电流变柔性微致动器驱动电源的研究

针对电流变柔性微致动器所用的驱动电源,在理论上探讨了采用交流或直流供电方式的特点,并以此为基础设计了驱动电源的电路结构,然后针对驱动电源的关键技术做了分析,提出了稳定性补偿方案并进行了试验研究。试验结果表明电流变微致动器的分布电容对驱动电源的动态响应有很大影响。     

基于无线激光通信的转子参数遥测方法研究

为了满足航空发动机转子、直升机旋翼等旋转部件动态参数的高速实时采集需求,提出了一种基于无线激光通信的旋转部件非接触参数遥测方法,并给出了基于该方法的参数遥测系统总体方案.重点研究了光电数据传输通道中发射激光器的信号驱动、光电探测器的信号放大及串行/解串器等关键电路的设计方法.设计了理论最大传输速率达622 Mb/s的无线激光通信收发模块,并测试了收发模块的实际性能.最后,研制了参数遥测试验样机,该样机在旋转状态下的数据传输率达300 Mb/s,满足航空发动机转子的动态参数遥测要求.      

Closed-loop dynamic control allocation for aircraft with multiple actuators

A closed-loop control allocation method is proposed for a class of aircraft with multiple actuators. Nonlinear dynamic inversion is used to design the baseline attitude controller and derive the desired moment increment. And a feedback loop for the moment increment produced by the deflections of actuators is added to the angular rate loop, then the error between the desired and actual moment increment is the input of the dynamic control allocation. Subsequently, the stability of the closed-loop dynamic control allocation system is analyzed in detail. Especially, the closedloop system stability is also analyzed in the presence of two types of actuator failures: loss of effectiveness and lock-in-place actuator failures, where a fault detection subsystem to identify the actuator failures is absent. Finally, the proposed method is applied to a canard rotor/wing (CRW) aircraft model in fixed-wing mode, which has multiple actuators for flight control. The nonlinear simulation demonstrates that this method can guarantee the stability and tracking performance whether the actuators are healthy or fail.     

Electromechanical flight actuators for advanced flight vehicles

The aircraft flight quantities and success of the mission depend to a great extent upon the actuator performance, and flight actuators must be designed to achieve the specified criteria. Electromechanical flight actuators driven by electric motors have begun to displace hydraulic technology in advanced flight vehicles. In aerospace application, permanent-magnet stepper motors are perfectly suited due to their efficiency and reliability, low volume-, weight-, and size-to-torque ratios, high power and torque densities, low cost and maintenance, simplicity and ruggedness, etc. Conventional open-loop stepper motor servos do not ensure the required accuracy and dynamic performance. An innovative method in motion control of advanced electromechanical flight actuators is developed, and nonlinear controllers are designed. The specified tracking accuracy, desired stability margins, microstepping capabilities, and disturbance attenuation are ensured by the robust nonlinear controllers synthesized. Analytical, numerical, and experimental results are documented to study the performance of flight actuators directly driven by stepper motors and to demonstrate the efficiency of control algorithms     

直升机后缘襟翼驱动器迟滞现象仿真与抑制

直升机后缘襟翼多采用压电驱动器作为驱动元件，但是在使用过程中压电驱动器迟滞会对其振动控制性能产生不利影响，因此针对压电驱动器迟滞开展了迟滞建模与抑制研究。通过实验研究了压电驱动器在不同驱动频率下的迟滞特性，采用Bouc-Wen模型对驱动器迟滞现象进行了建模，并采用粒子群算法（PSO）辨识模型参数，与实际测量迟滞曲线进行了对比，在10~60 Hz范围内所建立的迟滞模型能够较为精确地描述压电驱动器迟滞现象。建立了基于Bouc-Wen逆模型的前馈补偿控制与PID反馈控制相结合的复合控制策略，实验结果显示该控制策略能够在10~60 Hz较宽的频率范围内有效抑制该压电驱动器迟滞现象。建立了考虑驱动器迟滞的主动控制后缘襟翼振动控制动力学模型，并对中等速度稳态前飞条件下后缘襟翼振动控制性能进行了仿真，仿真结果显示驱动器迟滞会在一定程度上削弱振动控制性能，而采用复合控制可以提高后缘襟翼旋翼振动控制性能。     

两种主动控制喘振现象作动机构的非线性分析

 对喘振主动控制中所采用的作动机构进行了介绍，导出了与作动机构有关的系统非线性方程组，并定性地解释了作动机构引起附加小扰动的机理，对实际作动机构的动态平衡点进行了标定，并分析了实际作动机构与压缩系统的非线性耦合特征     

压电陶瓷叠层作动器迟滞蠕变非线性自适应混合补偿控制方法

压电陶瓷叠层作动器的迟滞蠕变非线性特性严重影响了控制系统的稳定性及动态跟踪精度。针对其迟滞蠕变非线性补偿控制问题,提出了一种高精度动态补偿压电陶瓷叠层作动器非线性特性的自适应混合补偿控制方法,即迟滞蠕变前馈补偿与自适应滤波反馈补偿结合的前馈-反馈混合控制方法。采用改进的Prandtl-Ishlinskii（Modified Prandtl-Ishlinskii,MPI）模型对压电陶瓷叠层作动器迟滞蠕变非线性特性进行精细化建模,并得到其逆补偿模型进行前馈补偿。根据前馈补偿误差,采用自适应滤波反馈控制对输入信号进行实时调控,实现对压电陶瓷叠层作动器的迟滞非线性及lg（t）型蠕变特性的实时精确补偿控制。数值仿真与实验结果表明,相比于常规前馈迟滞蠕变补偿,所提出的自适应混合补偿控制方法可以有效降低压电陶瓷叠层作动器的迟滞补偿误差,极大提高了迟滞蠕变非线性动态跟踪精度以及自适应性。     

高动态电动伺服机构1553B总线通信的设计与实现

目前1553B总线通信在航空航天领域应用广泛,电动伺服机构作为导弹控制系统的重要组成部分,大量采用1553B进行总线通信.高动态要求下电动伺服机构控制优先级一般高于1553B通信处理的优先级,主要介绍基于BU-61581S6总线接口协议芯片RT端软件接收数据的时序处理方法,保证高动态条件下提高1553B的通信速率和可靠性以及电动伺服机构的高动态响应.     

合成射流激励器对射流矢量的影响

合成射流激励器全流场计算模型—X L模型,实现了将激励器腔体及外部受控流场作为单连域的计算处理。对合成射流激励器在不同工作状态下控制宏观低速流流动进行了数值分析和机理探讨。结果显示:应用合成射流激励器可以有效控制宏观低速流流动方向,通过改变激励器的工作参数和布置位置可以控制主流的偏转角度;激励器处于"拉"模式对主流的控制效果更明显,且激励器与受控主流之间存在一个最佳距离,使得对主流的矢量控制效果最大;合成激励器工作形成的漩涡对强度受合成射流频率和速度幅值影响。压强梯度的存在和旋涡的卷吸作用是合成射流激励器控制宏观低速流流动方向的主要因素。     

翼型分离流动的等离子体控制数值分析方法研究

利用等离子体进行流动控制是当前的研究热点之一.本文研究通过数值方法模拟等离子体对流场作用的实现方法,及利用数值模拟方法研究翼型大迎角分离流动的等离子体控制.利用CFD软件Fluent中的自定义函数接口,通过C语言编程在软件中引入DBD等离子体激励模型外加体积力源项,对NACA0015翼型大迎角下的等离子体控制进行数值模拟.验证DBD等离子体激励在抑制流动分离与增升减阻方面的作用.结果表明：流动控制效果与DBD激励器布置位置有直接关系;激励器的数量与激励强度均会影响流动控制作用.     

SDBD plasma enhanced aerodynamics: concepts,optimization and applications

This paper provides an overview of the physics and design of single dielectric barrier discharge (SDBD) plasma actuators for enhanced aerodynamics in a variety of applications. The actuators consist of two electrodes, one exposed to the air and the other covered by a dielectric material. The electrodes are supplied with an ac voltage that at high enough levels, causes the air over the covered electrode to ionize. The ionization of the air is a dynamic process within the ac cycle. The ionized air, in the presence of the electric field produced by the electrode geometry, results in a body force vector that acts on the ambient air. The body force is the mechanism for active aerodynamic control. The body force per unit volume of plasma has been derived from first principles and implemented in numerical flow simulations. This utilizes models for the time and space dependence of the air ionization on the input voltage amplitude, frequency, electrode geometry and dielectric properties that have been developed and bench-marked with experiments. The experiments and model suggest approaches that can maximize the performance of the plasma actuators. A sample implementation of an actuator model in a numerical flow simulation consisting of leading-edge separation control on an airfoil along with an experimental benchmark is then presented.     

The adjustment of the mathematical model accuracy of the gas-hydraulic flight control actuator power circuit of an aircraft

The methodology is proposed and the mathematical model is developed for the purpose of numerical simulation of the power circuit of the gas-hydraulic actuator with displacing power source for the gimbaled nozzle control. It provides the highest power efficiency factor of the actuator as a part of aircraft by means of pulling together the profiles of available and required power.     

基于布谷鸟搜索算法的一类变体飞行器容错控制

针对一类存在执行机构故障的分布式结构变体飞行器的控制分配问题,结合整数规划理论,提出一种基于布谷鸟搜索算法的容错控制方法。首先,设计虚拟控制指令,使得系统状态能够很好地跟踪参考模型;然后,将执行器概率性故障与饱和约束转换为整数规划问题中决策变量的约束,从而将执行器控制分配问题转化为一类整数规划问题;最后,采用改进的布谷鸟搜索算法进行求解,得到实际的执行器控制分配指令。仿真结果表明,在执行器存在概率性故障的情况下,该容错控制方法较无容错策略的情况能够有效提升系统的跟踪性能;与遗传算法相比,该算法得到的执行器控制分配结果更加精确。     

一种微气泡型MEMS作动器研究

设计了一种基于MEMS技术的微气泡型作动器,将微作动器布置在NACA0012翼型和三角翼机的前缘上,利用Fluent进行数值模拟,结果表明微作动器可以改变机翼前缘附体流的流动状态,提高翼型升力系数,改变三角翼机前缘流动状态,利用微作动器可以成功进行流动控制。     

介质阻挡放电等离子体对翼型流动分离控制的实验研究

在低速开口风洞中进行了等离子体激励器对NACA0015翼型流动分离控制的实验研究。采用PIV技术,对翼型绕流流场进行了测量,显示了施加等离子体激励后流场的变化。通过五分量天平对升力和阻力的测量,研究了激励电压和激励频率对翼型流动分离控制的规律。研究表明,低风速下在翼型前缘施加等离子体激励,能够有效地控制翼型流动分离,在来流为20m／s时,最大升力系数增加11％,失速迎角增加6°;在给定的流动状态下,激励电压和激励频率存在一个阈值,不同迎角下该阈值不同,迎角越大,分离越严重,对激励强度的要求也越高。     

Concepts for position and load control for hybrid actuation in primary flight controls

Moving towards the More Electric Aircraft, a hybrid actuator configuration, in which an electromechanical actuator (EMA) and an electrohydraulic servoactuator (EHSA) operate on the same control surface, provides an opportunity to introduce electromechanical actuators into primary flight controls. Besides the operation in active/passive or active/active mode, an “active/no-load” mode is promising. In this mode the EMA is controlled such that it actively follows the movement of the control surface without carrying external air loads, thereby reducing power dissipation compared to active/active mode and failure transients compared to active/passive mode. However, force fighting will occur if both actuators are actively controlled. In this paper, control concepts for a hybrid configuration, extending the original actuator control loops, are presented, enabling active/active as well as active/no-load operation. Nonlinear as well as linear models for an EMA, an EHSA, and a control surface structure are derived from technical data for an airworthy EHSA and combined to a model of the hybrid configuration. These models are used for matching of actuator dynamics and simulation of the developed control laws. For active/active mode, maximum force fighting between the actuators is reduced from about 500% to 7% of the stall load. For active/no-load mode, a force control loop is added to the EMA control, causing the EMA to follow movements of the control surface such that the external loads on the EMA are zero in steady-state. Force fighting is reduced to 30% of the stall load.     

基于深度森林的卫星ACS执行机构与传感器故障识别

针对卫星姿态控制系统（ACS）闭环回路的故障难以辨识的问题,引入深度森林算法,实现执行机构与传感器故障识别。首先针对可获取的少量卫星姿态控制系统遥测数据,结合系统动力学特性,研究合适的特征选择和特征提取方法,再结合深度森林算法进行故障信息学习与辨识,建立故障预测模型,实现执行机构故障与传感器故障的识别。半物理仿真结果表明：在存在气浮台干扰力矩、卫星转动惯量未知、飞轮非线性特性、闭环故障传播等多种不利因素情况下,深度森林算法对于执行机构和传感器故障具有高效的识别能力。     

Experimental characteristics of a two-electrode plasma synthetic jet actuator array in serial

Plasma Synthetic Jet (PSJ) actuators have shown wide and promising application prospects in high-speed flow control, due to their advantages including high exhaust speed, wide frequency band, rapid response, and non-moving components. Although previous studies on PSJ actuators are abundant, most of them have focused on the performance of a single actuator. However, in practice, an actuator array is very necessary for large-scale aerodynamic actuation on account of the small affected area of a single PSJ. In this paper, the characteristics of a two-electrode plasma synthetic jet actuator array in serial are investigated experimentally. Compared to a parallel actuator array, the serial actuator array requires simpler power supply design and is much easier to realize. High-speed photography of the discharge evolution, voltage-current measurement, and shadowgraphy visualization are used in the investigation. Experimental results show that, for the serial actuator array, weak discharges happen firstly between energized and suspending electrodes, and then a strong pulse arc discharge is triggered. The breakdown voltage in serial is irrelevant to such factors as the number of actuators, the maximum or minimum gap in serial, the connection sequence, etc. It is mainly determined by the sum of gaps. For serial actuators with the same anode-to-cathode spacing, the energy deposition is the same, and the jet is synchronous and similar. Because of the entrainment and merging of adjacent jet vortices, the jet front speed of an aligned synchronous jet array increases as the orifice distance decreases. To achieve the highest jet front velocity, the orifice of the actuator has an optimal diameter.     

压电纤维复合材料铺层用于翼面设计的驱动特性与刚度影响

压电纤维复合材料驱动器在形状控制、振动控制、颤振抑制与抖振控制等方面有广泛的应用前景。首先简单介绍了压电应变驱动的比拟载荷方法,并采用该方法讨论了压电陶瓷片状驱动器与压电纤维复合材料驱动器在驱动特性上的主要差异。在此基础上,对压电纤维复合材料在不同铺设方式、铺设角度与铺设层数下的驱动特性进行了分析,在刚度影响方面展示了不同铺设角度下模型刚轴的移动。分析结果表明:对称铺设反向电场可以同时获得弯曲与扭转变形,而反对称铺设同向电场主要获得扭转变形;两种铺设方式下45°铺设角均获得最大弦向转角,而0°铺设角将获得最大挠度;多铺层可以增加驱动载荷,但总体变形效果还取决于结构系统的刚度比例;对称铺设方式下铺设角对结构刚轴移动的影响非常明显,在气动弹性控制中应着重关注。     

阻尼不相似动力学模型的时域响应修正方法

 动力学相似的缩比模型试验中,阻尼往往难以保证相似,使得缩比模型的动响应测试数据难以直接换算到结构原型上,因此提出一种阻尼不相似动力学模型的时域响应修正方法来解决这一问题。该修正方法假定缩比模型的阻尼可用比例阻尼模型近似表征,并直接从实际缩比模型与理想缩比模型的一般强迫振动响应计算方程出发,利用线性系统的叠加原理和模态叠加法,将动响应修正量的求解转换为理想模型在一个等效附加激励力作用下的时域响应求解。同时,针对实际工程中响应测点数目有限的问题,利用模态缩聚法进行了未测量点的响应反演。该修正方法仅需已知结构原型和实际缩比模型的模态阻尼比,以及准确建立的实际缩比模型的质量矩阵和刚度矩阵,即可实现实际缩比模型在任意激励工况下的测试动响应修正。以某型飞机的翼梁缩比模型为研究对象,对所提出的响应修正方法进行了验证。试验和计算结果对比分析表明,修正后的响应功率谱密度(PSD)和响应的均方根(RMS)值与理想模型基本一致,表明了本文方法的可行性和有效性。