高压捕获翼构型的跨流域气动特性

高压捕获翼(HCW)构型是一种满足高速飞行器高容积、高升力、高升阻比的设计需求的新型气动布局.最近研究表明,HCW构型能够提高飞行器在连续流区的升力和升阻比,缓解飞行器设计中高容积率与高升阻比间的矛盾.为探究该气动布局在过渡流域(70～100 km)的气动特性,以一种楔—平板组合的高压捕获翼原理性构型作为模型,采用直接模拟Monte Carlo(DSMC)方法,详细分析了该模型在典型高超声速条件(马赫数20)下的流场结构和壁面气动力/热分布.结果表明,随着飞行高度增加,稀薄效应增强,机体压缩产生的激波厚度增加,激波边缘逐渐模糊,机体与捕获翼之间的开放通道内出现压力干扰.同时,高压捕获翼表面的摩擦系数迅速上升,气动摩擦成为制约捕获翼构型升阻比的重要因素.针对这一问题,分析了捕获翼材料表面的适应系数对飞行器的气动力/热的影响,结果表明,降低适应系数可以显著减小壁面摩擦和热流量,可通过选用适应系数较小的表面材料进一步提高该类飞行器气动性能.     

Scientific objectives and payloads of Tianwen-1, China’s first Mars exploration mission

This paper describes the scientific objectives and payloads of Tianwen-1, China’s first exploration mission to Mars. An orbiter, carrying a lander and a rover, lifted-off in July 2020 for a journey to Mars where it should arrive in February 2021. A suite of 13 scientific payloads, for in-situ and remote sensing, autonomously commanded by integrated payload controllers and mounted on the orbiter and the rover will study the magnetosphere and ionosphere of Mars and the relation with the solar wind, the atmosphere, surface and subsurface of the planet, looking at the topography, composition and structure and in particular for subsurface ice. The mission will also investigate Mars climate history. It is expected that Tianwen-1 will contribute significantly to advance our scientific knowledge of Mars.     

非线性能量阱对飞轮振动抑制效果的实验研究

利用薄片金属梁作为非线性刚度元件，构建一种非线性能量阱。为了验证非线性能量阱对飞轮振动特性的抑制效果，搭建地面飞轮测试系统。分别采用力锤敲击和飞轮以恒定转速运行的方法施加不同载荷，对安装非线性能量阱前后测试系统各典型位置的振动响应进行对比研究。利用实测数据，采用傅里叶变换方法将动态响应信息分别在时间域和频率域内展开。研究表明：力锤敲击产生的冲击载荷和飞轮以恒定转速运行产生的稳态载荷均可以激发非线性能量阱定向能量传输；受非线性能量阱的影响，柔性支架设备安装面和飞轮安装面振动响应得到有效抑制。但是，由于非线性能量阱阻尼和吸振子质量较小，不同程度削弱了其振动抑制效果。     

Early analysis of precise orbit and clock offset determination for the satellites of the global BeiDou-3 system

Eight new-generation BeiDou satellites (BeiDou-3) have been launched into Medium Earth Orbit (MEO), allowing for global coverage since March 2018, and they are equipped with new hydrogen atomic clocks and updated rubidium clocks. Firstly, we analyzed the signals for the carrier-to-noise-density ratio (C/N0) and pseudorange multipath (MP) by using international GNSS (Global Navigation Satellite System) Monitoring and Assessment System (iGMAS) station data, and found that B1C has a lower C/N0, and B2a has the same level of C/N0 as the B1I and B3I signals. For pseudorange multipath, compared with the BeiDou-2 satellites, the obvious systematic variation of MP scatters related to the elevation angle is greatly improved for the BeiDou-3 and BeiDou-3e satellites signals. For the signals of the BeiDou-3 satellites, the order of the Root Mean Square (RMS) values of multipath and noise is B3I?<?B1I?<?B2a?<?B1C. Then, the comparison of the precise orbit determination and clock offset determination for the BeiDou-2, BeiDou-3, and BeiDou-3 experimental (BeiDou-3e) satellites was done by using 10 stations from iGMAS. The 3D precision of the 24?h orbit overlap is 24.55, 25.61, and 23.35?cm for the BeiDou-3, BeiDou-3e, and BeiDou-2 satellites, respectively. BeiDou-3 satellite has a comparable precision to that of the BeiDou-2 satellite. For the precision of clock offset estimation, the Standard Deviation (STD) of the BeiDou-3 MEO satellite is 0.350?ns, which is an improvement of 0.042?ns over that of the BeiDou-2 MEO satellite. The stabilities of the BeiDou-3 and BeiDou-3e onboard clocks are better than those of BeiDou-2 by factors of 2.84 and 1.61 at an averaging time of 1000 and 10,000?s, respectively.     

在片校准标准件基底边界条件影响

通过分析国内外校准标准件物理边界条件，研究不同校准基底的物理边界条件对共面波导（CPW）传输线特性和校准准确度的影响。研制了W波段砷化镓衬底的多线TRL在片校准标准件，将在片校准标准件分别放置在金属卡盘、玻璃片、吸波材料三种校准基底上。用三种不同校准基底的校准标准件对试验装置校准后，分别提取了CPW传输线的衰减常数、相对介电常数和特征阻抗，并对商用校准标准件104-783A的短路标准和传输线标准进行了测试，验证了结果的合理性。     

RTK model and positioning performance analysis using Galileo four-frequency observations

This paper proposes a real-time kinematic (RTK) model that uses one common reference satellite for the Galileo system with four frequency observations. In the proposed model, the double-differenced (DD) pseudorange and carrier phase biases among the different frequencies are estimated as unknown parameters to recover the integer features of the DD ambiguities among the different frequencies for ambiguity resolution and precise positioning. Analysis results show that the E5a, E5b, and E5 frequencies have virtually the same performance in terms of the positioning accuracy, observation residuals, and ratio values of ambiguity resolution. However, the E1 frequency performs worse than the E5a, E5b, and E5 frequencies. The RTK results for the combination of multiple frequencies are much better than those for a single-frequency observation, the coordinates’ standard deviation is improved about 20–30%, and the ambiguity fix time is improved about 10%.     

基于双滤波器的高精度目标跟踪估计方法

针对连续推力的合作航天器，采用双重无迹卡尔曼滤波(DUKF)算法估计其状态和加速度。通过状态滤波器和参数滤波器的配合，提升滤波精度，完成运动状态和参数的估计，从而实现合作目标的运动轨迹跟踪。与合作航天器相比，非合作航天器存在大小未知、发生时刻未知的机动，无法获得加速度，且信息获取和运动状态的估计难度大。针对非合作航天器，基于简化的相对运动方程，结合天基平台获得目标的观测信息，采用两个扩展卡尔曼滤波(EKF)及基于半正焦弦的机动检测策略实现多未知脉冲机动的运动状态的估计。仿真结果表明：相比于无迹卡尔曼滤波（UKF），DUKF在对合作航天器的状态和加速度估计方面具有更快的收敛速度和更高的滤波精度；对于存在未知机动的非合作航天器，通过对比验证机动检测策略与滤波器切换策略相结合的方法的有效性，该方法能够检测到多次机动并且减少误判。     

基于位移和力值组合的静重式力标准机砝码加卸载控制方法研究

介绍了一种基于位移和力值组合的静重式力标准机砝码加卸载的控制方法，通过监测砝码的移动量和参考力传感器叠加系统的力值量，实时调整加卸载机构的加卸载速度，以实现对被检力传感器的平滑加卸载的目的。该方法有效解决了吊挂在加载过程中产生较大摆动，影响力标准机复现力值准确度的问题，同时也消除了力值过冲现象，避免了因逆程效应而导致的力传感器输出偏差。     

结合跳点引导的无人机随机搜索避撞决策方法

针对无人机在城市空域环境和密集交通流下的避撞决策问题，提出马尔科夫决策过程（MDP）和蒙特卡洛树搜索（MCTS）算法对该问题进行建模求解。蒙特卡洛树搜索算法在求解过程中为保证实时性而使其搜索深度受限，容易陷入局部最优，导致在含有静态障碍的场景中无法实现避撞的同时保证全局航迹最优。因此结合跳点搜索算法在全局规划上的优势，建立离散路径点引导无人机并改进奖励函数来权衡飞行路线，在进行动态避撞的同时实现对静态障碍的全局避撞。经过多个实验场景仿真，其结果表明改进后的算法均能在不同场景中获得更好的性能表现。特别是在凹形限飞区空域仿真模型中，改进后的算法相对于原始的蒙特卡洛树搜索算法，其冲突概率降低了36%并且飞行时间缩短47.8%。