Mesospheric doppler wind measurements from Aura Microwave Limb Sounder (MLS)

This paper describes a microwave limb technique for measuring Doppler wind in the Earth’s mesosphere. The research algorithm has been applied to Aura Microwave Limb Sounder (MLS) 118.75 GHz measurements where the O₂ Zeeman lines are resolved by a digital autocorrelation spectrometer. A precision of ∼17 m/s for the line-of-sight (LOS) wind is achieved at 80–92 km, which corresponds to radiometric noise during 1/6 s integration time. The LOS winds from Aura MLS are mostly in the meridional direction at low- and mid-latitudes with vertical resolution of ∼8 km. This microwave Doppler technique has potential to obtain useful winds down to ∼40 km of the Earth’s atmosphere if measurements from other MLS frequencies (near H₂O, O₃, and CO lines) are used. Initial analyses show that the MLS winds from the 118.75 GHz measurements agree well with the TIDI (Thermosphere Ionosphere Mesosphere Energetics and Dynamics Doppler Interferometer) winds for the perturbations induced by a strong quasi 2-day wave (QTDW) in January 2005. Time series of MLS winds reveal many interesting climatological and planetary wave features, including the diurnal, semidiurnal tides, and the QTDW. Interactions between the tides and the QTDW are clearly evident, indicating possible large tidal structural changes after the QTDW events dissipate.     

Stellar infrared astronomy with EDISON

In this review the IR emission from circumstellar material is discussed, both of ionized gas and dust grains, and the astrophysical information that can be extracted from such observations. Some emphasis is placed on the possibilities of stellar IR astronomy using a large space-borne telescope, especially with respect to the much better spatial and spectral resolution of such a telescope compared to the current generation of ground-based and space IR telescopes.     

Tests of Direct-Sampling Coherent Detection with a Laboratory Analog-to-Digital Converter

Phase accuracy and simplicity advantages of a direct-sampling coherent detection (DCD) system were demonstrated by computer simulation in earlier correspondence. This correspondence reviews the DCD approach and reports the results of experiments involving digitized samples of analog signals taken by a high-quality, off-the-shelf A/Dconverter. IF signals near 10, 20, and 30 MHz were sampled at 5 MHzresulting in rms DCD phase errors generally below 0.50 compared witherrors less than 0.20 computed in the earlier simulations.     

Early Data from Aura and Continuity from Uars and Toms

Aura, the last of the large EOS observatories, was launched on July~15, 2004. Aura is designed to make comprehensive stratospheric and tropospheric composition measurements from its four instruments, HIRDLS, MLS, OMI and TES. These four instruments work in synergy to provide data on ozone trends, air quality and climate change. The instruments observe in the nadir and limb and provide the best horizontal and vertical resolution ever achieved from space. After over one year in orbit the instruments are nearly operational and providing data to the scientific community. We summarize the mission, instruments, and initial results and give examples of how Aura will provide continuity to earlier chemistry missions.     

Adaptive Radar Beacon Forming

Propagation errors along paths between an array radar and a distribution of targets cause degradations in angle measurements and detection range. The overall objective of the research described in this paper was to analyze and demonstrate the use of conjugate reflections for compensating adverse effects of path errors. The effect of reflecting the conjugate of an incident wave is described mathematically and is demonstrated by computer simulation. Repeated conjugate reflections are shown to result in the formation of a single beam usually focussed on a target highlight. Echoes from this spatial reference, or "beacon" are shown to provide the means by which aperture phase errors may be effectively compensated. Results of radar simulations include two-way patterns computed for an example involving a distribution of three-point targets and half-wave-length Gaussian aperture errors. Without compensation a gain loss of 12 dB is computed; with error correction, based on echoes from an adaptively focussed beam, the two-way pattern is within a small fraction of a dB of the ideal pattern. The effect of noise on adaptive beacon forming was considered for a case involving one target. Repeated conjugate reflections improve signal-to-noise ratio as long as the effect of noise is less than the effect of aperture dephasing on the power reflected back to the target. An example is presented in which signal-to-noise ratio at the output of the receiver combining network is increased from 4 to 11.8 dB.     

An Interleaved-Trace Time-Compression Radar Display

Detection information from conventional surveillance radars is frequently presented in the form of a display known as the plan position indicator map. In this display, new data are displayed while data from previous scans fade from the display. Target blips typically persist for several scans, making possible operator integration or correlation. However, the noise from previous scans often masks signals from small moving targets. To avoid the loss in signal-to-noise ratio caused by the addition of noise to signal plus noise, a digital signal processing display unit has been designed and is presented here.     

Frequency-Agile Radar Signal Processing

Modern radars may incorporate pulse-to-pulse carrier frequency modulation to increase probability of detection, to reduce Vulnerability to jamming, and to reduce probability of interception. However, if coherent processing is used for clutter rejection, the frequency of N consecutive pulses must be held constant for N-pulse clutter cancellation or Doppler filtering. If M pulses are transmitted during the time the antenna illuminates a target, there are M/N coherently integrated echoes available for noncoherent integration in the computer or the operator's display to further improve the signal-to-noise ratio (SNR). In this paper, analytical and simulation methods are employed to determine the balance between coherent and noncoherent integration that yields the greatest SNR improvement. Attention is focused upon a model using peak selection of fast Fourier transform (FFT) Doppler channels and is compared to a reference model involving only a single Doppler channel. Curves of detectable SNR as a function of M and N are presented for both models.     

Book reviews

The general significance of streamers of the solar corona is discussed in the frame of our knowledge of the solar wind phenomenon and the large-scale solar magnetic structure. Thermodynamical and geometric parameters of streamers observed and measured at total solar eclipses are reviewed. Both the low part (in the form of a helmet with a cusp) and the external part (in the form of a stalk extended at many solar radii) are considered. The modelling of streamers starts with the analysis of effects produced by the solar wind flow on a magnetic structure. Facts and arguments are presented in favor of a model with a current sheet and reconnection processes going on along the axis of the streamer, especially in the non-collisional part of the radially extended streamer. Further development of the Pneuman and Kopp (1971) model is discussed, including difficulties occurring in the interpretation of a stationary solution. An empirical model satisfying observations is presented. Future researchs on streamers were discussed with emphasis on observations to be done with the space-borne coronagraphs on the SOHO spacecraft.