Oblique shock train motion based on schlieren image processing

In this paper, shock train motion in a Mach number 2.7 duct is studied experimentally, and large numbers of schlieren images are obtained by a high-speed camera. An image processing method based on Maximum Correlation Detection (MCD) is proposed to detect shock train motion from the schlieren images, based on which the key structures, e.g., separation positions and separation shock angles on the top and bottom walls, can be analysed in detail. The oscillations of the shock train are generated by rhombus and ellipse shafts at various excitation frequencies. According to the analysis of MCD results, the distributions of the frequency components of shock train oscillation generated by the two shafts are distinctly different, in which the motion generated by the ellipse shaft is much smoother; shock train motion is mainly characterized by the oscillation of separation position while the separation shock strength is not so sensitive to downstream disturbance; there is a hysteresis loop relation between the downstream pressure and separation position.     

旋转爆轰波与涡轮平面叶栅相互作用数值模拟

由于旋转爆轰燃烧室具有自增压特性，可提高热力循环效率，因此将旋转爆轰燃烧室应用于燃气轮机可进一步提高系统的性能。基于非稳态雷诺时均Navier-Stokes方法，采用剪切应力输运k-ω湍流模型，建立旋转爆轰燃烧室与涡轮平面叶栅耦合计算模型，研究旋转爆轰燃烧室内的复杂波系与涡轮叶片的相互作用，分析涡轮叶栅对高频爆轰压力振荡的抑制作用。结果表明：旋转爆轰燃烧室内的燃气在涡轮叶栅内加速，并且在斜激波后的局部区域马赫数的增加更为明显。斜激波与涡轮静转子叶片的前缘、压力面、吸力面以及尾缘相互作用，由于旋转爆轰波不同的传播方向，使得斜激波与静子叶片呈相互垂直或平行，进而形成两种不同的波系结构。涡轮叶栅对高频压力振荡存在明显的抑制作用，涡轮叶栅上下游高频压力振荡幅值的衰减率达到80%以上。研究结果展示了旋转爆轰波作用下涡轮叶栅内复杂波系结构特征，并对基于爆轰燃烧推进技术的应用提供了一定的理论基础。     

二维耦合天线阵图结构模型在波束转换和失效分析中的应用

提出了耦合振荡器阵列的一种图结构模型，利用该模型对耦合振荡器阵列有源天线阵的波束转换时间、振荡器失效和耦合网络失效引起的阵列失效概率进行了分析和仿真。从分析结果看，阵列耦合网络具有一定冗余性的设计可以缩短阵列波束转换时间，提高阵列的可靠性。     

天梯动力学与控制研究进展

简要介绍了天梯系统的组成和初始部署形式。在此基础上，针对天梯初始部署和运行中存在的复杂动力学与控制问题，分别从天梯动力学建模、天梯稳定性、天梯绳索振荡、攀爬器运动引起的绳索振荡及振荡抑制、天梯初始部署动力学五个方面分析归纳了天梯动力学与控制的发展状况，最后对天梯动力学与控制的发展方向进行了总结及展望。     

Influence of coupled characteristics on the internally staged combustor under low power operation

An ultra low emissions combustor, namely low emission stirred swirl (LESS) combustor was studied, based on a scheme of internally staged/lean premixed and prevaporized (LPP) combustion. The LESS combustor consists of central pilot stage and outer surrounded coaxially main stage, between which there exists a physical isolation, namely the step height. The existence of step height delayed the pilot and main jets mixing. Experimental and numerical studies were carried out to investigate the influence of the step height on the combustion performance. A single dome rectangular combustor was utilized to conduct the lean lightoff and blowout experiments, and pollutant emission experiments. The experimental results showed that with the increase of step height by 38%, the lean lightoff and blowout fuel air ratio decreased by 574% and 375%, the NOx emission increased by 35.1%, and the combustion efficiency increased by 1.78%; while the CO,unburned hydrocarbons (UHC) emissions decreased. Furthermore, the total pressure loss was kept nearly constant. Non reacting and reacting flow fields were numerically investigated to analyze the coupled characteristics of pilot and main jets with different step heights. A comparison of flow characteristics, spray structure, and combustion component as well as temperature field with different step heights was conducted. The numerical results showed that the increase of the step height shifted the peak velocity outwards. The enlargement of the primary recirculation zone (PRZ) resulted in the increase of the combustion efficiency and NOx emission, while the CO, UHC emissions decreeased.      

压气机叶顶泄漏流振荡周向传播特性的数值模拟

通过对一低速轴流压气机转子的叶顶泄漏流的振荡特性进行数值研究,发现在大流量工况下,叶顶流场随时间不发生变化.随着流量减小,叶顶流场逐渐产生脉动,同时叶顶泄漏流发生周期性振荡,表现为叶顶泄漏涡的产生位置、涡结构形态及撞击在相邻叶片的位置随时间发生变化.叶顶泄漏涡及其导致的脱离涡会导致相邻叶片表面产生低压区,因此叶顶泄漏涡的振荡导致了叶片顶部压力分布的脉动,进而影响了相邻流道叶顶泄漏流的产生.这个叶顶泄漏流与相邻叶片的干涉作用是叶顶流场产生振荡的主要原因.而且,叶顶泄漏流在相邻流道间的振荡状态存在相位延迟,这导致了一个以非叶片数为周期的流动扰动结构绕转子旋转.      

SINS/BDS紧组合系统中自适应 两阶段扩展卡尔曼滤波

在实际应用中，以伪距/伪距率为观测量的SINS/BDS紧组合导航系统，存在量测噪声的统计特性与实际不相符的情况，传统扩展卡尔曼滤波（EKF）方法无法有效解决这一问题，从而引起滤波误差增大。提出了一种SINS/BDS紧组合导航系统的GDOP估算及在线估计量测噪声的自适应两阶段EKF（ATEKF）方法，该方法使用经过紧组合修正后的SINS输出的位置，并结合星历数据中提供的卫星位置求解GDOP。在此基础上，利用GDOP值以及新息，实现了紧组合导航系统的量测噪声方差阵（Rk）的在线实时估计，从而达到自适应滤波的效果，改善导航精度。     

An atmosphere-breathing propulsion system using inductively coupled plasma source

CubeSats have attracted more research interest recently due to their lower cost and shorter production time. A promising technology for CubeSat application is atmosphere-breathing electric propulsion, which can capture the atmospheric particles as propulsion propellant to maintain long-term mission at very low Earth orbit. This paper designs an atmosphere-breathing electric propulsion system for a 3 U CubeSat, which consists of an intake device and an electric thruster based on the inductively coupled plasma. The capture performance of intake device is optimized considering both particles capture efficiency and compression ratio. The plasma source is also analyzed by experiment and simulation. Then, the thrust performance is also estimated when taking into account the intake performance. The results show that it is feasible to use atmosphere-breathing electric propulsion technology for CubeSats to compensate for aerodynamic drag at lower Earth orbit.     

考虑弹体柔性振荡的全捷联导引头制导信息提取

随着拦截导弹弹体长细比的增加和直接侧向力的作用，拦截导弹上全捷联导引头量测信息严重受到弹体弹性振荡和控制力矩激励的影响，从而造成导弹制导精度的下降。针对现有惯导安装在弹体质心附近的振荡波腹处无法敏感导引头振荡的不足，提出了一种在导引头安装微机电陀螺器件测量振荡角速率，构造差分观测量的新状态模型，通过交互式多模型的容积卡尔曼滤波算法实现对视线角速度的解耦和精确提取。通过构建导弹六自由度制导与控制仿真模型，采用蒙特卡洛打靶仿真验证了算法的有效性。仿真结果表明模型重构后的滤波算法可以将弹体振荡的均方根误差压缩到0.5°以内并有效跟踪弹目视线角速率。     

基于ADAMS的行星齿轮系刚柔耦合仿真局部缺陷识别

针对行星齿轮系在工作过程中出现的局部缺陷，将引起齿轮啮合异常，并导致冲击异常，其特征频率就会发生变化。现用ADAMS与ANSYS建立行星齿轮系的刚柔耦合模型，通过快速傅里叶变换（FFT）得到其啮合力的频域曲线，并分析无缺陷行星齿轮系的特征频率、行星轮齿局部缺陷的特征频率、太阳轮齿局部缺陷的特征频率。仿真结果与理论值吻合，说明了所建虚拟样机模型可靠，得到无缺陷行星齿轮系的特征频率是265.34Hz，行星轮齿局部缺陷的特征频率是17.67Hz，太阳轮齿局部缺陷的特征频率是36.13Hz，可用于识别行星齿轮系的行星轮或太阳轮局部缺陷。对行星齿轮系振动特性、可靠性的研究具有一定的指导意义。