弹载合成孔径雷达自适应重频分析与设计

弹载合成孔径雷达(Synthetic Aperture Radar,SAR)的目标距离、视线角由于高速逼近目标而快速变化,这导致传统的固定脉冲重复频率(Pulse Repetition Frequency,PRF)(简称重频)波形难以兼顾弹载SAR雷达在成像各方面的约束条件,故需要根据当前弹体运动和弹目关系变化情况实时计算重频。详细分析了影响重频选择的各项因素,包括避免距离模糊、方位模糊、高度杂波、发射遮挡影响及SAR成像分辨率、系统相参性要求等影响因素,并设计了自适应重频计算的工作流程。某SAR雷达系统实验表明,该设计能够在实际飞行弹道条件下根据实际弹目关系自适应调整脉冲重复频率,从而更好地实现SAR雷达系统的工作性能,有效解决了固定重频波形不能适应弹载SAR工作条件的难题。     

Some High-Velocity Clutter Effects in Matched and Mismatched Receivers

A generalized ambiguity function including the effects of Doppler dispersion is defined as the time cross correlation of the complex envelopes of two signals, both derived from the same basic waveform but with different delays and Doppler effects. The Doppler effects include the frequency shift and expansion or contraction of the modulation time scale. This expansion or contraction is the Doppler dispersion. While the general ambiguity function cannot be expressed directly in terms of the Woodward or undispersed ambiguity function, its squared magnitude can be expressed in terms of the Woodward ambiguity function. The relation is not simple, being an integral form. Nevertheless, since the Woodward ambiguity function is known for many signals, the relation may simplify the determination of the squared magnitude of the general ambiguity function. We consider the clutter output of a matched filter or correlation receiver where the receiver is matched to a waveform having a specific delay and specific time compression. The variance of the clutter output is the two-dimensional convolution of the clutter ``scattering function' with the squared magnitude of the general ambiguity function. This is a generalization of an earlier result which is formally the same but using the Woodward ambiguity function. This last result is generalized for a mismatched receiver. In such a case, the variance of the clutter output is the double convolution of the clutter scattering function with the cross ambiguity function of the transmitted waveform, modified by the average velocity of the clutter, and the receiver reference waveform.     

Doppler ambiguity resolution using multiple PRF

An algorithm for velocity ambiguity resolution in coherent pulsed Doppler radar using multiple pulse repetition frequencies (PRF) is presented. It relies on the choice of particular values for the PRFs. The folded frequency of the target signal is obtained by averaging the folded frequency estimates for each PRF, and a quasi maximum likelihood criterion is maximized for ambiguity order estimation. The fast implementation of this nonambiguous estimation procedure is based on the fast Fourier transform (FFT), The proposed waveform allows full exploitation of any (even) number of PRFs, which appears to be important for estimation improvement. The effects of the waveform parameters and the folded frequency estimation variance on the performance of the ambiguity order estimation procedure are evaluated theoretically and through computer simulations. Mean square error (MSE) curves are given to assess the Doppler frequency estimation accuracy. Finally, the new method is compared with a classical technique and the implementation of the algorithm in a clutter environment is addressed.     

Receiver operating characteristics for the coherent UWB randomnoise radar

An ultrawideband (UWB) random-noise radar operating in the 1-2 GHz frequency band has been developed and held-tested at a 200 m range at the University of Nebraska. A unique heterodyne correlation technique based on a delayed transmitted waveform using a photonic delay line has been used to inject coherence within this system. The performance of this radar, assuming a point target, has been investigated from a statistical point of view by developing the theoretical basis for the system's receiver operating characteristics (ROC). Explicit analytical expressions for the joint probability density function (pdf) of the in-phase (I) and quadrature (Q) components of the receiver output have been derived under the assumption that the input signals are partially correlated Gaussian processes. The pdf and the complementary cumulative distribution function (cdf) for the envelope of the receiver output are also derived. These expressions are used to relate the probability of detection (P_d) to the probability of false alarm (P_f ) for different numbers of integrated samples, and the results are analyzed     

Multipath and ground clutter analysis for a UWB noise radar

An ultrawideband (UWB) random-noise radar operating in the 1-2 GHz frequency band has been developed and field-tested up to a 200 m range at the Environmental Remote Sensing Laboratory (ERSL) of the University of Nebraska. A unique heterodyne correlation technique based on a delayed transmitted waveform using a photonic delay line has been used to inject coherence within this system. The performance of this radar in the presence of ground reflections is investigated analytically and experimentally, and the mitigating effects of UWB waveform on multipath-induced interference are analyzed. In addition, the ground clutter statistics, in a look-down mode, are theoretically established and experimentally verified. The performance of this radar in detecting clutter embedded targets with small radar cross section (RCS) is also experimentally examined.     

High Power Radar Implementation of Coherent Waveforms

The radar use of coherent burst waveforms to obtain clutter suppression is summarized and problems arising from the high power implementation of such waveforms are discussed. These problems arise from the nonlinear nature of the typical high power radar transmitter and result in loss of subpulse-to-subpulse amplitude and phase accuracies, causing clutter suppression degradation. adaptive control loop used to measure transmission errors and provide continuous updating to minimize such errors is proposed. Residual transmission errors resulting via use of the control loop are calculated and shown to have an insignificant effect upon the clutter suppression properties of the coherent waveform. Experimental verification of control loop performance is presented.     

Slope Coding of Coherent Pulse-Burst Waveforms

Useful new properties are obtained with a coherent pulse-burst waveform if the FM slopes are allowed to change from pulse to pulse. A design feature using such a "slope-coded" waveform is the ability to transfer, in a controllable manner, ambiguity volume from the range ambiguity peaks to regions located between the peaks (in the frequency direction). Slope coding thus provides a useful mechanism for matching the waveform to the environment; i. e., it permits the signal designer to make some compromise between range ambiguity-peak heights and low-velocity clutter rejection.     

Radar/Sonar Signal Design for Bounded Doppler Shifts

In many detection and estimation problems, Doppler frequency shifts are bounded. For clutter or multipath that is uniformly distributed in range and symmetrically distributed in Doppler shift relative to the signal, detectability of a point target or a communication signal is improved by minimizing the weighted volume of the magnitude-squared autoambiguity function. When clutter Doppler shifts are bounded, this volume is in a strip containing the range axis on the range-Doppler plane. For scattering function estimation, e.g., for weather radar, Doppler flow meters, and distributed target classifiers, it is again relevant to minimize ambiguity volume in a strip. Strip volume is minimized by using a pulse train, but such a signal has unacceptably large range sidelobes for most applications. Other waveforms that have relatively small sidelobe level within a strip on the range-Doppler plane, as well as small ambiguity volume in the strip, are obtained. The waveforms are composed of pulse pairs that are phase modulated with Golay complementary codes.     

A Multistage Processing Algorithm for Disturbance Removal and Target Detection in Passive Bistatic Radar

The paper examines the problem of cancellation of direct signal, multipath and clutter echoes in passive bistatic radar (PBR). This problem is exacerbated as the transmitted waveform is not under control of the radar designer and the sidelobes of the ambiguity function can mask targets including those displaced in either (or both) range and Doppler from the disturbance. A novel multistage approach is developed for disturbance cancellation and target detection based on projections of the received signal in a subspace orthogonal to both the disturbance and previously detected targets. The resulting algorithm is shown to be effective against typical simulated scenarios with a limited number of stages, and a version with computational savings is also introduced. Finally its effectiveness is demonstrated with the application to real data acquired with an experimental VHF PBR system.     

A novel target detection approach based on adaptive radar waveform design

To resolve problems of complicated clutter, fast-varying scenes, and low signal-clutterratio (SCR) in application of target detection on sea for space-based radar (SBR), a target detection approach based on adaptive waveform design is proposed in this paper. Firstly, complicated sea clutter is modeled as compound Gaussian process, and a target is modeled as some scatterers with Gaussian reflectivity. Secondly, every dwell duration of radar is divided into several sub-dwells. Regular linear frequency modulated pulses are transmitted at Sub-dwell 1, and the received signal at this sub-dwell is used to estimate clutter covariance matrices and pre-detection. Estimated matrices are updated at every following sub-dwell by multiple particle filtering to cope with fast-varying clutter scenes of SBR. Furthermore, waveform of every following sub-dwell is designed adaptively according to mean square optimization technique. Finally, principal component analysis and generalized likelihood ratio test is used for mitigation of colored interference and property of constant false alarm rate, respectively. Simulation results show that, considering configuration of SBR and condition of complicated clutter, 9 dB is reduced for SCR which reliable detection requires by this target detection approach. Therefore, the work in this paper can markedly improve radar detection performance for weak targets.     

Time-frequency method for detecting an accelerating target in sea clutter

The authors design a time-frequency (TF) method for use in high-frequency surface-wave radar (HFSWR) for detecting a small accelerating target in sea clutter. The clutter is modelled by pseudo targets moving with Bragg velocity towards and away from the radar. The design is based on the Wigner distribution (WD) defined by Chan (type-III WD, in our terminology) rather than the WD defined by Claasen and Mecklenbrauker (1980) (2times type-I WD, in our terminology). Like the type-I WD, the type-III WD also concentrates a chirp signal onto a straight line in the TF plane. The type-III WD has the following advantages: 1) Its range of unambiguously measurable frequencies (RUMF) is [-pi,pi] rad/s, whereas for the type-I WD the RUMF is [-pi/2,pi/2] rad/s. 2) It allows a target separated from the clutter by pi rad/s to be detected, whereas the type-I WD coalesces such a target with the clutter and thereby mask it. An ambiguity function (AF) was defined corresponding to the type-III WD and use it to derive a smoothed type-III WD that mitigates the clutter. The smoothed type-III WD method is applied to real radar data and shown to be superior to the conventional Fourier transform method. The advantages of the type-III WD over the type-I WD are also demonstrated. The design principles laid out in the paper can also be used to develop a TF method for use in air traffic control radar (ATCR) for detecting an accelerating target in land clutter     

Reduced-rank STAP for high PRF radar

Due to the range ambiguity of high pulse-repetition frequency (HPRF) radars, echoes from far-range fold over near-range returns. This effect may cause low Doppler targets to compete with near-range strong clutter. Another consequence of the range ambiguity is that the sample support for estimating the array covariance matrix is reduced, leading to degraded performance. It is shown that space-time adaptive processing (STAP) techniques are required to reject the clutter in HPRF radar. Four STAP methods are studied in the context of the HPRF radar problem: low rank approximation sample matrix inversion (SMI), diagonally loaded SMI, eigencanceler, and element-space post-Doppler. These three methods are evaluated in typical HPRF radar scenarios and for various training conditions, including when the target is present in the training data     

Detection of chi-square fluctuating targets in arbitrary clutter

In a recent paper, general expressions were derived for the density and cumulative probability functions of the amplitude of a linear matched-filter output given a nonfluctuating target in a clutter-limited environment. These expressions were based on the clutter amplitude density function. The results are extended to calculate the cumulative probability function of the output of a linear matched filter used to detect a chi-square fluctuating target in a clutter-limited environment. The resulting method is applied to a common radar clutter model, and experimental sonar data.     

MTI Optimization in a Multiple-Clutter Environment

A means of optimizing a moving target indicator (MTI) filter for rejecting several types of clutter, which are generated by different mechanisms such as by rain or the ground, is formulated. lt is found that the optimal performance of such a filter depends on the spectral density functions, average radar cross sections, and the relative mean Doppler frequencies of each type of clutter. lt is shown that the optimal improvement factor of such a filter is bounded by the weighted average (weighted in accordance with the radar cross sections of the clutter types) of the improvement factor for the individual clutter type. lt is also shown that the improvement factor of such a filter is a function of the relative mean Doppler frequency f0 between the clutter types. As f0 increases, the performance of the MTI system degrades. The worst improvement factor occurs when f0 is equal to half of the radar pulse-repetition frequency (PRF).     

机载MIMO雷达空时自适应杂波对消器

针对机载多输入多输出(MIMO)雷达杂波分布呈现空时耦合特性,提出一种空时自适应杂波对消器.利用机载MIMO雷达的脉冲回波数据,构造杂波对消器的系数矩阵.通过空时自适应杂波对消器的预处理,可以有效地抑制杂波,并通过与常规空时处理算法的级联,最终可以有效提高动目标的检测性能.实现了由传统地基雷达杂波对消器向机载运动平台的推广.仿真结果表明,这种自适应杂波对消器不仅适用于正侧视雷达,对于非正侧视雷达也同样适用.     

Analog clutter cancellation algorithms for dynamic range reduction

A technique that effectively reduces the dynamic range of the input signal in a radar receiver prior to digitization is presented. The dynamic range reduction is accomplished through a process that predicts the next radar return signal from the previous return signals, generates a replica waveform, and subtracts this replica waveform from the radar return signal prior to digitization. This process allows the radar return signal to be digitized without distortion by an analog-to-digital converter (ADC) having a limited dynamic range. The full dynamic range of the radar return signal is then restored by adding the replica waveform to the ADC output. Test and evaluation results using both synthetic and recorded radar data demonstrate in excess of a 30-dB reduction in the dynamic range of the signal at the ADC input when strong clutter is present     

Clutter Suppression Properties of Weighted Pulse Trains

A common but troublesome requirement on radar sensors is the detection of a target in the interference from undesired scatterers, or clutter. Systems with coherent processing of pulse trains are uniquely suited for the purpose because, with pulse trains, it is possible to concentrate the receiver output for particular values of Doppler and thus suppress the clutter by Doppler filtering. This paper discusses to what degree the effectiveness of the method can be enhanced by tapering, or weighting, of the pulse amplitudes. The general results are illustrated by computer-plotted response functions for weighted pulse trains. The clutter suppression efficiency of weighting is calculated both for unilateral weighting in the receiver and for bilateral weighting in both receiver and transmitter. The significance of additional phase weighting is discussed and the results for pure amplitude weighting are compared with publishedwork on phase and amplitude weighting.     

Clutter Spectra of Low PRF AMTI Pulse-Doppler Radar

Approximate expressions are derived for the video clutter spectra in the receiver of a low pulse repetition frequency (PRF), airborne moving target indicator (AMTI), pulse-Doppler radar for both step-scanning and continuous-scanning antennas. The receiver is assumed to process the received waveform with a clutter-tracking oscillator and a window function is employed to obtain short-term spectra. Except for the broadening effects of the window function, it is shown that the clutter spectrum can be simply related to the antenna voltage-gain pattern. It is further shown, in the scanning antenna case, that the combined spectral broadening due to platform motion and antenna scanning cannot be assumed to be the result of the convolution of the separate effects unless the antenna gain pattern has a Gaussian shape. The approximate clutter expressions are illustrated by examples and are shown to agree well with the results of computer calculations.     

Hard Limiting in Synthetic Aperture Signal Processing

In synthetic aperture radar a large linear phased array is formed from the rapid movement of a single element through each position in the array. Storage and coherent combining of the successive radar echoes are central to the array-forming process. Optical processing is the most common technique because of the efficiency with which Fourier transformation may be accomplished with simple optics. Real-time operation, however, requires all-electronic processing, which is difficult to accomplish because of the huge quantity of data to be manipulated. Dynamic range compression by hard limiting may ease the problem by reducing the number of bits per frame. The effects of hard limiting are analyzed in this paper. It is shown that large targets simultaneously illuminated by the radar antenna will produce image targets or ghosts displaced in angle. Statistically homogeneous clutter will "linearize" the hard-limited receiver and suppress the ghosts without loss in contrast, as does thermal noise if it is larger than the target echoes. Pulse compression reduces the probability of images from prominent targets. Judicious choice of the pulse-compression waveform is a powerful tool for destroying coherent buildup of images from all large targets not in the same range resolution cell. Linear FM, the most common choice, unfortunately does not exhibit this desirable property.