剪切成像技术:针对复合材料无损检测的一种光学检测方法

随着复合材料构件被广泛地应用于航空、航天和船舶等各个领域,这些复合材料构件的安全对产品质量起到关键的作用,具有重要的经济价值。无论是制造过程还是维修过程,都需要对复合材料构件进行快速的缺陷检测。剪切成像技术是一种高效的、全方位缺陷检测技术,并被广泛地认为是针对现代复合材料构件的可靠的检测技术。本文将介绍剪切成像技术最新的发展动态和软件技术,并概述其应用潜力。     

Multimodal characteristics of a piezoelectric lead zirconate titanate element impacted with iron particles having velocities above 20 km/s

The responses of a piezoelectric lead zirconate titanate (PZT) element to hypervelocity collisions were experimentally studied. In this study, the particles of masses ranging from 0.3 to 10 fg were made to collide with PZT at velocities between 20 and 96 km/s. The amplitude and the corresponding rise time of the single-pulse output signals that were produced in the piezoelectric PZT element were measured to determine the possible collision states. The results revealed an apparently multimodal output; three classes were assumed to be involved in the pulse formation mechanism. The amplitude and rise time were sensitive to the collision velocity. The multimodal behavior implied that the PZT-based cosmic dust detectors should be calibrated according to the class they belong to.     

The Galileo Dust Detector

The Galileo Dust Detector is intended to provide direct observations of dust grains with masses between 10^-19 and 10^-9 kg in interplanetary space and in the Jovian system, to investigate their physical and dynamical properties as functions of the distances to the Sun, to Jupiter and to its satellites, to study its interaction with the Galilean satellites and the Jovian magnetosphere. Surface phenomena of the satellites (like albedo variations), which might be effects of meteoroid impacts will be compared with the dust environment. Electric charges of particulate matter in the magnetosphere and its consequences will be studied; e.g., the effects of the magnetic field on the trajectories of dust particles and fragmentation of particles due to electrostatic disruption. The investigation is performed with an instrument that measures the mass, speed, flight direction and electric charge of individual dust particles. It is a multicoincidence detector with a mass sensitivity 10⁶ times higher than that of previous in-situ experiments which measured dust in the outer solar system. The instrument weighs 4.2 kg, consumes 2.4 W, and has a normal data transmission rate of 24 bits s^-1 in nominal spacecraft tracking mode. On December 29, 1989 the instrument was switched-on. After the instrument had been configured to flight conditions cruise science data collection started immediately. In the period to May 18, 1990 at least 168 dust impacts have been recorded. For 81 of these dust grains masses and impact speeds have been determined. First flux values are given.     

Mercury Dust Monitor (MDM) Onboard the Mio Orbiter of the BepiColombo Mission

Space Science Reviews - In this chapter, we review the contribution of space missions to the determination of the elemental and isotopic composition of Earth, Moon and the terrestrial planets, with...     

Instrument study of the Lunar Dust eXplorer (LDX) for a lunar lander mission

One of the highest-priority issues for a future human or robotic lunar exploration is the lunar dust. This problem should be studied in depth in order to develop an environment model for a future lunar exploration. A future ESA lunar lander mission requires the measurement of dust transport phenomena above the lunar surface. Here, we describe an instrument design concept to measure slow and fast moving charged lunar dust which is based on the principle of charge induction. LDX has a low mass and measures the speed and trajectory of individual dust particles with sizes below one micrometer. Furthermore, LDX has an impact ionization target to monitor the interplanetary dust background. The sensor consists of three planes of segmented grid electrodes and each electrode is connected to an individual charge sensitive amplifier. Numerical signals were computed using the Coulomb software package. The LDX sensitive area is approximately 400 cm². Our simulations reveal trajectory uncertainties of better than 2° with an absolute position accuracy of better than 2 mm.     

Comment: On the different approaches of Rayleigh optical depth determination

Srivastava et al. (2009) presented Rayleigh scattering cross-sections and optical depths for Earth’s atmosphere that are approximately 3% smaller than previously accepted. Their analysis was based on quantum-mechanical theory for anisotropic scattering in the Cabannes line published in papers that seem to have introduced some confusion about determining the anisotropy and King factors. This comment clarifies these factors and shows that including the frequency-shifted rotational Raman lines gives the traditional King factor and the correct Rayleigh scattering for the optical depth.     

Interpersonal relationships in isolation and confinement: long-term bed rest in head-down tilt position

The long-term bed-rest was organized by ESA and CNES, in order to simulate the physiological effects of weightlessness: eight volunteers had to stay 42 days in bed, in a head down tilt position (-6 degrees). There were two subjects in a room, they could not be alone and it was difficult for them to have their own personal space and intimacy. In these circumstances, as in outer space, interpersonal relationships were of prime importance. This situation enabled us, through systematic observation, to analyze the evolution of the relational behavior in dyads, and to quote some social indicators of adaptation. Results show significant withdrawal, and the time spent alone was marked by the emergence, during the experiment, of specific preferential activities. Behavioral contagion was observed in each dyad (people engaged in the same activities at the same time), except in the one case of abandon. Moreover, the highest rates of inactivity and withdrawal were noted in this case. Verbal indicators were useful to comment these results and showed that, for all the dyads, one of the two subjects always played a regulating role by expressing a very positive perception of the situation. These results emphasize the importance of psycho-sociological factors in isolation and confinement. Thus, it appears that different modalities of interpersonal relationships, and not only verbal interactions, play a significant role in adaptation to stress situations.     

In situ measurements of interstellar dust with the Ulysses and Galileo spaceprobes

Interstellar dust was first identified by the dust sensor onboard Ulysses after the Jupiter flyby in February 1992. These findings were confirmed by the Galileo experiment on its outbound orbit from Earth to Jupiter. Although modeling results show that interstellar dust is also present at the Earth orbit, a direct identification of interstellar grains from geometrical arguments is only possible outside of 2.5 AU. The flux of interstellar dust with masses greater than 6 · 10^–14 g is about 1 · 10^–4 m ^–2 s ^–1 at ecliptic latitudes and at heliocentric distances greater than 1AU. The mean mass of the interstellar particles is 3 · 10^–13 g. The flux arrives from a direction which is compatible with the influx direction of the interstellar neutral Helium of 252° longitude and 5.2° latitude but it may deviate from this direction by 15 – 20°.     

Interstellar Dust in the Solar System

The Ulysses spacecraft has been orbiting the Sun on a highly inclined ellipse almost perpendicular to the ecliptic plane (inclination 79°, perihelion distance 1.3 AU, aphelion distance 5.4 AU) since it encountered Jupiter in 1992. The in situ dust detector on board continuously measured interstellar dust grains with masses up to 10⁻¹³ kg, penetrating deep into the solar system. The flow direction is close to the mean apex of the Sun’s motion through the solar system and the grains act as tracers of the physical conditions in the local interstellar cloud (LIC). While Ulysses monitored the interstellar dust stream at high ecliptic latitudes between 3 and 5 AU, interstellar impactors were also measured with the in situ dust detectors on board Cassini, Galileo and Helios, covering a heliocentric distance range between 0.3 and 3 AU in the ecliptic plane. The interstellar dust stream in the inner solar system is altered by the solar radiation pressure force, gravitational focussing and interaction of charged grains with the time varying interplanetary magnetic field. We review the results from in situ interstellar dust measurements in the solar system and present Ulysses’ latest interstellar dust data. These data indicate a 30° shift in the impact direction of interstellar grains w.r.t. the interstellar helium flow direction, the reason of which is presently unknown.