关于Ada的面向对象扩充

使用面向对象风范作出的软件产品能很容易地体现软件工程软件质量保证的诸原则。倡导基于Ada的面向对象的程序设计是一个正确的方向。因为Ada不是一个面向对象的编程语言,使用Ada不可能自然而又有效地进行面向对象的程序设计。因此,必须对Ada进行面向对象的扩充。本文讨论进行相应扩充所涉及到的一些问题。     

The gas pixel detector as a solar X-ray polarimeter and imager

The Sun is the nearest astrophysical source with a very intense emission in the X-ray band. The study of energetic events, such as solar flares, can help us to understand the behaviour of the magnetic field of our star. There are in the literature numerous studies published about polarization predictions, for a wide range of solar flares models involving the emission from thermal and/or non-thermal processes, but observations in the X-ray band have never been exhaustive.The gas pixel detector (GPD) was designed to achieve X-ray polarimetric measurements as well as X-ray images for far astrophysical sources. Here we present the possibility to employ this instrument for the observation of our Sun in the X-ray band.     

高等职业教育学制改革的思考

本文分析了高等职业教育实施两年制改革的必要性,探讨了实施两年制改革应注意的问题,提出了如何搞好两年制改革的对策和建议。     

Modeling and analysis of mover gaps in tubular moving-magnet linear oscillating motors

A tubular moving-magnet linear oscillating motor (TMMLOM) has merits of high efficiency and excellent dynamic capability. To enhance the thrust performance, quasi-Halbach permanent magnet (PM) arrays are arranged on its mover in the application of a linear electro-hydrostatic actuator in more electric aircraft. The arrays are assembled by several individual segments, which lead to gaps between them inevitably. To investigate the effects of the gaps on the radial magnetic flux density and the machine thrust in this paper, an analytical model is built considering both axial and radial gaps. The model is validated by finite element simulations and experimental results. Distributions of the magnetic flux are described in condition of different sizes of radial and axial gaps. Besides, the output force is also discussed in normal and end windings. Finally, the model has demonstrated that both kinds of gaps have a negative effect on the thrust, and the linear motor is more sensitive to radial ones.     

分离式机械压汽蒸馏系统的实验

针对传统机械压汽蒸馏的不足,提出分离式机械压汽蒸馏系统.建立了一套容量为1.5 m3/d的单效分离式机械压汽蒸馏系统并对其进行实验研究.实验系统主要由两套旋转蒸发器、冷凝器以及压缩机组成.通过改变压缩机转速和蒸发温度来研究系统的性能.结果表明在蒸馏水产量一定的前提下压缩机进口压力和冷凝器进口压力随着压缩机转速的增加而逐渐下降,换热温差随着压缩机转速的增加而增加,最高温差稳定在8.5℃左右.通过改变系统的真空度获得不同的蒸发温度,蒸发温度越高,蒸馏产量越高,系统性能也越好.      

压电智能柔性梁振动主动控制研究

利用压电陶瓷作为作动器,对柔性悬臂梁进行了振动主动控制研究.分析了压电结构振动主动控制的原理和方法.采用独立模态控制法对柔性悬臂梁的前两阶模态实施主动控制.实验结果表明,通过振动主动控制明显增加了柔性悬臂梁的结构阻尼,取得了十分有效的振动抑制效果.      

SMARC变形控制及神经网络建模

在复合材料层板中偏离中性层的位置铺设镍钛形状记忆合金丝,然后通电加热镍钛丝,使其在形状回复过程中产生巨大的回复力,从而使层板结构发生弯曲变形.由于形状记忆合金的非线性以及合成的智能材料结构的应力、应变分布和形状变化规律都非常复杂,尝试引入人工神经网络来建立以可控参量(电流强度)为输入变量、易测参量(稳态挠度)为输出变量的模型,所建模型的预测数据与实验数据之间符合得较好,相对误差小于9%.      

空调换热翅片挠流窗的成形工艺及模具设计

简要介绍翅片挠流窗的作用,几种常用的挠流窗形式,成形工艺分析,以及相应的模具设计实例。