Multimodal characteristics of a piezoelectric lead zirconate titanate element impacted with iron particles having velocities above 20 km/s

The responses of a piezoelectric lead zirconate titanate (PZT) element to hypervelocity collisions were experimentally studied. In this study, the particles of masses ranging from 0.3 to 10 fg were made to collide with PZT at velocities between 20 and 96 km/s. The amplitude and the corresponding rise time of the single-pulse output signals that were produced in the piezoelectric PZT element were measured to determine the possible collision states. The results revealed an apparently multimodal output; three classes were assumed to be involved in the pulse formation mechanism. The amplitude and rise time were sensitive to the collision velocity. The multimodal behavior implied that the PZT-based cosmic dust detectors should be calibrated according to the class they belong to.     

High-Definition Television System Onboard Lunar Explorer Kaguya (SELENE) and Imaging of the Moon and the Earth

The High-Definition television (HDTV) system onboard the Japanese lunar explorer Kaguya (SELENE) consists of a telephotographic camera and a wide-angle camera that each have 2.2 M-pixel IT-CCDs (interline transfer charge-coupled devices) and LSIs (large-scale integrated circuits) of the several-million-gates class. One minute-long motion pictures acquired by the HDTV system at 30 fps (frames per second) are recorded in a 1 GB semiconductor memory after compression, and then transmitted to a ground station. In the development of the space-going HDTV system, a commercial ground-model HDTV system was extensively modified and evaluated for its suitability to withstand the harsh environment of space through environmental tests. The HDTV acquired a total of 6.3 TB of movies and still images of the Earth and the Moon over the mission period that started on September 29, 2007, and ended on June 11, 2009. Footage of an “Earth-rise” and an “Earth-set” on the lunar horizon were captured for the first time by the HDTV system. During a lunar eclipse, images of the Earth’s “diamond ring” were acquired for the first time. The CCDs and the instruments used in the system remained in good working order throughout the mission period, despite the harsh space environment, which suggests a potential new approach to the development of instruments for use in space.     

Mercury Dust Monitor (MDM) Onboard the Mio Orbiter of the BepiColombo Mission

Space Science Reviews - In this chapter, we review the contribution of space missions to the determination of the elemental and isotopic composition of Earth, Moon and the terrestrial planets, with...     

Laboratory calibration measurements of a piezoelectric lead zirconate titanate cosmic dust detector at low velocities

A cosmic dust monitor for use onboard a spacecraft is currently being developed using a piezoelectric lead zirconate titanate element (PZT). Its characteristics of the PZT sensor is studied by ground-based laboratory impact experiments using hypervelocity particles supplied by a Van de Graaff accelerator. The output signals obtained from the sensor just after the impact appeared to have a waveform that was explicitly related to the particle’s impact velocity. For velocities less than ∼6 km/s, the signal showed an oscillation pattern and the amplitude was proportional to the momentum of the impacting particle. For higher velocities, the signal gradually changed to a single waveform. The rise time of this single waveform was proportional to the particle’s velocity for velocities above ∼6 km/s. The present paper reports on results for the low velocity case and especially discusses the effect of an outer coating of the sensor with a paint, which is used to reduce heating by solar radiation.     

Characteristics of piezoelectric lead zirconate titanate multilayered detector bombarded with hypervelocity iron particles

A cosmic dust detector is currently being developed using a piezoelectric lead zirconate titanate (PZT) element. The characteristics of the multilayered detector (MD), which was composed of one hundred PZT disks, were investigated by bombarding it with hypervelocity iron particles supplied by a Van de Graaff accelerator. It was confirmed that there was a linear relationship between the signal amplitude observed from MD and the momentum of the particles. As compared with the single-layered detector (SD) that was composed of one PZT disk, it was found that the sensitivity of MD was ∼3 times higher than that of SD within the limits of the experimental conditions.     

活性剂电弧焊机理的初步研究

本文针对不锈钢活性剂电弧焊过程,分析了不同种类活性剂(含单组分活性剂)对焊缝成形、接头熔深、电弧宏观形态的影响,并采用X射线透射微焦高速录像系统,观测了熔池内部液态金属的流动状态和特征,从而,对于不锈钢活性剂氩弧焊过程中出现的现象和相应的机理有初步的认识.实验结果表明,对比常规氩弧焊,在A-TIG焊接条件下,熔池液态金属流动具有剧烈的向内流动特征.进一步的探索性试验研究表明,活性剂技术--这种在钨极氩弧焊工业应用中已被普遍认可和接受的焊接技术很可能在其他弧焊领域得到更广泛的应用.     

CMEs and active regions on the sun

The relationship between active regions (ARs) and coronal mass ejections (CMEs) is studied. For this purpose a statistical analysis of 694 CMEs associated with ARs was carried out. We considered the relationship between properties of the CMEs and ARs characterized using the McIntosh classification. We demonstrated that CMEs are likely to be launched from ARs in the mature phase of their evolution when they have complex magnetic field. The fastest and halo CMEs can be ejected only from the most complex ARs (when an AR is a bipolar group of spots with large asymmetric penumbras around the main spot with many smaller spots in the group). We also showed that the wider events have a tendency to originate from uncomplicated magnetic structures. This tendency was used for estimation of the real angular widths of the halo CMEs. The probability of launching of fast CMEs increases together with increase of the complexity and size of ARs. The widest, but slow, CMEs originate from the simplest magnetic structure which are still able to produce CMEs. Our results could be useful for forecasting of space weather.     

Response of a pentagonal PZT element as a component of a 4π-real-time detector

The detector characteristics of a pentagonal element were studied by colliding it with hypervelocity micro-particles. A charge-sensitive amplifier was developed for the element of its capacitance ∼10 nF. The output amplitudes were expressed as a linear function of the momentum at collision. Empirical formulas obtained from on-ground experiments could be used for the calibration of the detector. The pentagonal element was potential to measure the momentum during collision from the output amplitude. A set of electrodes on the surface was used to confirm the measurement of the coordinates at collision. A possible application of this pentagonal element on a real-time dust detector was discussed.     

A comparison of total reaction cross section models used in particle and heavy ion transport codes

Understanding the interactions and propagations of high energy protons and heavy ions are essential when trying to estimate the biological effects of Galactic Cosmic Rays (GCR) and Solar Particle Events (SPE) on personnel in space. To be able to calculate the shielding properties of different materials and radiation risks, particle and heavy ion transport codes are needed. In all particle and heavy ion transport codes, the probability function that a projectile particle will collide within a certain distance x in the matter depends on the total reaction cross sections, and the calculated partial fragmentation cross sections scale with the total reaction cross sections. It is therefore crucial that accurate total reaction cross section models are used in the transport calculations. In this paper, different models for calculating nucleon–nucleus and nucleus–nucleus total reaction cross sections are compared with each other and with measurements. The uncertainties in the calculations with the different models are discussed, as well as their overall performances with respect to the available experimental data. Finally, a new compilation of experimental data is briefly presented.