舰载机全机落震试验方法

舰载机全机落震试验是在实验室环境下测试舰载机着舰时结构动态载荷、动态响应以及机载设备冲击环境下功能可靠性的重要试验手段。本文提出了舰载机全机落震试验的试验方法,并对试验过程中机翼升力模拟、试验件下沉速度控制、试验件航向速度模拟及机体动态载荷测试等试验过程中的关键技术问题提出了解决方案,并通过试验对技术方案进行了验证。最后通过全机落震试验系统验证了试验方法的可行性及有效性,为舰载机着舰动态载荷及响应的测试提供了可行的试验方法,并为舰载机研制提供可靠的试验数据。     

膜分离器及其机载应用

为了满足飞机放火防爆要求，膜分离器作为机载油箱惰化系统的关键部件在国外军、民机已经装机使用，在国内膜分离器处于研制阶段，正逐步向军、民用飞机推广应用。分析了国内外现状，对膜分离器工作机理进行了阐述，详细论述了膜分离器研制过程中涉及到的膜材料、膜制备工艺、膜分离器，总结了影响膜分离器性能的主要参数；进行了膜分离器在机载惰化中应用的试验研究，总结了研发和应用中得到的经验，有利于膜分离器今后的研发和机载惰化中的应用。     

飞机等表速运动方程与稳态爬升参数计算

为了揭示等表速飞行的内在机理,建立了飞机等表速运动方程,提出了等表速爬升运动参数计算方法。对比等表速和等真空速爬升公式,提出了功率因子的概念,以反映飞机等表速与等真空速爬升所需单位剩余功率之间的关系。针对等表速等推力、等表速等梯度、等表速等升降速度3种典型爬升方式,应用飞机等表速运动方程给出了稳态运动参数计算方法。计算结果表明,3种爬升方式均存在稳态爬升剖面,稳态运动参数与表速呈一一对应关系。     

变质心控制飞行器建模技术及运动机理研究

以单质量块滚转通道变质心控制再入飞行器为研究对象,研究变质心控制飞行器动力学建模技术及其运动机理。基于牛顿力学建模法及多刚体理论建立了变质心控制再入飞行器动力学模型,并对因质量块运动产生的力矩进行了分析。仿真结果表明,由质心偏移引起的附加气动力矩是变质心控制的主导控制力矩,且质量块的不同安装位置及质量比将影响控制性能。     

Process of establishing design requirements and selecting alternative configurations for conceptual design of a VLA

In this study, a process for establishing design requirements and selecting alternative con-figurations for the conceptual phase of aircraft design has been proposed. The proposed process uses system-engineering-based requirement-analysis techniques such as objective tree, analytic hier-archy process, and quality function deployment to establish logical and quantitative standards. Moreover, in order to perform a logical selection of alternative aircraft configurations, it uses advanced decision-making methods such as morphological matrix and technique for order prefer-ence by similarity to the ideal solution. In addition, a preliminary sizing tool has been developed to check the feasibility of the established performance requirements and to evaluate the flight perfor-mance of the selected configurations. The present process has been applied for a two-seater very light aircraft (VLA), resulting in a set of tentative design requirements and two families of VLA configurations: a high-wing configuration and a low-wing configuration. The resulting set of design requirements consists of three categories: customer requirements, certification requirements, and performance requirements. The performance requirements include two mission requirements for the flight range and the endurance by reflecting the customer requirements. The flight performances of the two configuration families were evaluated using the sizing tool developed and the low-wing configuration with conventional tails was selected as the best baseline configuration for the VLA.     

关于先进战斗机结构制造用钛概述

先进战斗机结构制造用金属材料主要包括铝合金、钢铁材料以及钛合金,而钛合金由于兼顾了钢的高强度与铝的低密度以及具有耐腐蚀等优点,在世界各国的新一代武器装备结构选材中越来越受到重视和广泛应用,特别是在先进战斗机的结构制造中尤为如此。对美国、俄罗斯以及我国第三代战斗机与F-22等新一代战斗机结构制造用钛情况进行了汇总阐述,特别是针对美国战斗机的钛合金设计选用思路及热制造成形工艺进行了分析讨论。     

Correction method of airfoil thickness effect in hinge moment calculation of a folding wing

The influences of airfoil thickness on the aerodynamic loading distribution and the hinge moments of folding wing aircraft are presented in this work. The traditional panel method shows deficiencies in the calculation of folding wing’s hinge moments. Thus, a thickness correction strategy for the aerodynamic model with CFD results is proposed, and an aeroelastic flight simulation platform is constructed based on the secondary development of ADAMS. Based on the platform, the developed aerodynamic model is verified, then the flight-folding process of the folding wing aircraft is simulated, and the influences of airfoil thickness on the results are investigated. Results show that the developed aerodynamic model can effectively describe the thickness effect of the folding wing. Airfoil thickness, which cannot be considered by the panel method, has a great influence on the hinge moments during the folding process, and the thickness correction has great significance in the calculation of folding wing’s hinge moments.     

基于CPN的飞机驾驶操纵过程建模及工效分析

驾驶舱人机界面的设计直接关系到飞行员在飞行任务中的操纵表现和飞行安全.分析了飞机驾驶操纵过程中的人机交互特性,基于着色Petri网构建了飞机操纵过程模型并给出了模型的公理化定义.提出了任务可达性,飞行员认知负荷和基于熵值的操纵程序复杂性评估方法,能够实现在驾驶舱设计初期对飞行员认知负荷与操纵过程的分析.结合某型飞机的起飞中断过程给出了操纵过程建模与工效分析实例,表明模型与方法的有效性.     

基于EGView的SR20飞机的发动机爆震分析

基于EGView软件对SR20飞机出现的多起发动机CHT异常升高故障进行了分析，结果表明出现了早燃引发的爆震，进一步对爆震发生的几率以及如何减小爆震的强度和持续时间进行了研究，并就该机型在运行中减少爆震的发生提出了建议。     

一种基于模式寻优的舰载机实时回收方法

为了解决舰载机的回收决策问题，提出一种基于模式寻优的舰载机实时回收方法。通过对典型回收模式的计算分析，寻求最佳的回收模式，解决舰载机回收过程中通用因素带来的回收决策问题。在此基础上，提出一种考虑优先级的时间域区间集算法，解决舰载机回收过程中随机因素带来的回收决策问题，即在既定的回收群体下，寻求最佳的回收序列。仿真结果表明，基于模式寻优的舰载机实时回收方法能够处理复杂多变的回收限制因素，得到合理可行的回收决策方案。