Adaptive dynamic surface control of NSVs with input saturation using a disturbance observer

An adaptive dynamic surface control(DSC)scheme is proposed for the multi-input and multi-output(MIMO)attitude motion of near-space vehicles(NSVs)in the presence of external disturbance,system uncertainty and input saturation.The external disturbance and the system uncertainty are efficiently tackled using a Nussbaum disturbance observer(NDO),and the adaptive controller is constructed by combining the dynamic surface control technique to handle the problem of‘‘explosion of complexity’’inherent in the conventional backstepping method.For handling the input saturation,an auxiliary system is designed with the same order as that of the studied MIMO attitude system.Using the error between the saturation input and the desired control input as the input of the designed auxiliary system,a series of signals are generated to compensate for the effect of the saturation in the dynamic surface control design.It is proved that the developed control scheme can guarantee that all signals of the closed-loop control system are semi-globally uniformly bounded.Finally,simulation results illustrate that the proposed control scheme can achieve satisfactory tracking performance under the composite effects of the input saturation and the external disturbance.     

An experimental system for release simulation of internal stores in a supersonic wind tunnel

Aerodynamic parameters obtained from separation experiments of internal stores in a wind tunnel are significant in aircraft designs. Accurate wind tunnel tests can help to improve the release stability of the stores and in-flight safety of the aircrafts in supersonic environments.A simulative system for free drop experiments of internal stores based on a practical project is provided in this paper. The system contains a store release mechanism, a control system and an attitude measurement system. The release mechanism adopts a six-bar linkage driven by a cylinder, which ensures the release stability. The structure and initial aerodynamic parameters of the stores are also designed and adjusted. A high speed vision measurement system for high speed rolling targets is utilized to measure the pose parameters of the internal store models and an optimizing method for the coordinates of markers is presented based on a priori model. The experimental results show excellent repeatability of the system, and indicate that the position measurement precision is less than0.13 mm, and the attitude measurement precision for pitch and yaw angles is less than 0.126°, satisfying the requirements of practical wind tunnel tests. A separation experiment for the internal stores is also conducted in the FL-3 wind tunnel of China Aerodynamics Research Institute.     

Composite control method for stabilizing spacecraft attitude in terms of Rodrigues parameters

In this paper, the attitude stabilization problem of a rigid spacecraft described by Rodrigues parameters is investigated via a composite control strategy, which combines a feedback control law designed by a finite time control technique with a feedforward compensator based on a linear disturbance observer (DOB) method. By choosing a suitable coordinate transformation, the spacecraft dynamics can be divided into three second-order subsystems. Each subsystem includes a certain part and an uncertain part. By using the finite time control technique, a continuous finite time controller is designed for the certain part. The uncertain part is considered to be a lumped disturbance, which is estimated by a DOB, and a corresponding feedforward design is then implemented to compensate the disturbance. Simulation results are employed to confirm the effectiveness of the proposed approach.     

刚体航天器姿态跟踪的时变滑模控制(英文)

To solve the problem of attitude tracking of a rigid spacecraft with an either known or measurable desired attitude trajectory, three types of time-varying sliding mode controls are introduced under consideration of control input constraints. The sliding surfaces of the three types initially pass arbitrary initial values of the system, and then shift or rotate to reach predetermined ones. This way, the system trajectories are always on the sliding surfaces, and the system work is guaranteed to have robustness against parameter uncertainty and external disturbances all the time. The controller parameters are optimized by means of genetic algorithm to minimize the index consisting of the weighted index of squared error （ISE） of the system and the weighted penalty term of violation of control input constraint. The stability is verified with Lyapunov method. Compared with the conventional sliding mode control, simulation results show the proposed algorithm having better robustness against inertia matrix uncertainty and external disturbance torques.     

H∞ output tracking control for flight control systems with time-varying delay

For flight control systems with time-varying delay, an H∞ output tracking controller is proposed. The controller is designed for the discrete-time state-space model of general aircraft to reduce the effects of uncertainties of the mathematical model, external disturbances, and bounded time-varying delay. It is assumed that the feedback-control loop is closed by the communication network, and the network-based control architecture induces time-delays in the feedback information. Suppose that the time delay has both an upper bound and a lower bound. By using the Lyapu- nov-Krasovskii function and the linear matrix inequality （LMI）, the delay-dependent stability criterion is derived for the time-delay system. Based on the criterion, a state-feedback H∞ output tracking controller for systems with norm-bounded uncertainties and time-varying delay is presented. The control scheme is applied to the high incidence research model （HIRM）, which shows the effectiveness of the proposed approach.     

Disturbance observer based actor-critic learning control for uncertain nonlinear systems

This paper investigates the disturbance observer based actor-critic learning control for a class of uncertain nonlinear systems in the presence of unmodeled dynamics and time-varying disturbances. The proposed control algorithm integrates a filter-based design method with actor-critic learning architecture and disturbance observer to circumvent the unmodeled dynamic and the timevarying disturbance. To be specific, the actor network is employed to estimate the unknown system dynamic, the critic n...     

PREDICTIVE VARIABLE STRUCTURE CONTROL FOR A CLASS OF NONLINEAR SYSTEM

Nonlinear sliding mode predictive controller is designed for a class of nonlinear system with unmodeled dynamic characteristics and nonlinear term. The method is based on nonlinear optimal predictive control. The variable structure control law minimizes the quadratic index of a predictive sliding mode, which contains the cost function of control preventing the control effect from saturation for in most practical implementation the control inputs are bounded by physical constraints and energy constraints. According to the immeasurable states, the variable structure observer for nonlinear systems is adapted. The variable structure system method is apt to the realization of observer with variable parameters and uncertainty. The proof shows that the states of the observer asymptotically convergence to the real states of the system although it is of uncertainty and nonlinear terms. Finally, the digital simulation results prove the effectiveness of the proposed method.     

Decentralized adaptive sliding mode control of a space robot actuated by control moment gyroscopes

An adaptive sliding mode control(ASMC) law is proposed in decentralized scheme for trajectory tracking control of a new concept space robot.Each joint of the system is a free ball joint capable of rotating with three degrees of freedom(DOF).A cluster of control moment gyroscopes(CMGs) is mounted on each link and the base to actuate the system.The modified Rodrigues parameters(MRPs) are employed to describe the angular displacements,and the equations of motion are derived using Kane's equations.The controller for each link or the base is designed separately in decentralized scheme.The unknown disturbances,inertia parameter uncertainties and nonlinear uncertainties are classified as a ‘‘lumped" matched uncertainty with unknown upper bound,and a continuous sliding mode control(SMC) law is proposed,in which the control gain is tuned by the improved adaptation laws for the upper bound on norm of the uncertainty.A general amplification function is designed and incorporated in the adaptation laws to reduce the control error without conspicuously increasing the magnitude of the control input.Uniformly ultimate boundedness of the closed loop system is proved by Lyapunov's method.Simulation results based on a three-link system verify the effectiveness of the proposed controller.     

Autonomous attitude coordinated control for spacecraft formation with input constraint,model uncertainties,and external disturbances

To synchronize the attitude of a spacecraft formation flying system, three novel autonomous control schemes are proposed to deal with the issue in this paper. The first one is an ideal autonomous attitude coordinated controller, which is applied to address the case with certain models and no disturbance. The second one is a robust adaptive attitude coordinated controller, which aims to tackle the case with external disturbances and model uncertainties. The last one is a filtered robust adaptive attitude coordinated controller, which is used to overcome the case with input con- straint, model uncertainties, and external disturbances. The above three controllers do not need any external tracking signal and only require angular velocity and relative orientation between a spacecraft and its neighbors. Besides, the relative information is represented in the body frame of each spacecraft. The controllers are proved to be able to result in asymptotical stability almost everywhere. Numerical simulation results show that the proposed three approaches are effective for attitude coordination in a spacecraft formation flying system.     

Attitude synchronization for multiple spacecraft with input constraints

The attitude synchronization problem for multiple spacecraft with input constraints is investigated in this paper. Two distributed control laws are presented and analyzed. First, by intro- ducing bounded function, a distributed asymptotically stable control law is proposed. Such a con- trol scheme can guarantee attitude synchronization and the control inputs of each spacecraft can be a priori bounded regardless of the number of its neighbors. Then, based on graph theory, homoge- neous method, and Lyapunov stability theory, a distributed finite-time control law is designed. Rig- orous proof shows that attitude synchronization of multiple spacecraft can be achieved in finite time, and the control scheme satisfies input saturation requirement. Finally, numerical simulations are presented to demonstrate the effectiveness and feasibility of the oroDosed schemes.     

DOA estimation for attitude determination on communication satellites

In order to determine an appropriate attitude of three-axis stabilized communication satellites, this paper describes a novel attitude determination method using direction of arrival （DOA） estimation of a ground signal source. It differs from optical measurement, magnetic field measurement, inertial measurement, and global positioning system （GPS） attitude determination. The proposed method is characterized by taking the ground signal source as the attitude reference and acquiring attitude information from DOA estimation. Firstly, an attitude measurement equation with DOA estimation is derived in detail. Then, the error of the measurement equation is analyzed. Finally, an attitude determination algorithm is presented using a dynamic model, the attitude measurement equation, and measurement errors. A developing low Earth orbit （LEO） satellite which tests mobile communication technology with smart antennas can be stabilized in three axes by corporately using a magnetometer, reaction wheels, and three-axis magnetorquer rods. Based on the communication satellite, simulation results demonstrate the effectiveness of the method. The method could be a backup of attitude determination to prevent a system failure on the satellite. Its precision depends on the number of snapshots and the input signal-to-noise ratio （SNR） with DOA estimation.     

Super twisting controller for on-orbit servicing to non-cooperative target

A relative position and attitude coupled controller is proposed for rendezvous and docking between two docking ports located in different spacecraft. It is concerned with servicing to a tumbling non-cooperative target spacecraft in arbitrary orbit subjected to external disturbances.By considering both kinematic and dynamical coupled effects of relative rotation on relative translation, a coupled dynamic model is established to represent the relative motion of docking port on target spacecraft with respect to another on the service spacecraft. The spacecraft control is based on the second order sliding mode algorithm of super twisting(ST). It is schemed to manipulate the relative position and attitude synchronously. A formal proof of the finite time convergence property of the closed-loop system is derived theoretically by the second method of Lyapunov. Numerical simulations with the designed ST controller are presented to validate the analytic analysis by contrast with the twisting control algorithm. Simulation results demonstrate that the proposed relative position and attitude integrated controller is characterized by high precision, strong robustness and high reliability.     

Backstepping design of missile guidance and control based on adaptive fuzzy sliding mode control

This paper presents an integrated missile guidance and control law based on adaptive fuzzy sliding mode control. The integrated model is formulated as a block-strict-feedback nonlinear system, in which modeling errors, unmodeled nonlinearities, target maneuvers, etc. are viewed as unknown uncertainties. The adaptive nonlinear control law is designed based on backstepping and sliding mode control techniques. An adaptive fuzzy system is adopted to approximate the coupling nonlinear functions of the system, and for the uncertainties, we utilize an online-adaptive control law to estimate the unknown parameters. The stability analysis of the closed-loop system is also conducted. Simulation results show that, with the application of the adaptive fuzzy sliding mode control, small miss distances and smooth missile trajectories are achieved, and the system is robust against system uncertainties and external disturbances.     

Model reference adaptive control with smooth switching scheme for piecewise linear systems and its application in turbofan engine control

A model reference adaptive control (MRAC) with smooth switching scheme was proposed for piecewise linear systems, and the method was utilized in turbofan engine control to avoid the discontinuity of control input. In this scheme, each sub-region of the operating envelope had its own MRAC controller, and smooth indicator function based smooth switching scheme was introduced to switch multiple controllers smoothly at the boundary of adjacent sub-regions. The Lyapunov stability analysis indicated that the proposed smooth switching scheme can guarantee the convergence of the closed-loop system during the controllers switching. The tracking error system was converted into a switched system to analyze the global stability of the closed-loop system. The advantage of the method was that the chattering of system output and instability caused by asynchronous switching can be eliminated. The simulation illustrates the effectiveness of the proposed control scheme in comparison with the existing MRAC controller with gain scheduling for turbofan engine.      

Adaptive sliding mode control of the A-axis used for blisk manufacturing

As a key assembly in the 5-axis CNC machine tools, positioning precision of the A-axis directly affects the machining accuracy and surface quality of the parts. First of all, mechanical structure and control system of the A-axis are designed. Then, considering the influence of nonlin- ear friction, backlash, unmodeled dynamics, uncertain cutting force and other external disturbance on the control precision of the A-axis, an adaptive sliding mode control （ASMC） based on extended state observer （ESO） is proposed. ESO is employed to estimate the state variables of the unknown system and an adaptive law is adopted to compensate for the input dead-zone caused by friction, backlash and other nonlinear characteristics. Finally, stability of the closed-loop system is guaran- teed by the Lyapunov theory. Positioning experiments illustrate the perfect estimation of ESO and the stronger anti-interference and robustness of ASMC, which can improve the control precision of the A-axis by about 40 times. Processing experiments show that the ASMC can reduce the waviness, averaKe error and roughness of the nrocessed surface by 35.63%, 31.31% and 30.35%, respectively.     

Simultaneous state and actuator fault estimation for satellite attitude control systems

In this paper, a new nonlinear augmented observer is proposed and applied to satellite attitude control systems. The observer can estimate system state and actuator fault simultaneously. It can enhance the performances of rapidly-varying faults estimation. Only original system matrices are adopted in the parameter design. The considered faults can be unbounded, and the proposed augmented observer can estimate a large class of faults. Systems without disturbances and the fault whose finite times derivatives are zero piecewise are initially considered, followed by a discussion of a general situation where the system is subject to disturbances and the finite times derivatives of the faults are not null but bounded. For the considered nonlinear system, convergence conditions of the observer are provided and the stability analysis is performed using Lyapunov direct method. Then a feasible algorithm is explored to compute the observer parameters using linear matrix inequalities (LMIs). Finally, the effectiveness of the proposed approach is illustrated by considering an example of a closed-loop satellite attitude control system. The simulation results show satisfactory perfor-mance in estimating states and actuator faults. It also shows that multiple faults can be estimated successfully.     

Singular formalism and admissible control of spacecraft with rotating flexible solar array

This paper is concerned with the attitude control of a three-axis-stabilized spacecraft which consists of a central rigid body and a flexible sun-tracking solar array driven by a solar array drive assembly. Based on the linearization of the dynamics of the spacecraft and the modal identi- ties about the flexible and rigid coupling matrices, the spacecraft attitude dynamics is reduced to a formally singular system with periodically varying parameters, which is quite different from a space- craft with fixed appendages. In the framework of the singular control theory, the regularity and impulse-freeness of the singular system is analyzed and then admissible attitude controllers are designed by Lyapunov＇s method. To improve the robustness against system uncertainties, an H∞ optimal control is designed by optimizing the H∞ norm of the system transfer function matrix. Comparative numerical experiments are performed to verify the theoretical results.     

Attitude coordination for spacecraft formation with multiple communication delays

Communication delays are inherently present in information exchange between spacecraft and have an effect on the control performance of spacecraft formation. In this work, attitude coordination control of spacecraft formation is addressed, which is in the presence of multiple communication delays between spacecraft. Virtual system-based approach is utilized in case that a constant reference attitude is available to only a part of the spacecraft. The feedback from the virtual systems to the spacecraft formation is introduced to maintain the formation. Using backstepping control method, input torque of each spacecraft is designed such that the attitude of each spacecraft converges asymptotically to the states of its corresponding virtual system. Furthermore, the backstepping technique and the Lyapunov–Krasovskii method contribute to the control law design when the reference attitude is time-varying and can be obtained by each spacecraft. Finally, effectiveness of the proposed methodology is illustrated by the numerical simulations of a spacecraft formation.     

Adaptive block dynamic surface control for integrated missile guidance and autopilot

A novel integrated guidance and autopilot design method is proposed for homing missiles based on the adaptive block dynamic surface control approach. The fully integrated guidance and autopilot model is established by combining the nonlinear missile dynamics with the nonlinear dynamics describing the pursuit situation of a missile and a target in the three-dimensional space. The integrated guidance and autopilot design problem is further converted to a state regulation problem of a time-varying nonlinear system with matched and unmatched uncertainties. A new and simple adaptive block dynamic surface control algorithm is proposed to address such a state regulation problem. The stability of the closed-loop system is proven based on the Lyapunov theory. The six degrees of freedom (6DOF) nonlinear numerical simulation results show that the proposed integrated guidance and autopilot algorithm can ensure the accuracy of target interception and the robust stability of the closed-loop system with respect to the uncertainties in the missile dynamics.     

THE EIGENVALUE SENSITIVITY ANALYSIS AND DESIGN FOR INTEGRATED FLIGHT/PROPULSION CONTROL SYSTEM

In this paper, sensitivity approaches are taken to analyze and design an integrated flight propulsion control system where the interaction between subsystems direitly affects the stability property and handling performances of the aircraft. The eigenvalue sen sitivity approach is employed to study the effect of coupling parameters on system stability and gain sensitivity approach is used to direct the reduced states feedback suboptimal control system design. Simulation results show that the integrated flight propulsion control system designed by sensitivity approaches is of good performance.