基于6σ设计的复合推力高速直升机总体参数多目标优化

针对复合推力高速直升机总体设计阶段总体参数的选择问题,提出一种提高可靠性和鲁棒性的基于6σ设计的改进多目标遗传算法优化方法。采用叶素理论和数值积分的方法分析计算了复合推力高速直升机气动及飞行性能,并以此为基础建立了约束函数和初步目标函数模型;将6σ设计融入改进的多目标遗传算法中,构造最终目标函数;在给定有效载荷设计要求下,对复合推力高速直升机总体参数进行了多目标优化设计。该方法获得了所需的Pareto解,优化后的复合推力高速直升机飞行性能相对原机有了较大改善,算例结果表明该方法有效可行。     

A new dynamic pushback control method for reducing fuel-burn costs: Using predicted taxi-out time

Long departure-taxi-out time leads to significant airport surface congestion, fuel-burn costs, and excessive emissions of greenhouse gases. To reduce these undesirable effects, a Predicted taxi-out time-based Dynamic Pushback Control(PDPC) method is proposed. The implementation of this method requires two steps: first, the taxi-out times for aircraft are predicted by the leastsquares support-vector regression approach of which the parameters are optimized by an introduced improved Firefly algorithm. Then, a dynamic pushback control model equipped with a linear gate-hold penalty function is built, along with a proposed iterative taxiway queue-threshold optimization algorithm for solving the model. A case study with data obtained from Beijing International airport(PEK) is presented. The taxi-out time prediction model achieves predictive accuracy within 3 min and 5 min by 84.71% and 95.66%, respectively. The results of the proposed pushback method show that total operation cost and fuel-burn cost achieve a 14.0% and 21.1%reduction, respectively, as compared to the traditional K-control policy.(3) From the perspective of implementation, using PDPC policy can significantly reduce the queue length in taxiway and taxi-out time. The total operation cost and fuel-burn cost can be curtailed by 37.2% and 52.1%,respectively, as compared to the non-enforcement of any pushback control mechanism. These results show that the proposed pushback control model can reduce fuel-burn costs and airport surface congestion effectively.     

飞机动态推出控制策略仿真优化模型

机场离港运行的无序化造成滑行过程中的长时间排队等待及大量燃油浪费。为了减少燃油消耗和废气排放,在已有的动态推出控制策略基础上提出了阶梯函数控制策略(Step function,SPC)和非线性函数动态推出策略(Nonlinear function,NPC)的一般形式,以离港成本为目标,建立了基于停机位等待惩罚的动态推出控制模型,在不延误的前提下提出了一种基于网格参数优化的蒙特卡洛仿真优化算法。通过北京首都机场实际运行数据对推出过程进行仿真计算,并与无控制策略以及传统N-control策略的最优可达解进行仿真对比,结果表明:在不延误的前提下,提出的推出策略可以更加有效地降低平均滑行道滑行时间,NPC策略的离港运行成本和燃油成本可降低45.52%和54.23%,SPC虽然成本节省劣于NPC策略,但是其简单的操作方式可以为离港推出调度方式的改进提供决策支持。     

弯扭复合大负载下电动舵机设计及性能试验研究

针对弯扭复合大负载工况下电动舵机快速性与稳定性匹配的问题,在分析有限空间质量约束下舵机设计要求的基础上,采用基于核心部件与系统仿真及试验验证相结合的手段,提出了一种高刚度高功率密度的抗弯扭复合大负载电动舵机设计方法。详细阐述了高功率密度伺服电机和高刚度传动机构的设计过程,并研制了工程样机。试验结果表明:该电动舵机伺服刚度与功率密度得到显著提升,在复合大负载工况下能够实现高动态高可靠稳定运行。     

多工况载荷下航空发动机支架拓扑优化设计

将基于变密度法的拓扑优化技术引入到航空发动机外部支撑结构(例如附件支架)设计中,以多工况下的总柔度为目标函数,以体积为约束函数对某发动机支架进行基于拓扑优化的结构设计。根据发动机机匣与附件的相对位置关系建立支架初始模型,开展发动机外部支架结构受力分析研究,建立了基于多工况载荷下拓扑优化和考虑强度影响的尺寸优化相结合的发动机外部支撑结构设计方法,并对最终支架结构进行强度、振动、外廓性校核评估。结果表明：最终模型最大应力出现在工况3情况下,最大主应力为345 MPa低于材料疲劳极限;支架的第1阶固有频率在发动机最高转速频率的125倍以上。采用该方法对某发动机外部支撑结构进行拓扑优化设计,在满足强度、振动和外廓要求的前提下,最终模型质量仅为初始模型的73%。基于多工况的优化结果更符合发动机实际工作需求,该方法研究具有工程应用前景。     

Far-UVC light as a new tool to reduce microbial burden during spacecraft assembly

This work aims to investigate far-UVC light at 222 nm as a new microbial reduction tool for planetary protection purposes which could potentially be integrated into the spacecraft assembly process. The major advantage of far-UVC (222 nm) compared to traditional germicidal UVC (254 nm) is the potential for application throughout the spacecraft assembly process in the presence of humans without adverse health effects due to the limited penetration of far-UVC light into biological materials. Testing the efficacy of 222-nm light at inactivating hardy bacterial cells and spores isolated from spacecraft and associated surfaces is a necessary step to evaluate this technology. We assessed survival of Bacillus pumilus SAFR-032 and Acinetobacter radioresistens 50v1 exposed to 222-nm light on proxy spacecraft surfaces simulated by drying the bacteria on aluminum coupons. The survival fraction of both bacteria followed a single stage decay function up to 60 mJ/cm², revealing similar susceptibility of both species to 222-nm light, which was independent of the exposure rate. Irradiation with far-UVC light at 222 nm is an effective method to decontaminate the proxy spacecraft materials tested in this study.     

空间相机低频隔振系统及试验验证

随着遥感卫星分辨率的提高。星上微振动对空间相机的影响越来越显著。在相机与卫星平台之间安装隔振装置,将飞轮、扫描机构等扰振源产生的振动与相机隔离开来是一种改善其工作环境的有效方法。文章介绍了针对中巴地球资源卫星研制的相机被动隔振系统,以及在地面结构星上进行的联合隔振性能测试。测试结果表明。传递至相机的两个主要扰振频率分量...     

基于低频磁信标的全天时自主定位方法

由于以GPS、北斗为代表的GNSS信号容易受到天气和位置的影响,单纯使用GNSS在某些条件下会有较大的定位误差,甚至无法提供定位服务。针对这种情况研究了基于低频磁信标的自主定位方法,分析了电磁学中的毕奥-萨伐尔定律等原理,建立了基于低频磁信标定位的系统模型,给出了分离式双信标定位方法。通过实验分析了信标安装的误差特性,最后通过仿真和实际实验验证了该定位方法的有效性,对于室内机器人导航、地下生物探索、水下跟踪定位等单独采用GNSS定位影响较大的场景下的自主定位与导航具有重要的工程应用价值。