Optimal polarimetric detection of radar target in a slowlyfluctuating environment of clutter

It is shown that in a situation where a radar target is distant enough from the radar and is included in a natural or artificial clutter environment in such a manner that the conventional detection methods fail, it is possible to improve the radar detection performance by using appropriate signal processing on two orthogonal polarization states. A CFAR (constant false alarm rate) polarimetric detection system based on the study of the polarization difference between clutter and target is proposed. Since the polarization state of the clutter echoes fluctuates slowly from cell to cell, an autoregressive model can be applied to the components of the polarization vector to predict the detection thresholds needed to follow the polarization state variation. The detection thresholds are determined to maintain a false alarm probability equal to 10^-6. The presence of a target registers as a significant variation of the estimation error of the polarization vector. Results obtained from measurements of simple and canonical targets with artificial clutter are presented, and these results validate the principle of polarimetric detection     

Improved target classification using optimum polarimetric SARsignatures

We present a new method for automatic target/object classification by using the optimum polarimetric radar signatures of the targets/objects of interest. The state-of-the-art in radar target recognition is based mostly either on the use of single polarimetric pairs or on the four preset pairs of orthogonal polarimetric signatures. Due to these limitations, polarimetric radar processing has been fruitful only in the area of noise suppression and target detection. The use of target separability criteria for the optimal selection of radar signal state of polarizations is addressed here. The polarization scattering matrix is used for the derivation of target signatures at arbitrary transmit and receive polarization states (arbitrary polarization inclination angles and ellipticity angles). Then, an optimization criterion that minimizes the within-class distance and maximizes the between-class metrics is used for the derivation of optimum sets of polarimetric states. The results of the application of this approach on real synthetic aperture radar (SAR) data of military vehicles are obtained. The results show that noticeable improvements in target separability and consequently target classification can be achieved by the use of the optimum over nonoptimum signatures     

Studies of target detection algorithms that use polarimetric radardata

Algorithms are described which make use of polarimetric radar information in the detection and discrimination of targets in a ground clutter background. The optimal polarimetric detector (OPD) is derived. This algorithm processes the complete polarization scattering matrix (PSM) and provides the best possible detection performance from polarimetric radar data. Also derived is the best linear polarimetric detector, the polarimetric matched filter (PMF), and the structure of this detector is related to simple polarimetric target types. New polarimetric target and clutter models are described and used to predict the performance of the OPD and the PME. The performance of these algorithms is compared with that of simpler detectors that use only amplitude information to detect targets. The ability to discriminate between target types by exploring differences in polarimetric properties is discussed     

Adaptive polarimetric target detection with coherent radar. I.Detection against Gaussian background

The derivation of a completely adaptive polarimetric coherent scheme to detect a radar target against a Gaussian background is presented. A previously proposed Generalized Likelihood Ratio Test (GLRT) polarimetric detector is extended to the case of a general number of channels; this exploits the polarimetric characteristics of the received radar echoes to improve the detection performance. Together with the fully adaptive scheme, a model-based detector is derived that has a lower estimation loss. A complete theoretical expression is derived for the detection performance of both proposed polarimetric detectors. They are shown to have Constant False Alarm Rate (CFAR) when operating against Gaussian clutter, but to be sensitive to deviations from the Gaussian statistic. The application to recorded radar data demonstrates the performance improvement achievable in practice     

Adaptive polarimetric target detection with coherent radar. II.Detection against non-Gaussian background

For pt. I see ibid., vol. 37, no. 4, pp. 1194-1206 (2001).This paper presents the derivation of a polarimetric coherent adaptive scheme to detect a radar target against a non-Gaussian background. This completes the results presented in Part I for the Gaussian background. A Texture Free-Generalized Likelihood Ratio Test (TF-GLRT) detector is derived that exploits the polarimetric characteristics of the received radar echoes to improve the detection performance. The proposed polarimetric detector is shown to have Constant False Alarm Rate (CFAR) when operating against compound-Gaussian clutter with unknown parameters. Its performance is fully characterized by both theoretical analysis and simulation. Moreover, the application to recorded radar data demonstrates the performance improvement achievable in practice     

Emulating random process target statistics (using MSF)

The topics of matrix spectral factorization (MSF) in conjunction with results from realization theory are applied here in simulating a stationary multi-input/multi-output (MIMO) linear system from a specified power spectral density matrix. MSF provides the appropriate transfer function matrix and realization theory specifies the corresponding parameters of a linear system having this transfer function This approach can be used to correctly capture the cross correlations that exist in a multichannel vector random process (representing a particular radar target signature). Aspects of the solution to this problem are illustrated using an original representative example problem with a closed-form answer. Existing software programs for accomplishing MSF are identified and one has been successfully validated using the known closed-form solution mentioned above. A streamlined realization algorithm (offered here as the primary theoretical contribution) can be used along with the MSF computer program and can now be applied to actual radar data. Besides multichannel spectral estimation, several other important applications of this same MSF solution methodology are summarized in Appendix B including extending applicability to the complex case (to handle radar polarization issues related to coherent phase processing), and finally in reexpressing second order statistics of a multichannel autoregressive moving average (ARMA) process as those of a simpler but mathematically equivalent autoregressive (AR) process of slightly higher dimensions (as another original application of the same major result offered here)     

SPRI: simulator of polarimetric radar images

Simulator of polarimetric radar images (SPRI) consists of a suite of image processing programs for producing realistic millimeter-wave (MMW) radar images artificially on a workstation. The heart of the simulation approach is a polarimetric Rayleigh clutter simulator coupled to a clutter database. The simulator produces high resolution single-look polarimetric images. Hard targets can then be embedded into this clutter map, and the resultant image can be degraded in resolution, number of looks, polarization, etc. to match that which would be observed by a real sensor. Examples of simulated images, and comparisons of these simulations to actual images, are presented. The MMW Clutter Database is the most comprehensive to-date database of over 3500 Mueller matrices for many kinds of terrestrial clutter measured at 35 and 95 GHz, many of which are at incidence angles close to grazing. The database can be accessed via a World Wide Web flexible interface that enables data to be combined in new and unique ways specified by the user, and displayed in either tabular or graphical format. The structure and access procedure to the database are described     

Doppler measurements of smooth and rough surface high frequency scattering from spinning steel cylinders

Preliminary measurement results gathered using a fully coherent 77GHz phase coded pulse Doppler polarimetric radar and investigating the electromagnetic signatures of electrically large spinning steel cylinders are presented. New and novel results showing the Doppler contributions due to dynamic rough and smooth surface scattering effects are discussed and analysed. In the latter case, significant sideband conversion occurs together with a rapid fall off in the power density spectrum. Future work is proposed and discussed. A fuller analysis of these preliminary results and further results was presented.     

频率选择表面机载雷达天线的研究

研究了降低机载雷达天线散射截面的频率选择表面(FSS)极化扭转板。根据Floquet定理利用模式电压概念建立矢量模式,对二维周期阵列的频率选择表面进行理论分析和计算。设计并加工了一种降低机载雷达天线散射载面的频率选择表面极化扭转板结构。计算和实验表明:频率选择表面的极化扭转板在雷达天线工作通带内保持与原极化扭转板的性能不变,而在工作通带外具有降低雷达散射载面的效果。降低雷达散射截面7～10dB。     

Optimal speckle reduction in polarimetric SAR imagery

Speckle is a major cause of degradation in synthetic aperture radar (SAR) imagery. With the availability of fully polarimetric SAR data, it is possible to use the three complex elements (HH, HV, VV) of the polarimetric scattering matrix to reduce speckle. The optimal method for combining the elements of the scattering matrix to minimize image speckle is derived, and the solution is shown to be a polarimetric whitening filter (PWF). A simulation of spatially correlated, K-distributed, fully polarimetric clutter is then used to compare the PWF with other, suboptimal speckle-reduction methods. Target detection performance of the PWF, span, and single-channel |HH|² detectors is compared with that of the optimal polarimetric detector (OPD). A novel, constant-false-alarm-rate (CFAR) detector (the adaptive PWF) is as a simple alternative to the OPD for detecting targets in clutter. This algorithm estimates the polarization covariance of the clutter, uses the covariance to construct the minimum-speckle image, and then tests for the presence of a target. An exact theoretical analysis of the adaptive PWF is presented; the algorithm is shown to have detection performance comparable with that of the OPD     

Null phase-shift polarization filtering for high-frequency radar

In order to effectively cancel the interference in polarization filtering, the parameters of the polarization filter should timely adapt to the variation of the polarization of the interference, which may impact the amplitude and phase of the desired signal that passes through the same polarization filter during the coherent integration time (CIT) and render the enhancement of the signal integration a failure. To avoid this, a null phase-shift polarization (NPSP) filter is proposed, which is composed of a linear polarization transformer (LPVT), a conventional single-notch polarization (SNP) filter and an amplitude/phase compensation device (A/PCD). The interference, which has polarization different from those of the desired target signal, can be suppressed completely while the target signal remains without distortion. Some applications of high-frequency (HF) radars for suppressing the radio interference are introduced. Simulation results from the experimentally derived data indicate that the improvement of the signal-to-interference ratio (SIR) can be expected to be more than 28 dB. The proposed NPSP filter is effective in HF radar or other coherent systems.     

P-3 ultra-wideband SAR: description and examples

Under the Advanced Research Projects Agency (ARPA)/ASTO sponsorship, through a contract from the Naval Air Warfare Center (NAWC), the Environmental Research Institute of Michigan (ERIM) has developed an ultrawideband (UWB) very high frequency (VHF)/ultrahigh frequency (UHF) fully polarimetric airborne synthetic aperture radar (SAR) for studying the detection of foliage-obscured objects. The radar is installed in the NAWC P-3 testbed aircraft and takes advantage of existing ERIM-built multimode, fully-polarimetric X/L/C-band SAR hardware. This paper describes the radar and presents some examples of its capabilities including polarimetric imagery and two-pass interferometric surface height estimates     

Foliage penetration experiment

This series papers describes analyses of a foliage penetration experiment undertaken by MIT Lincoln Laboratory to assess the ability of synthetic aperture radar (SAR) to detect targets under trees. Data were taken using the NASA/JPL UHF, L-, C-band fully polarimetric SAR over a forested area in Maine in July 1990. Future experiments are planned to measure the polarimetric properties of clutter and targets using the latest ultrawideband sensors with submeter resolutions and fully polarimetric data collection capabilities     

Radar Partial Coherence Theory: An Introduction

The nature of physical phenomena is such that scattering from portions of an object, a number of objects, or clutter, is not completely unrelated; the underlying environment causes some degree of order in the phenomenon. Radar partial coherence theory describes a structure for the general target, or clutter, and its relationship to radar cross section, waveform coding, and the radar output signal. The clutter ambiguity function is introduced for extended bodies and embraces the (Woodward) ambiguity function for a point target. Due to nonlinear effects caused by partial coherence within the general target, radar signals and targets are formulated in terms of mutual coherence functions. The basic quantities describing the radar output are 1) the radar mutual coherence function (formulated in terms of the radar waveform) and 2) the target mutual coherence function which depends upon target properties, physical environment, and viewing aspect. Random noise (independent point scatterers) and partially coherent portions of reflecting bodies are made accountable in the theory. Partial coherence effects are treated as patches of reflected energy: self-coherent energy patches plus mutually coherent energy among the patches.     

Effects of polarization and resolution on SAR ATR

Lincoln Laboratory is investigating the detection and classification of stationary ground targets using high resolution, fully polarimetric, synthetic aperture radar (SAR) imagery. A study is summarized in which data collected by the Lincoln Laboratory 33 GHz SAR were used to perform a comprehensive comparison of automatic target recognition (ATR) performance for several polarization/resolution combinations. The Lincoln Laboratory baseline ATR algorithm suite was used, and was optimized for each polarization/resolution case. Both the HH polarization alone and the optimal combination of HH, HV, and VV were evaluated; the resolutions evaluated were 1 ft/spl times/1 ft and 1 m/spl times/1 m. The data set used for this study contained approximately 74 km/sup 2/ of clutter (56 km/sup 2/ of mixed clutter plus 18 km/sup 2/ of highly cultural clutter) and 136 tactical target images (divided equally between tanks and howitzers).     

分布式相参雷达辐射场分析

分布式相参雷达因一改传统大口径雷达机动性差、造价昂贵等缺陷,故受到了雷达界广泛关注,同时,它也是下一代雷达发展的方向.分析了分布式雷达相参发射的基本原理,得到了相参合成的条件,采用电磁软件仿真了分布式相参雷达辐射场的特性.通过仿真发现:短基线相参雷达的相参合成区域呈现条纹状,在主波束范围内场强同样呈现条纹状;长基线相参...     

Target prescreening based on a quadratic gamma discriminator

This work presents the development, analysis and validation of a new target discrimination module for synthetic aperture radar (SAR) imagery based on an extension of gamma functions to 2-D. Using the two parameter constant false-alarm rate (CFAR) stencil as a prototype, a new stencil based on 2-D gamma functions is used to estimate the intensity of the pixel under test and its surroundings. A quadratic discriminant function is created from these estimates, which is optimally adapted with least squares in a training set of representative clutter and target chips. This discriminator is called the quadratic gamma discriminator (QGD). The combination of the CFAR and the QGD was tested in realistic SAR environments and the results show a large improvement of the false alarm rate with respect to the two-parameter CFAR, both with high resolution (1 ft) fully polarimetric SAR and with one polarization, 1 m SAR data     

An approach to radiated testing of installed airborne Doppler radarwith weather/windshear detection capability

Numerous documents were reviewed to verify radar parameters needed to analyze and present the tester concept described herein. The weather and windshear models defined use the identical criteria established for the Doppler radar in terms of F-factor. The basic concept of the tester is to transmit coherent simulated radar returns in response to the airborne radar's transmission while mounted on a tripod in the far field of the radar when parked on the ramp. The varying amplitude of the received radar pulses are analyzed and put into memory as the tester antenna is illuminated by the scanning main beam and side lobes of the radar's antenna patterns. The tester controls the power of its outputted simulated radar returns in inverse relation to the power of the received radar pulses. These simulated radar returns, outputted into the main beam and/or side lobes of the scanning radar antenna, are interpreted by the radar system as received in the main lobe. The tester transmissions, incorporating microburst, storm and gust front models, previously defined, can thereby test the aircraft radar system performance in various hazard environments. The tester is designed to: verify operational performance of the radar; demonstrate installed radar performance; verify crew reports and minimize radar or LRU's removal for maintenance; test before and after a repair; and verify radome effects on radar performance     

Walker Model for Radar Sensing of Rigid Target Fields

The objective of this primarily tutorial item is to describe a general model for the observable data and the appropriate data processing involved in sensing rigid target fields with coherent radars. Any number of radars may be involved, and the scene and each radar may be in any kind of motion-with no restrictions on motion through resolution cells during the coherent processing time of the radars. The motions are assumed to be known. To some extent motion parameters can be estimated from the radar data, e.g., by adaptive parameter adjustments in the data processing; however, this subject is beyond the scope of this discussion. In large measure, the analysis in this item highlights the central conceptual result obtained by J.L. Walker as described in [1] -a major work in radar theory.