基于传动误差和齿面印痕控制的弧齿锥齿轮小轮加工参数的设计(英文)

This paper proposes a new approach to design pinion machine tool-settings for spiral bevel gears by controlling contact path and transmission errors. It is based on the satisfaction of contact condition of three given control points on the tooth surface. The three meshing points are controlled to be on a predesigned straight contact path that meets the pre-designed parabolic function of transmission errors. Designed separately, the magnitude of transmission errors and the orientation of the contact path are subjected to precise control. In addition, in order to meet the manufacturing requirements, we suggest to modify the values of blank offset, one of the pinion machine tool-settings, and redesign pinion ma- chine tool-settings to ensure that the magnitude and the geometry of transmission errors should not be influenced apart from minor effects on the predesigned straight contact path. The proposed approach together with its ideas has been proven by a numerical example and the manufacturing practice of a pair of spiral bevel gears.     

直纹面叶轮刀具轨迹规划的研究(英文)

At present, most commercial computer-aided manufacturing （CAM） systems are deficient in efficiency and performances on generating tool path during machining impellers. To solve the problem, this article develops a special software to plan cutting path for ruled surface impellers. An approximation algorithm to generate cutting path for machining integral ruled surface impellers is proposed. By fitting sampling data points of an impeller blade into a curve, a model of ruled surface blade of an impeller is built up. Furthermore, by calculating the points where the cutter axis vector intersects the free-form hub surface of an impeller, problems about, for instance, the ambiguity in calculation and machining the wide blade surface with a short flute cutter are solved. Finally, an integral impeller cutting path is planned by way of an integrated cutter location control algorithm. Simulation and machining tests with an impeller are performed on a 5-axis computer numerically controlled （CNC） mill machine, which shows the feasibility of the proposed algorithm.     

Realization Methodology of a 5-axis Spline Interpolator in an Open CNC System

By making use of the advantages of non-uniform rational B-spline （NURBS） curves to represent spatial curves, an instruction format with double NURBS curves suitable for 5-axis coordinated real-time interpolation is presented to replace the current 5-axis coordinated linear interpolation method defective in low-speed, low-accuracy and enormous numerical control （NC） files in sculptured surface machining. A generation procedure of the NC files with the presented format is introduced and the method to realize the interpolation in an open computer numerical control （CNC） system is developed by ourselves. These illustrated the feasibility of the proposed method and its capability of avoiding all the shortages of 5-axis linear interpolation method.     

Constructing G~2 Continuous Curve on Freeform Surface with Normal Projection

This article presents a new method for G～2 continuous interpolation of an arbitrary sequence of points on an implicit or parametric surface with prescribed tangent direction and curvature vector,respectively,at every point.First,a G～2 continuous curve is constructed in three-dimensional space.Then the curve is projected normally onto the given surface.The desired interpolation curve is just the projection curve,which can be obtained by numerically solving the initialvalue problems for a system of first-order ordinary differential equations in the parametric domain for parametric case or in three-dimensional space for implicit case.Several shape parameters are introduced into the resulting curve,which can be used in subsequent interactive modification so that the shape of the resulting curve meets our demand.The presented method is independent of the geometry and parameterization of the base surface.Numerical experiments demonstrate that it is effective and potentially useful in numerical control (NC) machining,path planning for robotic fibre placement,patterns design on surface and other industrial and research fields.     

An approach for machining distortion measurements and evaluation of thin-walled blades with small datum

Inspection techniques for aero-engine blades are a hot topic in industry. Since these blades have a sculptured surface and a small datum, measurement results may deviate from an actual position. There are few proper approaches compensating for non-uniform distribution errors that are within specified tolerance ranges. This study aimed to develop a meshing structure measur-ing approach for the distortion of blades via non-contact optical 3D scanning. A rough measure-ment and a registration procedure are initially adopted to rectify the coordinate system of a blade, which avoids the initial coordinate system errors caused by the small datum. A measurement path with meshing structure is then unfolded on the blade surface. For non-uniform distribution errors, the meshing structure measurement is more visual and clear than the traditional constant height curves method. All measuring points take only 7 min to complete, and the distribution of error is directly and accurately presented by the meshing structure. This study provides a basis for future research on distortion control and error compensation.     

A second-order numerical method for elliptic equations with singular sources using local flter

The presence of Dirac delta function in differential equation can lead to a discontinuity,which may degrade the accuracy of related numerical methods.To improve the accuracy,a secondorder numerical method for elliptic equations with singular sources is introduced by employing a local kernel flter.In this method,the discontinuous equation is convoluted with the kernel function to obtain a more regular one.Then the original equation is replaced by this fltered equation around the singular points,to obtain discrete numerical form.The unchanged equations at the other points are discretized by using a central difference scheme.1D and 2D examples are carried out to validate the correctness and accuracy of the present method.The results show that a second-order of accuracy can be obtained in the fltering framework with an appropriate integration rule.Furthermore,the present method does not need any jump condition,and also has extremely simple form that can be easily extended to high dimensional cases and complex geometry.     

A vision-based navigation approach with multiple radial shape marks for indoor aircraft locating

Since GPS signals are unavailable for indoor navigation, current research mainly focuses on vision-based locating with a single mark. An obvious disadvantage with this approach is that locating will fail when the mark cannot be seen. The use of multiple marks can solve this problem. However, the extra process to design and identify different marks will significantly increase system complexity. In this paper, a novel vision-based locating method is proposed by using marks with feature points arranged in a radial shape. The feature points of the marks consist of inner points and outer points. The positions of the inner points are the same in all marks, while the positions of the outer points are different in different marks. Unlike traditional camera locating methods （the PnP methods）, the proposed method can calculate the camera location and the positions of the outer points simultaneously. Then the calculation results of the positions of the outer points are used to identify the mark. This method can make navigation with multiple marks more efficient. Simulations and real world experiments are carried out, and their results show that the proposed method is fast, accurate and robust to noise.     

Periodic Error Compensation for Quartz MEMS Gyroscope Drift of INS

In order to improve the navigation accuracy of an inertial navigation system （INS）, composed of quartz gyroscopes, the existing real-time compensation methods for periodic errors in quartz gyroscope drift and the periodic error term relationship between sampled original data and smoothed data are reviewed. On the base of the results, a new compensation method called using former period characteristics to compensate latter smoothness data （UFCL for short） method is proposed considering the INS working characteristics. This new method uses the original data without smoothing to work out an error conversion formula at the INS initial alignment time and then compensate the smoothed data errors by way of the formula at the navigation time. Both theoretical analysis and experimental results demonstrate that this method is able to cut down on computational time and raise the accuracy which makes it a better real-time compensation approach for periodic error terms of quartz micro electronic mechanical system （MEMS） gyroscope＇s zero drift.     

Modeling of reliability and performance assessment of a dissimilar redundancy actuation system with failure monitoring

Actuation system is a vital system in an aircraft, providing the force necessary to move flight control surfaces. The system has a significant influence on the overall aircraft performance and its safety. In order to further increase already high reliability and safety, Airbus has imple-mented a dissimilar redundancy actuation system (DRAS) in its aircraft. The DRAS consists of a hydraulic actuation system (HAS) and an electro-hydrostatic actuation system (EHAS), in which the HAS utilizes a hydraulic source (HS) to move the control surface and the EHAS utilizes an elec-trical supply (ES) to provide the motion force. This paper focuses on the performance degradation processes and fault monitoring strategies of the DRAS, establishes its reliability model based on the generalized stochastic Petri nets (GSPN), and carries out a reliability assessment considering the fault monitoring coverage rate and the false alarm rate. The results indicate that the proposed reli-ability model of the DRAS, considering the fault monitoring, can express its fault logical relation and redundancy degradation process and identify potential safety hazards.     

PI controller relay auto-tuning using delay and phase margin in PMSM drives

This paper presents an auto-tuning method for a proportion plus integral（PI） controller for permanent magnet synchronous motor（PMSM） drives, which is supposed to be embedded in electro-mechanical actuator（EMA） control module in aircraft. The method, based on a relay feedback with variable delay time, explores different critical points of the system frequency response.The Nyquist points of the plant can then be derived from the delay time and filter time constant.The coefficients of the PI controller can then be obtained by calculation while shifting the Nyquist point to a specific position to obtain the required phase margin. The major advantage of the autotuning method is that it can provide a series of tuning results for different system bandwidths and damping ratios, corresponding to the specification for delay time and phase margin. Simulation and experimental results for the PMSM controller verify the performance of both the current loop and the speed loop auto-tuning.     

端点误差控制刀位算法的改进

 对端点误差控制数控加工刀位算法进行了改进：采用2个端点间偏置距离代替它们的参数差值用于衡量加工带宽和进行加工误差控制，提出了一种新的采用循环迭代计算刀具旋转角度的方法，并给出了格点法对偏置方向角进行优化的过程；使得算法不受具体的曲面参数化方式影响，简化了刀具定位时计算量，刀位得到了充分的优化。利用UG二次开发技术进行的实例计算表明：设置走刀方向沿着曲面的最小主曲率方向比沿着曲面的最大主曲率方向加工带宽更宽，前者应该是该算法的最优走刀方向，而且沿着最优方向走刀的优化刀位和多点切触加工算法得到的加工刀位一致,该算法也比多点切触加工算法有更大的适应性。     

复合材料缠绕后置处理方法研究

利用芯模表面的离散落纱点,依据空间几何和微分几何理论,针对纤维缠绕过程提出纤维缠绕出纱点轨迹的网格后置处理方法。该方法首先通过纤维缠绕轨迹的落纱点,以及缠绕过程中等悬纱长约束条件来求取出纱点,然后通过计算相邻出纱点的各坐标差得到机床运动轨迹,最后分别通过对三通管和组合回转体的缠绕成型实验,来验证该网格后置处理方法在处理非回转体和回转体缠绕出纱点轨迹的可行性和准确性。     

一种用NURBS表示的过渡曲面的生成方法

讨论在两参数曲面上生成显式定义的参数过渡曲面问题。提出了一种围绕两曲面的交线,采用参数化平面与曲面之一的等距面求交,寻找两曲面的等距点,以产生变半径过渡曲面的方法;过渡曲面本身为2次×3次NURBS曲面,充分利用了NURBS曲线可精确表示圆弧曲线的特点,并使得可用统一的算法对过渡曲面进行各种处理。     

圆筒状构件的多层铺丝路径生成算法

提出一种将空间曲线投影在芯模曲面上生成铺丝路径的方法以用于成型圆筒状复合材料构件.首先,在芯模外侧创建与铺丝路径相对应的特定曲线,然后将曲线按特定方向投影在指定的偏置曲面上,形成初始路径.为了使路径轨迹覆盖整个曲面,给出路径在曲面上的等距偏移方法.另外,对路径偏移中出现的缝隙给出了填补方法,并使偏移后的路径轨迹延伸至曲...     

Positioning method of a cylindrical cutter for ruled surface machining based on minimizing one-sided Hausdorff distance

Motivated by the definition of the machining errors induced by tool path planning methods, a mapping curve of the tool axis of a cylindrical cutter is constructed on the tool surface.The mapping curve is a typical one that can be used to express the closeness between the tool surface and the surface to be machined. A novel tool path planning method is proposed for flank or plunge milling ruled surfaces based on the minimization of the one-sided Hausdorff distance(HD) from the mapping curve to the surface to be machined. It is a nonlinear optimization problem in best uniform approximation(BUA) or Chebyshev sense. A mathematical programming model for computing the minimum one-sided HD is proposed. The linearization method of the programming model is provided and the final optimal solutions are obtained by simplex method. The effectiveness of the proposed BUA method is verified by two numerical examples and compared with the least squares(LS) and double point offset(DPO) methods. The variation in tool orientation induced by the optimization of the tool positions is also evaluated.     

复合材料自动铺带技术研究(Ⅰ)——"自然路径"特性分析及算法

分析了可展面上“自然路径”的几何本质，推演证明其在可展曲面上与测地线的等价性。应用和拓展可展面“自然路径”数值算法，在一般曲面上引入边界控制点调整预浸带中心点以减小预浸带变形、实现铺放，构造了一般曲面“自然路径”求解格式。     

一种基于点搜索的叶轮清根轨迹生成方法(英文)

清根区域的加工质量严重影响着叶轮的工作性能。为了快速地规划出清根加工刀位轨迹并获得较好的表面加工质量,提出了一种基于点搜索的叶轮清根轨迹生成方法。本文中的清根加工主要包括利用球头刀对自由曲面叶轮进行单刀清根和多刀清根。对于单刀清根,刀心位置通过判断其是否满足距离准则来确定。在确定了搜索方向和追踪方向后,借助于点搜索算法,得到所有切触点,刀位点以及清根边界,从而生成刀位轨迹。基于单刀清根的原理,提出了一种分层多刀清根的方法,清根刀具半径小于清根圆角设计半径。使用一系列中间虚拟刀具将清根区域分成若干层,给定最后一层的残留高度,然后计算出所有刀位轨迹。最后给出了仿真实例,结果证明了所提方法的可行性。     

复合材料自动铺带技术研究(I)——“自然路径”特性分析及算法

分析了可展面上“自然路径”的几何本质,推演证明其在可展曲面上与测地线的等价性。应用和拓展可展面“自然路径”数值算法,在一般曲面上引入边界控制点调整预浸带中心点以减小预浸带变形、实现铺放,构造了一般曲面“自然路径”求解格式。     

高级曲面设计功能的算法原理及实现

论述了国产化软件BSURF-GI交互式曲面造型系统中高级曲面设计功能的算法原理及其实现途径。提出了一种能沿曲面与曲面交线和过渡曲面边界线进行曲面裁剪的算法,指出了该系统今后进一步研究的方向及与实体造型系统集成的途径。为解决曲面与曲面求交算法中自动给出Newton-Raphson迭代法初值的优选难问题,本文还提出了一种有效的自动优选初值的方法——面积映射法。最后给出了一些高级曲面功能图例。