基于模型的多电飞机能源优化特性仿真分析

多电飞机是一种用电能部分取代原来的液压能和气压能的飞机,其二次能源系统以电能为主。为实现多电飞机能源系统的优化设计,将飞机的发电、配电和用电集成在一个统一的系统内,实行发电、配电和用电的统一规划、统一管理和集中控制。为快速有效地分析多电飞机能源系统优化特性,本文采用基于模型的系统工程方法论,针对多电飞机能源优化仿真分析平台开展研究,提出了一种面向电气设备的多物理域模型建模方法,以实现机载系统的大规模集成仿真。并以飞控系统为对象,建立了多电飞机飞控系统和传统飞机飞控系统的能量利用、能量传送、能量变换设备等仿真模型,仿真分析了两种飞控系统的能源应用特性,为多电飞机能源系统的优化设计提供了有效支撑。     

基于第二动力技术的TBCC综合能源展望

飞行器电能、液压能和气压能的功率需求由第二动力系统单独做功或提取发动机主轴功率供应。TBCC发动机模态转换后,第二动力系统无法从发动机主轴提取功率。因此,需要解决空天飞行器第二动力系统长时间大功率能量输出的问题。分析航空蓄电池、起动发电机、APU、GTS、ATS和RAT的技术特点、发展现状以及第二动力的发展趋势,结合高超声速飞行器的发展趋势,提出ATS/RAT组合和多电超导发动机/大比能的储能装置技术组合是实现空天高超声速飞行器综合能源的技术路线。     

A novel integrated self-powered brake system for more electric aircraft

Traditional hydraulic brake systems require a complex system of pipelines between an aircraft engine driven pump (EDP) and brake actuators, which increases the weight of the aircraft and may even cause serious vibration and leakage problems. In order to improve the reliability and safety of more electric aircraft (MEA), this paper proposes a new integrated self-powered brake system (ISBS) for MEA. It uses a hydraulic pump geared to the main wheel to recover a small part of the kinetic energy of a landing aircraft. The recovered energy then serves as the hydraulic power supply for brake actuators. It does not require additional hydraulic source, thus removing the pipelines between an EDP and brake actuators. In addition, its self-powered characteristic makes it possible to brake as usual even in an emergency situation when the airborne power is lost. This paper introduces the working principle of the ISBS and presents a prototype. The mathematical models of a taxiing aircraft and the ISBS are established. A feedback linearization control algorithm is designed to fulfill the anti-skid control. Simulations are carried out to verify the feasibility of the ISBS, and experiments are conducted on a ground inertia brake test bench. The ISBS presents a good performance and provides a new potential solution in the field of brake systems for MEA.     

多电飞机作动系统的体系结构优化(英文)

多电技术的深入发展使得飞机上可选择的功率源和作动器种类越来越多,这导致在机载作动系统体系结构优化设计过程中出现了不同功率源和作动器组合的极端复杂性,传统的"试凑"法已无法完成设计任务。首先介绍了多电飞机飞控作动系统(Flight Control Actuation System,FCAS)的组成,计算了其可能的体系结构数量;其次提出了FCAS体系结构在安全性、重量和效率方面的评价指标,计算了全机各舵面均采用同类作动器时的评价指标值;最后对比分析了现有的各种多目标优化算法,采用遗传算法给出了多电飞机FCAS体系结构的多目标优化设计结果。对比传统的只采用阀控液压伺服作动器的作动系统体系结构,优化后的体系结构可以在满足安全可靠性要求的前提下使系统的重量减轻6%左右,效率提高30%左右。     

飞机电源系统故障诊断专家系统的分析和设计

应用人工智能理论对某型飞机电源系统进行故障诊断分析。本文给出励磁电流过大故障树模型,建立电源系统知识库和推理机,完成飞机电源系统故障诊断专家系统的设计,进行故障诊断,得出异常或故障信息,为整个飞机非航电系统采用专家系统进行故障诊断提供经验。     

超轻型电动飞机电动力系统的参数匹配

结合某型超轻型电动飞机的设计参数,阐述了电动力系统的布局、系统参数匹配的原则和步骤.提出了电动力系统参数匹配和性能验证的方法.从动力性、经济性、系统质量的角度验证了该系统的可行性.参考飞机的最大平飞速度为175.5km/h,大于设计要求的最大平飞速度170km/h,满足动力性能要求.电动力系统的运行费用为6.8元/h,是相近功率活塞发动机运行费用的1/8.与3种电动飞机相比,参考机型的功质比仍比较高,达0.0842kW/kg,为可接受值.      

Notes on `The electric control of large aeroplanes'

The author examines a proposal published by D.T. Glass-Hooper (see Flight, Dec. 21, 1916) for controlling an aircraft using solenoids. He than discusses the control systems used almost universally in aircraft through the end of WWII, and the gradual evolution to almost all-electrical flight control (the hydraulic actuator is the last major nonelectrical element). Laboratory testing of electric actuators is considered and the C-141 Aileron electric actuation system is presented. The High Technology Test Bed program, which was implemented to provide a research aircraft for the development and evaluation of aerodynamic, avionic, and flight control system concepts, is described     

多电飞机混合储能系统的设计与仿真

多电飞机直流配电系统是电功率传输的核心,由于涡轮电机的单向性,系统并不完全可逆。为了维持直流汇流条的稳定、提高能源效率,需建立相应的存储和消耗系统。研究了一种带有超级电容器的多电飞机储能系统,分析了该系统中超级电容器的作用及其控制策略,根据超级电容器本身的特性利用Matlab/Simulink软件建立相应仿真模型,并针对于飞机电网突加和突卸负载时电压不同状态设计了相应控制策略,通过仿真实验验证了带有超级电容器的混合储能系统的有效性。     

Power management and distribution system for a more-electricaircraft (MADMEL)

A five-phase Power Management and Distribution System for a More-Electric Aircraft (MADMEL) program was awarded by the Air Force to Northrop/Grumman Military Aircraft Division in September 1991. The objective of the program is to design, develop, and demonstrate an advanced electrical power generation and distribution system for a More-Electric Aircraft (MEA). The MEA emphasizes the use of electrical power in place of hydraulics, pneumatic, and mechanical power to optimize the performance and life cycle cost of the aircraft. This paper presents an overview of the MADMEL program and a top-level summary of the program results, development and test of major components to date. In Phase I and Phase II studies, the electrical load requirements were established and the electrical power system architecture was defined for both near-term (NT-year 1996) and far-term (FT-year 2003) MEA application. The detailed design and specification for the Electrical Power System (EPS), its interface with the Vehicle Management System, and the test set-up were developed under Phase III. Phase IV, fabrication and testing of the subsystem level hardware, has been completed. Overall system level integration and testing, Phase V, is scheduled to be completed by September 1999     

高温燃油对航空发动机控制系统的影响分析

随着新一代飞机性能的提高,燃油成为飞机的主要热沉,承担巨大的散热压力,导致发动机进口燃油温度大幅提高.为了保证发动机控制系统在高温燃油环境下的控制品质和工作可靠性,针对高温燃油的特性变化对发动机控制性能的影响进行了分析,同时分析了高温燃油对液压机械装置、电气元件和发动机滑油系统的影响,给出了燃油温度限制的参考值.研究结果表明,必须对燃油温度进行限制才能保证发动机控制系统在高温燃油环境下正常工作.     

The All-Electric Fighter Airplane Flight Control Issues, Capabilities, and Projections

The prime issues raised in any all-electric airplane discussion are (1) is the electric power system as reliable and trustworthy as a hydraulic power system; (2) can electromechanical flight control actuators perform satisfactorily, i.e., can the performance match that of hydraulic actuators; (3) can redundant electromechanical actuation systems (EMAS) be designed to equal the flight safety reliability of dual tandem hydraulic actuators; and (4) can satisfactory solutions be found or developed for dissipating the heat generated in actuators and power controllers. The first question should be inconsequential since it is assumed that the all-electric aircraft will be equipped with a fly-by-wire (FBW) flight control system (FCS) which is already dependent upon an uninterrupted supply of electrical power. Design studies and hardware already developed show that the answer to question (2) is that EMAS outperform hydraulic actuators, particularly under load. The answer to question (3) is not as clear primarily because the issue has not been addressed in any depth. As posed the answer must be yes, but with the proviso that the weight might be greater than currently predicted. Studies have shown that we can cope with the heat dissipation issue addressed in question (4) in the case of motors and inverter/power controllers. The projections regarding usage of EMAS and the future of the all-electric airplane must be based on the type of vehicle (small subsonic transport, large transport, or military tighter) and the economics involved.     

旋转帽罩电加热防冰瞬态过程研究

基于欧拉两相流理论,对旋转帽罩水滴撞击特性进行了数值模拟,提出了旋转部件表面对流换热计算方法,并基于改进Messinger结冰模型开发了旋转帽罩电热防冰计算程序,对旋转帽罩瞬态防冰过程进行了数值模拟研究.结果表明:旋转运动对旋转帽罩表面对流换热起到增强作用,且在供给相同加热热流密度时转速越大,防冰表面温度越低;防冰系统启动阶段,旋转帽罩表面会发生结冰和冰脱落现象,考虑结冰过程后系统的响应时间缩短;当电加热功率相同时,周期电加热防冰方式更为节能;当电加热能耗相同时,周期电加热方式系统响应更快.     

电传飞行控制作动系统

YF-23A战斗机具有极大的静不安定性,在不开加力的情况下可以实现超声速巡航,其设计目标是在亚声速和超声速均具有优于对手的机动能力,上述要求使得飞行控制作动系统必须具有空前的能力和性能。其独特的飞行和机动包线要求其作动系统在低速时具有高的舵面偏转速率和大的行程,在超声速时要具有附加铰链力矩输出能力,为实现上述目标,开发出具有液压与电能守恒的作动系统。     

基于多电飞机的先进供电技术研究

阐述了多电飞机的特征,对多电飞机供电系统先进技术进行了研究,探讨了基于多电飞机的电气系统结构、电源系统、配电系统、负载自动管理技术等。     

并联混合动力齿轮传动涡扇发动机建模与性能分析

为对比探究未来大推力航空混合动力系统与传统航空发动机的优劣,本文依托某概念型齿轮传动涡扇(Geared turbofan,GTF)发动机,设计了一个并联航空油-电混合动力系统(hybrid GTF,hGTF),在Matlab /Simulink数字仿真软件中建立相匹配的电动力模型以及氮氧化物NOx排放和噪声预测等性能参数计算模型,并在稳态和飞行任务剖面下初步分析了电动力系统的引入对原基线GTF发动机的性能改变状况。稳态仿真结果表明,大推力等级的并联油-电混合动力系统中,至少需要兆瓦级的电动力系统进行匹配;当电动力系统处于电动模式时,可能会带来低压压气机喘振的隐患;当电动力系统处于再生模式时,电能源相当于经过了电能到机械能再到电能的二次效率损失,不建议采用。飞行任务剖面动态仿真结果表明,相比于传统GTF发动机,hGTF推进系统的燃油消耗率最高下降15%,总燃油消耗节省8.3%, NOx总排放量减少18.8%,各部件起飞噪声总声压级减少1.5~3.3dB。分析结果表明采用并联混合动力系统具有显著提升省油、减排效果的能力,同时也具有一定的降噪潜力。     

基于可用能的多电飞机能量利用率分析方法

为了分析复杂多电飞机系统的能量使用情况,将模块化系统建模与可用能分析方法相结合构造出一种能量利用率分析方法。利用该方法将多电飞机系统分成动力、电力、液压、机体、防冰除冰、环境控制和座舱等子系统,在完整巡航任务剖面内计算各子系统可用能的分配和使用情况,分析相同飞行状态下不同子系统以及相同子系统在不同飞行状态下的能量利用率。所采用的燃料可用能计算公式不仅考虑了化学能还考虑了燃烧状态的影响。结果显示,多电飞机中可用能损失主要发生在发动机中,液压作动系统紧随其次;防冰除冰单元在飞机盘旋阶段的可用能效率较低,在起飞着陆阶段效率较高。     

Reliable electro-mechanical actuators in aircraft

There is a general trend in the aerospace industry toward increasing the use of electrically-powered equipment. This trend is usually referred to as "Power-by-Wire" in the "More Electric Aircraft" (MEA) concept and it leads, among others, to the substitution of hydraulic actuators by Electro-Mechanical Actuators (EMA). Its benefits are a decrease in maintenance effort and weight, and an increase in efficiency. However, jamming case obstacles stop the massive use of EMAs in flight-control actuators. The aim herein is to introduce the safety needs of electro-mechanical actuators in aircraft applications, and Its major goal is to present the suitability and reliability of such actuator systems, including electric motors and power converters.     

分布式电推进飞机动力系统评估优化方法

以电推进飞机的动力系统作为研究对象,开展了以下研究工作：采用电力系统潮流计算方法,分析了采用高压直流供电体制的分布式电推进飞机电气系统,模拟了其在稳定运行状态与断路故障状态下的能量流动关系,同时分析了直流电压等级对电气系统的影响。搭建了完整的分布式电推进飞机动力系统仿真模型,依据基于时间和基于高度的飞行剖面,对比分析了纯电推进与涡轮电推进架构在推进功率、推进效率与航程3个评价指标上的优劣。建立了动力系统典型部件的参数化模型,并使用符号规划算法对建立的参数化模型进行了优化计算,比较了传统涡轮推进与涡轮电推进架构下动力系统质量与燃油消耗率间的优化权衡关系。研究结果为分布式电推进飞机混合动力系统的设计提供了有价值的正向设计方法。     

Higher Voltage Aircraft Power Systems

Modern aircraft designs are focused on minimising the use of engine bleed air, eliminating gearboxes, and reducing the reliance on hydraulic systems. Instead, many of these mechanical systems will be replaced with electrical versions. The increasing amounts of electrical power that will be shipped through an aircraft means that it is increasingly difficult to rely on low voltage power systems owing to voltage drop and weight constraints. This discusses the challenges that relate to the safe use of higher voltage systems within aircraft.