OSIRIS-REx: Sample Return from Asteroid (101955) Bennu

In May of 2011, NASA selected the Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer (OSIRIS-REx) asteroid sample return mission as the third mission in the New Frontiers program. The other two New Frontiers missions are New Horizons, which explored Pluto during a flyby in July 2015 and is on its way for a flyby of Kuiper Belt object 2014 MU69 on January 1, 2019, and Juno, an orbiting mission that is studying the origin, evolution, and internal structure of Jupiter. The spacecraft departed for near-Earth asteroid (101955) Bennu aboard an United Launch Alliance Atlas V 411 evolved expendable launch vehicle at 7:05 p.m. EDT on September 8, 2016, on a seven-year journey to return samples from Bennu. The spacecraft is on an outbound-cruise trajectory that will result in a rendezvous with Bennu in November 2018. The science instruments on the spacecraft will survey Bennu to measure its physical, geological, and chemical properties, and the team will use these data to select a site on the surface to collect at least 60 g of asteroid regolith. The team will also analyze the remote-sensing data to perform a detailed study of the sample site for context, assess Bennu’s resource potential, refine estimates of its impact probability with Earth, and provide ground-truth data for the extensive astronomical data set collected on this asteroid. The spacecraft will leave Bennu in 2021 and return the sample to the Utah Test and Training Range (UTTR) on September 24, 2023.

     

OSIRIS-REx Flight Dynamics and Navigation Design

OSIRIS-REx is the first NASA mission to return a sample of an asteroid to Earth. Navigation and flight dynamics for the mission to acquire and return a sample of asteroid 101955 Bennu establish many firsts for space exploration. These include relatively small orbital maneuvers that are precise to ～1 mm/s, close-up operations in a captured orbit about an asteroid that is small in size and mass, and planning and orbit phasing to revisit the same spot on Bennu in similar lighting conditions. After preliminary surveys and close approach flyovers of Bennu, the sample site will be scientifically characterized and selected. A robotic shock-absorbing arm with an attached sample collection head mounted on the main spacecraft bus acquires the sample, requiring navigation to Bennu’s surface. A touch-and-go sample acquisition maneuver will result in the retrieval of at least 60 grams of regolith, and up to several kilograms. The flight activity concludes with a return cruise to Earth and delivery of the sample return capsule (SRC) for landing and sample recovery at the Utah Test and Training Range (UTTR).     

The OSIRIS-REx Visible and InfraRed Spectrometer (OVIRS): Spectral Maps of the Asteroid Bennu

The OSIRIS-REx Visible and Infrared Spectrometer (OVIRS) is a point spectrometer covering the spectral range of 0.4 to 4.3 microns (25,000–2300 cm^?1). Its primary purpose is to map the surface composition of the asteroid Bennu, the target asteroid of the OSIRIS-REx asteroid sample return mission. The information it returns will help guide the selection of the sample site. It will also provide global context for the sample and high spatial resolution spectra that can be related to spatially unresolved terrestrial observations of asteroids. It is a compact, low-mass (17.8 kg), power efficient (8.8 W average), and robust instrument with the sensitivity needed to detect a 5% spectral absorption feature on a very dark surface (3% reflectance) in the inner solar system (0.89–1.35 AU). It, in combination with the other instruments on the OSIRIS-REx Mission, will provide an unprecedented view of an asteroid’s surface.     

Regolith X-Ray Imaging Spectrometer (REXIS) Aboard the OSIRIS-REx Asteroid Sample Return Mission

The Regolith X-ray Imaging Spectrometer (REXIS) is the student collaboration experiment proposed and built by an MIT-Harvard team, launched aboard NASA’s OSIRIS-REx asteroid sample return mission. REXIS complements the scientific investigations of other OSIRIS-REx instruments by determining the relative abundances of key elements present on the asteroid’s surface by measuring the X-ray fluorescence spectrum (stimulated by the natural solar X-ray flux) over the range of energies 0.5 to 7 keV. REXIS consists of two components: a main imaging spectrometer with a coded aperture mask and a separate solar X-ray monitor to account for the Sun’s variability. In addition to element abundance ratios (relative to Si) pinpointing the asteroid’s most likely meteorite association, REXIS also maps elemental abundance variability across the asteroid’s surface using the asteroid’s rotation as well as the spacecraft’s orbital motion. Image reconstruction at the highest resolution is facilitated by the coded aperture mask. Through this operation, REXIS will be the first application of X-ray coded aperture imaging to planetary surface mapping, making this student-built instrument a pathfinder toward future planetary exploration. To date, 60 students at the undergraduate and graduate levels have been involved with the REXIS project, with the hands-on experience translating to a dozen Master’s and Ph.D. theses and other student publications.     

The OSIRIS-REx Radio Science Experiment at Bennu

The OSIRIS-REx mission will conduct a Radio Science investigation of the asteroid Bennu with a primary goal of estimating the mass and gravity field of the asteroid. The spacecraft will conduct proximity operations around Bennu for over 1 year, during which time radiometric tracking data, optical landmark tracking images, and altimetry data will be obtained that can be used to make these estimates. Most significantly, the main Radio Science experiment will be a 9-day arc of quiescent operations in a 1-km nominally circular terminator orbit. The pristine data from this arc will allow the Radio Science team to determine the significant components of the gravity field up to the fourth spherical harmonic degree. The Radio Science team will also be responsible for estimating the surface accelerations, surface slopes, constraints on the internal density distribution of Bennu, the rotational state of Bennu to confirm YORP estimates, and the ephemeris of Bennu that incorporates a detailed model of the Yarkovsky effect.     

The New Horizons Spacecraft

The New Horizons spacecraft was launched on 19 January 2006. The spacecraft was designed to provide a platform for seven instruments designated by the science team to collect and return data from Pluto in 2015. The design meets the requirements established by the National Aeronautics and Space Administration (NASA) Announcement of Opportunity AO-OSS-01. The design drew on heritage from previous missions developed at The Johns Hopkins University Applied Physics Laboratory (APL) and other missions such as Ulysses. The trajectory design imposed constraints on mass and structural strength to meet the high launch acceleration consistent with meeting the AO requirement of returning data prior to the year 2020. The spacecraft subsystems were designed to meet tight resource allocations (mass and power) yet provide the necessary control and data handling finesse to support data collection and return when the one-way light time during the Pluto fly-by is 4.5 hours. Missions to the outer regions of the solar system (where the solar irradiance is 1/1000 of the level near the Earth) require a radioisotope thermoelectric generator (RTG) to supply electrical power. One RTG was available for use by New Horizons. To accommodate this constraint, the spacecraft electronics were designed to operate on approximately 200 W. The travel time to Pluto put additional demands on system reliability. Only after a flight time of approximately 10 years would the desired data be collected and returned to Earth. This represents the longest flight duration prior to the return of primary science data for any mission by NASA. The spacecraft system architecture provides sufficient redundancy to meet this requirement with a probability of mission success of greater than 0.85. The spacecraft is now on its way to Pluto, with an arrival date of 14 July 2015. Initial in-flight tests have verified that the spacecraft will meet the design requirements.     

Formulation of discovery-class mission concepts

A key feature of the NASA discovery programs is the strategy of allowing a single scientist with a "good idea" to form his/her own team of scientists and engineers to generate a concept which is credible and attractive to a complete body of independent peers. The principle investigator (PI) must accept responsibility for all aspects of the mission. A wide variety of mission types have been found to fit the discovery mold, including fly-bys, orbiters, landers and even sample return missions. To enhance this fit, it has been necessary for scientists and engineers to work closely in: evaluating spacecraft risks, setting data throughput requirements and methods of their amelioration, focusing on key objectives, and deriving strict instrument and experiment requirements from overall goals and engineering realities. Discovery is loaded with challenges, but likewise, represents the most promising opportunities for affordable, frequent scientific advances in planetary exploration.     

Chemical Composition of Icy Satellite Surfaces

Much of our knowledge of planetary surface composition is derived from remote sensing over the ultraviolet through infrared wavelength ranges. Telescopic observations and, in the past few decades, spacecraft mission observations have led to the discovery of many surface materials, from rock-forming minerals to water ice to exotic volatiles and organic compounds. Identifying surface materials and mapping their distributions allows us to constrain interior processes such as cryovolcanism and aqueous geochemistry. The recent progress in understanding of icy satellite surface composition has been aided by the evolving capabilities of spacecraft missions, advances in detector technology, and laboratory studies of candidate surface compounds. Pioneers 10 and 11, Voyagers I and II, Galileo, Cassini and the New Horizons mission have all made significant contributions. Dalton (Space Sci. Rev., 2010, this issue) summarizes the major constituents found or inferred to exist on the surfaces of the icy satellites (cf. Table 1 from Dalton, Space Sci. Rev., 2010, this issue), and the spectral coverage and resolution of many of the spacecraft instruments that have revolutionized our understanding (cf. Table 2 from Dalton, Space Sci. Rev., 2010, this issue). While much has been gained from these missions, telescopic observations also continue to provide important constraints on surface compositions, especially for those bodies that have not yet been visited by spacecraft, such as Kuiper Belt Objects (KBOs), trans-Neptunian Objects (TNOs), Centaurs, the classical planet Pluto and its moon, Charon. In this chapter, we will discuss the major satellites of the outer solar system, the materials believed to make up their surfaces, and the history of some of these discoveries. Formation scenarios and subsequent evolution will be described, with particular attention to the processes that drive surface chemistry and exchange with interiors. Major similarities and differences between the satellites are discussed, with an eye toward elucidating processes operating throughout the outer solar system. Finally we discuss the outermost satellites and other bodies, and summarize knowledge of their composition. Much of this review is likely to change in the near future with ongoing and planned outer planet missions, adding to the sense of excitement and discovery associated with our exploration of our planetary neighborhood.     

The IMAGE Observatory

The Imager for Magnetopause-to-Aurora Global Exploration (IMAGE) mission will be the first of the new Medium-class Explorer (MIDEX) missions to fly. IMAGE will utilize a combination of ultraviolet and neutral atom imaging instruments plus an RF sounder to map and image the temporal and spatial features of the magnetosphere. The eight science sensors are mounted to a single deckplate. The deckplate is enveloped in an eight-sided spacecraft bus, 225 cm across the flats, developed by Lockheed Martin Missiles and Space Corporation. Constructed of laminated aluminum honeycomb panels, covered extensively by Gallium Arsenide solar cells, the spacecraft structure is designed to withstand the launch loads of a Delta 7326-9.5 ELV. Attitude control is via a single magnetic torque rod and passive nutation damper with aspect information provided by a star camera, sun sensor, and three-axis magnetometer. A single S-band transponder provides telemetry and command functionality. Interfaces between the self-contained payload and the spacecraft are limited to MIL-STD-1553 and power. This paper lists the requirements that drove the design of the IMAGE Observatory and the implementation that met the requirements.     

Dynamo Models for Planets Other Than Earth

Observations from planetary spacecraft missions have demonstrated a spectrum of dynamo behaviour in planets. From currently active dynamos, to remanent crustal fields from past dynamo action, to no observed magnetization, the planets and moons in our solar system offer magnetic clues to their interior structure and evolution. Here we review numerical dynamo simulations for planets other than Earth. For the terrestrial planets and satellites, we discuss specific magnetic field oddities that dynamo models attempt to explain. For the giant planets, we discuss both non-magnetic and magnetic convection models and their ability to reproduce observations of surface zonal flows and magnetic field morphology. Future improvements to numerical models and new missions to collect planetary magnetic data will continue to improve our understanding of the magnetic field generation process inside planets.     

载人小行星探测的飞行模式简

基于载人小行星探测的任务背景,根据其基本的飞行阶段及任务特点,对其探测任务的飞行模式进行分析,其中包括探测器逃逸地球的飞行方式、小行星表面探测方式、返回与再入的飞行方式,重点研究小行星表面探测方式.对运载能力、技术难度、探测器质量规模进行了分析与比较,得出基于着陆对接口概念的近地＋对接着陆＋直接再入的较优的飞行模式,并将该模式进一步划分为9个飞行节点及6个主要飞行阶段,对其飞行过程进行了详细的描述.     

Scientific Planning and Commanding of the Rosetta Payload

ESA’s Rosetta mission was launched in March 2004 and is on its way to comet 67P/Churyumov-Gerasimenko, where it is scheduled to arrive in summer 2014. It comprises a payload of 12 scientific instruments and a Lander. All instruments are provided by Principal Investigators, which are responsible for their operations. As for most ESA science missions, the ground segment of the mission consists of a Mission Operations Centre (MOC) and a Science Operations Centre (SOC). While the MOC is responsible for all spacecraft-related aspects and the final uplink of all command timelines to the spacecraft, the scientific operations of the instruments and the collection of the data and ingestion into the Planetary Science Archive are coordinated by the SOC. This paper focuses on the tasks of the SOC and in particular on the methodology and constraints to convert the scientific goals of the Rosetta mission to operational timelines.     

The Genesis Discovery Mission: Return of Solar Matter to Earth

The Genesis Discovery mission will return samples of solar matter for analysis of isotopic and elemental compositions in terrestrial laboratories. This is accomplished by exposing ultra-pure materials to the solar wind at the L1 Lagrangian point and returning the materials to Earth. Solar wind collection will continue until April 2004 with Earth return in Sept. 2004. The general science objectives of Genesis are to (1) to obtain solar isotopic abundances to the level of precision required for the interpretation of planetary science data, (2) to significantly improve knowledge of solar elemental abundances, (3) to measure the composition of the different solar wind regimes, and (4) to provide a reservoir of solar matter to serve the needs of planetary science in the 21st century. The Genesis flight system is a sun-pointed spinner, consisting of a spacecraft deck and a sample return capsule (SRC). The SRC houses a canister which contains the collector materials. The lid of the SRC and a cover to the canister were opened to begin solar wind collection on November 30, 2001. To obtain samples of O and N ions of higher fluence relative to background levels in the target materials, an electrostatic mirror (‘concentrator’) is used which focuses the incoming ions over a diameter of about 20 cm onto a 6 cm diameter set of target materials. Solar wind electron and ion monitors (electrostatic analyzers) determine the solar wind regime present at the spacecraft and control the deployment of separate arrays of collector materials to provide the independent regime samples. This revised version was published online in August 2006 with corrections to the Cover Date.     

Deep Impact: The Anticipated Flight Data

A comprehensive observational sequence using the Deep Impact (DI) spacecraft instruments (consisting of cameras with two different focal lengths and an infrared spectrometer) will yield data that will permit characterization of the nucleus and coma of comet Tempel 1, both before and after impact by the DI Impactor. Within the constraints of the mission system, the planned data return has been optimized. A subset of the most valuable data is planned for return in near-real time to ensure that the DI mission success criteria will be met even if the spacecraft should not survive the comet’s closest approach. The remaining prime science data will be played back during the first day after the closest approach. The flight data set will include approach observations spanning the 60 days prior to encounter, pre-impact data to characterize the comet at high resolution just prior to impact, photos from the Impactor as it plunges toward the nucleus surface (including resolutions exceeding 1 m), sub-second time sampling of the impact event itself from the Flyby spacecraft, monitoring of the crater formation process and ejecta outflow for over 10 min after impact, observations of the interior of the fully formed crater at spatial resolutions down to a few meters, and high-phase lookback observations of the nucleus and coma for 60 h after closest approach. An inflight calibration data set to accurately characterize the instruments’ performance is also planned. A ground data processing pipeline is under development at Cornell University that will efficiently convert the raw flight data files into calibrated images and spectral maps as well as produce validated archival data sets for delivery to NASA’s Planetary Data System within 6 months after the Earth receipt for use by researchers world-wide.     

基于航天测控的实时仿真系统设计

航天器发射试验具有高风险性,而承担航天器测控的测控系统规模庞大、关系复杂,其测控设备、软件的正确性关系到试验成败。仿真技术的广泛应用,使设备、软件的正确性在发射任务前就可以得到充分验证,从而提高发射试验的安全性。以航天器试验任务为背景设计的实时仿真系统,在航天测量船上得到了成功应用,取得了良好的效果。     

Instrument Data Processing Unit for THEMIS

The Time History of Events and Macroscale Interactions during Substorms (THEMIS) mission is a NASA Medium-class Explorer (MIDEX) mission, launched on February 17, 2007. The mission employs five identical micro-satellites, or “probes,” which line-up along the Earth’s magnetotail every four days in conjunctions to determine the trigger and large-scale evolution of magnetic substorms. The probes are equipped with a comprehensive suite of instruments that measure and track the motion of thermal and super-thermal ions and electrons, and electric and magnetic fields, at key regions in the magnetosphere. Primary science objectives require high data rates at periods of scientific interest, large data volumes, and control of science data collection on suborbital time scales. A central Instrument Data Processing Unit (IDPU) is necessary to organize and prioritize the data from the large number of instruments into a 200 MB solid state memory. The large data volume produced by the instruments requires a flexible memory capable of both high resolution snapshots during conjunctions and coarser survey data collection throughout the orbit. Onboard triggering algorithms select and prioritize the snapshots based on data quality to optimize the science data that is returned to the ground. This paper presents a detailed discussion of the hardware and software design of the THEMIS IDPU, describing the heritage design that has been fundamental to the THEMIS mission success so far.     

Autonomy architecture for aerobot exploration of Saturnian moon Titan

The Huygens probe arrived at Saturn's moon, Titan, January 14,2005, unveiling a world that is radically different from any other in the solar system. The data obtained, complemented by continuing observations from the Cassini spacecraft, show methane lakes, river channels and drainage basins, sand dunes, cryovolcanos and sierras. This has led to an enormous scientific interest in a follow-up mission to Titan, using a robotic lighter-than-air vehicle (or aerobot). Aerobots have modest power requirements, can fly missions with extended durations, and have very long distance traverse capabilities. They can execute regional surveys, transport and deploy scientific instruments and in-situ laboratory facilities over vast distances, and also provide surface sampling at strategic science sites. This describes our progress in the development of the autonomy technologies that will be required for exploration of Titan. We provide an overview of the autonomy architecture and some of its key components. We also show results obtained from autonomous flight tests conducted in the Mojave Desert.     

Extraterrestrial Organic Matter and the Detection of Life

A fundamental goal of a number of forthcoming space missions is the detection and characterization of organic matter on planetary surfaces. Successful interpretation of data generated by in situ experiments will require discrimination between abiogenic and biogenic organic compounds. Carbon-rich meteorites provide scientists with examples of authentic extraterrestrial organic matter generated in the absence of life. Outcomes of meteorite studies include clues to protocols that will enable the unequivocal identification of organic matter derived from life. In this chapter we summarize the diagnostic abiogenic features of key compound classes involved in life detection and discuss their implications for analytical instruments destined to fly on future spacecraft missions.