自适应DBF与空间谱估计

讨论了自适应数字波束形成(DBF)技术和超分辨空间谱估计技术,并提出了一种基于信号协方差矩阵特征分解的时-空二维信号高分辨谱估计算法。以上技术应用于相控阵雷达系统,可以精确获得多个运动目标的方位信息和多普勒信息。文章最后给出了计算机模拟结果。     

飞机V型外倾双垂尾载荷校准技术

根据垂尾载荷校准及建模需求,对飞机V型外倾双垂尾结构受载情况进行了分析和简化,确定了校准试验载荷,研制了垂尾载荷校准试验专用龙门梁架。采用液压协调加载技术,完成了外倾双垂尾载荷校准试验,建立了满足测载要求的载荷模型。此种方法充分利用了左右垂尾外倾、双垂尾之间空间较大的特点,对左右垂尾对称施加向外的单点、多点载荷,加载载荷侧向分量左右自平衡,垂向分量依靠飞机自身重量即可平衡,飞机不需要复杂的固定与约束。试验中采用先搭建龙门框架,再停放飞机的方法,降低了试验风险、加快了试验进度,取得了良好的试验结果,对其他此类结构的载荷校准具有一定的借鉴作用。     

Modeling novel methodologies for unmanned aerial systems–Applications to the UAS-S4 Ehecatl and the UAS-S45 Bálaam

The rising demand for Unmanned Aerial Systems(UASs) to perform tasks in hostile environments has emphasized the need for their simulation models for the preliminary evaluations of their missions. The efficiency of the UAS model is directly related to its capacity to estimate its flight dynamics with minimum computational resources. The literature describes several techniques to estimate accurate aircraft flight dynamics. Most of them are based on system identification. This paper presents an alternative methodology to obtain complete model of the S4 and S45 unmanned aerial systems. The UAS-S4 and the UAS-S45 models were divided into four sub-models, each corresponding to a specific discipline: aerodynamics, propulsion, mass and inertia, and actuator. The‘‘aerodynamic" sub-model was built using the Fderivatives in-house code, which is an improvement of the classical DATCOM procedure. The ‘‘propulsion" sub-model was obtained by coupling a two-stroke engine model based on the ideal Otto cycle and a Blade Element Theory(BET) analysis of the propeller. The ‘‘mass and the inertia" sub-model was designed utilizing the Raymer and DATCOM methodologies. A sub-model of an actuator using servomotor characteristics was employed to complete the model. The total model was then checked by validation of each submodel with numerical and experimental data. The results indicate that the obtained model was accurate and could be used to design a flight simulator.     

高效相变蓄热装置结构设计及试验研究

文章针对某飞行器舱内大功率设备控温需求,提出了相变蓄热技术解决方案,建立了平板式肋片强化相变蓄热装置物理模型,根据大功率伺服舵机控制器热耗及工作模式等参数条件,采用十八烷为相变吸热材料,设计了一台高效平板式肋片相变蓄热装置,并通过地面试验研究,验证了该装置的控温性能、稳定性及等温性。试验结果表明:所设计的肋片式高效相变蓄热装置,在120 W热源功率下,可以将设备温度控制在50℃以下超过3000 s;榫槽形式的封装结构具有良好的密封性能,相变蓄热装置在多次相变循环后无泄漏;在3000 s测试时间内相变装置内部最大温差为3℃,具有很好的等温性。     

多飞行器动态目标追踪协同控制研究

多飞行器追踪动态目标是一个协同控制问题,需要根据目标飞行状态,协同各个追踪飞行器的飞行状态,最终能够在某动态的最佳点实现同时到达。考虑到目标具有较强的机动性,轨迹通常为非线性的,设计了一种基于非线性轨迹预测的、以剩余时间为控制变量的一致性控制方案。仿真结果表明,提出的控制方案能够实现空间位置相距较远的多飞行器动态追踪,具有较好的灵活性和收敛性,目标轨迹的预测结果与实际轨迹误差较小,恰当的轨迹估计有助于缩短追踪时间,提高追踪效率。     

WSO-UV project

During last three decades, astronomers have enjoyed continuous access to the 100–300 nm ultraviolet (UV) spectral range where the resonance transitions of the most abundant atoms and ions (at temperatures between 3000 and 300 000 K) reside. This UV range is not accessible from ground-based facilities. The successful International Ultraviolet Explorer (IUE) observatory, the Russian ASTRON mission and successor instruments such as the Galaxy Evolution Explorer (GALEX) mission or the COS and STIS spectrographs on-board the Hubble Space Telescope (HST) prove the major impact of observations in the UV wavelength range in modern astronomy. Future access to space-based observatories is expected to be very limited. For the next decade, the post-HST era, the World Space Observatory – Ultraviolet (WSO–UV) will be the only 2-m class UV telescope with capabilities similar to the HST. WSO–UV will be equipped with instruments for imaging and spectroscopy and it will be a facility dedicated, full-time, to UV astronomy. In this article, we briefly outline the current status of the WSO–UV mission and the science management plan.     

Particle swarm optimization applied to hypersonic reentry trajectories

This paper presents the novel use of the particle swarm optimization(PSO)to generate the end-to-end trajectory for hypersonic reentry vehicles in a quite simple formulation.The velocitydependent bank angle profile is developed to reduce the search space of unknown parameters based on the constrained PSO algorithm.The path constraints are enforced by setting the fitness function to be infinite on condition that the particles violate the maximum allowable values.The PSO algorithm also provides a much easier means to satisfy the terminal conditions by adding penalty terms to the fitness function.Furthermore,the approximate reentry landing footprint is fast constructed by incorporating an interpolation model into the standardized bank angle profiles.Numerical simulations demonstrate that the PSO method is a feasible and flexible tool to generate the end-to-end trajectory and landing footprint for hypersonic reentry vehicles.     

基于人性假设理论的双师型教师培养激励机制研究

高等职业院校是我国深入实施十二五科教兴国战略和人才强国战略的重要平台和基地，随着高等职业院校规模的扩大．高技能人才培养所需要的高素质师资队伍的建设变得更加重要。从人性假设理论人手，分析了高等职业院校培养双师型师资队伍存在的不足之处，指出了双师型教师的培养和队伍建设必须充分考虑到教师这个主题的特殊性，需要在生理需求至自我实现需求的各个层次上做出合理的决策，有效激励教师，达到双师型教师培养和学校发展统一的目标。     

民用航空发动机型号合格审定方法研究

随着中国民用航空发动机的发展,对其适航取证迫在眉睫,型号合格审定是整个适航审定的基础和核心,对其方法的研究很有应用价值。在《航空器型号合格审定程序》基础上对型号合格审定程序作了较充分地研究,在所获得研究成果基础上以Teamcenter为平台开发了航空发动机适航信息管理系统,该系统可用于对民用航空发动机型号合格审定信息的管理与审定流程的控制,可为更好地管理民用航空发动机适航信息以取得型号合格证提供参考。