Correlation between horizontal and vertical monopulse measurements

Many radar systems use the monopulse ratio to extract angle of arrival (AOA) measurements in both azimuth and elevation angles. The accuracies of each such measurement are reasonably well known: each measurement is, conditioned on the sum-signal return, Gaussian-distributed with calculable bias (relative to the true AOA), and variance. However, we note that the two monopulse ratios are functions of basic radar measurements that are not entirely independent, specifically in that the sum signal is common to both. The effect of this is that the monopulse ratios are dependent, and a simple explicit expression is given for their correlation; this is of considerable interest when the measurements are supplied to a tracking algorithm that requires a measurement covariance matrix. The system performance improvement when this is taken into account is quantified: while it makes little difference for a tracking radar with small pointing errors, there are more substantial gains when a target is allowed to stray within the beam, as with a rotating (track-while-scan) radar or when a single radar dwell interrogates two or more targets at different ranges. But in any case, the correct covariance expression is so simple that there is little reason not to use it. We additionally derive the Cramer-Rao lower bound (CRLB) on joint azimuth/elevation angle estimation and discover that it differs only slightly from the covariance matrix corresponding to the individual monopulse ratios. Hence, using the individual monopulse ratios and their simple joint accuracy expression is an adequate and quick approximation of the optimal maximum likelihood procedure for single resolved targets.     

Detecting the Presence of Target Multiplicity

A method is discussed for detecting the presence of multiple targets in the radar antenna beam. It is assumed that the targets are unresolvable in range, Doppler, and angle using conventional monopulse resolution techniques. The basic approach taken is a generalization of the "quadrature" method, with significantly enhanced performance in the case when multiple pulses are integrated into a single solution. Detection and false alarm probabilities are derived analytically and the receiver operating characteristics are graphed. This study was performed for application to angle processing in a frequency agile automatic tracking radar, but the underlying concept is general and has applications outside this area.     

Unresolved Rayleigh target detection using monopulse measurements

When the returns from two or more targets interfere (i.e., the signals are not resolved in the frequency or time domains) in a monopulse radar system, the direction-of-arrival (DOA) estimate indicated by the monopulse ratio can wander far beyond the angular separation of the targets. Generalized maximum likelihood (GML) detection of the presence of unresolved Rayleigh targets is developed with probability density functions (pdfs) conditioned on the measured amplitude of the target echoes. The Neyman-Pearson detection algorithm uses both the in-phase and quadrature portions of the monopulse ratio and requires no a priori knowledge of the signal-to-noise ratio (SNR) or DOA of either target. Receiver operating characteristic (ROC) curves are given along with simulation results that illustrate the performance and application of the algorithm     

Effect of Monopulse Signal Thresholding on Tracking Multiple Targets

The monopulse angle of arrival measured from two targets may wander far beyond the angular separation of the targets. In order to remove large errors, angle of arrival measurements are passed through a threshold detector and the measurements which do not satisfy the threshold are rejected. Thresholding has the tendency to move the mean indicated angle of arrival away from the stronger target and toward the power centroid of the targets, which may be undesirable in some applications. Expressions for the probability density function, the mean, and the variance of the in-phase angle of arrival are developed in this paper as a function of the threshold setting. Background noise and interfering signals are neglected in the analysis.     

Complex Indicated Angles Applied to Unresolved Radar Targets and Multipath

The off-axis angle indicated by a conventional monopulse radar is only the real part of a "complex indicated angle." The presence of unresolved targets or multipath distorts the real part (causing an erroneous angle indication) and also produces an imaginary part, which can easily be measured by processing the normally unused quadrature-phase component of the difference signal. Under certain conditions the angles, amplitude ratio, and relative phase of two unresolved targets can theoretically be determined by meas urements of the complex indicated angle on two pulses separated by a short interval. In the special case of multipath, known relationships between the unresolved target and image theoretically permit determination of target elevation with a single pulse.     

Bias compensation and tracking with monopulse radars in the presence of multi path

The problem of tracking targets in the presence of reflections from sea or ground is addressed. Both types of reflections (specular and diffuse) are considered. Specular reflection causes large peak errors followed by an approximately constant bias in the monopulse ratio, while diffuse reflection has random variations which on the average generate a bias in the monopulse ratio. Expressions for the average error (bias) in the monopulse ratio due to specular and diffuse reflections and the corresponding variance in the presence of noise in the radar channels are derived. A maximum maneuver-based filter and a multiple model estimator are used for tracking. Simulation results for five scenarios, typical of sea skimmers, with Swerling III fluctuating radar cross sections (RCSs) indicate the significance and efficiency of the technique developed in this paper-a 65% reduction of the rms error in the target height estimate.     

Maximum likelihood angle extractor for two closely spaced targets

In a scenario of closely spaced targets special attention has to be paid to radar signal processing. We present an advanced processing technique, which uses the maximum likelihood (ML) criterion to extract from a monopulse radar separate angle measurements for unresolved targets. This processing results in a significant improvement, in terms of measurement error standard deviations, over angle estimators using the monopulse ratio. Algorithms are developed for Swerling I as well as Swerling III models of radar cross section (RCS) fluctuations. The accuracy of the results is compared with the Cramer Rao lower bound (CRLB) and also to the monopulse ratio technique. A novel technique to detect the presence of two unresolved targets is also discussed. The performance of the ML estimator was evaluated in a benchmark scenario of closely spaced targets - closer than half power beamwidth of a monopulse radar. The interacting multiple model probabilistic data association (IMMPDA) track estimator was used in conjunction with the ML angle extractor     

Radar measurement extraction in the presence of sea-surface multipath

In the presence of sea-surface multipath monopulse radar signals from a low elevation target have three alternative paths in addition to the direct (radar-to-target) path due to reflections from the sea surface. The specular reflection causes significant signal fading. The diffuse reflection causes an approximately constant bias to the in-phase component of the monopulse ratio, which is the standard extractor of the direction of arrival (DOA) in the monopulse processing. The diffuse reflection also causes higher standard deviation to the in-phase component of the monopulse ratio. We propose a maximum likelihood (ML) angle extraction technique for low elevation targets of known average signal strength having a Rayleigh fluctuation. The results show that this method reduces the error of the estimated angle compared with the conventional monopulse ratio estimator. Subsequently, the ML angle extractor is modified for the unknown average signal strength case. This modified angle extractor has only a small performance degradation compared with the known average signal strength case, but it performs much better than the monopulse ratio based estimator. An algorithm to calculate the accuracy of the estimated angle (or height) is also presented. This angle extractor reduces the root-mean-square error (RMSE) by more than 50% in the signal processing stage when used in a low flying target tracking scenario. The same algorithm can be used to track sea skimmers.     

Monopulse-radar tracking of swerling III-IV targets using multiple observations

This paper proposes a novel statistical prediction of monopulse errors (Levanon, 1988) for a radar Swerling III-IV target embedded in noise or noise jamming where multiple observations are available. First, the study of the maximum likelihood estimator (MLE) of the complex monopulse ratio for a Swerling III-IV target embedded in spatially white noise allows us to extend the use of the MLE practical approximate form introduced by Mosca (1969) for Swerling 0-I-II cases. Afterward, we derive analytical formulas for both the mean and variance of the MLE in approximate form conditioned by the usual detection step performed on the sum channel of a monopulse antenna. Last, we provide a comparison of target direction of arrival (DOA) estimation performance based on monopulse ratio estimation as a function of the Swerling model in the context of a multifunction radar.     

Angle estimation for two unresolved targets with monopulse radar

Most present-day radar systems use monopulse techniques to extract angular measurements of sunbeam accuracy. The familiar "monopulse ratio" is a very effective means to derive the angle of a single target within a radar beam. For the simultaneous estimation of the angles of two closely-spaced targets, a modification on the monopulse ratio was derived in (Blair and Pearce, 2001), while (Sinha et al., 2002) presented a maximum likelihood (ML) technique via numerical search. In this paper it is shown that the ML solution can in fact be found explicitly, and the numerical search of ((Sinha et al., 2002) is unnecessary. However, the ML solution requires the signal to noise ratio (SNR) for each target to be known, and hence we generalize it so it requires only the relative SNR. Several versions of expectation maximization (EM) joint angle estimators are also derived, these differing in the degree to which prior information on SNR and on beam pattern are assumed. The performances of the different direction-of-arrival (DOA) estimators for unresolved targets are studied via Monte Carlo, and it is found that most have similar performance: this is remarkable since the use of prior information (SNR, relative SNR, beam pattern) varies widely between them. There is, however, considerable performance variability as a function of the two targets' off-boresight angles. A simple combined technique that fuses the results from different approaches is thus proposed, and it performs well uniformly.     

Tracking Performance of a Monopulse Radar in the Presence of Multiple Targets

The equations derived by A. J. Rainal for the probability density function of the angle error output of a monopulse radar excited by a Gaussian signal and Gaussian thermal noise are generalized to include the presence of multiple targets. The examples given demonstrate the radar's behavior for various combinations of target and noise parameters.     

Monopulse DOA estimation of two unresolved Rayleigh targets

This paper provides for new approaches to the processing of unresolved measurements as two direction-of-arrival (DOA) measurements for tracking closely spaced targets rather than the conventional single DOA measurement of the centroid. The measurements of the two-closely spaced targets are merged when the target echoes are not resolved in angle, range, or radial velocity (i.e., Doppler processing). The conditional Cramer Rao lower bound (CRLB) is developed for the DOA estimation of two unresolved Rayleigh targets using a standard monopulse radar. Then the modified CRLB is used to give insight into the boresight pointing for monopulse DOA estimation of two unresolved targets. Monopulse processing is considered for DOA estimation of two unresolved Rayleigh targets with known or estimated relative radar cross section (RCS). The performance of the DOA estimator is studied via Monte Carlo simulations and compared with the modified CRLB     

Varieties of Average Monopulse Responses to Multiple Targets

A monopulse receiver exhibits three apparently distinct types of average response when the radar sees two jammers, two passive targets, or one of each. This variety of response types is analyzed and shown to be consistent, i.e., the responses are shown to be special cases of a general formula which applies to two independent targets with uniformly distributed phase difference.     

High Range-Resolution Monopulse Tracking Radar

High range-resolution monopulse (HRRM) tracking radar which maintains wide instantaneous bandwidth through both range and angle error sensing channels provides range, azimuth, elevation, and amplitude for each resolved part of the target. The three-dimensional target detail can be used to improve and extend radar performance in several ways: for improved precision of target location, for target classification and recognition, to counter repeater-type ECM, to improve low-angle multipath tracking, to resolve multiple targets, as a miss-distance measurement capability, and for improved tracking in chaff and clutter. These have been demonstrated qualitatively except for the ECCM to repeater ECM and low-altitude tracking improvement. Initial results from an experimental HRRM radar with 3-ns pulse length show resolution of aircraft into its major parts and precise location of each resolved part accurately in range and angle. Realtime closed-loop tracking is performed on aircraft in flight using high-speed sampled, digitized, and processed HRRM range and angle video data. Clutter rejection capability is also demonstrated.     

Monopulse Radar Air-ti-Ground Ranging

The use of a two-lobe monopulse radar for measuring slant range to the surface of the earth in the absence of discrete targets is analyzed. It is shown that tracking dispersion can be considered as the resultant of two components. One component is independent of range and results from the finite pulse length and gate length and the random nature of the return signals. The other component is due to receiver noise and increases as the signal-to-noise ratio decreases. The dispersion component independent of range is shown to be proportional to the pulse length and tracking gate length. The variable dispersion is shown to be proportional to the five halves power of the range and the three halves power of the cotangent of the depression angle of the antenna boresight axis. Performance calculations for a specific radar are carried out and compared with experimental data.     

Adaptive digital beamforming for angle estimation in jamming

A radar digital beamforming (DBF) architecture and processing algorithm is described for nulling the signal from a mainlobe electronic jammer and multiple sidelobe electronic jammers while maintaining monopulse angle estimation accuracy on the target. The architecture consists of a sidelobe jamming (SLJ) cancelling adaptive array (AA) followed by a mainlobe jamming (MLJ) canceller. A mainlobe maintenance (MLM) technique or constrained adaptation during the sidelobe cancellation process is imposed so that the results of the SLJ cancellation process do not distort the subsequent mainlobe cancellation process. The SLJ signals and the MLJ signals are thus cancelled sequentially in separate processes. This technique was developed for improving radar processing in determining the angular location of a target, and specifically for improving the monopulse technique by maintaining the accuracy of the target echo monopulse ratio in the presence of electronic jamming by adaptive suppression of the jamming signals before forming the monopulse sum and difference beams     

Tracker and signal processing for the benchmark problem with unresolved targets

Radar signal processing is particularly important in tracking closely spaced targets and targets in the presence of sea-surface-induced multipath. Closely spaced targets can produce unresolved measurements when they occupy the same range cell of the radar. These issues are the salient features of the benchmark problem for tracking unresolved targets combined with radar management, for which this paper presents the only complete solution to date. In this paper a modified version of a recently developed maximum likelihood (ML) angle estimator, which can produce two measurements from a single (unresolved) detection, is presented. A modified generalized likelihood ratio test (GLRT) is also described to detect the presence of two unresolved targets. Sea-surface-induced multipath can produce a severe bias in the elevation angle measurement when the conventional monopulse ratio angle extractor method is used. A modified version of a recently developed ML angle extractor, which produces nearly unbiased elevation angle measurements and significantly improves the track accuracy, is presented. Efficient radar resource allocation algorithms for two closely spaced targets and targets flying close to the sea surface are also presented. Finally, the IMMPDAF (interacting multiple model estimator with probabilistic data association filter modules) is used to track these targets. It is found that a two-model IMMPDAF performs better than the three-model version used in the previous benchmark. Also, the IMMPDAF with a coordinated turn model works better than the one using a Wiener process acceleration model. The signal processing and tracking algorithms presented here, operating in a feedback manner, form a comprehensive solution to the most realistic tracking and radar management problem to date.     

Multiple Target Effects on Monopulse Signal Processing

Analysis of a typical amplitude-comparison monopulse angle-tracking radar shows that gain variation and bias in the radar error signal can occur under certain conditions involving multiple targets. The general behavior depends on the Doppler separation of the targets relative to system bandwidths; for a specific situation, the gain variation and bias are functions of the relative strengths of the targs. The analysis is shown to be consistent with experimental observations.     

非合作目标动态RCS仿真方法

针对非合作目标难以开展动态测量的问题,根据空气动力学原理提出了一种非合作目标动态雷达散射截面（RCS）仿真方法。该方法首先建立测量背景下典型飞行航路模型,然后计算雷达视线在机体坐标系上的时变姿态角。根据姿态角开展电磁计算,获得F-117A隐身攻击机在侧站平飞、背站拉起、对站俯冲、侧站盘旋4种航路下的动态RCS数据。着重分析了动、静态RCS特性在起伏目标检测性能评估上的差异。结果表明：静态RCS特性难以反映目标运动时真实的雷达特性,利用静态数据描述目标特性可能导致错误结论,而文中方法获取的动态RCS数据可以提高结论的完整性和可信度。