四极－十六极分区式线型阱中汞离子囚禁仿真研究

利用SIMION软件建立了四极-十六极分区式线型离子阱系统模型，在此基础上仿真模拟了汞离子在四极阱和十六极阱中被囚禁时的第一稳定区，并分析了离子在不同阱中的运动特性。研究了汞离子云在分区式阱中的囚禁体积和速度分布，以及在不同囚禁区域之间的穿梭过程。模拟得出了稳态情况下分区式阱中不同囚禁区域的粒子数密度分布，验证了分区式离子阱中离子云被连续囚禁、穿梭时粒子数衰减和补偿。同时，根据以上数据分析讨论了汞离子囚禁时的多普勒效应，估算了基于此分区式离子阱的汞离子微波钟的性能水平。     

GNSS global real-time augmentation positioning: Real-time precise satellite clock estimation,prototype system construction and performance analysis

Lots of ambiguities in un-differenced (UD) model lead to lower calculation efficiency, which isn’t appropriate for the high-frequency real-time GNSS clock estimation, like 1 Hz. Mixed differenced model fusing UD pseudo-range and epoch-differenced (ED) phase observations has been introduced into real-time clock estimation. In this contribution, we extend the mixed differenced model for realizing multi-GNSS real-time clock high-frequency updating and a rigorous comparison and analysis on same conditions are performed to achieve the best real-time clock estimation performance taking the efficiency, accuracy, consistency and reliability into consideration. Based on the multi-GNSS real-time data streams provided by multi-GNSS Experiment (MGEX) and Wuhan University, GPS + BeiDou + Galileo global real-time augmentation positioning prototype system is designed and constructed, including real-time precise orbit determination, real-time precise clock estimation, real-time Precise Point Positioning (RT-PPP) and real-time Standard Point Positioning (RT-SPP). The statistical analysis of the 6 h-predicted real-time orbits shows that the root mean square (RMS) in radial direction is about 1–5 cm for GPS, Beidou MEO and Galileo satellites and about 10 cm for Beidou GEO and IGSO satellites. Using the mixed differenced estimation model, the prototype system can realize high-efficient real-time satellite absolute clock estimation with no constant clock-bias and can be used for high-frequency augmentation message updating (such as 1 Hz). The real-time augmentation message signal-in-space ranging error (SISRE), a comprehensive accuracy of orbit and clock and effecting the users’ actual positioning performance, is introduced to evaluate and analyze the performance of GPS + BeiDou + Galileo global real-time augmentation positioning system. The statistical analysis of real-time augmentation message SISRE is about 4–7 cm for GPS, whlile 10 cm for Beidou IGSO/MEO, Galileo and about 30 cm for BeiDou GEO satellites. The real-time positioning results prove that the GPS + BeiDou + Galileo RT-PPP comparing to GPS-only can effectively accelerate convergence time by about 60%, improve the positioning accuracy by about 30% and obtain averaged RMS 4 cm in horizontal and 6 cm in vertical; additionally RT-SPP accuracy in the prototype system can realize positioning accuracy with about averaged RMS 1 m in horizontal and 1.5–2 m in vertical, which are improved by 60% and 70% to SPP based on broadcast ephemeris, respectively.     

异地遥测对接可行性探究

针对现有飞行器测控系统遥测对接试验周期长、效率低的不足,提出一种异地遥测对接方法.通过构建异地遥测对接系统结构,得到异地遥测对接信号链路模型.基于系统时钟抖动的频率、相位和采样时间表达形式,对异地遥测对接链路中的信号进行了具体推导.在此基础上,从频率和相位2个方面,定量分析了系统时钟抖动对异地遥测对接信号相参性的影响.分析结果表明：对于Ka频段信号,当应答机端异地遥测对接系统的时钟短期频率稳定度优于1×10^-11时,异地遥测对接系统引入的频率抖动△f≤0.6 Hz,相位抖动△φ≤0.075 rad,可认为异地遥测对接信号的相参性不受影响,异地遥测对接可行.     

一种光学遥感成像系统优化设计新方法研究

针对空间光学高分辨率遥感器,既要实现轻小型化,又要获得高品质遥感图像的要求,文章提出一种空间光学遥感成像系统优化设计新方法;综合考虑成像链路各环节因素,采用全面的指标设计和合理的优化设计流程来改进空间光学遥感成像系统的总体指标和成像品质,并显著降低遥感器的研制难度.通过比较全链路优化设计方法和传统设计方法的仿真结果及其...     

超声复合研磨光学玻璃机理及表面特征

根据光学玻璃硬度高和脆性大的特点,从理论上分析了超声波研磨加工光学玻璃材料的去除机理,试验表明,超声加工工具振动振幅为0.03～0.1mm,频率为16～ 25 kHz条件下,超声波的超精密加工光学玻璃比不加超声振动加工材料去除率高1.5倍左右,表面质量好,粗糙度值降低100％左右.     

镱原子二级冷却的实验研究

介绍了镱原子光钟中的二级冷却实验过程。在一级冷却的基础上,将冷镱原子成功转移至555.8nm磁光阱中。用时间飞行法测量174Yb超冷原子的温度约为100μK,171Yb超冷原子的温度约为30μK。     

CPT原子钟系统光源温度控制设计与实现

介绍了半导体激光器波长影响机理,针对相干布局数囚禁（CPT）原子钟系统光源,设计并制作了通过半导体激光器的温度稳定的电路。实验结果表明,采用此电路的激光器,其温度稳定度约为0.02℃,相应波长稳定度可达0.001 2 nm。     

氢原子钟的空间应用前景

氢原子钟仍是目前可移动的和实用的最高稳定度的时频标准。作为参考,10^-16稳定度的氢原子钟很适合空间科学测量。文章介绍了氢原子钟的特点及其在空间科学实验中的潜在应用前景。     

Feasibility assessment of optical technologies for reliable high capacity feeder links

Space telecom scenarios like data relay satellite and broadband/broadcast service providers require reliable feeder links with high bandwidth/data rate for the communication between ground station and satellite. Free space optical communication (FSOC) is an attractive alternative to microwave links, improving performance by offering abundant bandwidth at small apertures of the optical terminals. At the same time Near-Earth communication by FSOC avoids interference with other services and is free of regulatory issues. The drawback however is the impairment by the laser propagation through the atmosphere at optical wavelengths. Also to be considered are questions of eye safety for ground personnel and aviation. In this paper we assess the user requirements for typical space telecom scenarios and compare these requirements with solutions using optical data links through the atmosphere. We suggest a site diversity scheme with a number of ground stations and a switching scheme using two optical terminals on-board the satellite. Considering the technology trade-offs between four different optical wavelengths we recommend the future use of 1.5 µm laser technology and calculate a link budget for an atmospheric condition of light haze on the optical path. By comparing link budgets we show an outlook to the future potential use of 10 µm laser technology.     

远距离测试发控系统中数字光纤通信系统的接口设计及实现

远距离分布式计算机网络测试发控系统是当今国际宇航事业发展的方向。数据通信系统能否畅通、准确、实时、可靠是实现远距离测试发控的关键。本文列举了光纤通信的优点，分析了通信中常用纠错编码的优劣，提出一种既符合测试发控系统的特点又适合光纤通信要求的新的纠错编码方案，并设计出以该纠错编码为核心的数字光纤通信接口，满足了一个特定的远距离测试发控系统对数字通信的要求。