On the Accuracy And Resolution of Radar Signals

Information matrices are derived for estimates of the range parameters of moving targets as obtained by combining a priori information (if available) with reflected radar signals observed in the presence of additive white Gaussian noise. The inverse of the information matrix provides a lower bound on the covariance matrix of any unbiased parameter estimates. This bound can be approached with a high signal-to-noise ratio and optimum data processing (matched filters). Arbitrary frequency modulation, amplitude modulation, and target motion as well as various assumptions on processing the RF phase are considered. The multiple-target case makes possible investigation of a signal's resolution ability, as well as its accuracy potentials. Results for a carrier frequency much greater than the effective signal bandwidth are obtained as a special case. A main purpose of the paper is the reduction of the original radar problem to a linear model which is equivalent in the sense of having the same information matrix. These models provide valuable insight into the relative effects of multiple targets, choice of modulation, a priori information, and assumptions regarding RF phase and bandwidth. The linear equivalent model also leads to a valuable computational algorithm for investigations using digital or hybrid computers. The various special cases of interest are obtained by simple modifications of the general case, and thus the algorithm can provide a very versatile tool for evaluating and designing radar signals.     

Multiple target angle tracking using sensor array outputs

The use of the output of an array of sensors to track multiple independently moving targets is reported. The output of each sensor in the array is the sum of signals received from each of the targets. The results of direction-of-arrival estimation by eigenvalue analysis are extended to derive a recursive procedure based on a matrix quadratic equation. The solution of this matrix quadratic equation is used to provide updated target positions. A linear approximation method for estimating the solution of the matrix equation is presented. The algorithm is demonstrated by the simulated tracking of two targets. The main advantage of the algorithm is that a closed-form solution for updating the target angle estimates has been obtained. Also, its application is straightforward, and the data association problem due to uncertainty in the origin of the measurements is avoided. However, it requires the inversion of an N×N as well as other linear operations, so that the computational burden becomes substantial as N becomes very large     

An effect of range-heterogeneous clutter on adaptive Dopplerfilters

The practical implementation of adaptive Doppler filters requires estimates of clutter parameters to determine the adaptive weights. A method of deriving the estimate via the sample matrix inversion (SMI) algorithm using multiple data snapshots from adjacent range cells is presented. For homogeneous clutter environments, the results of this technique asymptotically approach the optimum (a priori known covariance matrix) as the number of snapshots approaches infinity; this asymptotic behavior does not occur for heterogeneous clutter environments. An equation for the decrease in improvement factor is derived. To promote understanding, the simplified special case of narrowband clutter is considered in detail. In almost all cases, the loss is small     

交互多模型PHD滤波跟踪多目标方法

在机动多目标跟踪问题中,目标数未知或随时间而变化,概率假设密度（PHD）滤波可以在每一时间步估计多目标状态和目标数,但单模型方法不能给出精确的估计。提出了一种交互多模型PHD滤波方法,建立多模型描述多目标运动方式,利用PHD滤波结合多模型跟踪目标运动轨迹。同时,给出了多传感器交互多模型PHD滤波方法,以提高目标跟踪精度。     

损伤对平纹编织陶瓷基复合材料梁振动特性影响的试验研究

为研究平纹编织陶瓷基复合材料（CMCs）梁受损伤影响的非线性振动特性,本文分别开展了拉伸试验和振动试验。拉伸试验用于获得平纹编织CMCs受损伤影响的变刚度行为,多次正弦扫频试验用于获得振动载荷下平纹编织CMCs梁受损伤影响的非线性行为。拉伸试验得到的非线性应力-应变曲线表明材料受损伤影响变刚度行为明显。梁初始固有频率的试验值与理论值相比,相对误差小于1%。振动试验结果从两方面表明了损伤对梁振动特性的影响。一是模态参数的变化,固有频率从初始值（256.44Hz）不断减小,阻尼比呈现增大趋势,而共振位移幅值受固有频率和阻尼比的耦合作用发生非线性且非单调变化。固有频率的变化造成位移幅频特性曲线的左移现象。二是位移幅频特性曲线的多峰现象,在多处载荷频率下产生了位移峰值点。本文的试验结果可用于指导平纹编织CMCs结构动力学计算理论模型的建立。     

Micro-macro Unified Analysis of Flow Behavior of Particle-reinforced Metal Matrix Composites

This article presents a micro-macro unified model for predicting the deformation of metal matrix composites (MMCs). A macro-scale model is developed to obtain the proper boundary conditions for the micro-scale model, which is used to assess the microstructural deformation of materials. The usage of the submodel technique in the analysis makes it possible to shed light on the stress and strain field at the microlevel. This is helpful to investigate the linkage between the microscopic and the macroscopic flow behavior of the composites. An iterative procedure is also proposed to find out the optimum parameters. The results show that the convergence can be attained after three iterations in computation. In order to demonstrate the reliability of micro-macro unified model, results based on the continuum composite model are also investigated using the stress-strain relation of composite obtained from the iterations. By comparing the proposed unified model to the continuum composite model, it is clear that the former exhibits large plastic deformation in the case of little macroscopic deformation, and the stresses and strains obtained from the submodel are higher than those from the macroscopic deformation.     

Integrated track splitting filter--efficient multi-scan single target tracking in clutter

A fully automatic tracking algorithm must be able to deal with an unknown number of targets, unknown target initiation and termination times, false measurements and possibly time-varying target trajectory behaviour. An efficient algorithm for tracking in this environment is presented here. This approach makes use of estimates of the probability of target existence, which is an integral part of the algorithm. This allows for the efficient generation and management of possible target hypotheses, yielding an algorithm with performance that matches what can be obtained by multiple hypothesis tracking-based approaches, but at a significantly lower computational cost. This paper considers only the single target case for clarity. The extension to multiple targets is easily incorporated into this framework. Simulation studies are given that show the effectiveness of this approach in the presence of heavy and nonuniform clutter when tracking a target in an environment of low probability of detection and in an environment where the target performs violent manoeuvres.     

Multiple-Model Probability Hypothesis Density Filter for Tracking Maneuvering Targets

Tracking multiple targets with uncertain target dynamics is a difficult problem, especially with nonlinear state and/or measurement equations. With multiple targets, representing the full posterior distribution over target states is not practical. The problem becomes even more complicated when the number of targets varies, in which case the dimensionality of the state space itself becomes a discrete random variable. The probability hypothesis density (PHD) filter, which propagates only the first-order statistical moment (the PHD) of the full target posterior, has been shown to be a computationally efficient solution to multitarget tracking problems with a varying number of targets. The integral of PHD in any region of the state space gives the expected number of targets in that region. With maneuvering targets, detecting and tracking the changes in the target motion model also become important. The target dynamic model uncertainty can be resolved by assuming multiple models for possible motion modes and then combining the mode-dependent estimates in a manner similar to the one used in the interacting multiple model (IMM) estimator. This paper propose a multiple-model implementation of the PHD filter, which approximates the PHD by a set of weighted random samples propagated over time using sequential Monte Carlo (SMC) methods. The resulting filter can handle nonlinear, non-Gaussian dynamics with uncertain model parameters in multisensor-multitarget tracking scenarios. Simulation results are presented to show the effectiveness of the proposed filter over single-model PHD filters.     

Performance evaluation of multi-sensor classification systems

A common problem in classification is to use one/more sensors to observe repeated measurements of a target's features/attributes, and in turn update the targets' posterior classification probabilities to aid in target identification. This paper addresses the following questions: 1. How do we quantify the classification performance of a sensor? 2. What happens to the posterior probabilities as the number of measurements increase? 3. Will the targets be classified correctly? While the Kalman filter allows for off-line estimation of kinematic performance (covariance matrix), a comparable approach for studying classification accuracy has not been done previously. We develop a new analytical approach for computing the long-run classification performance of a sensor and also present recursive formulas for efficient calculation of the same. We show that, under a minimal condition, a sensor will eventually classify all targets perfectly. We also develop a methodology for evaluating the classification performance of multi-sensor fusion systems involving sensors of varying quality. The contributions of this paper are 1. A simple metric to quantify a sensor's ability to discriminate between the targets being identified, and its use in comparing multiple sensors, 2. An approximate formula based on this metric to compute off-line estimates of the rate of convergence toward perfect classification, and the number of measurements required to achieve a desired level of classification accuracy, and 3. The use of this metric to evaluate classification performance of multi-sensor fusion systems.     

Multitarget tracking using the joint multitarget probability density

This work addresses the problem of tracking multiple moving targets by recursively estimating the joint multitarget probability density (JMPD). Estimation of the JMPD is done in a Bayesian framework and provides a method for tracking multiple targets which allows nonlinear target motion and measurement to state coupling as well as nonGaussian target state densities. The JMPD technique simultaneously estimates both the target states and the number of targets in the surveillance region based on the set of measurements made. We give an implementation of the JMPD method based on particle filtering techniques and provide an adaptive sampling scheme which explicitly models the multitarget nature of the problem. We show that this implementation of the JMPD technique provides a natural way to track a collection of targets, is computationally tractable, and performs well under difficult conditions such as target crossing, convoy movement, and low measurement signal-to-noise ratio (SNR).     

Radar Measurement Noise Variance Estimation with Several Targets of Opportunity

A number of methods exist to track a target's uncertain motion through space using inherently inaccurate sensor measurements. A powerful method of adaptive estimation is the interacting multiple model (IMM) estimator. In order to carry out state estimation from the noisy measurements of a sensor, however, the filter should have knowledge of the statistical characteristics of the noise associated with that sensor. The statistical characteristics (accuracies) of real sensors, however, are not always available, in particular for legacy sensors. A method is presented of determining the measurement noise variances of a sensor, assumed to be constant, by using multiple IMM estimators while tracking targets whose motion is not known---targets of opportunity. Combining techniques outlined in [2] and [6], the likelihood functions are obtained for a number of IMM estimators, each with different assumptions on the measurement noise variances. Then a search is carried out over a varying grid of IMMs to bracket the variances of the sensor measurement noises. The end result consists of estimates of the measurement noise variances of the sensor in question.     

Precision large scale air traffic surveillance using IMM/assignmentestimators

We present the development and implementation of a multisensor-multitarget tracking algorithm for large scale air traffic surveillance based on interacting multiple model (IMM) state estimation combined with a 2-dimensional assignment for data association. The algorithm can be used to track a large number of targets from measurements obtained with a large number of radars. The use of the algorithm is illustrated on measurements obtained from 5 FAA radars, which are asynchronous, heterogeneous, and geographically distributed over a large area. Both secondary radar data (beacon returns from cooperative targets) as well as primary radar data (skin returns from noncooperative targets) are used. The target IDs from the beacon returns are not used in the data association. The surveillance region includes about 800 targets that exhibit different types of motion. The performance of an IMM estimator with linear motion models is compared with that of the Kalman filter (KF). A number of performance measures that can be used on real data without knowledge of the ground truth are presented for this purpose. It is shown that the IMM estimator performs better than the KF. The advantage of fusing multisensor data is quantified. It is also shown that the computational requirements in the multisensor case are lower than in single sensor case, Finally, an IMM estimator with a nonlinear motion model (coordinated turn) is shown to further improve the performance during the maneuvering periods over the IMM with linear models     

Performance evaluation of track fusion with information matrixfilter

In a multisensor environment, each sensor detects multiple targets and creates corresponding tracks. Fusion of tracks from these, possibly dissimilar, sensors yields more accurate kinematic and attribute information regarding the target. Two methodologies have been employed for such purpose, which are: measurement fusion and state vector fusion. It is well known that the measurement fusion approach is optimal but computationally inefficient and the state vector fusion algorithms are more efficient but suboptimal, in general. This is so because the state vector estimates to be fused obtained from two sensors, are not conditionally independent in general due to the common process noise from the target being tracked. It is to be noted that there are three approaches to state vector fusion, which are: weighted covariance, information matrix, and pseudomeasurement. This research is restricted solely to performance evaluation of the information matrix form of state vector fusion. Closed-form analytical solution of steady state fused covariance has been derived as a measure of performance using this approach. Note that the results are derived under the assumptions that the two sensors are synchronized and no misassociation or merged measurement is considered in the study. Results are compared with those using Monte Carlo simulation, which was used in the past to predict fusion system performance by various authors. These results provide additional insight into the mechanism of track fusion and greatly simplify evaluation of fusion performance. In addition, availability of such a solution facilitates the trade-off studies for designing fusion systems under various operating conditions     

Adaptive Optical Target Detection Using Correlated Images

A method for target detection that achieves clutter rejection by the use of multiple observations of the same target scene is developed. Multiple scene observations can be obtained by processing separate frequency bands of the same target scene or by recursively processing sequential observations in time. Optimal detection algorithms are developed, based on the assumption that the image intensity can be modeled as a variable mean spatial Gaussian process. Several fast detection algorithms are derived which make use of the fact that the covariance matrices of many optical and infrared (IR) images can be accurately approximated by diagonal matrices. These algorithms provide efficient solutions to the problem of processing multiple correlated scenes or multiple sequential imaging. Computer simulations based on actual optical and IR image data were used for checking the theoretical results. The new detection algorithms achieved performance improvement in detection signal-to-noise ratio of up to 10 dB over conventional target correlation methods.     

基于滤波器结构的压缩感知雷达感知矩阵优化

 压缩感知雷达的目标场景恢复性能要求不同目标的反射回波在压缩空间上的互相关性尽可能小。基于该思想,提出了压缩感知雷达感知矩阵优化模型,根据系统参数和任务信息,以降低感知矩阵互相关性为目标,自适应地构造发射波形和测量矩阵,提升系统性能。分别给出了基于滤波器结构的压缩感知雷达发射波形优化、测量矩阵优化以及波形-测量矩阵联合优化算法。仿真结果表明:本文提出的压缩感知雷达感知矩阵优化模型和算法能够有效地提高场景恢复精度。     

基于几何矩阵的增强虚拟现实

增强虚拟现实是组合真实场景和虚拟场景,以达到丰富真实场景的目的.针对摄像机相对景深做较小运动时所获得的视频,提出了一种基于几何矩阵的增强虚拟现实方法.摄像机在这种运动情况下,可以用一个几何矩阵来描述两帧之间的关系,这样就大大简化真实场景和虚拟场景的组合.同时,由于虚拟场景来自二维图像,因此,非常容易对准虚拟物体在视频中的位置.理论和真实视频实验表明,本文提出的增强虚拟现实方法具有计算量小和真实性强等优点.     

A non-Bayesian segmenting tracker for highly maneuvering targets

The segmenting track identifier (STI) is introduced as a new methodology for tracking highly maneuvering targets. This nonBayesian approach dynamically partitions a target track into a sequence of track segments, making hard estimates of when the target's maneuvering mode transitions occur, and then estimates the parameters of the target model for each segment. STI is compared with two variable structures interacting multiple model (VS-IMM) algorithms through simulations, where it is shown to have a three fold performance advantage in median absolute turn rate estimation errors, as well as better position estimation for very highly maneuvering targets. STI is also shown to outperform a Rauch-Tung-Striebel (RTS) fixed-interval smoother when estimates are retrospectively derived, and STI accurately characterize the temporal pattern of maneuvers.     

Detection of Target Multiplicity Using Monopulse Quadrature Angle

The feasibility of using the indicated quadrature angle of arrival of a monopulse radar to discriminate a single target from multiple targets, separated in angle within a radar resolution cell, is investigated. The analysis is performed for steady (fixed) and Rayleigh fluctuating targets which cover a broad range of target characteristics. In both cases, the interfering signals due to noise and clutter in the sum and difference monopulse channels are assumed to be independent, zero-mean Gaussian processes. Detection and false alarm probabilities are evaluated analytically and the receiver operating characteristics are obtained for both fixed and fluctuating target cases. It is shown that multiple targets can be discriminated from a single target condition by integrating the indicated monopulse quadrature angle of arrival from several independent pulses. It is also shown that the probability of detecting multiple targets increases as the fluctuation in the target radar cross section decreases, approaching the fixed amplitude case in the limit.     

Airborne GMTI radar position bias estimation using static-rotatortargets of opportunity

In target tracking systems: using GMTI (ground moving target indicator) radars on airborne platforms, the locations of these platforms are available from GPS-based estimates. However, these estimated locations are subject to errors that are, typically, stationary autocorrelated random processes, i.e., slowly varying biases. In situations where there are no known-location targets to estimate these biases, the next best recourse is to use targets of opportunity at fixed but unknown locations. Such targets can be, e.g., static rotators (ground-based radars with rotating antenna), which yield detections in moving target indicator (MTI) radars. It is shown that these biases can be estimated in such a scenario, i.e., they meet the complete observability condition. Following this, the achievable accuracy for a generic scenario is evaluated. It is shown that accurate georegistration can be obtained even with a small number of measurements