基于自适应网格的钝头体激波诱导燃烧现象数值模拟研究

钝头体激波诱导燃烧是爆震研究的一个基本问题。针对化学恰当量比的H2/Air预混气在Ma=4.79和Ma=6.46时的激波诱导燃烧现象开展数值模拟研究，采用基于有限体积法的块结构自适应网格加密程序AMROC对带化学反应源项的轴对称Euler方程解耦求解，考察了数值模拟中不同形式的MUSCL重构格式、限制器类型以及化学反应机理等重要因素对模拟结果的影响。结果表明，程序能够根据设定的加密判据较好地实现网格自适应加密，减小总网格量，实现高效数值模拟。通过与实验数据的对比，表明非定常激波诱导燃烧算例的准确程度不仅取决于化学反应机理，也取决于限制器类型，而采用两种不同形式的MUSCL重构格式获得的振荡频率则几乎一致，与试验结果的误差分别为1.17%和0.97%。模拟对比经典的Jachimowski机理和近年来新发展的几种包含压力相关反应步的氢/氧反应机理，模拟结果表明：对于Ma=4.79时的非定常激波诱导燃烧模拟，经典的Jachimowski机理仍然是能够给出与实验结果最接近的反应机理；而对于Ma=6.46时的定常激波诱导燃烧模拟，几种反应机理均能给出与实验吻合较好的结果。     

热障涂层在涡轮叶片应用中的热防护有效性

建立了含热障涂层的涡轮叶片简化传热模型,通过理论推导建立了热障涂层的有效性判据,并基于此进行了热防护有效性分析。理论分析与数值实验表明:由热障涂层带来的复合传热表面传热系数的变化会显著影响热障涂层的热防护效果；在发动机典型工况下,对于处于高温区的高压涡轮叶片前缘处,热障涂层引起的复合传热表面传热系数变化率最大值的范围为1.25%~10.83%以满足热防护有效性要求。在工程中应特别注意由于热障涂层的应用带来的复合传热表面传热系数的变化,否则会导致热防护失效,甚至产生反效果。      

三维针刺C/SiC复合材料与30CrSiMoVA对偶的摩擦磨损性能与机理

通过MM-1000Ⅱ摩擦试验机,研究了三维针刺C/SiC复合材料与30CrSiMoVA对偶的摩擦磨损性能,并结合SEM,XRD,EDS、热力学计算以及刹车过程温度场有限元模拟,分析了刹车过程中的摩擦磨损机理和物相转变.结果表明:随着初始刹车速率的增加,三维针刺C/SiC复合材料与30CrSiMoVA对偶刹车的平均摩擦系...     

Modeling the broadband persistent emission of magnetars

In this paper, we discuss our first attempts to model the broadband persistent emission of magnetars within a self-consistent, physical scenario. We present the predictions of a synthetic model that we calculated with a new Monte Carlo 3D radiative code. The basic idea is that soft thermal photons (e.g. emitted by the star surface) can experience resonant cyclotron upscattering by a population of relativistic electrons treated in the twisted magnetosphere. Our code is specifically tailored to work in the ultra-magnetized regime; polarization and QED effects are consistently accounted for, as well different configurations for the magnetosphere. We discuss the predicted spectral properties in the 0.1–1000 keV range, the polarization properties, and we present the model application to a sample of magnetars soft X-ray spectra.     

铝合金厚板搅拌摩擦焊焊缝疏松缺陷形成机理

采用圆锥形搅拌头焊接20mm厚的7075-T6铝板,分析焊接过程中焊缝内部疏松缺陷的形成过程及原因。研究表明,焊缝表面成形良好,无明显缺陷。但是,在焊缝轴肩区和焊核区之间出现了疏松缺陷。分析认为,焊缝上、下部金属温度差太大,导致其塑性流动行为发生变化是疏松缺陷形成的主要原因。搅拌摩擦焊(FSW)过程中,焊缝上部金属温度较高,而底部温度仍然很低,脱离搅拌针端部的塑化金属在周围冷金属巨大的变形抗力作用下转而沿搅拌针表面往上迁移。到达轴肩区下方汇聚区时,由于轴肩区金属温度高,向下的挤压力太小,导致回迁上来的塑化金属继续往上迁移并冲破轴肩区而沿轴肩边缘溢出形成飞边。汇聚区内没有足够的塑化金属填充、焊缝无法被压实而产生疏松孔洞。通过建立疏松缺陷形成的物理模型,可以更直观地反映出焊缝金属流动形态及缺陷形成过程。     

The beaming of external Compton emission

We consider a relativistically moving blob consisting of an isotropic electron distribution that Compton-scatters photons from an external isotropic radiation field. We compute the resulting beaming pattern, i.e. the distribution of the scattered photons, in the blob frame as well as in the observer’s frame by using the full Klein–Nishina cross section and the exact incident photon distribution. In the Thomson regime the comparison of our approach with Dermer (1995) results in concurrent characteristics but different absolute number of the scattered photons by a factor of f_corr = 3.09. Additionally, our calculation yields a slightly lower boost factor which varies the more from the corresponding value in Dermer (1995) the higher the spectral index p of the electron distribution gets.     

Moderate geomagnetic storms and their ionospheric effects at middle and low latitudes

This paper reports the global response of the mid high and low latitude ionosphere in four longitudinal sectors to two moderate geomagnetic storms that occurred during 2007 (the more intense storms occurred that year). The results obtained during these storms show that the ionospheric effects in general are not moderate in magnitude, showing an important degree of complexity as during intense storms. The outstanding features produced during the storms are significant positive storm effects at mid-high latitudes during the main phase/first part of the recovery, positive effects after the onset of the storm followed by negatives effects at middle latitudes and delayed positive effects during the night-time hours in the trough of the equatorial anomaly (“dusk” effect). Possible physical mechanisms for controlling the morphology of the ionosphere during these events are considered.     

On the electrodynamics of counter stream in pulsar’s inner annular cap region

The electric properties of pulsar’s inner annular gap are explored in this paper. Under two main assumptions, (1) the pulsar is alive, (2) the total charge of pulsar should not vary with time, the condition for the acceleration of negative particle in the annular region is derived. The acceleration condition is j₋ ? 0.5j₊, i.e., the current carried by negative particles is greater than or equal to 0.5 times of the current carried by positive particles. This condition holds even when the backward flow of positive particles exists in the annular region. It is noted that the outflow of negative particles offers good opportunities to understand the current closure problem of pulsar as well as wide radiation beam of pulsar observed at high energy band.     

New evidence for strong non-thermal effects in Tycho’s supernova remnant

For the case of Tycho’s supernova remnant (SNR), we present the relation between the blast wave and contact discontinuity radii calculated within the nonlinear kinetic theory of cosmic ray (CR) acceleration in SNRs. It is demonstrated that these radii are confirmed by recently published Chandra measurements which show that the observed contact discontinuity radius is very close to the shock radius. Therefore a consistent explanation of these observations can be given in terms of efficient CR acceleration which makes the medium more compressible.     

基于核心能力的增长型战略机制的构建

增长型战略的实施是企业发展过程中必不可少的环节,也是对企业创新能力的严峻考验.基于增长型战略型的重要性及特征,必须以核心能力为基础来构建其机制.具体表现在实行以核心能力为基础的关联多元化,建立基于核心能力的隔绝机制,在产业链的某一点横向扩张,培育基于技术轨道和技术平台的创新集群.