Gamma-ray detector on board lunar mission Chang’E-1

Gamma-ray spectrometer (GRS) is included in the payload of Chinese first lunar mission Chang’E-1 that will be launched in 2007. Specific objectives of the GRS are to map abundance of O, Si, Fe, Ti, U, Th, K, and perhaps, Mg, Al, and Ca to depths of about 20 cm. There are remarkable advantages for GRS application to remote sensing elemental materials over the entire lunar surface: large effective area and good ability for background rejection. We will describe the design of GRS and present its performance in this paper. Moreover, the GRS calibration will also be introduced.     

The high precision gamma-ray spectrometer for lunar polar orbiter SELENE

The high precision gamma-ray spectrometer (GRS) is scheduled to be launched on the lunar polar orbiter of the SELENE mission in 2007. The GRS consists of a large Ge crystal as a main detector and massive bismuth germanate crystals as an anticoincidence detector. A Stirling cryocooler was adopted in cooling the Ge detector. The flight model of SELENE GRS has been completed and an energy resolution of 3.0 keV (FWHM) at 1.332 MeV has been achieved. The spectrometer aims to observe nuclear line gamma rays emitted from the lunar surface in a wide energy range from 100 keV to 12 MeV for one year and more to obtain chemical composition on the entire lunar surface. The gamma-ray data enable us to study lunar geoscience problems including crust and mantle composition, and volatile reservoirs at polar regions.     

X-ray fluorescence spectrometrywith the SELENE orbiter

X-ray fluorescence spectrometry of the Moon using a CCD-based instrument “XRS” is planned with the SELENE (Selenological and Engineering Explorer) orbiter, which will be launched in 2003. In the Apollo 15 and 16 missions, elemental mapping of Mg, Al and Si has been performed at the lunar equatorial regions for only 9% of the total surface. Much improved datasets will be obtained by using the XRS to map most of major elements, for 90% coverage of the total surface, and within 20 km spatial resolution. Key scientific objectives are (a) to measure the global average of lunar surface composition for investigation of the overall properties of lunar crust, (b) to map the rock-type distribution to study the formation and evolution of the crust and the maria, and to speculate the origin of the dichotomy, (c) to survey the chemical pattern of lava flows, or bottoms of craters or basins, for surveying the vertical structure and composition of the lunar crust and mantle. We describe the XRS instrument.     

Lunar international science coordination/calibration targets (L-ISCT)

Eight lunar areas, each ∼200 km in diameter, are identified as targets for coordinated science and instrument calibration for the orbital missions soon to be flown. Instrument teams from SELENE, Chang’E, Chandrayaan-1, and LRO are encouraged to participate in a coordinated activity of early-release data that will improve calibration and validation of data across independent and diverse instruments. The targets are representative of important lunar terrains and geologic processes and thus will also provide a broad introduction to lunar science for new investigators. We briefly identify additional cross-calibration issues for instruments that produce time series data rather than maps.     

Preliminary Scientific Results of Chang'E-1 Lunar Orbiter: Based on Payloads Detection Data in the First Phase

Chang'E-1 lunar Orbiter was launched by Long March 3A rocket from Xichang Satel-lite Launch Center at 18:05BT(Beijing Time) Oct.24,2007.It is the first step of its ambitious three-stage moon program,a new milestone in the Chinese space exploration history.The primary science objectives of Chang'E-1 lunar orbiter are to obtain three-Dimension(3D) stereo images of the lunar surface,to analyze the distribution and abundance of elements on the surface,to investigate the thickness of lunar soil,evaluate helium-3 resources and other characteristics,and to detect the space environment around the moon.To achieve the above four mission objectives,eight sets of scientific instruments are chosen as the payloads of the lunar orbiter,including a CCD stereo camera(CCD),a Sagnac-based interferometer spectrometer(ⅡM),a Laser Altimeter(LAM),a Microwave Radiometer(MRM),a Gamma-Ray Spectrometer(GRS),an X-ray spectrometer(XRS),a High-Energy Particle Detector(HPD),and two Solar Wind Ion Detectors(SWID).The detected data of the payloads show that all payloads work well.This paper introduces the status of payloads in the first phase and preliminary scientific results.     

Solar X-ray Monitor (XSM) on-board Chandrayaan-2 orbiter

The remote X-ray fluorescence spectroscopy is a powerful technique to investigate the elemental abundances in the atmosphere-less planetary bodies. The experiment involves measuring spectra of fluorescent X-rays from lunar surface using a low energy X-ray detector onboard an orbiting satellite. Since the flux of fluorescent X-ray lines critically depend on the flux and spectrum of the incident solar X-rays, it is essential to have simultaneous and accurate measurement of X-ray from both Moon and Sun. In the context of Moon, this technique has been employed since early days of space exploration to determine elemental composition of lunar surface. However, so far it has not been possible to exploit it to its full potential due to various reasons. Therefore it is planned to continue the remote X-ray fluorescence spectroscopy experiment on-board Chandrayaan-2 which includes both lunar X-ray observations and solar X-ray observations as two separate payloads. The lunar X-ray observations will be carried out by Chandra Large Area Soft x-ray Spectrometer (CLASS) experiment; whereas the solar X-ray observations will be carried out by a separate payload, Solar X-ray Monitor (XSM). Here we present the overall design of the XSM instrument, the present development status as well as preliminary results of the laboratory model testing. XSM instrument will have two packages namely – XSM sensor package and XSM electronics package. XSM will accurately measure spectrum of Solar X-rays in the energy range of 1–15 keV with energy resolution ∼200 eV @ 5.9 keV. This will be achieved by using state-of-the-art Silicon Drift Detector (SDD), which has a unique capability of maintaining high energy resolution at very high incident count rate expected from Solar X-rays. XSM onboard Chandrayaan-2 will be the first experiment to use such detector for Solar X-ray monitoring.     

Observation of the lunar topography by the laser altimeter LALT on board Japanese lunar explorer SELENE

The SELENE Laser Altimeter (LALT) is designed to map the Moon’s topography and will be launched in summer 2007. LALT incorporates Q-switched Cr doped Nd:YAG laser (1064 nm) with an output energy of 100 mJ and 1 Hz repetition frequency for about one year mission period. The laser pulse travels to the Moon’s surface and reflections from the surface are detected by a silicon avalanche photo-diode. The ranging distance is 50–150 km with about 5 m accuracy. Several corrections for accurate ranging data are investigated. The flight hardware has been qualified and passed all the integration tests. A principal goal of the LALT instrument is to obtain a much more detailed lunar topographic map which is superior in global coverage, measurement accuracy and number of data points to previous observations and models. The overall science objectives of LALT are (1) determination of lunar global figure, (2) internal structure and surface processes, (3) exploration of the lunar pole regions, and (4) reduction of lunar occultation data.     

月球基地建设方案设想

随着月球探测的深入发展,国内外众多月球探测方案和月球开发计划均将月球基地建设作为一个重要目标。月球基地建设将服务于后续无人月球探测和载人登月探测任务。通过月球基地的功能和意义分析,对月球基地的选址约束、建设步骤和实施过程提出了初步构想,并针对典型的探测站/器进行了分析。在此基础上,根据我国运载能力,提出了月球基地方案构想,并对月球基地建设的若干关键问题进行了初步探讨,可为后续月球基地建设提供参考。     

The ESA SMART-1 mission to the Moon with solar electric propulsion

SMART-1 is planned to be the first Small Mission for Advanced Research in Technology of the ESA Scientific Programme Horizons 2000 for a launch at the end of 2001. The mission is dedicated to the testing of new technologies for preparing future cornerstone missions, using Solar Electrical Propulsion in Deep Space. The mission operational lifetime includes a 6–17 months cruise until a lunar orbit (300–10000 km) with 6 month operations. The SMART-1 spacecraft will be launched either on Ariane 5 as auxiliary passenger or on Eurockot. The expected launch mass is 350 kg. This allows to bring a dedicated payload with spacecraft, instrument and electric propulsion diagnostics technologies, as well as giving an opportunity for new lunar geophysical and geochemical studies, and for cruise science on the way to the Moon.     

An ion analyzer for the lunar surface with E-parallel–B

We present a novel instrument concept to measure the energy and mass spectra of ions incident on the lunar surface, based on the E-parallel–B or Thomson-parabola device used extensively as a diagnostic in the plasma fusion community. The Apollo-era Suprathermal Ion Detector Experiment (SIDE) was the first instrument package to perform in-situ measurements of ions incident on the lunar surface. The ions can originate from a variety of sources, including the solar wind, the Earth’s magnetotail, and photoionization of the thin lunar atmosphere. The species and energy distribution of ions arriving at the lunar surface depend in a complicated and poorly-understood fashion on the phase of the lunar day, the position of the Moon with respect to the Earth, and on the local plasma environment.     

Impact of far-side satellite tracking on gravity estimation in the SELENE project

Preliminary results of numerical simulation are presented to examine the gravity estimation capability in the Japanese lunar exploration project SELENE (SELenological and ENgineering Explorer), which will be launched in 2003. One of the new characteristics of the SELENE lunar gravimetry is 4-way satellite-to-satellite Doppler tracking of a low-altitude lunar orbiter by means of a high-altitude relay satellite. It is shown that planned satellites configuration will provide a good far-side data coverage of the lunar orbiter and will improve lunar gravity field as well as far-side selenoid.     

An introduction to the lunar and planetary science activities in Korea

Korea is planning a series of lunar space programs in 2020 starting with a lunar orbiter and a lander with a rover. Compared to other countries, Korea has a relatively brief history in space and planetary sciences. With the expected Korean missions on the near-term horizon and the relatively few Korean planetary scientists, Korea Institute of Geoscience and Mineral Resources (KIGAM) has established a new planetary research group focusing on development of prospective lunar instruments, analysis of the publicly available planetary data of the Moon, organizing nationwide planetary workshops, and initiating planetary educational programs with academic institutions. Korea has also initiated its own rocket development program, which could acquire a rocket-launch capability toward the Korean lunar mission. For the prospective Korea’s lunar science program, feasibility studies for some candidate science payloads have been started since 2010 for an orbiter and a lander. The concept design of each candidate instrument has been accomplished in 2012. It is expected that the development of science payloads may start by 2014 as Phase A. Not only developing hardware required for the lunar mission but also educational activities for young students are high priorities for Korea. The new plan of the Korean lunar mission can be successfully accomplished with international cooperative outreach programs in conjunction with internationally accessible planetary data system (PDS). This paper introduces the KIGAM’s international cooperative planetary research and educational programs and also summarizes other nationwide new developments for Korean lunar research projects at Kyung Hee University and Hanyang University.     

太阳风电子在月表电磁场中的运动

月表磁异常区的分布是月球探测工程的重要内容. 但是由于月表电磁环境错综复 杂, 通常认为月球表面在特殊的空间天气条件下会带有数千伏电压. 以往的空间研究已经证实, 表面的带电与放电容易造成卫星仪器的异常或失联. 月表电场对电子 反射法有重要影响, 研究分析不同电磁条件下太阳风电子的运动轨迹,对月表环境 (电磁环境, 太阳风条件, 等离子体参数等)的研究可以更加深入细致. 通过模拟向月表运动的太阳风电子的运动轨迹, 分析了月表电磁环境的改变对太阳风电子反射 的影响, 并着重研究了月表电场对电子反射法遥感探测月表磁异常的影响, 为探测 月表电磁环境提供了重要的信息.      

中继卫星(TDRS)支持环月探测器的研究

给出了基于轨道根数的跟踪与数据中继卫星(TDRS)对月球探测器的可视算法,分析和比较了地面站和TDRS对月球探测器的测控跟踪能力.结果表明,与依靠地面站相比,使用TDRS后,在不考虑月球遮挡情况下,对环月探测器的测控覆盖率可由50%提高到99%.存在最大月球遮挡时也能达到60%,大大提高了对环月探测器的测控能力.最后讨论了TDRS跟踪环月探测器对TDRS卫星平台的要求,提出了地面站与TDRS相结合的测控方案.在当前TDRS天线运动范围受限情况下,仍能实现对月球探测器的大范围测控覆盖率.      

Instrument study of the Lunar Dust eXplorer (LDX) for a lunar lander mission

One of the highest-priority issues for a future human or robotic lunar exploration is the lunar dust. This problem should be studied in depth in order to develop an environment model for a future lunar exploration. A future ESA lunar lander mission requires the measurement of dust transport phenomena above the lunar surface. Here, we describe an instrument design concept to measure slow and fast moving charged lunar dust which is based on the principle of charge induction. LDX has a low mass and measures the speed and trajectory of individual dust particles with sizes below one micrometer. Furthermore, LDX has an impact ionization target to monitor the interplanetary dust background. The sensor consists of three planes of segmented grid electrodes and each electrode is connected to an individual charge sensitive amplifier. Numerical signals were computed using the Coulomb software package. The LDX sensitive area is approximately 400 cm². Our simulations reveal trajectory uncertainties of better than 2° with an absolute position accuracy of better than 2 mm.     

考虑相互碰撞影响的月壤颗粒运动轨迹计算方法研究

针对登月着陆器下降过程扬起月壤颗粒的运动轨迹及空间分布问题, 提出了考虑月壤颗粒发生完全弹性碰撞和非完全弹性碰撞两种情况的月壤颗粒运动轨迹计算方法. 根据质量守恒和能量守恒定律确定月壤颗粒相互碰撞后的速度, 通过羽流场与月壤颗粒的流固耦合相互迭代计算方法, 获得被扬起的月壤颗粒在羽流场和相互碰撞共同作用下随时间的运动轨迹和空间分布. 基于美国Apollo 11登月过程实测数据, 采用数值模拟对该方法进行验证. 结果表明, 考虑月壤颗粒相互碰撞的影响后, 其运动规律出现较明显的扩散趋势. 进一步考虑月壤颗粒相互碰撞引起能量损失的影响后, 月壤颗粒的扩散趋势有所减弱, 并且扬起的高度随着恢复系数的减小而降低.      

Precise orbit determination using the batch filter based on particle filtering with genetic resampling approach

In this study, genetic resampling (GRS) approach is utilized for precise orbit determination (POD) using the batch filter based on particle filtering (PF). Two genetic operations, which are arithmetic crossover and residual mutation, are used for GRS of the batch filter based on PF (PF batch filter). For POD, Laser-ranging Precise Orbit Determination System (LPODS) and satellite laser ranging (SLR) observations of the CHAMP satellite are used. Monte Carlo trials for POD are performed by one hundred times. The characteristics of the POD results by PF batch filter with GRS are compared with those of a PF batch filter with minimum residual resampling (MRRS). The post-fit residual, 3D error by external orbit comparison, and POD repeatability are analyzed for orbit quality assessments. The POD results are externally checked by NASA JPL’s orbits using totally different software, measurements, and techniques. For post-fit residuals and 3D errors, both MRRS and GRS give accurate estimation results whose mean root mean square (RMS) values are at a level of 5 cm and 10–13 cm, respectively. The mean radial orbit errors of both methods are at a level of 5 cm. For POD repeatability represented as the standard deviations of post-fit residuals and 3D errors by repetitive PODs, however, GRS yields 25% and 13% more robust estimation results than MRRS for post-fit residual and 3D error, respectively. This study shows that PF batch filter with GRS approach using genetic operations is superior to PF batch filter with MRRS in terms of robustness in POD with SLR observations.     

The Japanese lunar mission SELENE: Science goals and present status

The Japanese lunar mission SELENE (SELenological and ENgineering Explorer) has been in development to target launch scheduled 2007 summer by H-IIA rocket. The SELENE is starting final integration test after SAR (System Acceptance Review), SRR (System Reliability Review) and instrument environment test. The SELENE is a remote-sensing mission orbiting 100 km altitude of the Moon for nominal one year and extended some months to collect the data for studying the origin and evolution of the Moon. Fourteen instruments and experiment systems are preparing for studies of the Moon, in the Moon, and from the Moon; global element and mineral compositions, topological structure, gravity field of whole moon, and electromagnetic and particle environment of the Moon. The new data center SOAC (SELENE Operation and data Analysis Center) are completed to construct in JAXA Sagamihara campus, and end-to-end test will be carried out between SOAC and data downlink stations.     

The simulation of lunar gravity field recovery from D-VLBI of Chang’E-1 and SELENE lunar orbiters

The lunar gravity field is a foundation to study the lunar interior structure, and to recover the evolution history of the Moon. It is still an open and key topic for lunar science. For above mentioned reasons, it becomes one of the important scientific objectives of recent lunar missions, such as KAGUYA (SELENE) the Japanese lunar mission and Chang’E-1, the Chinese lunar mission. The Chang’E-1 and the SELENE were successfully launched in 2007. It is estimated that these two missions can fly around the Moon longer than 6 months simultaneously. In these two missions, the Chinese new VLBI (Very Long Baseline Interferometry) network will be applied for precise orbit determination (POD) by using a differential VLBI (D-VLBI) method during the mission period. The same-beam D-VLBI technique will contribute to recover the lunar gravity field together with other conventional observables, i.e. R&RR (Range and Range Rate) and multi-way Doppler. Taking VLBI tracking conditions into consideration and using the GEODYNII/SOVLE software of GSFC/NASA/USA [8 and 10], we simulated the lunar gravity field recovering ability with and without D-VLBI between the Chang’E-1 and SELENE main satellite. The cases of overlapped flying and tracking period of 30 days, 60 days and 90 days have been analyzed, respectively. The results show that D-VLBI tracking between two lunar satellites can improve the gravity field recovery remarkably. The results and methods introduced in this paper will benefit the actual missions.     

Lunar laser altimetry in the SELENE project

Lunar laser altimeter (LALT) has been developed for the Japanese lunar exploration SELENE (SELenological and ENgineering Explorer) in 2003. Lunar laser altimetry and two other selenodetic missions are put together and called RISE (Researches In SElenodesy) project that has been developed mainly by National Astronomical Observatory of Japan. Main objective of this measurements is to construct a more global and accurate topographic model of the moon than Clementine's GLTM-2. The newly developed topography of the moon will make a great contribution to many problems of lunar geology, geophysics, and the reduction of lunar occultation data. In order to expand the coverage in latitude, LALT has a function of slant ranging in the direction about 40 degrees aside from nadir. LALT is designed to have a capability of detecting most of returned pulses from the lunar surface even for the slant ranging with proper threshold level.