Space-radiation-induced photon luminescence of the Moon

We report on the results of a continuing study of the photon luminescence of the Moon induced by Galactic Cosmic Rays (GCRs) and space radiation from the Sun, using the Monte Carlo program FLUKA. Understanding the space radiation environment is critical to future exploration of the Moon, and this includes photons. The model of the lunar surface is taken to be the chemical composition of soils found at various landing sites during the Apollo and Luna programs, averaged over all such sites to define a generic regolith for the present analysis. This surface model then becomes the target that is bombarded by Galactic Cosmic Rays (GCRs) and Solar Energetic Particles (SEPs) or Solar Particle Events (SPEs) above 1 keV in FLUKA to determine the photon fluence albedo produced by the Moon’s surface when there is no sunlight and Earthshine. The result is to be distinguished from the gamma-ray spectrum produced by the radioactive decay of radiogenic constituents lying in the surface and interior of the Moon. From the photon fluence we derive the spectrum which can be utilized to examine existing lunar spectral data and to aid future orbiting instrumentation in the measurement of various components of the space-radiation-induced photon luminescence present on the Moon.     

基于引力场不对称性的三体系统轨道自主导航

以月球背面的中继通信为背景,提出了基于三体系统引力场不对称特性的星–星测距自主定轨方案。该方案以环月极轨卫星和地–月L2点Halo轨道卫星组成中继通信网,以实现对月球两极和背面的覆盖。通过采集极轨卫星与Halo轨道卫星的测距信息,结合卡尔曼滤波在日–地–月动力学模型下获得两颗卫星的绝对轨道。数值仿真结果表明:本文方法能将导航的位置精度和速度精度分别提高到百米和厘米/秒量级。该自主导航方法还可以扩展到不规则引力场小天体附近星群运动的自主导航。     

月球粒子辐射环境探测现状

月球表面没有磁场的保护,粒子辐射是人类在月球活动的重要风险要素。概述了月球的辐射环境以及辐射来源,并介绍了月球探测的现状,特别提及了近年来几个较为典型的月球辐射探测实例及其探测结果;介绍了我国“嫦娥4号”上搭载的月表中子与辐射剂量探测仪（Lunar Lander Neutron&Dosimetry,LND）的科学目标及其技术指标。LND的科学目标主要包括：载人登月辐射剂量的测量、月球南极艾特肯盆地水含量的测量、艾特肯盆地FeO含量的测量,以及为日球层科学的研究提供依据。     

Prospects in the orbital and rotational dynamics of the Moon with the advent of sub-centimeter lunar laser ranging

Lunar laser ranging (LLR) measurements are crucial for advanced exploration of the laws of fundamental gravitational physics and geophysics as well as for future human and robotic missions to the Moon. The corner-cube reflectors (CCR) currently on the Moon require no power and still work perfectly since their installation during the project Apollo era. Current LLR technology allows us to measure distances to the Moon with a precision approaching 1 mm. As NASA pursues the vision of taking humans back to the Moon, new, more precise laser ranging applications will be demanded, including continuous tracking from more sites on Earth, placing new CCR arrays on the Moon, and possibly installing other devices such as transponders, etc. for multiple scientific and technical purposes. Since this effort involves humans in space, then in all situations the accuracy, fidelity, and robustness of the measurements, their adequate interpretation, and any products based on them, are of utmost importance. Successful achievement of this goal strongly demands further significant improvement of the theoretical model of the orbital and rotational dynamics of the Earth–Moon system. This model should inevitably be based on the theory of general relativity, fully incorporate the relevant geophysical processes, lunar librations, tides, and should rely upon the most recent standards and recommendations of the IAU for data analysis. This paper discusses methods and problems in developing such a mathematical model. The model will take into account all the classical and relativistic effects in the orbital and rotational motion of the Moon and Earth at the sub-centimeter level. The model is supposed to be implemented as a part of the computer code underlying NASA Goddard’s orbital analysis and geophysical parameter estimation package GEODYN and the ephemeris package PMOE 2003 of the Purple Mountain Observatory. The new model will allow us to navigate a spacecraft precisely to a location on the Moon. It will also greatly improve our understanding of the structure of the lunar interior and the nature of the physical interaction at the core–mantle interface layer. The new theory and upcoming millimeter LLR will give us the means to perform one of the most precise fundamental tests of general relativity in the solar system.     

Solar X-ray Monitor (XSM) on-board Chandrayaan-2 orbiter

The remote X-ray fluorescence spectroscopy is a powerful technique to investigate the elemental abundances in the atmosphere-less planetary bodies. The experiment involves measuring spectra of fluorescent X-rays from lunar surface using a low energy X-ray detector onboard an orbiting satellite. Since the flux of fluorescent X-ray lines critically depend on the flux and spectrum of the incident solar X-rays, it is essential to have simultaneous and accurate measurement of X-ray from both Moon and Sun. In the context of Moon, this technique has been employed since early days of space exploration to determine elemental composition of lunar surface. However, so far it has not been possible to exploit it to its full potential due to various reasons. Therefore it is planned to continue the remote X-ray fluorescence spectroscopy experiment on-board Chandrayaan-2 which includes both lunar X-ray observations and solar X-ray observations as two separate payloads. The lunar X-ray observations will be carried out by Chandra Large Area Soft x-ray Spectrometer (CLASS) experiment; whereas the solar X-ray observations will be carried out by a separate payload, Solar X-ray Monitor (XSM). Here we present the overall design of the XSM instrument, the present development status as well as preliminary results of the laboratory model testing. XSM instrument will have two packages namely – XSM sensor package and XSM electronics package. XSM will accurately measure spectrum of Solar X-rays in the energy range of 1–15 keV with energy resolution ∼200 eV @ 5.9 keV. This will be achieved by using state-of-the-art Silicon Drift Detector (SDD), which has a unique capability of maintaining high energy resolution at very high incident count rate expected from Solar X-rays. XSM onboard Chandrayaan-2 will be the first experiment to use such detector for Solar X-ray monitoring.     

中国探月工程

"嫦娥4号"于2019年1月3日成功实现人类航天器首次在月球背面软着陆,"玉兔2号"月球车率先在月背刻上了中国足迹。至今,国际月球探测活动共实施126次,期间出现两个探月高潮。20世纪50—70年代,美苏两个航天大国之间的竞争引起第一轮探月高潮。20世纪末至今,各航天国家意识到月球探测的战略意义,纷纷提出月球探测计划并积极实施,月球成为各国争先探测的热点,掀起第二轮探月热潮。中国自2004年首次绕月探测工程立项实施以来,共开展了"嫦娥1号""嫦娥2号""嫦娥3号""嫦娥4号"及再入返回飞行试验共5次月球探测任务,实现"五战五捷",在空间技术、空间科学与应用、国际合作等方面取得了非凡成就,积累了丰富的经验,后续将继续开展以无人月球科研站为主的月球探测活动。     

一种探月任务多窗口发射轨道设计方法

针对探月任务多窗口发射需求和目标轨道受到明显月球引力摄动的特点,提出一种快速高效的发射轨道设计方法：在星箭分离前的发射段,各发射窗口对应的发射轨道的一、二级飞行段完全相同,仅调整三级工作段程序角和无动力滑行时间,以满足入轨要求;在末级排放段,微调末级速度方向,利用月球摄动抬高末级近地点高度,使之超过GEO受保护区。该方法可统一火箭一、二级飞行段状态,缩小子级残骸落区范围,增强入轨参数设计的灵活性,显著提高星箭入轨参数迭代和相关分析工作的效率,明显改善末级离轨效果,符合空间安全相关要求,可推广应用于其他深空探测任务的多窗口发射轨道设计。     

太阳风电子在月表电磁场中的运动

月表磁异常区的分布是月球探测工程的重要内容. 但是由于月表电磁环境错综复 杂, 通常认为月球表面在特殊的空间天气条件下会带有数千伏电压. 以往的空间研究已经证实, 表面的带电与放电容易造成卫星仪器的异常或失联. 月表电场对电子 反射法有重要影响, 研究分析不同电磁条件下太阳风电子的运动轨迹,对月表环境 (电磁环境, 太阳风条件, 等离子体参数等)的研究可以更加深入细致. 通过模拟向月表运动的太阳风电子的运动轨迹, 分析了月表电磁环境的改变对太阳风电子反射 的影响, 并着重研究了月表电场对电子反射法遥感探测月表磁异常的影响, 为探测 月表电磁环境提供了重要的信息.      

Lunar apex–antapex cratering asymmetry as an impactor recorder in the Earth–Moon system

The degree of apex–antapex cratering asymmetry of a synchronously rotating satellite primarily depends on the mean encounter velocity of impactors with respect to the planetary system and the orbital velocity of the satellite. This means that we can estimate the mean encounter velocity of impactors by observing the apex–antapex cratering asymmetry, if the relationship between these is known. To apply this technique to the Moon, we attempt to derive the relationship between the mean encounter velocity of impactors and the degree of the lunar cratering asymmetry as a function of time, considering the temporal variation in the lunar orbital velocity during the last 4.0 Gyr. We used the cratering asymmetry of Zahnle et al. [Zahnle, K., Schenk, P., Sobieszczyk, S. et al. Differential cratering of synchronously rotating satellites by ecliptic comets. Icarus 153, 111–129, 2001] to obtain the relationship. Applying this relationship enables us to estimate the impactor’s velocity of the Earth–Moon system from an investigation of the spatial distribution of lunar craters. Furthermore, we re-evaluate the cratering asymmetry’s influence on lunar cratering chronology.     

Influence of lunar topography on simulated surface temperature

The surface temperature of the Moon is one of the essential parameters for the lunar exploration, especially to evaluate the Moon thermophysical features. The distribution of the temperature is heavily influenced by the Moon topography, which, however, is rarely studied in the state-of-art surface temperature models. Therefore, this paper takes the Moon topography into account to improve the surface temperature model, Racca model. The main parameters, such as slopes along the longitude and latitude directions, are estimated with the topography data from Chang’E-1 satellite and the Horn algorithm. Then the effective solar illumination model is then constructed with the slopes and the relative position to the subsolar point. Finally, the temperature distribution over the Moon surface is obtained with the effective illumination model and the improved Racca model. The results indicate that the distribution of the temperature is very sensitive to the fluctuation of the Moon surface. The change of the surface temperature is up to 150 K in some places compared to the result without considering the topography. In addition, the variation of the surface temperature increases with the distance from the subsolar point and the elevation, along both latitude and longitude directions. Furthermore, the simulated surface temperature coincides well with the brightness temperature in 37 GHz observed by the microwave sounder onboard Chang’E-2 satellite. The corresponded emissivity map not only eliminates the influence of the topography, but also hints the inherent properties of the lunar regolith just below the surface. Last but not the least, the distribution of the permanently shadowed regions (PSRs) in the lunar pole area is also evaluated with the simulated surface temperature result.     

Estimation of optical maturity parameter for lunar soil characterization using Moon Mineralogy Mapper (M3)

Prolonged exposure of the microscopic outer layer of the lunar surface to the space environment leads to the maturation of the surface. Maturation can be quantified and it may be expressed in terms of optical maturity (OMAT). Optical maturity estimations are very much helpful in the identification and mapping of the major minerals present on the lunar regolith. Estimation of the maturation and mineral mapping using remote sensing techniques are achieved, by coupling spectral reflectance of the lunar surface with an optimized origin. The present work estimates the optical maturity and Ferrous oxide content of the Goldschmidt and Schrodinger craters, through the recalibration of the classical method of Lucey et al. (2000a) with an origin of (0.08, 1.18) and Moon Mineralogy Mapper (M3) data. The overall recalibration results assure that the craters are highly matured.     

月地高速激光通信系统链路特性分析

根据地球、月球、探月卫星的三体运动,针对月地激光链路的建立与保持,分析了地球与月球对链路的遮挡问题,对链路模式进行分析。仿真结果表明:使用3颗月球极轨(Moon Polar Orbit,MPO)卫星来进行通信时,链路中断的次数将大大减少,但是在某些时间段上,仍然受到月球的遮挡而迫使通信链路频繁中断。使用4颗MPO卫星来进行通信时,链路将不再受到月球的阻挡,而仅受到地球的遮挡。同理,增加地球同步轨道卫星的数目可避免地球的遮挡。仿真结果表明,采用2颗地球同步轨道(Geostationary Earth Orbit,GEO)卫星建立链路,链路将不会受到地球的遮挡,建立深空科学研究的信息中继中心,采用激光通信技术,实现月地高速激光信息传输,为我国深空探测技术的发展提供支撑。     

“龙江2号”月球轨道微卫星定轨分析

微纳卫星深空探测任务中,通常所分配的测控资源有限,因此有必要对有限测控资源条件下微纳卫星的定轨精度进行分析。以微纳卫星深空探测为背景,采用"龙江2号"微卫星的轨道测量数据对其定轨精度进行了分析。"龙江2号"微卫星只有USB轨道测量数据,且环月段测控资源相对紧张,每天有两站跟踪,共约3～4 h的轨道测量数据。首先介绍了"龙江2号"微卫星飞行任务及其飞行过程中影响测定轨的因素;其次给出了定轨的动力学模型,对微卫星地月转移段的定轨精度进行了分析;最后通过分析摄动力、动量轮卸载以及数据弧段长度的影响,给出了微卫星环月阶段所使用的定轨策略,并通过重叠弧段比较的模式,给出了微卫星环月段的定轨精度。研究结论可以为后续微纳卫星深空探测任务提供有益参考。     

月球氦-3资源的原位开采热释放行为研究

月球氦-3资源的原位利用不仅可以解决深空探测的能源供给问题，而且能够极大地减少深空探测的成本.选取钛铁矿作为月壤的代表矿物，建立了氦-3原子以空位和间隙两种缺陷赋存于钛铁矿中的分子动力学模型，阐述了不同温度下氦-3原子在钛铁矿中的扩散和释放行为.模拟计算结果表明:当氦-3在钛铁矿中扩散时，这些原子倾向于聚集成气泡.根据氦-3释放量随温度的增长率，整个加热释放的过程可以划分为两个阶段.月球氦-3资源原位开采的最优加热温度应在1000K以上，该温度下以不同形式赋存的氦-3均可以大量释放.      

模拟月壤研制的初步设想

模拟月壤是月球样品的地球化学复制品，作者总结世界上已有的5种模拟月壤JSC-1，MLS．1，MLS-2，MKS-1和FJS-1的研制过程、方法与基本理化性质，认为系列化模拟月壤研制对中国首次月球探测有重要意义，在此基础上，作者提出系列化模拟月壤研制的基本思路．     

NASA历表在深空导航中的发展和比较

利用不同版本的数值历表,对我国正在进行的探月工程以及后续的金星、火星和木星等深空探测中的导航问题进行分析和讨论。对DE405、DE421和DE430的动力学模型及其使用的观测数据进行了分析比较,考察了历表的精度和稳定性。并根据DE430历表简单讨论了木星在我国深空探测站的可视问题,为以后深空导航提供参考。简单讨论了中科院国家天文台行星无线电研究团组基于月球无线电测距(LRR)发展我国自己的历表以及开展基于月球深空导航计划的可行性。     

China's Lunar and Deep Space Exploration Program for the Next Decade (2020-2030)

China has carried out four unmanned missions to the Moon since it launched Chang'E-1, the first lunar orbiter in 2007. With the implementation of the Chang'E-5 mission this year, the three phases of the lunar exploration program, namely orbiting, landing and returning, have been completed. In the plan of follow-up unmanned lunar exploration missions, it is planned to establish an experimental lunar research station at the lunar south pole by 2030 through the implementation of several missions, laying a foundation for the establishment of practical lunar research station in the future. China successfully launched its first Mars probe on 23 July 2020, followed in future by an asteroid mission, second Mars mission, and a mission to explore Jupiter and its moons.      

Surface temperatures at the nearside of the Moon as a record of the radiation budget of Earth’s climate system

Understanding the balance between incoming radiation from the Sun and outgoing radiation from Earth is of critical importance in the study of climate change on Earth. As the only natural satellite of Earth, the Moon is a unique platform for the study of the disk-wide radiation budget of Earth. There are no complications from atmosphere, hydrosphere, or biosphere on the Moon. The nearside of the Moon allows for a focus on the solar radiation during its daytime, and on terrestrial radiation during its nighttime. Additionally, lunar regolith temperature is an amplifier of the terrestrial radiation signal because lunar temperature is proportional to the fourth square root of radiation as such is much more sensitive to the weak terrestrial radiation in nighttime than the strong solar radiation in daytime. Indeed, the long-term lunar surface temperature time series obtained inadvertently by the Heat Flow Experiment at the Apollo 15 landing site three decades ago may be the first important observation from deep space of both incoming and outgoing radiation of the terrestrial climate system. A revisit of the lunar surface temperature time series reveals distinct characteristics in lunar surface daytime and nighttime temperature variations, governed respectively by solar and terrestrial radiation.     

Integration of In-Situ Resource Utilization into lunar/Mars exploration through field analogs

The ability to extract and process resources at the site of exploration into useful products such as propellants, life support and power system consumables, and radiation and rocket exhaust plume debris shielding, known as In-Situ Resource Utilization or ISRU, has the potential to significantly reduce the launch mass, risk, and cost of robotic and human exploration of space. The incorporation of ISRU into missions can also significantly influence technology selection and system development in other areas such as power, life support, and propulsion. For example, the ability to extract or produce large amounts of oxygen and/or water in-situ could minimize the need to completely close life support air and water processing system cycles, change thermal and radiation protection of habitats, and influence propellant selection for ascent vehicles and surface propulsive hoppers. While concepts and even laboratory work on evaluating and developing ISRU techniques such as oxygen extraction from lunar regolith have been going on since before the Apollo 11 Moon landing, no ISRU system has ever flown in space, and only recently have ISRU technologies been developed at a scale and at a system level that is relevant to actual robotic and human mission applications. Because ISRU hardware and systems have never been demonstrated or utilized before on robotic or human missions, architecture and mission planners and surface system hardware developers are hesitant to rely on ISRU products and services that are critical to mission and system implementation success. To build confidence in ISRU systems for future missions and assess how ISRU systems can best influence and integrate with other surface system elements, NASA, with international partners, are performing analog field tests to understand how to take advantage of ISRU capabilities and benefits with the minimum of risk associated with introducing this game-changing approach to exploration. This paper will describe and review the results of four analog field tests (Moses Lake in 6/08, Mauna Kea in 11/08, Flagstaff in 9/09, and Mauna Kea in 1/10) that have begun the process of integrating ISRU into robotic and human exploration systems and missions, and propose future ISRU-related analog field test activities that can be performed in collaboration with non-US space agencies.     

月球着陆器悬停阶段相对自主导航方法

月球着陆器着陆阶段导航信息分析是实现安全软着陆月面的一个关键.针对悬停阶段导航信息的要求,根据月球着陆器携带的仪器设备及其获取月面信息的特点,利用激光测距仪和光学导航相机进行光学相对导航.首先建立相对导航坐标系;其次根据各个坐标系之间的关系确定各转换矩阵和导航信息,估算着陆器相对月面着陆点的位置和姿态;最后通过仿真实验对该方法进行验证.结果表明,将激光测距仪和光学导航相机在着陆悬停阶段获取的月面信息进行融合,能快速、精确进行相对位置、姿态计算;对我国下一步的探月有重要应用价值,并可应用于火星探测和其他小行星探测的软着陆的近距相对导航.