相控阵天线方向图仿真与分析

相控阵天线目前广泛应用于雷达中,促进了多目标、多任务雷达的发展。但随着电扫描角度的变化,其诸多指标也随之变化,对雷达的性能产生直接影响,因而对相控阵天线方向图进行实时定量分析具有重要意义。文章基于相控阵天线的基本原理,利用LabVIEW语言开发了相控阵天线方向图仿真软件。软件设置了相控阵天线各影响参数的输入控件,通过图形和数值2种方式进行仿真结果的显示,并以表格文件存储。通过不同条件下的仿真结果对比分析,软件可合理有效地对相控阵天线方向图进行实时定量的仿真分析,可应用于相控阵雷达的性能分析和评估中。     

Retention Probability in a Track-While-Scan Radar

The probability of maintaining the track file, after acquisition in a track-while-scan (TWS) radar, has been formulated and computed under various conditions of initial range, velocity, and track drop time. All calculations are based on a predetermined update probability versus range characteristic. Results, obtainable with a digital computer in just seconds of computing time, readily demonstrate the relative superiority of retention characteristics achievable for TWS radar with an electronically steerable array antenna.     

反向交叉眼对单脉冲雷达干扰效果分析及仿真验证

交叉眼干扰被认为是对单脉冲雷达干扰最有效的方式之一。基于雷达方程建立了隔离平台回波下的两点源反向交叉眼干扰模型，推导了交叉眼干扰欺骗角一般性公式，研究了干扰机发射天线间距、干扰平台旋转角和干扰机相对雷达之间距离等参数变化对角度欺骗效果的影响，并依据单脉冲雷达接收机获取角度的信息处理流程，建立了单脉冲雷达接收机仿真模型，对交叉眼数学模型的正确性和局限性进行了分析。研究结果表明：单脉冲雷达越靠近两点源交叉眼干扰机中心线、干扰机两发射天线间距越大、与干扰机距离越近时，角度欺骗效果越好；单脉冲雷达的欺骗角度随着与干扰机距离的接近呈指数式增大；数学模型和仿真模型计算的单脉冲雷达角度误差最大值随干扰机天线与雷达天线中心连线的夹角的增大呈指数化增长。研究可为交叉眼干扰工程设计作参考。     

Development of airborne moving target radar for long range surveillance

The following topics are discussed in the context of the development of an airborne moving target radar for long range surveillance: US Navy long range shipborne radar; Cadillac I airborne early warning (AEW) radar; Cadillac II airborne early warning (AEW) radar; airborne moving target indicating (AMTI) radar; related post-war radar activities; and the invention of the displaced center antenna. Among the topics studied is the use of a monopulse antenna in an MTI radar to remove the degradation of the MTI caused by rapid scanning of the antenna. A method of using a monopulse antenna for motion compensation in airborne MTI is discussed.<>     

基于CCD激光经纬仪测量的舰载雷达标校方法

介绍了一种利用激光测距仪测距、CCD光学经纬仪测角对动态的舰载雷达天线进行定位的雷达标校方法。探讨了对动态目标的定位原理,给出了真值测量的数学模型,论证了方位标的设计原则,分析了雷达标校的精度。     

频率选择表面机载雷达天线的研究

研究了降低机载雷达天线散射截面的频率选择表面(FSS)极化扭转板。根据Floquet定理利用模式电压概念建立矢量模式,对二维周期阵列的频率选择表面进行理论分析和计算。设计并加工了一种降低机载雷达天线散射载面的频率选择表面极化扭转板结构。计算和实验表明:频率选择表面的极化扭转板在雷达天线工作通带内保持与原极化扭转板的性能不变,而在工作通带外具有降低雷达散射载面的效果。降低雷达散射截面7～10dB。     

The untold Pearl Harbor radar story

Ever wonder what happened to the radar set that detected the Japanese aircraft before the raid on Pearl Harbor? This article reveals the fate of that SCR-270 radar set; describes some of the radar development background; and includes typical results of a World War II command, control and communications system that used the SCR-270 as its backbone radar. The SCR-270 was a radio-echo detection and direction finding set for locating aircraft. It operated by transmitting a short-duration pulse of high frequency radio waves, which would be reflected or re-radiated by any metallic or conducting surface within the field of the directive transmitting antenna; therefore, one or more aircraft within the antenna field appeared as a source of reflected radio waves. Rotating the antenna which also served as the receiving antenna, provided a means for determining the azimuth or direction of aircraft. The system measured the time it took a blip or reflected return from the target to appear on a cathode ray tube indicator, to give the distance or range to the detected aircraft. The maximum range of the radar was about 250 miles up to 50,000 feet under all atmospheric conditions including rain, mist, smoke or fog, and during daylight or darkness. The azimuth and range data supplied by the set permitted the plotting of the location of detected aircraft on maps. Major performance characteristics of the radar are provided in the included table     

Performance analysis of radar antenna systems

If modern airborne radar systems are to function properly, the radar antenna radiation patterns must meet certain specifications. Until recently, most radar antennas were designed and tested in a clean antenna environment, i.e., there is no near field scattering from host structures or radome effects. However, these higher order effects are the matter of increasing concern with added performance demands in the ever-increasing jammer and clutter interference environments. We investigated the capabilities and limitations of currently available analysis techniques and computer codes for installed performance of airborne radar antenna systems. Then we developed an extended ray-optical technique that could predict total installed performance of airborne radar antenna systems, i.e., the near field scattering from aircraft structures and radome effects. The new analysis technique utilized a ray-tracing method in both airframe and radome simulation. Thus, it can efficiently predict the total installed performance of large radar antenna systems on an aircraft structure     

Reentry Vehicle Radar Altimeter Antenna Patterns

An analytical technique is proposed for investigating the effect of antenna pattern shape on reentry vehicle radar altimeter performance. Initially, a method is presented that computes the average performance under all roll positions. This method is then extended to allow performance to be determined at each roll position. Some numerical results are included that show roll effects for a typical antenna pattern.     

飞机雷达天线系统隐身技术研究

分析了由飞机雷达罩、雷达天线和雷达舱内高频部件构成的雷达天线系统的散射特性,并研究了其隐身机理和隐身措施.提出了飞机雷达舱气动,隐身,结构一体化设计概念.     

An approach to radiated testing of installed airborne Doppler radarwith weather/windshear detection capability

Numerous documents were reviewed to verify radar parameters needed to analyze and present the tester concept described herein. The weather and windshear models defined use the identical criteria established for the Doppler radar in terms of F-factor. The basic concept of the tester is to transmit coherent simulated radar returns in response to the airborne radar's transmission while mounted on a tripod in the far field of the radar when parked on the ramp. The varying amplitude of the received radar pulses are analyzed and put into memory as the tester antenna is illuminated by the scanning main beam and side lobes of the radar's antenna patterns. The tester controls the power of its outputted simulated radar returns in inverse relation to the power of the received radar pulses. These simulated radar returns, outputted into the main beam and/or side lobes of the scanning radar antenna, are interpreted by the radar system as received in the main lobe. The tester transmissions, incorporating microburst, storm and gust front models, previously defined, can thereby test the aircraft radar system performance in various hazard environments. The tester is designed to: verify operational performance of the radar; demonstrate installed radar performance; verify crew reports and minimize radar or LRU's removal for maintenance; test before and after a repair; and verify radome effects on radar performance     

反辐射武器采用幅度检测抗诱饵技术探讨

针对反辐射武器面临的有源诱偏威胁,分析诱饵系统与主雷达在空间布局上的特点,提出转动PRS（被动雷达导引头）接收天线,然后根据信号幅度变化信息将各辐射源区分开的新方法。以抗3点源诱偏为例,从幅度分辨能力、平台运动和雷达天线波束扫描对幅度检测的影响等方面分析说明方法的可行性,并通过试验验证了,PRS可通过提高幅度分辨能力来提高角度分辨抗诱偏能力,同时说明了其在时域分辨、门限检测、天线伺服控制等方面需满足的条件。     

On the Design of a Large Aperture Radar for Target Imaging

This paper describes the design, construction, and performance of an experimental radar, in which an electronically scanned X-band array is employed as the receiving antenna. Backscatter from targets uniformly illuminated from a separate transmitting antenna is intercepted by 128 horn antennas, unequally spaced over a nine-foot circular aperture. The received signals are processed electronically to provide a complete scan of a 30X30 degree field every ten milliseconds. Resulting target images were displayed on a cathode ray tube and recorded on 16-mm motion picture film, for varying conditions of target motion using monochromatic and frequency-modulated X-band illumination. Sequences of motion picture frames obtained from a rotating copper cone are presented, which demonstrate significant changes in the image and side-lobe interference patterns for small changes in target aspect angle. Side-lobe interference effects were reduced by integrating many antenna scans as the target rotated; a clear image of a foil letter R is presented that demonstrated this result. The main objective of this work was to test this radar technique as an approach to target recognition.     

Implementing digital terrain data in knowledge-aided space-time adaptive processing

Many practical problems arise when implementing digital terrain data in airborne knowledge-aided (KA) space-time adaptive processing (STAP). This paper addresses these issues and presents solutions with numerical implementations. In particular, using digital land classification data and digital elevation data, techniques are developed for registering these data with radar return signals, correcting for Doppler and spatial misalignments, adjusting for antenna gain, characterizing clutter patches for secondary data selection, and ensuring independent secondary data samples. These techniques are applied to select secondary data for a single-bin post-Doppler STAP algorithm using multi-channel airborne radar measurement (MCARM) program data. Results with the KA approach are compared with those obtained using the standard sliding window method for choosing secondary data. These results illustrate the benefits of using terrain information, a priori data about the radar, and the importance of statistical independence when selecting secondary data for improving STAP performance     

Computation of aircraft geometric height under radar surveillance

A radar system for geometric height estimation of civil aircraft is described. The system consists of one standard or mode S secondary surveillance radar (SSR) and one omnidirectional antenna sited away from SSR under an airplane. The geometric height is derived by trilateration. Systematic errors are compensated for by deriving the profile of the effect on height measurements of the bias in range measurements. A curve-fitting technique is then used, which estimates both the geometric height and any non-zero systematic errors     

Radio Interference in Helicopter-Borne Pulse Doppler Radars

Radio interference generated in a helicopter-borne pulse Doppler radar system due to rotating blades is analyzed for the case that blades are located in the far field region of the radar antenna. A first-order estimate of the blade interference power spectrum is obtained as a function of antenna depression angle and radar (helicopter) altitude and speed. Numerical calculations show that blade interference is very weak compared with the direct ground clutter. It extends, however, into the clutter-free region which causes false alarms and degrades the radar performance.     

海面低飞情况下机载航管二次雷达覆盖研究

二次雷达较之一次雷达有许多优点，使其在军用和民用领域得到广泛应用。但当装有航管二次雷达的飞机在海面低飞时，会出现常见的多径效应现象。文章详细分析了飞机机体和海面对航管二次雷达方向图的影响，并利用HFSS软件对飞机在海面低飞时航管二次雷达方向图进行仿真。结果表明，海面影响航管二次雷达的方向图并导致根据其分叉变形，根据平面对天线方向图的影响及其计算公式，对不同飞行高度的方向图进行了计算，得出了在海面低飞时的最佳飞行高度。     

弹载主被动复合雷达天线配置方案

针对弹载雷达发展需求,探讨了实现弹载主被动复合雷达天线的技术途径。针对双频反射面天线,提出了一种双频反射面天线的配置方案；针对宽带复合天线,研究了被动模式宽带天线的选型和主动模式天线的设计方案,提出了宽带复合天线的配置方案。     

天线测量理论中的基本方程组

提出了天线远场测量理论中的基本方程组,并由此导出目标的雷达散射截面、天线增益以及天线系数等参数的重要计算公式。     

Radar beamwidth reduction techniques

It is essential and desirable to get a high resolution echo in a radar image without using a large antenna. On scanning a radar antenna, the target's distribution is smoothed by the antenna beam and a smeared echo appears on the radar display. This paper describes three different types of beam compression radars: subsurface SAR; correlation array radar; and inversion processed radar. The experimental results show that the beamwidth on display was effectively compressed by the signal processing