X-ray fluorescence spectrometrywith the SELENE orbiter

X-ray fluorescence spectrometry of the Moon using a CCD-based instrument “XRS” is planned with the SELENE (Selenological and Engineering Explorer) orbiter, which will be launched in 2003. In the Apollo 15 and 16 missions, elemental mapping of Mg, Al and Si has been performed at the lunar equatorial regions for only 9% of the total surface. Much improved datasets will be obtained by using the XRS to map most of major elements, for 90% coverage of the total surface, and within 20 km spatial resolution. Key scientific objectives are (a) to measure the global average of lunar surface composition for investigation of the overall properties of lunar crust, (b) to map the rock-type distribution to study the formation and evolution of the crust and the maria, and to speculate the origin of the dichotomy, (c) to survey the chemical pattern of lava flows, or bottoms of craters or basins, for surveying the vertical structure and composition of the lunar crust and mantle. We describe the XRS instrument.     

Bayesian network-based extraction of lunar impact craters from optical images and DEM data

Impact craters are among the most noticeable geomorphological features on the planetary surface and yield significant information about terrain evolution and the history of the solar system. Thus, the recognition of impact craters is an important branch of modern planetary studies. Aiming at addressing problems associated with the insufficient and inaccurate detection of lunar impact craters, a decision fusion method within the Bayesian network (BN) framework is developed in this paper to handle multi-source information from both optical images and associated digital elevation model (DEM) data. First, we implement the edge-based method for efficiently searching crater candidates which are the image patches that can potentially contain impact craters. Secondly, the multi-source representations of an impact crater derived from both optical images and DEM data are proposed and constructed to quantitatively describe the two-dimensional (2D) and three-dimensional (3D) morphology, consisting of Histogram of Oriented Gradient (HOG), Histogram of Multi-scale Slope (HMS) and Histogram of Multi-scale Aspect (HMA). Finally, a BN-based framework integrates the multi-source representations of impact craters, which can provide reductant and complementary information, for distinguishing craters from non-craters. To evaluate the effectiveness and robustness of the proposed method, experiments were conducted on three lunar scenes using both orthoimages from the Lunar Reconnaissance Orbiter (LRO) and DEM data acquired by the Lunar Orbiter Laser Altimeter (LOLA). Experimental results demonstrate that integrating optical images with DEM data significantly decreases the number of false positives compared with using optical images alone, with F₁-score of 84.8% on average. Moreover, compared with other existing fusion methods, our proposed method was quite advantageous especially for the detection of small-scale craters with diameters less than 1000 m.     

月球撞击坑辐射纹的形成和消失机制及可能的年代学应用

辐射纹是年轻撞击坑周缘呈辐射状分布的明亮细条纹,是月表最显著的地貌特征之一,也是月球科学领域热点研究之一.根据目前对于月球撞击坑辐射纹的形成和类型的认识,分析辐射纹消失相关的空间风化、撞击导致的物质混合等地质过程;比较不同形成年龄撞击坑辐射纹的光学成熟度(OMAT)剖面,发现溅射物逐渐成熟过程中OMAT剖面的演变过程,...     

Integrated method for crater detection from topography and optical images and the new PH9224GT catalogue of Phobos impact craters

In a large majority of lunar and planetary surface images, impact craters are the most abundant geological features. Therefore, it is not surprising that crater detection algorithms (CDAs) are one of the most studied subjects of image processing and analysis in lunar and planetary science. In this work we are proposing an Integrated CDA, consisting of: (1) utilization of DEM (digital elevation map)-based CDA; (2) utilization of an optical-based CDA; (3) re-projection of used datasets and crater coordinates from normal to rotated view and back; (4) correction of the brightness and contrast of a used optical image; and (5) tile generation for the optical-based CDA and an assembling of results with an elimination of multiple detections, in combination with a pyramid approach down to the resolution of the available DEM image; and (6) a final integration of the results of DEM-based and optical-based CDAs, including a removal of duplicates. The proposed CDA is applied to one specific asteroid-like body, the small Martian moon Phobos. The experimental evaluation of the proposed CDA is done by a manual verification of crater-candidates and a search for uncatalogued craters. The evaluation has shown that the proposed CDA was used successfully for cataloging Phobos craters. The major result of this paper is the PH9224GT – currently the most complete global catalogue of the 9224 Phobos craters. The possible applications of the new catalogue are: (1) age estimations for any selected location; and (2) comparison/evaluation of the different chronology and production functions for Phobos. This confirms the practical applicability of the new Integrated CDA – an additional result of this paper, which can be used in order to considerably extend the current crater catalogues.     

Identification and characterization of science-rich landing sites for lunar lander missions using integrated remote sensing observations

Despite more than 52 years of lunar exploration, a wide range of first-order scientific questions remain about the Moon’s formation, temporal evolution, and current surface and interior properties. Addressing many of these questions requires obtaining new in situ analyses or return of lunar surface or shallow subsurface samples, and hence rely on the selection of optimal landing sites. Here, we present an approach to optimize science-rich lunar landing site selection studies based on the integration of remote sensing observations. Currently available remote sensing data, as well as features of interest published in the recent literature, were integrated in a Geographic Information System. This numerical database contains geographic information about all these findings, which can be consulted and used to simultaneously display multiple features and parameters of interest. To illustrate our approach, we identified the optimal landing sites to address the two top priorities (or goals) relative to Concept 3 of the National Research Council of the National Academies (2007), namely to ‘Determine the extent and composition of the primary feldspathic crust, (ur)KREEP layer, and other products of differentiation’ and to ‘Inventory the variety, age, distribution and origin of lunar rock types’. We review site requirements and propose possible landing sites for both these goals. We identified 29 sites that best fulfill both these goals and compare them with the landing sites of planned future lunar lander missions. Finally, we detail two of these science-rich sites (Aristarchus and Theophilus craters) which are particularly accessible through their location on the nearside.     

New results and questions of lunar exploration from SELENE,Chang’E-1, Chandrayaan-1 and LRO/LCROSS

The moon has longstanding questions such as lunar environments, origin, formation and evolution, magnetization of crustal rocks, internal structure and possible life. The recent lunar missions, e.g., SELenological and ENgineering Explorer “KAGUYA” (SELENE), Chang’E-1, Chandrayaan-1, and Lunar Reconnaissance Orbiter/Lunar CRater Observation and Sensing Satellite (LRO/LCROSS), have provided new opportunities to explore and understand these issues. In this paper, we reviewed and presented the results and findings in the fields of lunar gravity, magnetic field, atmosphere, surface geomorphology and compositional variations, volcano, craters, internal structure, water and life science from new lunar exploration missions. In addition, the new objectives and scientific questions on lunar explorations in near future are presented and discussed.     

Synergetic use of SAR and Thermal Infrared data to study the physical properties of the lunar surface

The surface layer of the Moon preserves vital evidences of lunar impact and cratering processes due to the absence of any Aeolian and fluvial erosion processes acting on it. By examining these evidences, which are recorded throughout the evolutionary history of the Moon, several basic aspects of lunar science can be understood, and this has direct relevance to the surfaces of other airless bodies within the solar system. In this study, rock abundance data obtained from Thermal Infrared (TIR) observations and radar Circular Polarization Ratio (CPR) data sets obtained from polarimetric SAR observations were correlated at some sample sites on the lunar surface. Preliminary results yielded qualitative and quantitative estimates for surface rock abundances. Except at distal ejecta deposits of young, bright craters a general correlation was observed between the two datasets. Mixed results were observed from the impact melt flows where the situation is complex due to the possible subsurface-volume and volume-subsurface interactions of the radar waves. But the flow features were clearly separated from the interior and ejecta regions of their parent craters in terms of CPR and rock abundances. The extent and distributions of pyroclastic deposits and dark haloed regions could not be distinctly identified at the resolution of datasets utilized. Near Gerasimovich D crater, the Diviner Radiometer has provided the first TIR observations of a newly discovered impact melt flow which was not visible in the optical imagery. This facilitated the first ever quantitative comparisons of the radar CPR and rock abundance values near such a region. Also, significant differences in spatial patterns between the radar and rock concentration data sets were observed, owing to the differences in the sensitivity of the two observations.     

Analysis of the brightness temperature features of the lunar surface using 37 GHz channel data from the Chang'E-2 microwave radiometer

Compared with other remote observations, brightness temperatures (T_B) derived from microwave emission measurements provide a unique means to characterize the physical properties of the lunar surface. Using Chang’E-2 microwave radiometer data, we produced 12 global T_B images of the lunar surface during a diurnal cycle with different local times separated by approximately 2?h. There are two types of remarkable T_B units on the lunar surface, the “hot regions” occurring during the lunar day in the lunar Maria regions and the “microwave cold spots” occurring during the nighttime typically related to young craters. Compared with their surroundings, the hot regions are much warmer during the lunar day and slightly colder at night, while the microwave cold spots are much colder during the lunar night and slightly warmer in the daytime. Moreover, the T_B heating and cooling rates of these two units are larger than others at the same average latitude where they are located during the lunar day, especially after sunrise and before sunset. The hot regions have a good agreement with the mare regions with high TiO₂ abundance. Besides, brightness temperatures in the lunar Maria correlate closely with their TiO₂ abundance. For most microwave cold spots, they agree with the young craters, and their brightness temperature distributions have a significant negative correlation with the lunar surface nighttime temperature and rock abundance.     

Hybrid method for crater detection based on topography reconstruction from optical images and the new LU78287GT catalogue of Lunar impact craters

Impact craters are ubiquitous and well-studied structures of high geological relevance on the surfaces of the Earth’s Moon, the terrestrial planets, the asteroids and the satellites of the outer planets. Therefore, it is not surprising that crater detection algorithms (CDAs) are one of the most studied subjects of image processing and analysis in lunar and planetary science. In this paper we are proposing a Hybrid CDA: a modified DEM (digital elevation map) reconstruction method used as a step in an existing CDA based on Hough transform. The new Hybrid CDA consists of: (1) reconstruction of topography from optical images using a shape from shading approach; (2) utilization of the DEM-based CDA; (3) correction of brightness and contrast of optical images used in order to be more suitable for evaluation of detections. An additional result of this work is a new method for evaluation of topography reconstruction algorithms, using a DEM-based CDA and an earlier approach for evaluation of CDAs. The new Hybrid CDA was tested using two Chandrayaan-1 Moon Mineralogy Mapper (M³) images and two excerpts of the Lunar Reconnaissance Orbiter (LRO) Wide Angle Camera (WAC) global optical image mosaic. As a result, the number of craters inside these four regions increased considerably from 1754 (as available in the previous LU60645GT catalogue) to 19 396 craters (as available in the resulting new LU78287GT catalogue). This confirmed the practical applicability of the new Hybrid CDA, which can be used in order to considerably extend current crater catalogues.     

Gamma-ray spectrometer for Japanese lunar polar orbiter

We review the current status of the development of Gamma-Ray Spectrometer (GRS) for the Lunar mission SELENE. The GRS instrument will measure gamma-rays in the energy range from 100 keV to 9 MeV. The instrument is a high-purity Ge detector surrounded by BGO and plastic scintillators which are operated as an anticoincidence shield, and is cooled by a Stirling cycle cryocooler. The primary objective is to provide global maps of the lunar composition. Measurements are anticipated for Fe, Ti, U, Th, K, Si, Mg, Al, O, Ca and Na over the entire lunar surface. The abundance of water ice in the permanently shaded craters at both the lunar poles will be measured with this instrument.     

基于多因子综合评估的月球探测软着陆区域及最佳巡航路线分析

选择合适的软着陆区域及规划合理的巡航路线是月球探测的基础工作。以位于月球背面南极—艾肯（South Pole-Aitken,SPA）盆地内的冯·卡门（Von Kármán）撞击坑作为研究区域,综合使用多因子分析评估了月球探测的着陆区域和巡航路线。评价体系主要包括能表征着陆安全性的撞击坑的密度、撞击坑的影响区域、整个区域的平整情况、部分区域的平整情况等因子和体现科学探索意义的区域垂直结构、岩石属性和（FeO+TiO₂）含量等因子,其中科学探索的评估分析是在安全可行性的基础上进行的。结果表明：在多因子叠加分析的基础上可选择出A、B及C 3个着陆区,并通过科学研究因子分析出路线2及路线3为合适的巡航路线。本研究为月球探测器着陆和巡航路线的规划提供了科学依据,为后续的月球探测工作提供了技术支持。     

基于嫦娥一号观测数据的月球形貌可视化技术

通过对月球形貌可视化技术的研究, 分析了利用嫦娥一号获取的月球地形和正射影像数据制作月球形貌图的技术方法. 重点介绍了广泛应用于嫦娥一号数据处理和分析的晕渲地形图制作、月球地形影像假彩色融合和三维形貌场景构建的原理, 并给出了每种方法的应用实例. 这些方法为后续月球探测研究、月球空间信息系统以及``数字月球'的建设奠定了基础.      

嫦娥三号巡视器有效载荷

嫦娥三号巡视器配置了全景相机、测月雷达、红外成像光谱仪、粒子激发X射线谱仪四种科学探测有效载荷. 介绍了有效载荷的科学探测任务、系统设计方案和系统组成,描述了各有效载荷的方案设计要点,设计中的主要关注点及主要技术指标等.      

嫦娥四号着陆器月面工作遮挡应对方案研究

嫦娥四号着陆于月球背面南极 艾特肯盆地内，着陆区周围复杂地形导致测控和通信遮挡风险。针对这一问题，开展了着陆区的测控、光照遮挡分析，提出利用轨道控制策略的精细化设计来提高着陆点精度、优化月面工作程序和增加自主控制功能的设计方法,全方面降低嫦娥四号着陆器在月球背面着陆区的生存风险。该方法已通过嫦娥四号着陆器在轨验证，可以为其他深空探测任务提供参考和借鉴。     

Characterizing bedrock lithologies using Small Crater Rims and Ejecta Probing (SCREP)

This paper describes the rationale, methodology, and importance of focusing on the rim and proximal ejecta of small (<5 km in diameter), immature impact craters to explore an underlying crustal lithology. Small Crater Rim and Ejecta Probing (SCREP) describes a methodology and application program that extracts bedrock spectral and compositional information from a remote sensing image. Extracted data can yield the pristine lithologies of a planetary crust that would otherwise be obscured by the products of space weathering processes. SCREP was developed with lunar data, specifically Clementine multispectral image mosaics, therefore the technique is discussed in this context. However, its application to other airless solar system bodies is apparent. Knowledge of the pristine bedrock compositions of a planetary crust provides insight into geological surface processes, which can be used to refine models of planetary interiors and their evolution.     

嫦娥三号着陆器有效载荷

嫦娥三号着陆器配置了地形地貌相机、月基光学望远镜、极紫外相机、降落相机等四种科学探测有效载荷.介绍了有效载荷的科学探测任务、系统设计方案和系统组成,描述了各有效载荷的方案设计和主要技术指标等.      

Exploring links between crater floor mineralogy and layered lunar crust

Floors of similar sized craters, representing material from similar depth horizons, have been studied to explore their suitability as mineralogy indicators at various depths within the lunar crust. Clementine UV–vis multispectral data was used to generate mineral abundance maps of crater floors and surroundings using a modified version of algorithm given by Pieters et al. (2001) [Pieters, C.M., Head, J.W., Gaddis, L., Jolliff, B. and Duke, M. Rock types of the south pole aitken basin and extent of basaltic volcanism, JGR (106) E11, 28001–28022, 2001.]. Substantial processing of the crater floor material due to variety of geological processes is evident in the generated maps, making straight forward interpretations difficult. However, systematic compositional trends in fresh craters on the floors of target craters seem to indicate the feasibility of such an effort.     

太阳风电子在月表电磁场中的运动

月表磁异常区的分布是月球探测工程的重要内容. 但是由于月表电磁环境错综复 杂, 通常认为月球表面在特殊的空间天气条件下会带有数千伏电压. 以往的空间研究已经证实, 表面的带电与放电容易造成卫星仪器的异常或失联. 月表电场对电子 反射法有重要影响, 研究分析不同电磁条件下太阳风电子的运动轨迹,对月表环境 (电磁环境, 太阳风条件, 等离子体参数等)的研究可以更加深入细致. 通过模拟向月表运动的太阳风电子的运动轨迹, 分析了月表电磁环境的改变对太阳风电子反射 的影响, 并着重研究了月表电场对电子反射法遥感探测月表磁异常的影响, 为探测 月表电磁环境提供了重要的信息.      

Open framework for objective evaluation of crater detection algorithms with first test-field subsystem based on MOLA data

Crater Detection Algorithms (CDAs) applications range from estimation of lunar/planetary surface age to autonomous landing on planets and asteroids and advanced statistical analyses. A large amount of work on CDAs has already been published. However, problems arise when evaluation results of some new CDA have to be compared with already published evaluation results. The problem is that different authors use different test-fields, different Ground-Truth (GT) catalogues, and even different methodologies for evaluation of their CDAs. Re-implementation of already published CDAs or its evaluation environment is a time-consuming and unpractical solution to this problem. In addition, implementation details are often insufficiently described in publications. As a result, there is a need in research community to develop a framework for objective evaluation of CDAs. A scientific question is how CDAs should be evaluated so that the results are easily and reliably comparable. In attempt to solve this issue we first analyzed previously published work on CDAs. In this paper, we propose a framework for solution of the problem of objective CDA evaluation. The framework includes: (1) a definition of the measure for differences between craters; (2) test-field topography based on the 1/64° MOLA data; (3) the GT catalogue wherein each of 17,582 craters is aligned with MOLA data and confirmed with catalogues by N.G. Barlow et al. and J.F. Rodionova et al.; (4) selection of methodology for training and testing; and (5) a Free-response Receiver Operating Characteristics (F-ROC) curves as a way to measure CDA performance. The handling of possible improvements of the framework in the future is additionally addressed as a part of discussion of results. Possible extensions with additional test-field subsystems based on visual images, data sets for other planets, evaluation methodologies for CDAs developed for different purposes than cataloguing of craters, are proposed as well. The goal of the proposed framework is to contribute to the research community by establishing guidelines for objective evaluation of CDAs.