不推飞机校正无线电罗差方法研究与实践

在研究转角天线对固定式环形天线作用的基础上,利用模拟信号源和"准补偿"理论给出了一种不推飞机校正无线电罗差的方法,并分析了测量误差.实践表明,该方法科学易行.     

Ion engine grids: Function,main parameters,issues, configurations,geometries, materials and fabrication methods

Ion optics are crucial components of ion thrusters and the study of the different ion extraction solutions used since the beginning of the electric propulsion era is essential to understand the evolution of ion engines. This work describes ion engine grids' main functions, parameters and issues related to thermal expansion and sputter erosion, and then introduces a review of ion optics used for significant launched and tested ion thrusters since 1970. Configurations, geometries, materials and fabrication methods are analyzed to understand when typical ion thrusters use two or three grids, what are the thicknesses and aperture sizes of the screen, accelerator and decelerator grids, why molybdenum and carbon-based materials such as pyrolytic graphite and carbon–carbon are the best available options for ion optics and what is the manufacturing method for each material.     

基于Web的邮件发送技术

以组件技术为基础 ,从软件工程的角度介绍了运用ASP技术 ,在Web服务器IIS4 0上 ,通过CDOforNTS组件 ,以网页的形式发送邮件的方法 ,给出了CDO与ADO相结合实现邮件批量发送的例子。     

ASW-RTS:一种软件性能数据在线检测方法

在软件健康管理系统中,需要对相关被测构件的性能进行在线检测,从而确定构件的健康状态。针对被测构件的性能衰退检测问题,在AR(p)模型基础上,结合时间序列滚动式算法的准确性,提出了一种具有自适性策略的ASWRTS算法,用于对被测构件革新异常类性能数据的在线检测,提高检测的准确度,并基于该算法设计了构件性能异常数据的在线检测过程。实验结果表明,该算法将检测精度提高了50%左右,能够有效在线检测构件的性能衰退,说明了该算法的正确性和有效性。     

虑及多转速的核心机转子高速动平衡试验

为满足航空发动机整机动平衡对转子不平衡振动精稳抑制的需求，采用虑及多转速状态的转子高速动平衡优化配平方 法，开展了核心机转子动平衡试验。以核心机转子系统为对象，研究在高压压气机转子第4、9级盘上配重抑制高压涡轮振动的可 行性。综合考虑核心机转子在多转速下的振动状态，以残余振动平方和及残余振动最大值为目标函数，采用优化算法对配平方案 进行优化，制定了核心机转子高速动平衡方案。在核心机转子系统试验台上分别进行了单平面-单转速、单平面-多转速、双平面- 单转速以及双平面-多转速动平衡的试验。结果表明：采用虑及多转速状态的转子高速动平衡优化配平方法能使因不平衡引起的 核心机转子振动在工作转速区间内均有所减小。     

某型号空气压缩机的常见故障及排除方法

目的正确分析、准确判断空气压缩机的常见故障。方法通过观察、测量、试验等方法判断故障部位和类型。结果故障主要是活塞环严重磨损、活门密封性降低、偏心轮扭断、润滑油路堵塞和活门严重故障等。结论迅速快捷地排除空压机故障。     

组织管理的系统思维

系统是由相互关联的元素组成的整体。系统思维(Systems Thinking)是一种以整体观点观察事物的方式。基于工程原理和法则的定量化模型方法在管理领域的应用,因为人的动机和行为的复杂性而受到了限制。综合集成是具有系统思维的管理者对现实问题的不同诠释,是认识和解决管理复杂性问题的有效方法。     

Experimental investigation and correlation development of jet impingement heat transfer with two rows of aligned jet holes on an internal surface of a wing leading edge

Extensive experimental studies on the heat transfer characteristics of two rows of aligned jet holes impinging on a concave surface in a wing leading edge were conducted, where50000 Rej 90000, 1.74 H/d 27.5, 66° a 90°, and 13.2 r/d 42.03. The finding was that the heat transfer performance at the jet-impingement stagnation point with two rows of aligned jet holes was the same as that with a single row of jet holes or the middle row of three-row configurations when the circumferential angle of the two jet holes was larger than 30°. The attenuation coefficient distribution of the jet impingement heat transfer in the chordwise direction was so complicated that two zones were divided for a better analysis. It indicated that: the attenuation coefficient curve in the jet impingement zone exhibited an approximate upside-down bell shape with double peaks and a single valley; the attenuation coefficient curve in the non-jet impingement zone was like a half-bell shape, which was similar to that with three rows of aligned jet holes; the factors,including Rej, H/d and r/d, affected the attenuation coefficient value at the valley significantly.When r/d was increased from 30.75 to 42.03, the attenuation rates of attenuation coefficient increased only by 1.8%. Consequently, experimental data-based correlation equations of the Nusselt number for the heat transfer at the jet-impingement stagnation point and the distributionof the attenuation coefficient in the chordwise direction were acquired, which play an important role in designing the wing leading edge anti-icing system with two rows of aligned jet holes.