单机单目标空战对策的建模问题,分别从二维和三维的角度描述了空战双方的几何关系并建立了飞行器相对运动模型.在此基础上,针对单机单目标空战可能出现的两种情况,建立了追-逃微分对策模型和双目标对策模型.     

三维编织体复合材料空间几何结构的计算机模拟

针对四步方形编织结构,从三维编织工艺和实际的编织过程出发,提出一种单元几何模型,并通过计算机图形建模建立织物的空间几何数学模型,解决了三维编织复合材料内部编织结构分析困难的问题。该模型以携纱器循环一周返回到起始位置所形成的纱线编织结构作为单元,系统分析编织过程中纱线的空间运动规律,保证纤维束的连续性和材料整体结构的完整性。对每根纱线,选取它在编织体各个区域内合适的控制点,过这些控制点拟合成三次样条曲线,以此模拟纱线的空间结构中心线,从而能够方便直观地观察到各纱线具体走向。最后得到纱线和编织体的结构,从而便于下一步进行编织体复合材料力学性能的有限元分析。     

Automatic target recognition of time critical moving targets using1D high range resolution (HRR) radar

Synthetic Aperture Radar (SAR) imaging and Automatic Target Recognition (ATR) of moving targets pose a significant challenge due to the inherent difficulty of focusing moving targets. As a result, ATR of moving targets has recently received increased interest. High Range Resolution (HRR) radar mode offers an approach for recognizing moving targets by forming focused HRR profiles with significantly enhanced target-to-(clutter+noise) (T/(C+N)) via Doppler filtering and/or clutter cancellation. A goal of HRR ATR transition is the implementation and evaluation of algorithms exhibiting robustness under extended operating conditions (EOC). The public domain Moving and Stationary Target Acquisition and Recognition (MSTAR) data set was used to study 1D template-based ATR development and performance. Due to the unavailability of a statistically significant moving ground target data set, this approach was taken as an interim step in assessing the separability of ground targets when using range only discriminants. This report summarizes the data and algorithm methodology, simulated performance results, and recommendations     

New assignment-based data association for tracking move-stop-move targets

We present a new assignment-based algorithm for data association in tracking ground targets employing evasive move-stop-move maneuvers using ground moving target indicator (GMTI) reports obtained from an airborne sensor. To avoid detection by the GMTI sensor, the targets deliberately stop for some time before moving again. The sensor does not detect a target when the latter's radial velocity (along the line-of-sight from the sensor) falls below a certain minimum detectable velocity (MDV). Even in the absence of move-stop-move maneuvers, the detection has a less-than-unity probability (P/sub D/<1) due to obscuration and thresholding. Then, it is of interest, when a target is not detected, to develop a systematic technique that can distinguish between lack of detection due to P/sub D/<1 and lack of detection due to a stop (or a near stop). Previously, this problem was solved using a variable structure interacting multiple model (VS-IMM) estimator with a stopped target model (VS-IMM-ST) without explicitly addressing data association. We develop a novel "two-dummy" assignment approach for move-stop-move targets that considers both the problem of data association as well as filtering. Typically, in assignment-based data association a "dummy" measurement is used to denote the nondetection event. The use of the standard single-dummy assignment, which does not handle move-stop-move motion explicitly, can result in broken tracks. The new algorithm proposed here handles the evasive move-stop-move motion by introducing a second dummy measurement to represent nondetection due to the MDV. We also present a likelihood-ratio-based track deletion scheme for move-stop-move targets. Using this two-dummy data association algorithm, the track corresponding to a move-stop-move target is kept "alive' during missed detections both due to MDV and due to P/sub D/<1. In addition, one can obtain reductions in both rms estimation errors as well as the total number of track breakages.     

FrFT-CSWSF:Estimating cross-range velocities of ground moving targets using multistatic synthetic aperture radar

Estimating cross-range velocity is a challenging task for space-borne synthetic aperture radar（SAR）, which is important for ground moving target indication（GMTI）. Because the velocity of a target is very small compared with that of the satellite, it is difficult to correctly estimate it using a conventional monostatic platform algorithm. To overcome this problem, a novel method employing multistatic SAR is presented in this letter. The proposed hybrid method, which is based on an extended space-time model（ESTIM） of the azimuth signal, has two steps： first, a set of finite impulse response（FIR） filter banks based on a fractional Fourier transform（FrFT） is used to separate multiple targets within a range gate; second, a cross-correlation spectrum weighted subspace fitting（CSWSF） algorithm is applied to each of the separated signals in order to estimate their respective parameters. As verified through computer simulation with the constellations of Cartwheel, Pendulum and Helix, this proposed time-frequency-subspace method effectively improves the estimation precision of the cross-range velocities of multiple targets.     

Moving target imaging algorithm for SAR data

A digital processing algorithm for fine-resolution imaging of synthetic aperture radar (SAR) moving targets is described. The targets may have any translational and rotational motion components relative to the data collection platform. The algorithm requires the presence of up to three prominent points in the image of the target; the signals from these points provide estimates of the unknown target motion parameters. Phase compensation and data formatting based on these estimates eliminate motion-induced phase errors. This algorithm has been implemented on a VAX computer and used to process both simulated and real SAR data of moving targets. Results obtained using the simulated data are presented     

空间自旋目标宽带雷达干涉三维成像方法

空间目标三维成像可为目标的特征提取、分类与识别提供重要依据。基于L型三天线干涉成像原理,提出了一种宽带雷达条件下空间自旋目标干涉三维成像方法。首先,分析了雷达发射线性调频(LFM)信号条件下,空间自旋目标在距离-慢时间平面上的成像特点,建立了基于距离-慢时间平面的空间自旋目标干涉三维成像模型;其次,针对建立的干涉三维成像模型中,不同散射点的回波在距离-慢时间平面上会相互交叠的问题,对回波曲线分离、交叉点处理以及一维距离旁瓣的影响等进行了讨论,并给出了解决方法,从而获得目标三维图像。与已有方法相比,该方法可有效克服单基雷达三维成像无法获得目标各散射点真实三维位置以及在双/多基雷达三维成像时多部雷达回波联合处理较困难的问题。最后,仿真实验结果验证了所提方法的有效性。     

Kirchhoff方法在旋翼前飞噪声预测中的应用研究

将CFD(计算流体力学)技术与噪声预测的Kirchhoff方法相结合,发展了前飞状态下直升机旋翼远场气动噪声的定量预测方法,得到了旋翼噪声的时域解。先用具有解析解的“点源”流动代替旋翼流动,通过比较计算值与理论值,验证了该预测方法的可行性和可靠性;尔后针对AH—1／OLS旋翼模型的两种前飞状态进行计算,通过比较计算值与实验值,进一步验证了本文方法及其所发展的程序的正确性。     

Design and Optimization of 3D Radial Slot Grain Configuration

Upper stage solid rocket motors (SRMS) for launch vehicles require a highly efficient propulsion system. Grain design proves to be vital in terms of minimizing inert mass by adopting a high volumetric efficiency with minimum possible sliver. In this article, a methodology has been presented for designing three-dimensional (3D) grain configuration of radial slot for upper stage solid rocket motors. The design process involves parametric modeling of the geometry in computer aided design (CAD) software through...     

三维空间中目标机动加速度的估值问题

建立了描述目标在三维空间中进行切向与法向机动的非线性状态模型。目标切向与法向机动加速度的幅值表示为修正的瑞利-马尔可夫随机过程;法向加速度的方向角则假定在2π区间内具有均匀的概率密度。在仅有含噪声位置观察数据的情况下,发展了一种推广的卡尔曼滤波和自适应算法,并由此获得一种机动目标切向与法向加速度估值的直接方法。提供了某些计算结果以证实方法的有效性。     

固体火箭复合结构喷管传热的隐式计算方法

采用适用于多层复合结构的当量热容瞬态热传导方程,通过坐标变换解决多个移动边界问题,用ADI方法推导了二维隐式求解格式,在与烧蚀相耦合的情况下获得了复合结构喷管的温度分布。用隐式方法计算有效地减少了计算机时,对工程设计大有裨益。     

Velocity estimation of fast moving targets using a single SAR sensor

A new methodology is presented to retrieve slant-range velocity estimates of moving targets inducing Doppler-shifts beyond the Nyquist limit determined by the pulse repetition frequency (PRF). The proposed approach exploits the linear dependence (not subject to PRF limitations) of the Doppler-shift with respect to the slant-range velocity, at each wavelength. Basically, we propose an algorithm to compute the skew of the two-dimensional spectral signature of a moving target. Distinctive features of this algorithm are its ability to cope with strong range migration and its efficiency from the computational point of view. By combining the developed scheme to retrieve the slant-range velocity with a methodology proposed earlier to estimate the velocity vector magnitude, the full velocity vector is unambiguously retrieved without increasing the mission PRF. The method gives effective results even when the returned echoes of the moving targets and the static ground overlap completely, provided that the moving targets signatures are digitally spotlighted and the signal-to-clutter ratio (SCR) is, roughly, greater than 14 dB. The effectiveness of the method is illustrated with simulated and real data. As an example, slant-range velocities of moving objects with velocities between 6 and 12 times the Nyquist velocity are estimated with accuracy better than 3%.