载人火星探测进展及其EDL过程GNC关键技术

随着火星探测技术的不断发展和探测任务的不断推进，载人火星探测在未来将会成为火星探测的重要手段。首先，回顾了无人火星探测任务的发展历程，对比分析了部分无人火星探测器进入、下降与着陆（EDL）过程的参数。然后，结合无人火星探测、载人月球探测和载人航天再入过程，梳理了载人火星探测的特点及需求，系统地总结了前苏联/俄罗斯和美国的载人火星探测研究进展以及技术储备。接着，归纳了载人火星探测的体系构成、集结方式和主要的技术挑战。最后，概括了载人火星EDL过程面临的难题，重点阐述了EDL的导航、制导与控制（GNC）关键技术。     

Control techniques of tilt rotor unmanned aerial vehicle systems:A review

The tilt rotor unmanned aerial vehicle (TRUAV) exhibits special application value due to its unique rotor structure. However, varying dynamics and aerodynamic interference caused by tiltable rotors are great technical challenges and key issues for TRUAV's high-powered flight con-trols, which have attracted the attention of many researchers. This paper outlines the concept of TRUAV and some typical TRUAV platforms while focusing on control techniques. TRUAV struc-tural features, dynamics modeling, and flight control methods are discussed, and major challenges and corresponding developmental tendencies associated with TRUAV flight control are summa-rized.     

不依赖于卫星的无人系统视觉/激光雷达感知与自主导航技术

智能化的无人系统在现代社会中起着重要作用,而对环境信息的准确感知以及自身位置的精准估计是无人系统智能、高效执行任务的核心基础,视觉与激光雷达传感器是无人系统常用的感知与导航传感器.近年来,随着应用场景的拓展,无卫星信号、无光等恶劣环境对无人系统的感知与自主导航技术提出了新的挑战.针对上述环境,对无人系统中视觉/激光雷达感知技术与自主导航技术及其进展进行了分析和总结.从感知和导航定位两个应用层面出发,深入讨论和分析了基于视觉和激光雷达手段的深度估计、目标检测、自主导航、地图构建等技术的机理差异、实现方法及特性.分析了目前国内外研究成果及进展,总结对比了目前的技术特点与局限性,并展望了未来无人系统感知与导航的关键技术挑战与发展趋势.     

扇翼飞行器的研究进展与应用前景

随着科学技术的迅猛发展,飞机无论在构型还是性能方面都获得了飞速发展,但是新原理飞机的研制却进展不大。扇翼飞行器是近期发展起来的低速大载荷新型飞行器,它是不同于现有固定翼、旋翼飞行器的新构型、新原理飞行器。而国内对于该飞行器的研究才刚刚起步,可参考的文献资料很少。因此,本文通过国内外扇翼飞行器发展状况的研究,对扇翼飞行器研究进展进行总结分析。首先介绍了扇翼飞行器的飞行原理;其次系统地回顾了扇翼飞行器的提出,并总结了其在国内外研究的进展情况;接着根据扇翼飞行器近期的发展动态,对该飞行器的应用前景作出分析;最后总结了扇翼飞行器发展中亟待解决的关键技术,以及其未来发展的难点和趋势。     

直升机人机耦合研究现状与趋势

开展直升机人机耦合研究对于确保直升机飞行安全具有重要意义。简要介绍了飞机/直升机人机耦合、驾驶员诱发振荡以及驾驶员辅助振荡等概念及其关系,分析了直升机人机耦合振荡的诱发原因,总结了其分类及特点。对当前国内外直升机人机耦合的研究现状进行了综述,并对驾驶员建模技术和振荡机理分析方法等研究热点问题进行了分析。最后,指出了未来直升机人机耦合的研究趋势。     

多无人机协同控制方法及应用研究

多无人机集群作战是未来战争的重要形式。作为集群作战中的关键技术,协同控制有着极为广泛的应用,例如多无人机编队飞行、协同侦查与集群攻击等。简述了多无人机集群作战的发展历程,归纳了集群作战过程中的关键技术,给出了协同控制方法的分类与体系结构。然后,从编队控制、合围控制、跟踪控制3个方面,总结了近年来国内外关于协同控制方法的研究成果。重点介绍了编队控制中的四种典型方法及相关应用,分析了各类编队控制方法的优缺点。最后对多无人机协同控制方法的未来发展方向进行了展望。     

Hydraulic piston pump in civil aircraft: Current status,future directions and critical technologies

The piston pump is the key power component in the civil aircraft hydraulic system, and the most common pump used in the aviation field is the pressure compensated variable displacement type. In this review paper, a basic introduction to the civil aircraft piston pump is presented, including the classification, structure, working principle, design features, and achievements by some research groups. Then, the future directions of the aircraft pump are reported from various perspectives. Further, the critical technologies are analyzed and summarized in detail from six thrust areas: friction couples, noise reduction, inlet boost, thermal management, fault diagnosis and health management, and mechanical seal. Finally, the challenges and limitations of the research on the aircraft pump are discussed to provide valuable insight for future scholars.     

Advanced technologies and new roles for VTOL aircraft (Part II/II)

This survey paper intends to overview some main technical evolutions impacting present and future general design of rotorcraft (for vehicles, engines and systems), including helicopter and future tilt-rotor. These trends tend to achieve a better adaptation to a wide range of mission requirements with an economic aircraft optimisation and an enhanced safety level and environmental impact. Whilst part I considered the whole rotorcraft technical activity, the present part II is essentially focused on market issues and the tilt-rotor concept introduction.     

Review of uncertainty-based multidisciplinary design optimization methods for aerospace vehicles

This paper presents a comprehensive review of Uncertainty-Based Multidisciplinary Design Optimization (UMDO) theory and the state of the art in UMDO methods for aerospace vehicles. UMDO has been widely acknowledged as an advanced methodology to address competing objectives of aerospace vehicle design, such as performance, cost, reliability and robustness. However the major challenges of UMDO, namely the computational complexity and organizational complexity caused by both time-consuming disciplinary analysis models and UMDO algorithms, still greatly hamper its application in aerospace engineering. In recent years there is a surge of research in this field aiming at solving these problems. The purpose of this paper is to review these existing approaches systematically, highlight research challenges and opportunities, and help guide future efforts. Firstly, the UMDO theory preliminaries are introduced to clarify the basic UMDO concepts and mathematical formulations, as well as provide a panoramic view of the general UMDO solving process. Then following the UMDO solving process, research progress of each key step is separately surveyed and discussed, specifically including uncertainty modeling, uncertainty propagation and analysis, optimization under uncertainty, and UMDO procedure. Finally some conclusions are given, and future research trends and prospects are discussed.     

Advanced technologies and new roles for VTOL aircraft (Part I/II)

This survey paper intends to overview some main technical evolutions impacting present and future general design of rotorcraft (for vehicles, engines and systems), including helicopter and future tilt-rotor. These trends tend to achieve a better adaptation to a wide range of mission requirements with an economic aircraft optimisation and an enhanced safety level and environmental impact.     

A review on fault-tolerant cooperative control of multiple unmanned aerial vehicles

This paper presents the recent developments in Fault-Tolerant Cooperative Control(FTCC) of multiple unmanned aerial vehicles(multi-UAVs). To facilitate the analyses of FTCC methods for multi-UAVs, the formation control strategies under fault-free flight conditions of multi-UAVs are first summarized and analyzed, including the leader-following, behavior-based, virtual structure, collision avoidance, algebraic graph-based, and close formation control methods,which are viewed as the cooperative con...     

基于多准则决策的作战飞机顶层方案优选

提出了综合应用灰色关联投影法、加权求和法、加权求积法和基于理想点决策法来实现对无人作战飞机顶层方案的优选,并着重介绍了多准则决策方法及实施过程。该方法采用不同的公度化方法处理相应的评价指标,对多目标、多层次指标体系进行赋权,利用权重将评价指标联系在一起,并将四种准则决策法进行综合,依据决策者的偏好,最终实现顶层方案的优选。最后,通过制空无人作战飞机顶层方案优选的例子,证实了所提方法是可行且有效的。     

无人机集群研究进展综述

集群行为是一种常见于自然界中鱼群、鸟群、蜂群等低等群居生物的集体行为，生物群中的个体仅依靠局部感知作用和简单的通信规则自主决定其运动状态，并且从简单的局部规则涌现出协同的整体行为。受此启发，提出了无人机集群作战的概念。无人机集群作战是指依靠大量低成本、速度快、适应能力强、易于携带和投射的无人机形成规模优势，从而取得战争的主动权。由于无人机集群技术的重要战略地位，中美俄等军事大国均开始重视无人机集群技术的持续发展。介绍了无人机集群的研究动机，从模型、协议和平台3个角度总结了研究方法，重点分析了几种典型作战模式以及涉及的若干关键技术。综上所述，集群技术在军事方面具有重要的应用价值，必将引领全新的作战模式。     

Recent advances and trends in roll bonding process and bonding model: A review

This review presents a thorough survey of the roll bonding process with a focus on the bimetallic bars/tubes as well as the bonding models and criteria. The review aims to provide insight into cold, hot and cryogenic bonding mechanisms at the micro and atomic scale and act as a guide for researchers working on roll bonding, other joining processes and bonding simulation. Meanwhile, the shortcomings of roll bonding processes are presented from the aspect of formable shapes, while bonding models are shown from the aspect of calculation time, convergence, interface behavior of dissimilar materials as well as hot bonding status prediction. Two well-accepted numerical methodologies of bonding models, namely the contact algorithm and cohesive zone model (CZM) of bonding models and in simulations of the bonding process are highlighted. Particularly, recent advances and trends in the application of the combination of mechanical interlocking and metallurgical bonding, special energy fields, gradient structure, novel materials, green technology and soft computing method in the roll bonding process are also discussed. The challenges for advancing and prospects of the roll bonding process and bonding model are presented in an attempt to shed some light on the future research direction.     

多无人机协同航迹规划技术研究

多无人机协同航迹规划是多无人机协同控制的重要组成部分。多无人机协同航迹规划能得到满足安全性、协同性和任务要求的较优航迹,这对提高无人机系统性能有重要的意义。介绍了多无人机协同航迹规划的问题描述和求解结构,总结了在协同规划问题中的约束条件和航迹协调方法,着重阐述了几种在多无人机编队中常用的控制方法。在此基础上,对未来可能的研究方向进行了展望。     

Autonomous flight and navigation of VTOL UAVs: from autonomy demonstrations to out-of-sight flights

Future applications of UAV systems will depend on the aircraft autonomous behavior and decision capabilities. Search and Rescue is one complex possible mission and is here taken as a case study. The ReSSAC project is a multidisciplinary project at ONERA. Its main challenges are related to the architectures and algorithms for autonomous decision and information processing onboard UAVs that perform their mission in cooperation with operators. The feasibility demonstrations and results of the project are intended to be reused and extended in further studies, projects and collaborations. A first step of the project was to develop an autonomous control architecture for our two rotorcraft. In this paper, we present the current status and preliminary achievements of the ReSSAC project, especially some records of past experimental flights with our autonomous aircraft. We further discuss ongoing studies and research perspectives.     

单片机系统多串行口设计技术研究

介绍了常见的单片机多串行口设计方法,在分析这些方法优缺点的基础上给出了应用时的选择原则。     

无人机系统的安全性与危险源分析

无人机系统的战术性能及优势将使其在未来高技术战争和民用航空中发挥越来越重要的作用。然 而,由于有人机与无人机飞行事故的特点不同,使得有人机的安全性分析与管理措施不完全适用于无人机系 统。首先,对无人机系统的飞行事故进行统计分析,得出无人机系统事故的特点;然后,合理借鉴有人机的安全 性分析,定义无人机系统的安全性,提出无人机系统事故的严酷度等级划分及相应的危险可接受度;最后,从设 计、机组训练及使用操作三方面进行危险源分析。本文提出的无人机系统不安全事件发生可能性等级划分和 危险源定性分析,可为后续无人机安全管理框架的构建奠定基础。     

Cascade-type guidance law design for multiple-UAV formation keeping

A procedure to compute guidance commands for controlling the relative geometry of multiple unmanned aerial vehicles (UAVs) in formation flight is proposed. The concepts of branch, global leader, and local leader/follower are used to represent the whole formation geometry. A positive-definite function defined in terms of the formation error is then introduced and the Lyapunov stability theorem is used to obtain the cascade type guidance law. This scheme leads to the synchronized flight of all UAVs while maintaining formation geometry. The results of a high fidelity nonlinear simulation of a reconnaissance and surveillance mission example are presented to show the effectiveness of the proposed guidance law.     

无人机自主控制发展趋势研究

根据无人机自主控制的定义与内涵,将无人机自主控制关键技术划分为态势感知技术、规划与协同技术、自主决策技术和执行任务技术,并针对这四项关键技术发展所涉及内容分别进行了层级研究,初步给出了我国无人机自主控制层级发展规划和层级发展趋势图,可以为我国建立无人机自主控制能力标准或者开展无人机自主控制研究项目提供参考.