挠性卫星自适应姿态跟踪控制

具有较强变轨或姿态机动能力的卫星,在轨运行过程中其质量特性随着液体燃料的消耗而不断变化,卫星的惯量特性也随之变化,使卫星质量参数呈现不确知的特性。如何在惯量矩阵未知情况下实现挠性卫星的姿态跟踪控制是研究的重点。考虑目标姿态角速度可以时变的一般情形,设计了基于误差四元数的自适应姿态跟踪控制律,给出了稳定性证明。数学仿真结果表明该控制律能够在卫星转动惯量未知情况下,保证卫星本体姿态和跟踪目标姿态。     

浮升混合飞艇气动性能及总体参数分析

为了兼顾飞艇的气动性能和浮升特性,充分发挥二者的优势,并增强可控性,提出了一种基于NACA高升力翼型的组合嚢体式混合飞艇气动布局.采用计算流体力学(CFD)方法建立混合飞艇FLUENT计算模型,数值模拟了它在不同速度和迎角下的升阻特性、纵向静稳定性及浮升特性,并进行了总体性能评估,最后将其与常规飞艇进行了对比.结果表明:该组合嚢体飞艇布局具有较好的气动性能和效率,相同条件下提供的动升力为常规飞艇的3倍;当飞行速度大于26 m/s时,混合飞艇总升力效率开始大于常规飞艇,能够提供更好的浮升特性.此外,相同设计载荷下混合飞艇的外形尺寸更小,有利于增加有效载荷,可为低空大型混合飞艇的研发提供参考.      

径向变体飞艇总体参数估算方法

为突破临近空间可操纵浮空器的关键技术难点,使可操纵浮空器往返地面至临近空间成为可能,提出了一种径向变体飞艇的总体参数估算方法,该方法基于阿基米德浮力定律和李式变体飞艇原理(Li-Style Transformable Airship Theory),通过艇体结构的径向变形来实现艇体截面积的自适与可控变化,控制飞艇容积变化以改变净升力大小,并使飞艇在容积变化中始终保持可操纵的气动外形,从而实现飞艇的升、降与驻空和飞行等控制.通过设计变形方案估算内气囊与外气囊尺寸,分析力学平衡与能源平衡估算飞艇长度.在拟定设计参数的基础上,给出了一种太阳能径向变体飞艇的总体设计方案,并通过设计实例验证了此方法的可行性与实用性.     

多刚体卫星转动惯量在轨辨识

惯量辨识需要精确的动力学特性,针对动力学特性不可忽略太阳电池阵转动这一状况,提出一种惯量辨识方法,用于卫星本体惯量和太阳电池阵惯量的联合辨识.在建立多刚体姿态动力学基础上,针对辨识变量的耦合特性,推导带约束的优化辨识模型,再利用约束最小二乘算法求解.最后通过仿真计算验证了辨识方法的可行性.     

基于激光测距的飞艇净重在线计算方法研究

通过对三维建模软件CATIA中的飞艇副气囊模型进行切片分割,获得了不同副气囊高度下的对应体积值,使用最小二乘法建立了副气囊中心点高度与副气囊体积的三次曲线拟合公式,采用相位式激光测距仪对副气囊中心高度测量,使用该公式可以估算出副气囊的实时体积大小,从而推算飞艇净重大小,掌握飞艇的压力高度和起降能力。使用某次飞行试验对副气囊高度测量的数据计算出的飞艇净重值,与多次地面称重数据一致性较好,验证了使用激光测距仪对大型飞艇净重进行在线评估的可行性,并使用该方法对某飞艇某次飞行试验过程中的净重进行了分析,对飞艇的压力高度进行了核算。     

基于激光测距的飞艇净重在线计算方法研究CSCD

通过对三维建模软件CATIA中的飞艇副气囊模型进行切片分割,获得了不同副气囊高度下的对应体积值,使用最小二乘法建立了副气囊中心点高度与副气囊体积的三次曲线拟合公式,采用相位式激光测距仪对副气囊中心高度测量,使用该公式可以估算出副气囊的实时体积大小,从而推算飞艇净重大小,掌握飞艇的压力高度和起降能力。使用某次飞行试验对副气囊高度测量的数据计算出的飞艇净重值,与多次地面称重数据一致性较好,验证了使用激光测距仪对大型飞艇净重进行在线评估的可行性,并使用该方法对某飞艇某次飞行试验过程中的净重进行了分析,对飞艇的压力高度进行了核算。     

基于激光测距的飞艇净重在线计算方法研究

通过对三维建模软件CATIA中的飞艇副气囊模型进行切片分割,获得了不同副气囊高度下的对应体积值,使用最小二乘法建立了副气囊中心点高度与副气囊体积的三次曲线拟合公式,采用相位式激光测距仪对副气囊中心高度测量,使用该公式可以估算出副气囊的实时体积大小,从而推算飞艇净重大小,掌握飞艇的压力高度和起降能力。使用某次飞行试验对副气囊高度测量的数据计算出的飞艇净重值,与多次地面称重数据一致性较好,验证了使用激光测距仪对大型飞艇净重进行在线评估的可行性,并使用该方法对某飞艇某次飞行试验过程中的净重进行了分析,对飞艇的压力高度进行了核算。     

平流层飞艇蒙皮材料织物纤维拔出过程分析

平流层飞艇高度以及昼夜温差改变,都将引起飞艇内外压差有很大的变化.飞艇蒙皮承力层纱线拔出是其撕裂现象的细观过程,对飞艇耐压能力有着重要的影响.对某平流层飞艇蒙皮材料织物层进行细观力学建模,通过研究纱线拔出过程力的变化,并与试验结果对比,指出整个拔出过程可以分为近似线性增长阶段和振荡阶段,两阶段过渡点纱线拔出力的大小对于蒙皮材料撕裂扩展性能有着重要意义.同时,平流层紫外和臭氧等复杂环境,通过对织物纱线表面老化,降低其表面性能,从而使得最大拔出力减小,飞艇耐压能力降低.     

某高空飞艇光学吊舱热状态及飞行策略研究

使用光学遥感设备开展地球大气层临边观测是研究中高层大气目标特性变化规律的重要手段之一.光学遥感设备的热状态对其光学精度及系统信噪比控制至关重要，能够直接影响观测数据质量乃至观测任务的实现.针对中高层大气OH自由基超分辨空间外差光谱仪在高空飞艇平台探测的热状态需求，分析了光谱仪吊舱的热环境，给出了光学吊舱的热平衡控制方程，并对上升/下降段和平飞段先后开展了热状态计算，得到光学吊舱在不同状态下的温度变化规律、光电部件的温度场等计算结果.结果表明热控方案能够满足光谱仪的热状态需求.根据热状态分析计算结果，制定了飞行前后及飞行过程中光学吊舱的热控策略.本文分析方法和飞行策略可为同类飞行设备热控状态设计及研究提供数据参考.      

平流层飞艇热力学验证温度测量方法研究

平流层飞艇的热力学分析是平流层飞艇关键技术之一。针对热力学分析的工程验证及模型完善,提出了适合于平流层飞艇的艇囊内气体及囊体表面的温度测量方法,包括采集点的分布,传感器的选型,数据传输和处理及数据准确性评价等。经过两次平流层飞艇的缩比飞行试验,对比同艇发放的探空仪采集的温度数据,验证了该方法测量到的数据的准确性。     

Ascent trajectory optimization for stratospheric airship with thermal effects

Ascent trajectory optimization with thermal effects is addressed for a stratospheric airship. Basic thermal characteristics of the stratospheric airship are introduced. Besides, the airship’s equations of motion are constructed by including the factors about aerodynamic force, added mass and wind profiles which are developed based on horizontal-wind model. For both minimum-time and minimum-energy flights during ascent, the trajectory optimization problem is described with the path and terminal constraints in different scenarios and then, is converted into a parameter optimization problem by a direct collocation method. Sparse Nonlinear OPTimizer(SNOPT) is employed as a nonlinear programming solver and two scenarios are adopted. The solutions obtained illustrate that the trajectories are greatly affected by the thermal behaviors which prolong the daytime minimum-time flights of about 20.8% compared with that of nighttime in scenario 1 and of about 10.5% in scenario 2. And there is the same trend for minimum-energy flights. For the energy consumption of minimum-time flights, 6% decrease is abstained in scenario 1 and 5% decrease in scenario 2. However, a few energy consumption reduction is achieved for minimum-energy flights. Solar radiation is the principal component and the natural wind also affects the thermal behaviors of stratospheric airship during ascent. The relationship between take-off time and performance of airship during ascent is discussed. it is found that the take-off time at dusk is best choice for stratospheric airship. And in addition, for saving energy, airship prefers to fly downwind.     

平流层飞艇总体设计的基础问题

平流层飞艇是一种新型的长航时临近空间飞行器，具有驻空高度高、驻空时间长、承载能力大、使用效费比高等特点，在对地观测及通信中继等领域具有广泛应用前景。但是该飞行器系统十分复杂，技术与设计实现难度大，总体设计需要考虑的基础问题及解决方案尚不完全明晰。根据平流层大气风场、温度和压力的基础特征，考虑平流层环境对平流层飞艇总体设计的影响，根据空气动力学与热力学基本理论，分析平流层飞艇的显著特征及与常规低空飞艇的区别，研究这些基础问题对平流层飞艇总体设计的影响，为平流层飞艇技术发展提供建议和参考。      

Experimental investigation of transient thermal behavior of an airship under different solar radiation and airflow conditions

Knowledge of the thermal behavior of airships is crucial to the development of airship technology. An experiment apparatus is constructed to investigate the thermal response characteristics of airships, and the transient temperature distributions of both hull and inner gas are obtained under the irradiation of a solar simulator and various airflow conditions. In the course of the research, the transient temperature change of the experimental airship is measured for four airflow speeds of 0 m/s (natural convection), 3.26 m/s, 5.5 m/s and 7.0 m/s, and two incident solar radiation values of 842.4 W/m² and 972.0 W/m². The results show that solar irradiation has significant influence on the airship hull and inner gas temperatures even if the airship stays in a ground airflow environment where the heat transfer is dominated by radiation and convection. The airflow around the airship is conducive to reduce the hull temperature and temperature nonuniformity. Transient thermal response of airships rapidly varies with time under solar radiation conditions and the hull temperature remains approximately constant in ∼5–10 min. Finally, a transient thermal model of airship is developed and the model is validated through comparison with the experimental data.     

Modeling and analysis of floating performances of stratospheric semi-rigid airships

In recent years, the study of semi-rigid airship has revived with the development of airships. Semi-rigid airships have some characteristics of rigid airships and non-rigid airships. Due to the flexibility of the envelope of the non-rigid airship, the variation of the temperature of the inner gas will lead to its structure deformation and affect its flight altitude. This paper develops the structural mechanics model, thermodynamic model and dynamic model of the semi-rigid airship, based on which nonlinear finite element analysis is employed for geometrically nonlinear deformation of the airship upper film in consideration of thermodynamics and structural mechanics coupling. Based on the thermal-structural interaction, the thermal characteristics and flight performances of the airship during floating flight are investigated. The 3-D solar radiation and temperature distribution of the airship skin and the temperature variation of the inner gas are presented to investigate the thermal performance of the airship, flight velocity, acceleration and flight altitude are simulated to investigate the flight performance, and the variations of the volume and pressure difference of the inner gas are calculated to provide a basis for structure design. The results of the simulation can be referenced for the design of the semi-rigid airship, and can be used for the further study on the attitude control of the airship during its floating flight.     

大气紊流下飞艇动力学建模与姿态控制

大气紊流是影响高空飞艇水平面内运动的重要原因,紊流扰动对飞艇的安全性能和定点悬停有严重影响,能否克服扰动,直接决定飞艇的载荷能力和续航时间.根据高空大气紊流的特点以及紊流风速对飞艇姿态调整的影响建立风场的传递函数模型,根据风速三角形关系建立扰动下的飞艇水平面内动力学模型,利用内模控制原理设计出内模控制器,将扰动信号反馈到系统的输入端,从而对扰动进行直接控制.仿真结果表明所设计的控制器可以有效抑制大气紊流对飞艇飞行性能的影响.