Understanding the mineralogy of a compositional anomaly north of the Korolev basin using Moon mineralogy mapper

The work attempts to understand the mineralogy of the reported geochemical anomaly located in the north – northeast region of the Korolev basin using Moon Mineralogy Mapper (M³) onboard Chandrayaan ?1 and other lunar datasets. To understand the mineralogy, colour composite images using integrated band depth parameters and mineral indices were prepared, and the M³ spectral signatures corresponding to the unique colours of these colours composites were investigated. Further, Modified Gaussian Model (MGM) deconvolution was applied to these spectra. The results of spectra studies reveal that the area is made up of heterogeneous lithologies, predominantly composed of anorthosite along with minor occurrences of pyroxene-bearing (both low-calcium and high-calcium variety) and spinel-bearing lithologies. Correlation of spectral studies with the morphology revealed that pyroxene was typically associated with fresh craters and their ejecta. Spinel was found to be ubiquitous and is well-dispersed, possibly distributed along with the ejecta blanket of large impact craters. This association hints that the pyroxene-hosted layer most likely occurs beneath the spinel-bearing layer. Such observed assemblages may have resulted from physical mixing during the impact cratering events. This mixed lithology could arise due to the mafic mineral-bearing ejecta of the South-Pole Aitken (SPA) basin and spinel-bearing Orientale ejecta. Korolev most likely impacted on a thick layer of SPA ejecta, and impact basins such as Hertzsprung and Orientale have occurred post-Korolev formation. Orientale being the youngest of the large impact basins, its ejecta carrying the light plain material would have overprinted the older SPA ejecta. Smaller impact craters would have churned the ejecta so that presently we observe a composite lithology with a variable abundance of pyroxene and spinel.     

Analysis of the brightness temperature features of the lunar surface using 37 GHz channel data from the Chang'E-2 microwave radiometer

Compared with other remote observations, brightness temperatures (T_B) derived from microwave emission measurements provide a unique means to characterize the physical properties of the lunar surface. Using Chang’E-2 microwave radiometer data, we produced 12 global T_B images of the lunar surface during a diurnal cycle with different local times separated by approximately 2?h. There are two types of remarkable T_B units on the lunar surface, the “hot regions” occurring during the lunar day in the lunar Maria regions and the “microwave cold spots” occurring during the nighttime typically related to young craters. Compared with their surroundings, the hot regions are much warmer during the lunar day and slightly colder at night, while the microwave cold spots are much colder during the lunar night and slightly warmer in the daytime. Moreover, the T_B heating and cooling rates of these two units are larger than others at the same average latitude where they are located during the lunar day, especially after sunrise and before sunset. The hot regions have a good agreement with the mare regions with high TiO₂ abundance. Besides, brightness temperatures in the lunar Maria correlate closely with their TiO₂ abundance. For most microwave cold spots, they agree with the young craters, and their brightness temperature distributions have a significant negative correlation with the lunar surface nighttime temperature and rock abundance.     

The South Pole-Aitken basin region,Moon: GIS-based geologic investigation using Kaguya elemental information

Using Geographic Information Systems (GIS), we performed comparative analysis among stratigraphic information and the Kaguya (SELENE) GRS data of the ∼2500-km-diameter South Pole-Aitken (SPA) basin and its surroundings. Results indicate that the surface rock materials (including ancient crater materials, mare basalts, and possible SPA impact melt) are average to slightly elevated in K and Th with respect to the rest of the Moon. Also, this study demonstrates that K and Th have not significantly changed since the formation of SPA. The elemental signatures of the impact basin of Fe, Ti, Si, O through time include evidence for resurfacing by ejecta materials and late-stage volcanism. The oldest surfaces of SPA are found to be oxygen-depleted during the heavy bombardment period relative to later stages of geologic development, followed by both an increase in silicon and oxygen, possibly due to ejecta sourced from outside of SPA, and subsequent modification due to mare basaltic volcanism, which increased iron and titanium within SPA. The influence of the distinct geologic history of SPA and surroundings on the mineralogic and elemental abundances is evident as shown in our investigation.     

X-ray fluorescence spectrometrywith the SELENE orbiter

X-ray fluorescence spectrometry of the Moon using a CCD-based instrument “XRS” is planned with the SELENE (Selenological and Engineering Explorer) orbiter, which will be launched in 2003. In the Apollo 15 and 16 missions, elemental mapping of Mg, Al and Si has been performed at the lunar equatorial regions for only 9% of the total surface. Much improved datasets will be obtained by using the XRS to map most of major elements, for 90% coverage of the total surface, and within 20 km spatial resolution. Key scientific objectives are (a) to measure the global average of lunar surface composition for investigation of the overall properties of lunar crust, (b) to map the rock-type distribution to study the formation and evolution of the crust and the maria, and to speculate the origin of the dichotomy, (c) to survey the chemical pattern of lava flows, or bottoms of craters or basins, for surveying the vertical structure and composition of the lunar crust and mantle. We describe the XRS instrument.     

Estimation of optical maturity parameter for lunar soil characterization using Moon Mineralogy Mapper (M3)

Prolonged exposure of the microscopic outer layer of the lunar surface to the space environment leads to the maturation of the surface. Maturation can be quantified and it may be expressed in terms of optical maturity (OMAT). Optical maturity estimations are very much helpful in the identification and mapping of the major minerals present on the lunar regolith. Estimation of the maturation and mineral mapping using remote sensing techniques are achieved, by coupling spectral reflectance of the lunar surface with an optimized origin. The present work estimates the optical maturity and Ferrous oxide content of the Goldschmidt and Schrodinger craters, through the recalibration of the classical method of Lucey et al. (2000a) with an origin of (0.08, 1.18) and Moon Mineralogy Mapper (M3) data. The overall recalibration results assure that the craters are highly matured.     

Night side lunar surface potential in the Earth’s magnetosphere

In the Earth’s magnetotail, Japanese Moon orbiter Kaguya repeatedly encountered the plasmoid or plasma sheet. The encounters were characterized by the low energy ion signatures including lobe cold ions, cold ion acceleration in the plasma sheet-lobe boundaries, and hot plasma sheet ions or fast flowing ions associated with plasmoids. Different from the previous observations made in the magnetotail by the GEOTAIL spacecraft, the ions were affected by the existence of the Moon. On the dayside of the Moon, tailward flowing cold ions and their acceleration were observed. However, on the night side, tailward flowing cold ions could not be observed since the Moon blocked them. In stead, ion acceleration by the spacecraft potential and the electron beam accelerated by the potential difference between lunar surface and spacecraft were simultaneously observed. These electron and ion data enabled us to determine the night side lunar surface potential and spacecraft potential only from the observed data for the first time.     

月球撞击坑辐射纹的形成和消失机制及可能的年代学应用

辐射纹是年轻撞击坑周缘呈辐射状分布的明亮细条纹,是月表最显著的地貌特征之一,也是月球科学领域热点研究之一.根据目前对于月球撞击坑辐射纹的形成和类型的认识,分析辐射纹消失相关的空间风化、撞击导致的物质混合等地质过程;比较不同形成年龄撞击坑辐射纹的光学成熟度(OMAT)剖面,发现溅射物逐渐成熟过程中OMAT剖面的演变过程,...     

Solar X-ray Monitor (XSM) on-board Chandrayaan-2 orbiter

The remote X-ray fluorescence spectroscopy is a powerful technique to investigate the elemental abundances in the atmosphere-less planetary bodies. The experiment involves measuring spectra of fluorescent X-rays from lunar surface using a low energy X-ray detector onboard an orbiting satellite. Since the flux of fluorescent X-ray lines critically depend on the flux and spectrum of the incident solar X-rays, it is essential to have simultaneous and accurate measurement of X-ray from both Moon and Sun. In the context of Moon, this technique has been employed since early days of space exploration to determine elemental composition of lunar surface. However, so far it has not been possible to exploit it to its full potential due to various reasons. Therefore it is planned to continue the remote X-ray fluorescence spectroscopy experiment on-board Chandrayaan-2 which includes both lunar X-ray observations and solar X-ray observations as two separate payloads. The lunar X-ray observations will be carried out by Chandra Large Area Soft x-ray Spectrometer (CLASS) experiment; whereas the solar X-ray observations will be carried out by a separate payload, Solar X-ray Monitor (XSM). Here we present the overall design of the XSM instrument, the present development status as well as preliminary results of the laboratory model testing. XSM instrument will have two packages namely – XSM sensor package and XSM electronics package. XSM will accurately measure spectrum of Solar X-rays in the energy range of 1–15 keV with energy resolution ∼200 eV @ 5.9 keV. This will be achieved by using state-of-the-art Silicon Drift Detector (SDD), which has a unique capability of maintaining high energy resolution at very high incident count rate expected from Solar X-rays. XSM onboard Chandrayaan-2 will be the first experiment to use such detector for Solar X-ray monitoring.     

嫦娥三号巡视器有效载荷

嫦娥三号巡视器配置了全景相机、测月雷达、红外成像光谱仪、粒子激发X射线谱仪四种科学探测有效载荷. 介绍了有效载荷的科学探测任务、系统设计方案和系统组成,描述了各有效载荷的方案设计要点,设计中的主要关注点及主要技术指标等.      

Laboratory investigations of the survivability of bacteria in hypervelocity impacts.

It is now well established that material naturally moves around the Solar System, even from planetary surface to planetary surface. Accordingly, the idea that life is distributed throughout space and did not necessarily originate on the Earth but migrated here from elsewhere (Panspermia) is increasingly deemed worthy of consideration. If life arrived at the Earth from space, its relative speed will typically be of order many km s-1, and the resulting collision with the Earth and its atmosphere will be in the hypervelocity regime. A mechanism for the bacteria to survive such an impact is required. Therefore a programme of hypervelocity impacts in the laboratory at (4.5 +/- 0.6) km s-1 was carried out using bacteria (Rhodococcus) laden projectiles. After impacts on a variety of target materials (rock, glass and metal) attempts were made to culture Rhodococcus from the surface of the resulting craters and also from the target material ejected during crater formation. Control shots with clean projectiles yielded no evidence for Rhodococcus growth from any crater surface or ejecta. When projectiles doped with Rhodococcus were used no impact crater surface yielded colonies of Rhodococcus. However, for four shots of bacteria into rock (two on chalk and two on granite) the ejecta was afterwards found to give colonies of Rhodococcus. This was not true for shots onto glass. In addition, shots into aerogel (density 96 kg m-3) were also carried out (two with clean projectiles and two with projectiles with Rhodococcus). This crudely simulated aero-capture in a planetary atmosphere. No evidence for Rhodococcus growth was found from the projectiles captured in the aerogel from any of the four shots.     

Characterizing bedrock lithologies using Small Crater Rims and Ejecta Probing (SCREP)

This paper describes the rationale, methodology, and importance of focusing on the rim and proximal ejecta of small (<5 km in diameter), immature impact craters to explore an underlying crustal lithology. Small Crater Rim and Ejecta Probing (SCREP) describes a methodology and application program that extracts bedrock spectral and compositional information from a remote sensing image. Extracted data can yield the pristine lithologies of a planetary crust that would otherwise be obscured by the products of space weathering processes. SCREP was developed with lunar data, specifically Clementine multispectral image mosaics, therefore the technique is discussed in this context. However, its application to other airless solar system bodies is apparent. Knowledge of the pristine bedrock compositions of a planetary crust provides insight into geological surface processes, which can be used to refine models of planetary interiors and their evolution.     

A lunar laboratory

An international research laboratory can be established on the Moon in the early years of the 21st Century. It can be built using the transportation system now envisioned by the National Aeronautics and Space Administration, which includes a space station for Earth orbital logistics and orbital transfer vehicles for Earth-Moon transportation. A scientific laboratory on the Moon would permit extended surface and subsurface geological exploration; long-duration experiments defining the lunar environment and its modification by surface activity; new classes of observations in astronomy; space plasma and fundamental physics experiments; and lunar resource development. The discovery of a lunar source for propellants may reduce the cost of constructing large facilities in space and enhance other space programs such as Mars exploration.     

月球仍然活跃的构造、火成和内部特征等证据

月球尽管被作为类地行星演化的最终形态的代表,被认为在25亿年前已经完全冷却,根据阿波罗时 代以来、特别是近十余年的月球轨道器和着陆器获得的关于月球构造、火成活动、月震和内部结构等多种证据,表明月球从深层内部到表面仍然活跃,尚未彻底冷却“死亡”。这将完全改变人们关于月球演化历史和状态的观念。     

基于多因子综合评估的月球探测软着陆区域及最佳巡航路线分析

选择合适的软着陆区域及规划合理的巡航路线是月球探测的基础工作。以位于月球背面南极—艾肯（South Pole-Aitken,SPA）盆地内的冯·卡门（Von Kármán）撞击坑作为研究区域,综合使用多因子分析评估了月球探测的着陆区域和巡航路线。评价体系主要包括能表征着陆安全性的撞击坑的密度、撞击坑的影响区域、整个区域的平整情况、部分区域的平整情况等因子和体现科学探索意义的区域垂直结构、岩石属性和（FeO+TiO₂）含量等因子,其中科学探索的评估分析是在安全可行性的基础上进行的。结果表明：在多因子叠加分析的基础上可选择出A、B及C 3个着陆区,并通过科学研究因子分析出路线2及路线3为合适的巡航路线。本研究为月球探测器着陆和巡航路线的规划提供了科学依据,为后续的月球探测工作提供了技术支持。     

Mass loading of planetary atmospheres by rocky satellites—II: Transport and enhanced lifetimes of satellite ejecta in planetary magnetospheres

Extensive studies have been conducted concerning individual mass, temporal and positional distribution of submicron rocky ejecta existing in the satellite-planetary gravitational sphere of influence. The transit time of the major portion of the ejecta that is transported from the satellite's gravitational sphere of influence to the planetary magnetopause is about one week and represents a mass loading pulse occurring each satellite orbit. The mass-flux distributions of lunar ejecta at the surface of the magnetopause for a complete lunar orbit are presented. Spatial mass densities of lunar ejecta in specific zones of the magnetosphere provide a means to compare sporadic interplanetary dust spatial mass densities in the same zones.     

Integrated method for crater detection from topography and optical images and the new PH9224GT catalogue of Phobos impact craters

In a large majority of lunar and planetary surface images, impact craters are the most abundant geological features. Therefore, it is not surprising that crater detection algorithms (CDAs) are one of the most studied subjects of image processing and analysis in lunar and planetary science. In this work we are proposing an Integrated CDA, consisting of: (1) utilization of DEM (digital elevation map)-based CDA; (2) utilization of an optical-based CDA; (3) re-projection of used datasets and crater coordinates from normal to rotated view and back; (4) correction of the brightness and contrast of a used optical image; and (5) tile generation for the optical-based CDA and an assembling of results with an elimination of multiple detections, in combination with a pyramid approach down to the resolution of the available DEM image; and (6) a final integration of the results of DEM-based and optical-based CDAs, including a removal of duplicates. The proposed CDA is applied to one specific asteroid-like body, the small Martian moon Phobos. The experimental evaluation of the proposed CDA is done by a manual verification of crater-candidates and a search for uncatalogued craters. The evaluation has shown that the proposed CDA was used successfully for cataloging Phobos craters. The major result of this paper is the PH9224GT – currently the most complete global catalogue of the 9224 Phobos craters. The possible applications of the new catalogue are: (1) age estimations for any selected location; and (2) comparison/evaluation of the different chronology and production functions for Phobos. This confirms the practical applicability of the new Integrated CDA – an additional result of this paper, which can be used in order to considerably extend the current crater catalogues.     

Surface temperatures at the nearside of the Moon as a record of the radiation budget of Earth’s climate system

Understanding the balance between incoming radiation from the Sun and outgoing radiation from Earth is of critical importance in the study of climate change on Earth. As the only natural satellite of Earth, the Moon is a unique platform for the study of the disk-wide radiation budget of Earth. There are no complications from atmosphere, hydrosphere, or biosphere on the Moon. The nearside of the Moon allows for a focus on the solar radiation during its daytime, and on terrestrial radiation during its nighttime. Additionally, lunar regolith temperature is an amplifier of the terrestrial radiation signal because lunar temperature is proportional to the fourth square root of radiation as such is much more sensitive to the weak terrestrial radiation in nighttime than the strong solar radiation in daytime. Indeed, the long-term lunar surface temperature time series obtained inadvertently by the Heat Flow Experiment at the Apollo 15 landing site three decades ago may be the first important observation from deep space of both incoming and outgoing radiation of the terrestrial climate system. A revisit of the lunar surface temperature time series reveals distinct characteristics in lunar surface daytime and nighttime temperature variations, governed respectively by solar and terrestrial radiation.     

Lunar apex–antapex cratering asymmetry as an impactor recorder in the Earth–Moon system

The degree of apex–antapex cratering asymmetry of a synchronously rotating satellite primarily depends on the mean encounter velocity of impactors with respect to the planetary system and the orbital velocity of the satellite. This means that we can estimate the mean encounter velocity of impactors by observing the apex–antapex cratering asymmetry, if the relationship between these is known. To apply this technique to the Moon, we attempt to derive the relationship between the mean encounter velocity of impactors and the degree of the lunar cratering asymmetry as a function of time, considering the temporal variation in the lunar orbital velocity during the last 4.0 Gyr. We used the cratering asymmetry of Zahnle et al. [Zahnle, K., Schenk, P., Sobieszczyk, S. et al. Differential cratering of synchronously rotating satellites by ecliptic comets. Icarus 153, 111–129, 2001] to obtain the relationship. Applying this relationship enables us to estimate the impactor’s velocity of the Earth–Moon system from an investigation of the spatial distribution of lunar craters. Furthermore, we re-evaluate the cratering asymmetry’s influence on lunar cratering chronology.     

Space-radiation-induced photon luminescence of the Moon

We report on the results of a continuing study of the photon luminescence of the Moon induced by Galactic Cosmic Rays (GCRs) and space radiation from the Sun, using the Monte Carlo program FLUKA. Understanding the space radiation environment is critical to future exploration of the Moon, and this includes photons. The model of the lunar surface is taken to be the chemical composition of soils found at various landing sites during the Apollo and Luna programs, averaged over all such sites to define a generic regolith for the present analysis. This surface model then becomes the target that is bombarded by Galactic Cosmic Rays (GCRs) and Solar Energetic Particles (SEPs) or Solar Particle Events (SPEs) above 1 keV in FLUKA to determine the photon fluence albedo produced by the Moon’s surface when there is no sunlight and Earthshine. The result is to be distinguished from the gamma-ray spectrum produced by the radioactive decay of radiogenic constituents lying in the surface and interior of the Moon. From the photon fluence we derive the spectrum which can be utilized to examine existing lunar spectral data and to aid future orbiting instrumentation in the measurement of various components of the space-radiation-induced photon luminescence present on the Moon.     

Monitoring the moon's transient atmosphere with an all-sky imager

An indispensable tool in terrestrial aeronomy, all-sky imaging has recently been shown to be useful in studies of the Moon's exosphere. Two days after the peak of the 1998 Leonid meteor shower, an extended region of neutral sodium emission was detected in the night sky using a bare-CCD imaging system. The feature was found to be a train of sodium gas originating from the Moon. Subsequent observations indicate the feature is normally visible (max. brightness ∼15–90 Rayleighs (R)) during nights near the time of new Moon. Monthly monitoring of the feature using an all-sky system can provide useful information about the time-variability of the lunar atmosphere. Several processes are believed to be responsible for the production of lunar Na and evidence is presented indicating that two of these processes were each responsible for the observed brightness enhancements of the sodium feature on two separate new Moon periods in January and March 2000.