Studies of target detection algorithms that use polarimetric radardata

Algorithms are described which make use of polarimetric radar information in the detection and discrimination of targets in a ground clutter background. The optimal polarimetric detector (OPD) is derived. This algorithm processes the complete polarization scattering matrix (PSM) and provides the best possible detection performance from polarimetric radar data. Also derived is the best linear polarimetric detector, the polarimetric matched filter (PMF), and the structure of this detector is related to simple polarimetric target types. New polarimetric target and clutter models are described and used to predict the performance of the OPD and the PME. The performance of these algorithms is compared with that of simpler detectors that use only amplitude information to detect targets. The ability to discriminate between target types by exploring differences in polarimetric properties is discussed     

Threshold Control for Automatic Detection in Radar Systems

In automatic detection in radar systems an estimate of background clutter power is used to set the detection threshold. Usually detection cells surrounding the cell under test for the presence of a target are used to estimate the clutter power. In the research reported herein, the target location is taken to be uncertain and thus returns from a target could corrupt this clutter power estimate. It is shown how the threshold should be varied to compensate for the resulting degradation in detection performance. The threshold control procedure is based on a priori information about target location that could be supplied by the radar's tracking system. In addition, a simple procedure for calculating detection and false alarm probabilities for Swerling II target models is presented.     

Data quantization effects in CFAR signal detection

In this paper, we investigate data quantization effects in constant false alarm rate (CFAR) signal detection. Exponential distribution for the input data and uniform quantization are assumed for the CFAR detector analysis. Such assumptions are valid in the case of radar for a Swerling I target in Gaussian clutter plus noise and a receiver with analog square-law detection followed by analog-to-digital (A/D) conversion. False alarm and detection probabilities of the cell averaging (CA) and order statistic (OS) CFAR detectors operating on quantized observations are analytically determined. In homogeneous backgrounds with 15 dB clutter power fluctuations, we show analytically that a 12-bit uniform quantizer is sufficient to achieve false alarm rate invariance. Detector performance characteristics in nonhomogeneous backgrounds, due to regions of clutter power transitions and multiple interfering targets, are also presented and detailed comparisons are given     

Target prescreening based on a quadratic gamma discriminator

This work presents the development, analysis and validation of a new target discrimination module for synthetic aperture radar (SAR) imagery based on an extension of gamma functions to 2-D. Using the two parameter constant false-alarm rate (CFAR) stencil as a prototype, a new stencil based on 2-D gamma functions is used to estimate the intensity of the pixel under test and its surroundings. A quadratic discriminant function is created from these estimates, which is optimally adapted with least squares in a training set of representative clutter and target chips. This discriminator is called the quadratic gamma discriminator (QGD). The combination of the CFAR and the QGD was tested in realistic SAR environments and the results show a large improvement of the false alarm rate with respect to the two-parameter CFAR, both with high resolution (1 ft) fully polarimetric SAR and with one polarization, 1 m SAR data     

Moving target detection via airborne HRR phased array radar

We study moving target detection in the presence of temporally and spatially correlated ground clutter for airborne high range resolution (HRR) phased array radar. We divide the HRR range profiles into large range segments to avoid the range migration problems that occur in the HRR radar data. Since each range segment contains a sequence of HRR range bins, no information is lost due to the division and hence no loss of resolution occurs. We show how to use a vector autoregressive (VAR) filtering technique to suppress the ground clutter. Then a moving target detector based on a generalized likelihood ratio test (GLRT) detection strategy is derived. The detection threshold is determined according to the desired false alarm rate, which is made possible via an asymptotic statistical analysis. After the target Doppler frequency and spatial signature vectors are estimated from the VAR-filtered data as if a target were present, a simple detection variable is computed and compared with the detection threshold to render a decision on the presence of a target. Numerical results are provided to demonstrate the performance of the proposed moving target detection algorithm     

Improved target classification using optimum polarimetric SARsignatures

We present a new method for automatic target/object classification by using the optimum polarimetric radar signatures of the targets/objects of interest. The state-of-the-art in radar target recognition is based mostly either on the use of single polarimetric pairs or on the four preset pairs of orthogonal polarimetric signatures. Due to these limitations, polarimetric radar processing has been fruitful only in the area of noise suppression and target detection. The use of target separability criteria for the optimal selection of radar signal state of polarizations is addressed here. The polarization scattering matrix is used for the derivation of target signatures at arbitrary transmit and receive polarization states (arbitrary polarization inclination angles and ellipticity angles). Then, an optimization criterion that minimizes the within-class distance and maximizes the between-class metrics is used for the derivation of optimum sets of polarimetric states. The results of the application of this approach on real synthetic aperture radar (SAR) data of military vehicles are obtained. The results show that noticeable improvements in target separability and consequently target classification can be achieved by the use of the optimum over nonoptimum signatures     

A novel target detection approach based on adaptive radar waveform design

To resolve problems of complicated clutter, fast-varying scenes, and low signal-clutterratio (SCR) in application of target detection on sea for space-based radar (SBR), a target detection approach based on adaptive waveform design is proposed in this paper. Firstly, complicated sea clutter is modeled as compound Gaussian process, and a target is modeled as some scatterers with Gaussian reflectivity. Secondly, every dwell duration of radar is divided into several sub-dwells. Regular linear frequency modulated pulses are transmitted at Sub-dwell 1, and the received signal at this sub-dwell is used to estimate clutter covariance matrices and pre-detection. Estimated matrices are updated at every following sub-dwell by multiple particle filtering to cope with fast-varying clutter scenes of SBR. Furthermore, waveform of every following sub-dwell is designed adaptively according to mean square optimization technique. Finally, principal component analysis and generalized likelihood ratio test is used for mitigation of colored interference and property of constant false alarm rate, respectively. Simulation results show that, considering configuration of SBR and condition of complicated clutter, 9 dB is reduced for SCR which reliable detection requires by this target detection approach. Therefore, the work in this paper can markedly improve radar detection performance for weak targets.     

Low-altitude target detection by coastline operated marine radar

Relevant to a Richian family of fluctuating targets with a composite background of sea-plus-land clutter, the performance prediction of a radar operating in near-coastal regions is elucidated by assuming noncoherent integration of the pulses. Considering the dominance of land clutter, a modified K-distributed statistic is indicated for the overall clutter envelope; and the corresponding probability of false alarm and probability of detection are deduced for fixed threshold detection (s) based on N pulses integrated in the presence of the sea-plus-land clutter and the noise. Even when the target offers a dominant scattered echo, the worst situations of the land clutter affecting the detection performance are indicated     

基于杂波对消-自聚焦的多通道SAR-GMTI

对超高频(UHF)波段多通道合成孔径雷达(SAR)动目标检测技术进行研究,解决了长相干积累时间导致动目标在方位向散焦严重的问题。采用分块自聚焦技术对多通道SAR地面移动目标指示(GMTI)系统自适应杂波抑制后的SAR图像进行处理,改善杂波抑制后的SAR图像中动目标的聚焦情况,增强动目标与周围剩余杂波的对比度,进而提高恒虚警率(CFAR)检测的性能。与传统杂波抑制后直接进行CFAR检测方法相比较,该方法降低了检测虚警概率。实测数据处理结果显示动目标的信杂比明显提高,动目标方位向聚焦成功,证明了该方法的有效性。     

A state-of-the-art review in radar polarimetry and its applicationsin remote sensing

The authors assess the state of the art, focusing on their own contributions. Covered areas are the electromagnetic inverse problem in radar polarimetry, coherent polarization radar theory, partially coherent polarization radar theory, vector (polarization) inverse scattering approaches, the polarimetric matched filter approach, polarimetric Doppler radar applications in meteorology and oceanography, and image fidelity in microwave vector diffraction tomographic imaging     

非高斯杂波下自适应雷达目标检测新方法

在球不变随机向量(SIRV)非高斯杂波背景下,研究了多脉冲相参雷达目标的自适应检测问题。假设杂波具有相同的协方差矩阵结构和可能相关的纹理分量,提出了新的协方差矩阵估计器,并获得了相应的自适应归一化匹配滤波器(ANMF)。理论分析表明,在估计杂波分组大小与实际情况匹配时,所获得的ANMF对杂波功率水平和协方差矩阵结构均具有恒虚警率(CFAR)特性。仿真结果表明:当估计的杂波分组大小失配时,所获得的ANMF具有近似CFAR特性,并进一步分析了不同参数变化对所提检测器性能的影响。与已有的ANMF相比,所获得的ANMF具有更好的检测性能,且迭代次数更小,其相对于已知杂波协方差矩阵的最优归一化匹配滤波器(NMF)的检测损失也更小,具有很好的实际应用前景。     

一种机动多目标雷达视频信号模拟器的设计

给出了一种机动多目标雷达视频信号模拟器的软硬件设计方案,它可实时输出所需的多个动目标雷达视频信号,雷达信号的类型、目标的数量、目标的回波特性、目标的运动特性、杂波的类型及参数等均可方便地进行设置。该模拟器可满足各种雷达信号处理算法(如杂波抑制、恒虚警检测、动目标跟踪、多基地数据融合等)的测试与效果分析,以及对雷达信号处理机等进行性能调试与测试的需要。     

Analysis of an adaptive CFAR detector in non-Gaussian interference

Coherent signal detection in non-Gaussian interference is presently of interest in adaptive array applications. Conventional array detection algorithms inherently model the interference with a multivariate Gaussian random vector. However, non-Gaussian interference models are also under investigation for applications where the Gaussian assumption may not be appropriate. We analyze the performance of an adaptive array receiver for signal detection in interference modeled with a non-Gaussian distribution referred to as a spherically invariant random vector (SIRV). We first motivate this interference model with results from radar clutter measurements collected in the Mountain Top Program. Then we develop analytical expressions for the probability of false alarm and the probability of detection for the adaptive array receiver. Our analysis shows that the receiver has constant false alarm rate (CFAR) performance with respect to all the interference parameters. Some illustrative examples are included that compare the detection performance of this CFAR receiver with a receiver that has prior knowledge of the interference parameters     

Optimal radar threshold determination in Weibull clutter andGaussian noise

A technique is presented for determining the ideal detection threshold when Gaussian noise and Weibull distributed clutter returns are present on a radar receiver and neither is dominant. Quantitative data is presented for several clutter types and false alarm probabilities     

Adaptive polarimetric target detection with coherent radar. I.Detection against Gaussian background

The derivation of a completely adaptive polarimetric coherent scheme to detect a radar target against a Gaussian background is presented. A previously proposed Generalized Likelihood Ratio Test (GLRT) polarimetric detector is extended to the case of a general number of channels; this exploits the polarimetric characteristics of the received radar echoes to improve the detection performance. Together with the fully adaptive scheme, a model-based detector is derived that has a lower estimation loss. A complete theoretical expression is derived for the detection performance of both proposed polarimetric detectors. They are shown to have Constant False Alarm Rate (CFAR) when operating against Gaussian clutter, but to be sensitive to deviations from the Gaussian statistic. The application to recorded radar data demonstrates the performance improvement achievable in practice     

Measurements of L-band inland-water surface-clutter Doppler spectra

Although radar surface-clutter reflectivities from terrain are generally much greater than those from water, strong Bragg resonances at low but non-zero Doppler frequencies in backscatter from small inland bodies of water might potentially cause false alarms for moving target indicator (MTI) or other Doppler signal-processing techniques designed for target detection in ground clutter. To provide data for investigating this concern, measurements of L-band radar backscatter were recorded from the surface of a small inland freshwater reservoir in central Massachusetts. These measurements were of unusually high system stability and spectral purity so as to provide up to 80 dB of available spectral dynamic range. Strong Bragg spikes occurred in the clutter Doppler spectra from the reservoir at low (3 to 4 Hz) but non-zero Doppler frequencies. This strong Bragg resonance was persistent in time and space throughout the measurements. Spectral results are presented for all four combinations of linear polarization. Comparison with tree clutter spectral results indicates that, when an occasional water body comes under surveillance at vertical polarization in otherwise generally forested terrain, water clutter spectral density is expected to exceed surrounding-terrain tree clutter spectral densities in the Bragg-offset Doppler vicinity by large amounts     

Optimal polarimetric processing for enhanced target detection

The results of a study of several polarimetric target detection algorithms are summarized. The algorithms were tested using real target-in-clutter data collected by the Lincoln Laboratory 35 GHz synthetic aperture radar (SAR) sensor. Fully polarimetric measurements (HH, HV, VV) are processed into intensity imagery using adaptive and nonadaptive polarimetric whitening filters (PWFs). Then a two-parameter constant false alarm rate (CFAR) detector is run over the imagery to detect the targets. Nonadaptive PWF processed imagery is shown to provide better protection performance than either adaptive PWF processed imagery or single-polarimetric-channel HH imagery. In addition, nonadaptive PWF processed imagery is shown to be visually clearer than adaptive processed imagery     

Target detection trials with a millimeter wave radar system

Unobstructed, large RCS targets, similar radar targets surrounded by moving foliage, and small targets in severe clutter have been used as test cases for two pre-processing algorithms and several threshold levels in an experimental millimeter wave radar system. The rather conventional "six-out-of-eight" pulse radar selection method with binary output has been compared to an algorithm that accepts a target if the pre-defined trigger level is crossed by the average of the eight consecutive pulses. In this case, however, the output is an analog value corresponding to the relative average video amplitude. In terms of plotted video, this process seems to give a slightly better combination of false alarm rate and detection probability. Large targets are easier to detect from foliage clutter with the conventional method.     

Fluctuating Target Detection in Clutter Using Sidelobe Blanking Logic

In an earlier paper, Maisel [6] considered two-channel detection systems using a sidelobe blanking logic when a nonfluctuating target was present. This paper is an extension of the earlier work to include fluctuating targets. The Swerling I, II, III, and IV models are considered when single-pulse detection is of interest. An adaptive threshold procedure is also briefly discussed whereby the probability of false alarm at any given resolution cell is maintained constant, even though the input clutter level may vary from cell to cell or from beam position to beam position. Useful data are presented for detection probabilities in the range 0.5 to 0.9, for false alarm probabilities in the range 104 to 10-8, and for a false detection probability of 0.1 for a sidelobe target yielding an apparent signal to total noise power density ratio of 13.0 dB in the main beam receiver.