模型的转捩流动计算分析简

 为了在黏性流动数值模拟中实现边界层转捩的自动预测,将γ-Re_θt转捩模型引入到三维非结构混合网格的雷诺平均Navier-Stokes方程求解程序（HUNS3D）。该转捩模型由两个依赖当地变量定义的关于间歇因子和当地化转捩起始动量厚度雷诺数的输运方程组成,其数值求解算法与流场求解程序中湍流模型的求解方法相同。为了考察和验证HUNS3D程序中γ-Re_θt转捩模型对航空工程中的常见附面层自由转捩问题的预测精度,对低速平板流动、Aerospatial-A翼型、NLR 7301超临界翼型和NASA Trap wing 高升力构型等典型外形的自由转捩流动进行了计算,并将计算结果与相关试验结果进行了对比分析。算例结果表明：γ-Re_θt转捩模型对于转捩位置具有很好的敏感性,能比较准确地预测自然转捩和分离转捩,可以有效提高HUNS3D程序对实际流动的模拟能力和预测精度。     

A strategic flight conflict avoidance approach based on a memetic algorithm

Conflict avoidance （CA） plays a crucial role in guaranteeing the airspace safety. The cur- rent approaches, mostly focusing on a short-term situation which eliminates conflicts via local adjust- ment, cannot provide a global solution. Recently, long-term conflict avoidance approaches, which are proposed to provide solutions via strategically planning traffic flow from a global view, have attracted more attentions. With consideration of the situation in China, there are thousands of flights per day and the air route network is large and complex, which makes the long-term problem to be a large-scale combinatorial optimization problem with complex constraints. To minimize the risk of premature convergence being faced by current approaches and obtain higher quality solutions, in this work, we present an effective strategic framework based on a memetic algorithm （MA）, which can markedly improve search capability via a combination of population-based global search and local improve- ments made by individuals. In addition, a specially designed local search operator and an adaptive local search frequency strategy are proposed to improve the solution quality. Furthermore, a fast genetic algorithm （GA） is presented as the global optimization method. Empirical studies using real traffic data of the Chinese air route network and daily flight plans show that our approach outper- formed the existing approaches including the GA .based approach and the cooperative coevolution based approach as well as some well-known memetic algorithm based approaches.     

高超声速风洞多天平测力试验技术研究

在同一次试验中通过安装多台天平测量多个部件气动力,可以更加详细地了解飞行器的气动特性,并可以降低试验成本、提高试验效率。多天平测力技术在亚跨超声速风洞中应用已经非常成熟。但是,在高超声速风洞中,由于模型尺寸小、来流温度高,多天平的布局比较困难,所以目前国内在高超声速风洞中进行的多天平测力试验相对较少。为满足型号研制的需要,在 CARDC 超高速所的Φ1m 高超声速风洞上开展了多天平测力试验技术研究。选取某飞行器的3个控制舵为研究对象。针对试验模型径向尺寸小,而轴向尺寸相对较大的特点,确定采用铰链力矩天平轴线与测量舵转轴互相垂直的“纵轴式”布局方式;采用合理的小型化六分量天平结构形式,升降舵天平测量元件的长、宽、高尺寸为20mm×20mm×25mm;为更加真实地模拟天平的工作状态,设计了专用的加载头,并采用单元加载和组合加载相结合的方法进行校准,校准结果表明,天平主要分量的静校准度均在0．7％以内;在采取温度补偿措施之后,零点漂移明显减小;采用了天平-舵偏角变换装置一体化设计,有效提高了定位和安装精度。在Φ1m 高超声速风洞上开展的 Ma＝5条件下的风洞试验结果表明,采用的多天平测力试验技术是可行的,可以应用到高超声速风洞测力试验中。     

用热流探针测量激波速度

激波速度测量是激波管和激波风洞运行状态的一个重要参数,压电传感器或光学方法测速系统成本高,而传统电离探针在激波马赫数较低、波后温度达不到空气电离程度的情况下无法满足实验要求。提出了一种使用同轴热电偶作为测速探针来测激波速度的方法,弥补了电离探针在激波马赫数较低时的不足。介绍了同轴热电偶探针测速原理,并设计了测量激波速度的系统电路。通过信号放大电路锁定激波冲激信号,触发脉冲信号发生电路,实现了一种单通道、多测点的激波风洞测速系统。分别开展以温度与热流为触发信号的风洞实验,结果表明只有使用热流信号才能满足激波测速的时间要求。     

A closed-form solution for moving source localization using LBI changing rate of phase difference only

Due to the deficiencies in the conventional multiple-receiver localization systems based on direction of arrival(DOA) such as system complexity of interferometer or array and amplitude/phase unbalance between multiple receiving channels and constraint on antenna configuration,a new radiated source localization method using the changing rate of phase difference(CRPD)measured by a long baseline interferometer(LBI) only is studied. To solve the strictly nonlinear problem, a two-stage closed-form solution is proposed. In the first stage, the DOA and its changing rate are estimated from the CRPD of each observer by the pseudolinear least square(PLS) method,and then in the second stage, the source position and velocity are found by another PLS minimization. The bias of the algorithm caused by the correlation between the measurement matrix and the noise in the second stage is analyzed. To reduce this bias, an instrumental variable(IV) method is derived. A weighted IV estimator is given in order to reduce the estimation variance. The proposed method does not need any initial guess and the computation is small. The Cramer–Rao lower bound(CRLB) and mean square error(MSE) are also analyzed. Simulation results show that the proposed method can be close to the CRLB with moderate Gaussian measurement noise.     

Gray bootstrap method for estimating frequency-varying random vibration signals with small samples

During environment testing, the estimation of random vibration signals （RVS） is an important technique for the airborne platform safety and reliability. However, the available meth- ods including extreme value envelope method （EVEM）, statistical tolerances method （STM） and improved statistical tolerance method （ISTM） require large samples and typical probability distri- bution. Moreover, the frequency-varying characteristic of RVS is usually not taken into account. Gray bootstrap method （GBM） is proposed to solve the problem of estimating frequency-varying RVS with small samples. Firstly, the estimated indexes are obtained including the estimated inter- val, the estimated uncertainty, the estimated value, the estimated error and estimated reliability. In addition, GBM is applied to estimating the single flight testing of certain aircraft. At last, in order to evaluate the estimated performance, GBM is compared with bootstrap method （BM） and gray method （GM） in testing analysis. The result shows that GBM has superiority for estimating dynamic signals with small samples and estimated reliability is proved to be 100% at the given confidence level.     

Accuracy enhancement of the spherical actuator with a two-level geometric calibration method

This paper presents a two-level geometric calibration method for the permanent magnet （PM） spherical actuator to improve its motion control accuracy. The proposed actuator is com- posed of a stator with circumferential coils and a rotor with multiple PM poles. Due to the assembly and fabrication errors, the real geometric parameters of the actuator will deviate from their design values. Hence, the identification of such errors is critical for the motion control tasks. A two-level geometric calibration approach is proposed to identify such errors. In the first level, the calibration model is formulated based on the differential form of the kinematic equation, which is to identify the geometric errors in the spherical joint. In the second level, the calibration model is formulated based on the differential form of torque formula, which is to calibrate the geometric parameters of the magnetization axes of PM poles and coils axes. To demonstrate the robustness and availability of the calibration algorithm, simulations are conducted. The results have shown that the proposed two-level calibration method can effectively compensate the geometric parameter errors and improve the positioning accuracy of the spherical actuator.     

Multi-objective optimization of aircraft design for emission and cost reductions

Pollutant gases emitted from the civil jet are doing more and more harm to the environ- ment with the rapid development of the global commercial aviation transport. Low environmental impact has become a new requirement for aircraft design. In this paper, estimation method for emis- sion in aircraft conceptual design stage is improved based on the International Civil Aviation Orga- nization （ICAO） aircraft engine emissions databank and the polynomial curve fitting methods. The greenhouse gas emission （CO2 equivalent） per seat per kilometer is proposed to measure the emis- sions. An approximate sensitive analysis and a multi-objective optimization of aircraft design for tradeoff between greenhouse effect and direct operating cost （DOC） are performed with five geom- etry variables of wing configuration and two flight operational parameters. The results indicate that reducing the cruise altitude and Mach number may result in a decrease of the greenhouse effect but an increase of DOC. And the two flight operational parameters have more effects on the emissions than the wing configuration. The Pareto-optimal front shows that a decrease of 29.8% in DOC is attained at the expense of an increase of 10.8% in greenhouse gases.     

Application in prestiction friction compensation for angular velocity loop of inertially stabilized platforms

To overcome the influence of the nonlinear friction on the gimbaled servo-system of an inertial stabilized platforms(ISPs) with DC motor direct-drive, the methods of modeling and compensation of the nonlinear friction are proposed. Firstly, the inapplicability of LuGre model when trying to interpret the backward angular displacement in the prestiction regime is observed experimentally and the reason is deduced theoretically. Then, based on the dynamic model of direct-drive ISPs, a modified LuGre model is proposed to describe the characteristic of the friction in the prestiction regime. Furthermore, the state switch condition of the three friction regimes including presliding, gross sliding and prestiction is presented. Finally, a composite compensation controller including a nonlinear friction observer and a feedforward compensator based on the novel LuGre model is designed to restrain the nonlinear friction and to improve the control precision. Experimental results indicate that compared with those of the conventional proportion–integration–differentiation(PID) control method and the PID plus LuGre model-based friction compensation method, the dwell-time has decreased from 0.2 s to almost 0 s, the position error decreased to 86.7%and the peak-to-peak value of position error decreased to 80% after the novel compensation controller is added. It concludes that the composite compensation controller can greatly improve the control precision of the dynamic sealed ISPs.