Satellite mobile communications spread-spectrum receiver

Since 1999, ESA has conducted a number of system studies and technological developments to support the European and Canadian industry in the definition of a Satellite UMTS (S-UMTS) component development strategy, identifying critical technological areas and promoting S-UMTS demonstrations. In particular, the MUSIC project has successfully demonstrated advanced digital signal processing techniques to mitigate CDMA interference in spread-spectrum receivers, thus increasing the capacity and/or quality of service of a wireless communication network. The low-complexity solution for interference mitigation investigated and developed in the project is particularly suited for being implemented in mobile terminals.     

Covariance matrix estimation for adaptive CFAR detection incompound-Gaussian clutter

We address the estimation of the structure of the covariance matrix and its application to adaptive radar detection of coherent pulse trains in clutter-dominated disturbance modeled as a compound-Gaussian process. For estimation purposes we resort to range cells in spatial proximity with that under test and assume that these cells, free of signal components, can be clustered into groups of data with one and the same value of the texture. We prove that, plugging the proposed estimator of the structure of the covariance matrix into a previously derived detector, based upon the generalized likelihood ratio test (GLRT), leads to an adaptive detector which ensures the constant false alarm rate (CFAR) property with respect to the clutter covariance matrix as well as the statistics of the texture. Finally, we show that this adaptive receiver has an acceptable loss with respect to its nonadaptive counterpart in cases of relevant interest for radar applications     

Two years of INTEGRAL observation of the BHC IGR J17464-3213

On March 2003, IBIS, the γ-ray imager on board the INTEGRAL satellite, detected an outburst from a new source, IGR J17464-3213, that turned out to be an HEAO-1 transient, namely H1743-322. The spectral and temporal evolutions of the source were observed by INTEGRAL in different periods. Also RXTE observed the source for the first time on 2003 March 29 during a PCA Galactic bulge scan. The source flux decayed below the RXTE PCA sensitivity limit in November 2003, then in April 2004 it was again detected by INTEGRAL. On July 3, 2004 the source was again detected by RXTE/PCA at a 2–10 keV intensity of 16 mCrab and on July 7, reached 69 mCrab. Recently, a new outburst was observed on August 2005. We briefly summarise here the behaviour of the source observed by INTEGRAL from March 2003 to August 2005. The new outbursts of the source and the analysis of all the data collected (now public) give a global view of the spectral and time behaviour of this X-ray transient.     

传输/反射法测量复介电常数的三个方程研究

介绍了利用传输／反射参数测量复介电常数的三个方程。利用奇偶模方法分析传输线与二端口网络，得到传播常数与归一化特性阻抗的解析解。进而得到确定复介电常数的三个方程。利用这些方程仅用一次测量解决已有传输／反射法中存在的低损耗材料的厚度谐振问题、多值性问题及其它问题。讨论了利用这三个方程通过一次测量解决上述问题的方法并分析了这些方程的测量不确定度。最后给出了实验结果。     

空间站大型伸展机构的运动稳定性分析

从空间站大型伸展机构的运动特点和系统动力学方程出发，着重分析了该系统的稳定性判据。这一问题又可分为五个方面：姿态-伸展-振动耦合系统的分析方法，复杂大系统的分解集结方法，时滞系统和滞后系统的稳定性问题，Stick-Ship运动对系统对系统稳定性的影响，非线性非定常系数稳定性的一般解。其中还对接触、摩擦、碰撞问题，变拓扑系统，非光滑动力学系统等进行了专门的研究，分析了Lyapunov指数方法在这些特殊系统中的适应性。本文对空间站大型伸展机构的稳定性问题进行了较全面的分析，指出了目前在处理这类复杂大系统时存在的一些难点问题，为其设计和研制工作提出了理论基础。     

发汗冷却喷管在火箭发动机上的应用

较系统地介绍了发汗冷却的机理和发汗冷却研究的发展历程，说明了发汗喷管不同研究阶段的典型结构，并重点阐述了可望很快应用于工程上的发汗喷管结构，同时列出了发汗喷管计算中关键技术－热量交换的有关数学模型和各参数的取值。指出了近期需要开展的工作。     

The Brazilian scientific microsatellite SACI-1

The National Space Research Institute (INPE) is developing the first Brazilian Scientific Microsatellite (SACI-1) based on the vanguard technology and on the experience acquired through projects developed by Brazilian Space Program. The SACI-1 is a 750km polar orbit satellite. The spacecraft will combine spin stabilization with geomagnetic control and has a total mass of 60 kg. The overall dimensions are 640×470×470 mm. The SACI-1 satellite shall be launched together with CBERS (China-Brazil Earth Resource Satellite). Its platform is being designed for multiple mission applications. The Brazilian Academy of Sciences has selected four scientific payloads that characterize the mission. The scientific experiments are: ORCAS (Solar and Anomalous Cosmic Rays Observation in the Magnetosphere), PLASMEX (Study of Plasma Bubbles), FOTSAT (Airglow Photometer), and MAGNEX (Geomagnetic Experiment).     

Models of P/Borrelly: Activity and dust mantle formation

Comet 19P/Borrelly was observed by Deep Space One spacecraft on September 22, 2001 (Soderblom et al., 2002).The DS1 images show a very dark and elongate nucleus with a complex topography; the IR spectra show a strong red-ward slope consistent with a very hot and dry surface (345K to 300K). During DS1 encounter the comet coma was dominated by a prominent jet but most of the comet was inactive, confirming the Earth-based observations that <10% of the surface is actively sublimating. We have developed a thermal evolution model of comet PBorrelly, using a numerical code that is able to solve the heat conduction and gas diffusion equations at the same time across an idealized spherical nucleus ( De Sanctis et al., 1999, 2000; Capria et al., 2000; Coradini et al., 1997a,b). The comet nucleus is composed by water, volatiles ices and dust in different proportions. The refractory component is made by grains that are embedded in the icy matrix. The code is able to account for the dust release, contributing to the dust flux, and the formation of dust mantles on the comet surface. The model was applied to a cometary nucleus with the estimated physical and dynamical characteristics of P/Borrelly in order to infer the status and activity level of a body on such an orbit during the DS1 observation. The comet gas flux, differentiation and thermal behavior were simulated and reproduced. The model results are in good agreement with the DS1 flyby results and the ground based observations, in terms of activity, dust coverage and temperatures of the surface.     

Surface tension-driven flows in horizontal liquid metal layers

The problem of surface tension-driven flows in horizontal liquid layers has been studied experimentally, and theoretically by direct numerical simulation and small perturbation analysis. We focus our attention on situations in which the depth of the fluid (liquid tin; small Prandtl number, Pr=0.015) is small enough to ensure the predominance of the surface tension forces over those due to the buoyancy. The surface velocity has been experimentally obtained for liquid tin layer with various aspect ratio (length to height) in the range 5<A<83. The thermal gradients are ranged from 5 to 40°K/cm. In the numerical study, the Navier-Stokes and energy equations are solved by an efficient finite difference technique. The parameters governing the flow behaviour in the liquid are varied to determine their effects on thermocapillary convection: the Reynolds number 10<Re<210⁴ and the aspect ratio 2<A<25; with Pr kept constant at Pr=0.015. The linear eigenequation resulting from small spatial disturbances of the Couette flow solution is solved using an Tau-Chebyshev approximation. A notable feature of the theoretical study is the totally different end circulations. In the region near the cold wall a multicell structure is evident. This agrees with the eigensolution which is of complex type, indicating spatial periodicity. In the hot wall region the flow is accelerated to reach the velocity value for the fully-developed Couette flow which is reached under conditions such as Re/A<20. The transition from viscous to boundary layer regime occurs for a critical value (Re/A)_c of nearly about 200, as deduced from the numerical and experimental results.