Space policy for late comer countries: A case study of South Korea

Korea’s space development program was created almost 40 years behind those of the advanced countries but it has nevertheless made remarkable progress. Korean space development has been focused on technology catch-up, where commercialization and growth of industrial competitiveness are important rationales. However, the program has several problems, including: lack of a space equipment manufacturing industry, total system companies in the space manufacturing industry and communication between industry and researchers, and much concentration of projects and initiatives in the Korean Aerospace Research Institute (KARI). This study analyzes the problem by comparing space agencies and programs in Korea and other countries, particularly Japan and the USA. It is shown that the role of a national laboratory is critical in space industry development and argued that KARI should make greater efforts to promote the Korean space industry by encouraging technology transfer, sharing equipment and communication between companies. For successful space development, the main organization – usually the national research institute – should change its role from a research-only laboratory to manager and supporter of space development and industry. Such a move would invigorate Korea’s space industry and allow it to catch up with countries with a similar environment.     

Image restoration of the asymmetric point spread function of a high-resolution remote sensing satellite with time-delayed integration

The calibration and validation team of the Korea Aerospace Research Institute has calibrated and validated the image data of the KOMPSAT-2 since the launch of KOMPSAT-2 on July 28, 2006. The asymmetric phenomenon of the point spread function of the KOMPSAT-2 image data is evident in both the along and the across direction, most likely because KOMPSAT-2 has a 1 m ground sample distance high-resolution camera with time-delayed integration. Furthermore, because KOMPSAT-2 is in space, the KOMPSAT-2 image data has been corrected with good results by means of modulation transfer function compensation.     

ARTEMIS Mission Design

The ARTEMIS mission takes two of the five THEMIS spacecraft beyond their prime mission objectives and reuses them to study the Moon and the lunar space environment. Although the spacecraft and fuel resources were tailored to space observations from Earth orbit, sufficient fuel margins, spacecraft capability, and operational flexibility were present that with a circuitous, ballistic, constrained-thrust trajectory, new scientific information could be gleaned from the instruments near the Moon and in lunar orbit. We discuss the challenges of ARTEMIS trajectory design and describe its current implementation to address both heliophysics and planetary science objectives. In particular, we explain the challenges imposed by the constraints of the orbiting hardware and describe the trajectory solutions found in prolonged ballistic flight paths that include multiple lunar approaches, lunar flybys, low-energy trajectory segments, lunar Lissajous orbits, and low-lunar-periapse orbits. We conclude with a discussion of the risks that we took to enable the development and implementation of ARTEMIS.     

Strapdown INS error model for multiposition alignment

The relationship between quaternion errors and tilt angles from true navigation frame to analytic platform frame is newly derived for strapdown inertial navigation system (SDINS). Using the relationship it is shown that the quaternion error model for attitude and velocity is equivalent to the conventional perturbation error model. Based upon the equivalency, the quaternion errors during a multiposition alignment are determined and analyzed. Furthermore, it is shown that the heading rotation of 180 deg achieves the minimal quaternion error for 2-position ground alignment     

Gain-scheduled state feedback control design technique for flightvehicles

For multi-input, multi-output (MIMO) nonlinearly parameter dependent linear parameter-varying (LPV) systems with multiple parameters, a design method of gain-scheduled state feedback control using a minimum sensitivity eigenvalue assignment of the frozen parameter closed-loop system with quadratic stability checks is proposed. The proposed design method is applied to the bank-to-turn (BTT) control of a flight vehicle, and the nonlinear 6 degree of freedom (DOF) simulations are performed to show the usefulness as a gain-scheduled state feedback control scheme     

Decentralized formation pose estimation for spacecraft swarms

For spacecraft swarms, the multi-agent localization algorithm must scale well with the number of spacecraft and adapt to time-varying communication and relative sensing networks. In this paper, we present a decentralized, scalable algorithm for swarm localization, called the Decentralized Pose Estimation (DPE) algorithm. The DPE considers both communication and relative sensing graphs and defines an observable local formation. Each spacecraft jointly localizes its local subset of spacecraft using direct and communicated measurements. Since the algorithm is local, the algorithm complexity does not grow with the number of spacecraft in the swarm. As part of the DPE, we present the Swarm Reference Frame Estimation (SRFE) algorithm, a distributed consensus algorithm to co-estimate a common Local-Vertical, Local-Horizontal (LVLH) frame. The DPE combined with the SRFE provides a scalable, fully-decentralized navigation solution that can be used for swarm control and motion planning. Numerical simulations and experiments using Caltech’s robotic spacecraft simulators are presented to validate the effectiveness and scalability of the DPE algorithm.     

Process of establishing design requirements and selecting alternative configurations for conceptual design of a VLA

In this study, a process for establishing design requirements and selecting alternative con-figurations for the conceptual phase of aircraft design has been proposed. The proposed process uses system-engineering-based requirement-analysis techniques such as objective tree, analytic hier-archy process, and quality function deployment to establish logical and quantitative standards. Moreover, in order to perform a logical selection of alternative aircraft configurations, it uses advanced decision-making methods such as morphological matrix and technique for order prefer-ence by similarity to the ideal solution. In addition, a preliminary sizing tool has been developed to check the feasibility of the established performance requirements and to evaluate the flight perfor-mance of the selected configurations. The present process has been applied for a two-seater very light aircraft (VLA), resulting in a set of tentative design requirements and two families of VLA configurations: a high-wing configuration and a low-wing configuration. The resulting set of design requirements consists of three categories: customer requirements, certification requirements, and performance requirements. The performance requirements include two mission requirements for the flight range and the endurance by reflecting the customer requirements. The flight performances of the two configuration families were evaluated using the sizing tool developed and the low-wing configuration with conventional tails was selected as the best baseline configuration for the VLA.     

Eigenstructure Assignment for Linear Systems

The use of feedback (full state, output, and constrained output) is considered as a means of shaping the transient response of linear time invariant systems. The underlying importance of the eigenstructure (eigenvalues/eigenvectors) is highlighted. Also, the important results and techniques are presented along with a brief literature review. An extensive flight control example is presented which should give direction to the application of eigenstructure assignment in diverse areas.     

CFAR for homogeneous part of high-resolution imagery

In high-resolution imaging, weak target pixel amplifiers may not be detected in the presence of clutter containing strong nonhomogeneities, when conventional approaches are used. The authors describe a constant false alarm rate (CFAR) approach that avoids the elimination of these significant target returns. The nonhomogeneous clutter as well as the weak target components are detected with this approach. The targets could then be discriminated from the homogeneities by discrimination techniques. It is shown how the lower amplitude components of the background noise and homogeneous clutter (which have Rayleigh statistics) can be detected in the presence of strong homogeneous clutter and targets. The average level of the homogeneous component is then determined using these lower-amplitude components. This CFAR approach avoids having a CFAR on the strong nonhomogeneities as well as the homogeneous component. The avoidance is what yields the ability to detect weak target pixel amplitudes     

Single-phase grid-connected PV system using three-arm rectifier-inverter

A grid-connected photovoltaic (PV) power supply system with on-line voltage regulation capability is presented. It employs the three-arm rectifier-inverter topology with PV modules connected directly on the dc-link. The common-arm is with line-frequency switching and synchronous to the input voltage, aiming for a lower switching loss and decoupling the control of rectifier and inverter portions. As a result, the rectifier and inverter portions can be controlled independently with the rectifier-arm and inverter-arm, respectively. For maximum power point tracking (MPFF) of the PV modules and balancing the power among utility, PV, and the load, a variable dc-link voltage is adopted and controlled by the rectifier-arm based on the MPPT control algorithm. The inverter-arm then regulates the load voltage with good regulation and low distortion. Due to large variation of the dc-link voltage, a feedforward plus feedback control technique with variable gain is developed to keep constant bandwidth of the current loop at any operation condition. Therefore, the performance of the rectifier and inverter portions can be ensured. A system containing a 2 kVA converter and a 1.2 kW PV module is set up, and some experimental results are provided for demonstrating the effectiveness of the proposed method.