某雷达模拟器的目标与杂波信号模拟强度研究

建立了雷达模拟器中目标、地物杂波、海杂波、气象杂波的信号强度计算模型,根据相对运动关系解算出各目标与杂波信号的强度,并按时间流程存储在对应的数据表中,从而信号源将产生相应强度的信号注入雷达模拟台,以便后端雷达模拟台能在雷达威力覆盖范围内准确地显示出目标与杂波强度变化。通过仿真软件在雷达训练模拟器中的功能测试,实现了目标与杂波仿真效果,满足了雷达模拟训练的要求。     

机载MIMO雷达空时自适应杂波对消器

针对机载多输入多输出(MIMO)雷达杂波分布呈现空时耦合特性,提出一种空时自适应杂波对消器.利用机载MIMO雷达的脉冲回波数据,构造杂波对消器的系数矩阵.通过空时自适应杂波对消器的预处理,可以有效地抑制杂波,并通过与常规空时处理算法的级联,最终可以有效提高动目标的检测性能.实现了由传统地基雷达杂波对消器向机载运动平台的推广.仿真结果表明,这种自适应杂波对消器不仅适用于正侧视雷达,对于非正侧视雷达也同样适用.     

海杂波FRFT域分形特征在动目标检测中的应用

文中研究了海上动目标雷达回波与海杂波在分数阶Fourier域(FRFT域)的分形特性,利用两者幅值起伏程度的不同,提出了一种基于FRFT域分形维数差异的动目标检测方法。该方法以处处连续而不可导的非平稳不规则信号模型——分数布朗运动作为FRFT域分形模型,通过仿真分析实测海杂波数据的分形曲线,证明海杂波在FRFT域的无标度区间内具有分形特性。提取出FRFT域海杂波与动目标回波的分形维数,并利用其固有的差异进行目标检测。经不同极化方式下海杂波数据仿真,验证了算法的有效性。     

一种中频雷达模拟器的设计

设计出了一种中频雷达模拟器的硬件,阐述了该模拟器总体组成和工作过程,以及各部分的组成和工作原理。该模拟器可以产生单脉冲体制下的一组固定目标的和、差模拟中频回波信号和动目标和、差模拟中频回波信号;可以在联机或独立2种工作状态下,产生常规脉冲、线性调频脉冲等多种雷达中频回波。该模拟器适用于相控阵雷达等多种新体制跟踪雷达的调试和训练。     

冲击杂波下的MIMO雷达DOA估计方法

研究了对称α稳定分布(SαS)冲击杂波下的多输入多输出（MIMO）雷达目标波达方向（DOA）估计问题,分别提出基于分数低阶最小方差无畸变响应(FrMVDR)的MIMO雷达DOA估计算法和无穷范数归一化最小方差无畸变响应（Inf-MVDR)算法。FrMVDR算法,首先进行冲击杂波特征指数的估计,然后使MIMO雷达接收阵列的分数低阶输出功率最小,实现MIMO雷达的DOA估计。为了避免FrMVDR算法对杂波特征指数估计,提出Inf-MVDR算法,首先用无穷范数对接收信号进行归一化处理,使归一化后的阵列输出功率有界,继而采用传统MVDR算法进行DOA估计。计算机仿真验证了上述两种算法的有效性;同时仿真结果还表明在冲击杂波下,MIMO雷达的空间分集特性可显著提高DOA估计的精度。     

一种新型相控阵雷达多目标模拟器设计

针对某型相控阵雷达目标模拟器采用单目标技术,无法真实模拟跟踪多目标回波信号的问题,设计了一种新型多目标模拟器。该模拟器采用DDS(Direct Digital Synthesis,直接数字频综)信号产生、数字信号存储及控制等技术,结合航迹数据产生与控制软件,实现多目标回波信号模拟的同时,实现并完善了模拟器的多目标引导数据注入、理论弹道演练和实测数据回放等模拟和训练功能。软件部分,在考虑目标回波特性的基础上,利用施威林Ⅰ型模型产生目标回波,实现目标回波的模拟仿真工作。在硬件上设计了以FPGA(Field Programmable Gate Array,现场可编程门阵列)为核心的功能模块,将模拟仿真信号实时生成目标回波。实际应用表明,该模拟器控制简单,运行稳定,精度高,完全满足跟踪测量和模拟训练需求。     

一种基于FPGA的海杂波产生器设计

海杂波是反舰导弹末制导雷达回波的主要背景噪声,在末制导雷达模拟器的设计中,海杂波产生器是一个重要组成部分。在研究海杂波噪声概率分布密度的基础上,给出了一种基于FPGA技术的海杂波产生器的设计方案,并利用Altera公司的cyclone II系列芯片和QuartusII开发软件对设计进行了仿真验证。采用FPGA技术可以方便地对设计方案、海杂波的分布形式、数据量大小进行修改。仿真结果表明,该设计能够产生符合要求的海杂波信号,并且具有结构简单、集成度高、易于修改等特点。     

PD雷达目标模拟器的实现

在地面进行PD雷达测试时,需要提供一个PD雷达目标模拟器,针对该需求,提出了该体制雷达目标模拟器的设计方案和实现方法,解决了雷达测试中模拟源的需求问题。     

火箭橇速度测试雷达合作目标设计

为提高测速雷达对长距离火箭橇全程速度测试作用距离, 从增大目标雷达 截面积的角度提出了无源角反射器与有源雷达目标模拟器两种橇载雷达合作目标设计思 路,重点阐述了有源雷达目标模拟器设计方案,明确了有源雷达目标模拟器设计中需解 决的关键技术。文中设计的雷达合作目标能够满足靶场长距离火箭橇试验全程速度测试 要求,具有较高的实际使用价值。     

相控阵雷达多目标模拟器技术研究

提出了一种可动态检验相控阵雷达系统性能的多目标模拟器技术。介绍了多目标模拟器的工作原理、功能组成和系统模型，分析了模拟器应用于相控阵雷达性能和精度检查的可行性。     

Environment and Radar Operation Simulator

The environment and radar operation simulator (EROS) is a hardware system whose function is to produce realistic synthetic radar backscatter, incorporating both target and clutter. The simulator is electrically connected to a subject radar and responds in real time to the radar's antenna scan angle by producing the correct composite video signal.     

HRR Detector for Slow-Moving Targets in Sea Clutter

The radar detection of targets in the presence of sea clutter has historically relied upon the radial velocity of targets with respect to the radar platform either by exploiting the relative target Dopplers (for targets with sufficient radial velocity) or by discerning the paths targets traverse from scan to scan. For targets with little to no radial velocity component, though, it can become quite difficult to differentiate targets from the surrounding sea clutter. This paper addresses the detection of slow-moving targets in sea clutter using a high resolution radar (HRR) such that the target has perceptible extent in range. Under the assumption of completely random sea clutter spikes based on an epsiv-contaminated mixture model with the signal and clutter powers known, optimal detection performance results from using the likelihood ratio test (LRT). However, for realistic sea clutter, the clutter spikes tend to be a localized phenomenon. Based upon observations from real radar data measurements, a heuristic approach exploiting a salient aspect of the idealized LRT is developed which is shown to perform well when applied to real measured sea clutter.     

基于嵌入式仿真的雷达训练系统设计

介绍了嵌入式仿真技术及其发展,将嵌入式仿真与雷达模拟训练相结合,构成了能够嵌入到机械扫描雷达实装的模拟训练系统。描述了对嵌入式仿真训练系统的结构组成以及部分模块的功能,研究了模拟雷达视频回波数据的方法和模型,包括目标回波、地物杂波、海杂波、气象杂波、有源干扰和接收机内部噪声,利用数学模型计算回波的强度、方位、距离等特性,调制实际录取的回波数据,生成与态势设置参数相应的模拟回波数据,能够对信号处理操作和抗干扰操作做出响应。通过对视频回波进行仿真,由终端显示画面可知模拟的回波数据具有较高的逼真度,经测试模拟视频回波能够被雷达显控终端识别。     

一种超宽带雷达信号模拟器的设计

为满足雷达装备不断增长的保障需求,研制了一套便携式雷达装备检测系统,该检测系统的核心组成部分是超宽带雷达信号模拟器。模拟器采用低频段基带信号与高频段本振信号2次混频来模拟产生0.05~16 GHz范围内多种体制的雷达信号,最后完成了电路实现,经过信号测试各项指标均达到设计要求。     

Target detection trials with a millimeter wave radar system

Unobstructed, large RCS targets, similar radar targets surrounded by moving foliage, and small targets in severe clutter have been used as test cases for two pre-processing algorithms and several threshold levels in an experimental millimeter wave radar system. The rather conventional "six-out-of-eight" pulse radar selection method with binary output has been compared to an algorithm that accepts a target if the pre-defined trigger level is crossed by the average of the eight consecutive pulses. In this case, however, the output is an analog value corresponding to the relative average video amplitude. In terms of plotted video, this process seems to give a slightly better combination of false alarm rate and detection probability. Large targets are easier to detect from foliage clutter with the conventional method.     

Multiple moving target feature extraction for airborne HRR radar

This study considers the clutter suppression and feature extraction of multiple moving targets for airborne high range resolution (HRR) phased array radar. To avoid the range migration problems that occur in the HRR radar data, we divide each HRR profile into nonoverlapping low range resolution segments. No information is lost due to the division and hence no loss of resolution occurs. We show how to use a vector auto-regressive filtering technique to suppress the clutter. Then a relaxation-based parameter estimation algorithm is presented for multiple moving target feature extraction. Numerical results are given to demonstrate the effectiveness of the algorithm     

Low-cost technology for multimode radar

A flexible test bed radar architecture is described which includes an integrated RF electronics package that can support multiple radar applications, including surveillance, fire control, target acquisition, and tracking. This type of architecture can significantly reduce the cost, power, size, and weight of electronics on future weapon delivery platforms. The Army Research Laboratory (ARL) is developing technology to support multimode radar requirements. These requirements include the detection and location of moving or stationary low radar cross section targets in heavy ground clutter and the classification and/or recognition of these targets. We address these requirements with commercial-off-the-shelf (COTS) products and the integration of several enabling technologies. The test bed radar includes a direct digital synthesizer (DDS) for frequency-diverse waveform generation, a flexible wideband transceiver for bandwidth extension and frequency translation, and an open architecture signal processor with embedded wideband analog-to-digital converters for real-time acquisition and processing. Efficient signal processing algorithms have been developed to demonstrate multimode radar capability. This paper discusses the various subassemblies, algorithm efficiency, and field experiment results     

Optimal polarimetric detection of radar target in a slowlyfluctuating environment of clutter

It is shown that in a situation where a radar target is distant enough from the radar and is included in a natural or artificial clutter environment in such a manner that the conventional detection methods fail, it is possible to improve the radar detection performance by using appropriate signal processing on two orthogonal polarization states. A CFAR (constant false alarm rate) polarimetric detection system based on the study of the polarization difference between clutter and target is proposed. Since the polarization state of the clutter echoes fluctuates slowly from cell to cell, an autoregressive model can be applied to the components of the polarization vector to predict the detection thresholds needed to follow the polarization state variation. The detection thresholds are determined to maintain a false alarm probability equal to 10^-6. The presence of a target registers as a significant variation of the estimation error of the polarization vector. Results obtained from measurements of simple and canonical targets with artificial clutter are presented, and these results validate the principle of polarimetric detection