一种用于主动流动控制的气泡型微致动器

 面向先进主动流动控制，在国内率先研发了一种基于微机电系统(MEMS)的气泡型微致动器阵列技术。分析了气泡型微致动器用于主动流动控制的原理，阐述了致动器结构及其加工工艺。通过对气泡样件的压力载荷 变形行为的测试，表明其具有较好的线性和较大承载能力。结合不同翼型的风洞试验表明，微致动器作动可以影响翼型表面的压强分布，从而可用于增升等控制目的。     

钝前缘三角翼的高阶湍流数值模拟研究

模拟钝前缘三角翼的特殊双（内、外侧）主涡流动结构和流动分离点的情况,通过定常的RANS计算和基于SA模型的DES计算表明,计算结果与试验数据吻合度较好,可以比较准确地捕捉了三角翼的双主涡结构。同时,应用SA-DES方法可以提高漩涡的模拟精度。     

NS-DBD激励控制非细长三角翼前缘涡仿真研究

通过在三角翼前缘施加纳秒脉冲介质阻挡放电（NS-DBD）激励唯象学模型，进行了47°后掠角钝前缘三角翼流动控制的仿真。分析了不同迎角下升力和阻力系数的变化、流场结构的变化、以及激励诱导旋涡的演化过程。研究表明:施加无量纲激励频率F+=1.44的NS-DBD激励后，可明显提高三角翼失速前后的升力系数；同时阻力系数也有所增加，变化趋势与实验结果一致。激励在前缘分离剪切层处诱导产生流向涡，改变了前缘剪切层结构，使其向内卷吸；激励后时均流场形成了明显的负压峰值，前缘涡附着线外移，吸力面回流区减小。      

三角翼DBD等离子体流动控制研究进展

现代战机采用较多的三角翼，在大迎角绕流时存在前缘涡破裂等气动问题。作为新型主动流动控制技术，等离子体激励频带宽、响应快、结构简单、便于闭环控制，在解决三角翼气动问题上具有潜力。回顾了介质阻挡放电（DBD）等离子体气动激励的基本原理，及其用于三角翼前缘涡控制的研究进展。从来流条件、几何构型、激励参数等方面分析了DBD等离子体激励对流动控制效果的影响规律；结合不同激励频率下流场演化特性，分析了流动控制机理。最后，从理论研究和工程应用的角度，对三角翼前缘涡控制的发展进行总结展望。     

钝前缘三角翼无人机气动特性研究

三角翼布局因其优良的气动特性在军用飞机和无人机上获得了广泛应用.为了研究钝前缘三角翼无人机的气动特性,首先采用求解雷诺平均N-S方程的方法对NASA钝前缘三角翼标模进行对比计算,以验证计算方法的可靠度;然后对无人机四个升降舵偏角的气动力和流场特性进行分析研究.结果表明:三角翼无人机在升力系数较小时具有较高的升阻比,当迎角小于1 5°时,钝前缘三角翼前缘气流附体、吸力较高,翼面的横向流动不明显,使飞机的升阻比提高;当迎角大于15°后,涡流特征起主导作用,使得飞机在直到40°迎角范围内没有出现大面积气流分离,具有良好的俯仰稳定性,升降舵效率较高.钝前缘三角翼气动布局在翼展受限、翼载较小的条件下具有一定的气动特性优势.     

破裂涡流中非定常现象与频率特性实验研究

通过流动显示、表面动态压力测量及热线测量等实验手段,对三角翼破裂涡流中的多种频率成分进行了分析。频谱分析确定了破裂点脉动和螺旋波的频率特征。实验结果表明,螺旋波主频随着弦向位置的增大先是迅速而后平缓减小。前缘涡破裂点振动具有准周期性,在不同的弦向位置上主频大小几乎没有改变,在靠近破裂点的位置有较大的振动能量。实验分析还表明,在破裂涡的流动状态下,虽然没有形成完全分离流,三角翼绕流流场中已经存在涡脱落的现象。     

以外加辅助件推迟三角翼上涡破裂的初步水洞实验

对尖锐前缘、后掠角为60°的大攻角平板三角翼模型进行了水洞实验。利用附加的小辅助件,改变翼面上方的流场,使机翼前缘肌体涡推迟破裂。流动显示表明:在翼面上的适当位置安放圆弧形或三角形导流体,或在翼面上方另加一辅助小三角翼,能使涡破裂推迟的效果得到显著提高。此结果可供推迟涡破裂来改善飞机气动性能的研究工作参考。     

天然气绕三角翼旋流的水洞实验研究

天然气绕三角翼产生旋流,使天然气中的游离水滴甩出,附着在管道内壁上,在气流的牵引下沿管道内壁向下游流动,实现了气水分离的目的。通过水洞实验,利用染色液流动显示技术,探讨了流体绕三角翼后产生旋流的可行性。同时,基于均匀设计思想对三角翼的前缘后掠角、后缘后掠角和迎角等几何参数分别做了5个水平的实验研究,均证实了天然气绕三角翼后产生旋流的可靠性,为该技术的应用奠定了基础。     

后缘喷流对三角翼前缘涡的影响

本实验应用染色液流动显示技术和激光测速技术 (LDV)研究了 6 0°后掠三角翼在后缘差动喷流、对称喷流情况下前缘涡破裂位置、涡核的空间分布、涡核的速度分布以及三角翼背风面流动结构随迎角的演化等。实验结果表明 ,喷流增大了三角翼前缘涡涡核保持高速度的区域 ,推迟了涡核减速的位置 ,在大迎角情况下 ,对称喷流有助于消除由前缘涡振荡引起的“摇滚”现象。     

利用微气囊扰动进行流动控制的数值模拟研究

探讨一种可以用来模拟“三角翼上分布微气囊，从而控制流动获得滚转力矩”的数值方法。为微型飞机的气动设计提供一种工具。研究的内容包括：考虑微气囊的三角翼网格生成、流场NS方程计算、微气囊不同布局对流动的扰动等。     

Closed-loop dynamic control allocation for aircraft with multiple actuators

A closed-loop control allocation method is proposed for a class of aircraft with multiple actuators. Nonlinear dynamic inversion is used to design the baseline attitude controller and derive the desired moment increment. And a feedback loop for the moment increment produced by the deflections of actuators is added to the angular rate loop, then the error between the desired and actual moment increment is the input of the dynamic control allocation. Subsequently, the stability of the closed-loop dynamic control allocation system is analyzed in detail. Especially, the closedloop system stability is also analyzed in the presence of two types of actuator failures: loss of effectiveness and lock-in-place actuator failures, where a fault detection subsystem to identify the actuator failures is absent. Finally, the proposed method is applied to a canard rotor/wing (CRW) aircraft model in fixed-wing mode, which has multiple actuators for flight control. The nonlinear simulation demonstrates that this method can guarantee the stability and tracking performance whether the actuators are healthy or fail.     

电流变柔性微致动器驱动电源的研究

针对电流变柔性微致动器所用的驱动电源,在理论上探讨了采用交流或直流供电方式的特点,并以此为基础设计了驱动电源的电路结构,然后针对驱动电源的关键技术做了分析,提出了稳定性补偿方案并进行了试验研究。试验结果表明电流变微致动器的分布电容对驱动电源的动态响应有很大影响。     

Design and experimental testing of a control system for a morphing wing model actuated with miniature BLDC motors

The paper deals with the design and experimental validation of the actuation mechanism control system for a morphing wing model. The experimental morphable wing model manufactured in this project is a full-size scale wing tip for a real aircraft equipped with an aileron. The morphing actuation of the model is based on a mechanism with four similar in house designed and manufactured actuators, positioned inside the wing on two parallel lines. Each of the four actuators used a BrushLess Direct Current (BLDC) electric motor integrated with a mechanical part performing the conversion of the angular displacements into linear displacements. The following have been chosen as successive steps in the design of the actuator control system: (A) Mathematical and software modelling of the actuator; (B) Design of the control system architecture and tuning using Internal Model Control (IMC) methodology; (C) Numerical simulation of the controlled actuator and its testing on bench and wind tunnel. The morphing wing experimental model is tested both at the laboratory level, with no airflow, to evaluate the components integration and the whole system functioning, but also in the wind tunnel, in the presence of airflow, to evaluate its behavior and the aerodynamic gain.     

Novel roll effector based on zero-mass-flux dual synthetic jets and its flight test

The autonomous and controllable Dual Synthetic Jet Actuator (DSJA) is firstly integrated into the Unmanned Aerial Vehicle (UAV), and flight tests without the deflection of rudders are carried out to verify the viability of DSJA to control the attitudes of UAV during cruising. DSJA is improved into an actuator with two diaphragms and three cavities, which has higher energy levels. Actuators, differentially distributed on both sides of the wings, are installed on the trailing edge close to the wing tips. Flight tests, containing Differential Circulation Control (DCC) using double-side actuators, Positive Circulation Control (PCC) using left-side actuators and Negative Circulation Control (NCC) using right-side actuators, are implemented at cruising speed of 25 m/s. Results show that roll attitude control without rudders could be realized by DSJAs. DCC and NCC can generate the rightward roll and yaw angular velocity, prompting UAV to turn right. The stronger controlling ability can be achieved by DCC, with the maximum roll angular velocity of 15.62 (°)/s. PCC can generate a rightward roll moment, but a leftward yaw moment will be produced at the same time. Leftward yaw induces the leftward rolling moment, which weakens the roll control effect, making UAV keep to yaw to the left with a small slope.     

Turbulent boundary layer separation control using plasma actuator at Reynolds number 2000000

An experimental investigation was conducted to evaluate the effect of symmetrical plasma actuators on turbulent boundary layer separation control at high Reynolds number. Compared with the traditional control method of plasma actuator, the whole test model was made of aluminum and acted as a covered electrode of the symmetrical plasma actuator. The experimental study of plasma actuators' effect on surrounding air, a canonical zero-pressure gradient turbulent boundary, was carried out using particle image velocimetry(PIV) and laser Doppler velocimetry(LDV) in the 0.75 m × 0.75 m low speed wind tunnel to reveal the symmetrical plasma actuator characterization in an external flow. A half model of wing-body configuration was experimentally investigated in the  3.2 m low speed wind tunnel with a six-component strain gauge balance and PIV. The results show that the turbulent boundary layer separation of wing can be obviously suppressed and the maximum lift coefficient is improved at high Reynolds number with the symmetrical plasma actuator. It turns out that the maximum lift coefficient increased by approximately 8.98% and the stall angle of attack was delayed by approximately 2° at Reynolds number2 ×10~6. The effective mechanism for the turbulent separation control by the symmetrical plasma actuators is to induce the vortex near the wing surface which could create the relatively largescale disturbance and promote momentum mixing between low speed flow and main flow regions.     

Proportional fuzzy feed-forward architecture control validation by wind tunnel tests of a morphing wing

In aircraft wing design, engineers aim to provide the best possible aerodynamic performance under cruise flight conditions in terms of lift-to-drag ratio. Conventional control sur-faces such as flaps, ailerons, variable wing sweep and spoilers are used to trim the aircraft for other flight conditions. The appearance of the morphing wing concept launched a new challenge in the area of overall wing and aircraft performance improvement during different flight segments by locally altering the flow over the aircraft's wings. This paper describes the development and appli-cation of a control system for an actuation mechanism integrated in a new morphing wing structure. The controlled actuation system includes four similar miniature electromechanical actuators dis-posed in two parallel actuation lines. The experimental model of the morphing wing is based on a full-scale portion of an aircraft wing, which is equipped with an aileron. The upper surface of the wing is a flexible one, being closed to the wing tip; the flexible skin is made of light composite materials. The four actuators are controlled in unison to change the flexible upper surface to improve the flow quality on the upper surface by delaying or advancing the transition point from laminar to turbulent regime. The actuators transform the torque into vertical forces. Their bases are fixed on the wing ribs and their top link arms are attached to supporting plates fixed onto the flex-ible skin with screws. The actuators push or pull the flexible skin using the necessary torque until the desired vertical displacement of each actuator is achieved. The four vertical displacements of the actuators, correlated with the new shape of the wing, are provided by a database obtained through a preliminary aerodynamic optimization for specific flight conditions. The control system is designed to control the positions of the actuators in real time in order to obtain and to maintain the desired shape of the wing for a specified flight condition. The feasibility and effectiveness of the developed control system by use of a proportional fuzzy feed-forward methodology are demon-strated experimentally through bench and wind tunnel tests of the morphing wing model.     

Flow separation control on swept wing with nanosecond pulse driven DBD plasma actuators

A 15° swept wing with dielectric barrier discharge plasma actuator is designed.Experimental study of flow separation control with nanosecond pulsed plasma actuation is performed at flow velocity up to 40 m/s. The effects of the actuation frequency and voltage on the aerodynamic performance of the swept wing are evaluated by the balanced force and pressure measurements in the wind tunnel. At last, the performances on separation flow control of the three types of actuators with plane and saw-toothed exposed electrodes are compared. The optimal actuation frequency for the flow separation control on the swept wing is detected, namely the reduced frequency is 0.775, which is different from 2-D airfoil separation control. There exists a threshold voltage for the low swept wing flow control. Before the threshold voltage, as the actuation voltage increases, the control effects become better. The maximum lift is increased by 23.1% with the drag decreased by 22.4% at 14°, compared with the base line. However, the best effects are obtained on actuator with plane exposed electrode in the low-speed experiment and the abilities of saw-toothed actuators are expected to be verified under high-speed conditions.     

扑翼非定常运动对平尾影响及俯仰力矩特性研究

为了研究微型扑翼飞行器尾流对其平尾设计、飞行器稳定性以及飞行控制的影响,选取微型扑翼飞行器ASN-211为原模型,采用将其简化为二维的前后串列翼模型进行具体计算和分析。首先以Fluent动网格技术为背景,在用户自定义函数控制扑翼的非定常运动条件下进行不可压、非定常二维流动的计算,并研究在扑翼非定常运动条件下的模型的俯仰力矩特性。然后通过计算不同来流攻角、扑翼扑动频率、扑翼与平尾间距以及不同力矩中心下扑翼、平尾及总的力矩系数,讨论各个参数对力矩特性的影响。最后得出不同的扑翼扑动频率以及扑翼与平尾间距将会对平尾与扑翼的俯仰力矩间的相位差产生影响,所得结论为扑翼飞机的重心布置设计提供参考。     

超临界机翼介质阻挡放电等离子体流动控制

为了进一步提高等离子体激励器可控雷诺数,采用测力以及粒子图像测速(PIV)等研究方法,从二维机翼到三维半模,从低雷诺数到高雷诺数,开展了对称布局式介质阻挡放电(DBD)等离子体激励器控制超临界机翼气动特性的试验研究,分析了控制机理,实现了等离子体"虚拟舵面"的功能。结果表明:在雷诺数为2×10⁶的情况下,对称布局式等离子体气动激励能较好地抑制超临界机翼绕流流场分离,使失速迎角推迟2°,最大升力系数提高8.98%。