A novel two-stage extended Kalman filter algorithm for reaction flywheels fault estimation

This paper investigates the problem of two-stage extended Kalman filter(TSEKF)-based fault estimation for reaction flywheels in satellite attitude control systems(ACSs). Firstly, based on the separate-bias principle, a satellite ACSs with actuator fault is transformed into an augmented nonlinear discrete stochastic model; then, a novel TSEKF is suggested such that it can simultaneously estimate satellite attitude information and actuator faults no matter they are additive or multiplicative; finally, the proposed approach is respectively applied to estimating bias faults and loss of effectiveness for reaction flywheels in satellite ACSs, and simulation results demonstrate the effectiveness of the proposed fault estimation approach.     

航天器姿控系统的PD型学习观测器故障重构

针对满足Lipschitz条件的航天器姿态控制系统这一非线性系统中存在的执行器加性故障、空间干扰与测量噪声问题,提出了基于PD型迭代学习观测器的故障重构方法。该方法具有期望的鲁棒性能指标,能够在系统存在空间干扰与测量噪声情况下实现对突变故障与时变故障等故障类型的精确重构。基于线性矩阵不等式技术给出系统化PD型迭代学习观测器的设计方法,并根据Lyapunov稳定性理论对上述设计方法的稳定性条件进行了理论证明,同时利用鲁棒技术抑制空间干扰与测量噪声对执行器故障重构的影响,通过线性矩阵不等式工具箱求解观测器参数矩阵。最后,将该方法应用到航天器姿态控制系统中,仿真结果证明了该方法的有效性。     

具有Lipschitz非线性系统的航天器故障检测

对存在未知干扰的Lipschitz非线性系统,探讨了基于滑模观测器的执行器故障检测的方法。通过等价状态变换,可以得到2个子系统,其中一个子系统与执行器故障和未知干扰耦合,而另一个子系统则只与执行器故障耦合。在此基础上,提出了一种免受未知干扰影响,可对执行器故障敏感的滑模观测器设计方法。这种滑模观测器可以作为故障检测工具,而将其输出估计误差作为残差发生器,用于执行器故障检测。相比滑模观测器的故障重构方法,该方法大大放宽了对数学假设条件的要求。最后,对一个大攻角状态下的航天器的简化模型进行了数字仿真,仿真结果表明了所提方法的有效性。     

基于未知输入观测器的非线性动态系统故障估计

针对一类受扰非线性动态系统的执行器故障估计问题,提出一种未知输入观测器来实现故障估计。首先,通过坐标变换将原系统转化为合适的形式;其次,采用线性矩阵不等式与Lyapunov泛函分别设计H_∞输出反馈控制器和未知输入观测器,在此基础上实现对系统中执行器故障的渐近估计;最后,通过机械臂系统仿真分析并验证了所提方法的有效性。与已有方法相比,所提方法不要求故障可导,也不要求故障或干扰上界已知,因此易于在工程实际中实现对非线性系统执行器故障的估计。     

航天器自适应快速非奇异终端滑模容错控制

针对存在外部干扰、转动惯量矩阵不确定、控制器饱和以及执行器故障的航天器姿态跟踪控制问题,提出了基于自适应快速非奇异终端滑模的有限时间收敛控制方案。通过引入能够避免奇异点的具有有限时间收敛特性的快速非奇异终端滑模面,设计了满足多约束的有限时间姿态跟踪容错控制器,并利用参数自适应方法使控制器设计不依赖于系统惯量信息和外部干扰的上界。此外,所设计的控制器显式考虑了执行器输出力矩的饱和幅值特性,使航天器在饱和幅值的限制下完成姿态跟踪控制任务,并且无须进行在线故障估计。Lyapunov稳定性分析表明：在外部干扰、转动惯量矩阵不确定、控制器饱和以及执行器故障等约束条件下,所设计的控制器能够保证闭环系统的快速收敛性,而且对控制器饱和与执行器故障具有良好的容错性能。数值仿真校验了该控制器在姿态跟踪控制中的优良性能。     

多操纵面飞机舵面损伤的快速故障诊断

针对多操纵面飞机舵面损伤的快速故障诊断问题,提出一种直接估计舵面偏转量的自适应补偿观测器方法。首先,设计了增广观测器进行系统输入估计,并提出了自适应补偿方法解决其动态跟踪性能差的问题;其次,设计了一种新的自适应阈值以快速检测故障并降低虚警率;最后,利用舵面故障特点,采用重置初值的限定记忆最小二乘方法实现了对突变参数的实时估计,用以进行故障隔离。仿真结果表明:在不同的舵面损伤故障情况下,所提出的观测器方法能在20 ms内发出故障预警,并在0.22 s内确定故障位置,所采用的辨识方法可以在故障报警后的0.2 s内准确估计出损伤程度。     

基于鲁棒故障观测器的非线性离散系统容错控制设计

针对存在执行器故障以及未知干扰的非线性离散系统,提出了一种鲁棒故障估计与容错控制方法。首先在未知系统干扰作用下,设计鲁棒故障观测器实现系统状态和执行器故障的同步估计;然后根据鲁棒故障观测器得到的系统状态估计和故障估计信息设计容错控制器,进行状态反馈容错控制,同时基于D稳定与H_∞控制理论对鲁棒故障观测器和容错控制器进行设计,实现了多约束条件下的故障估计与容错控制;最后用飞行控制系统模型验证了所提方法的有效性。     

卫星姿态时延反步容错控制

针对卫星在轨飞行过程中存在执行机构故障及带有常值干扰的控制问题,提出了一种将时延控制(TDC)与反步技术相结合的鲁棒容错控制方法。该方法在继承反步控制优点的同时,引入积分环节用于减小常值干扰引起的稳态误差;同时,利用TDC的逼近能力来补偿执行机构的故障,且对设计者而言,故障信息不需要进行在线的检测和分离,而仅需要一步状态迭代。基于Lyapunov方法从理论上证明了系统的稳定性。最后,将该方法应用于卫星的姿态调节控制,仿真结果表明该控制器能有效地抑制外部干扰、参数不确定性和执行机构故障的约束,在完成姿态调节控制的同时,具有良好的过渡过程品质。     

Adaptive Integral-type Sliding Mode Control for Spacecraft Attitude Maneuvering Under Actuator Stuck Failures

A fault tolerant control (FTC) design technique against actuator stuck faults is investigated using integral-type sliding mode control (ISMC) with application to spacecraft attitude maneuvering control system. The principle of the proposed FTC scheme is to design an integral-type sliding mode attitude controller using on-line parameter adaptive updating law to compensate for the effects of stuck actuators. This adaptive law also provides both the estimates of the system parameters and external disturbances such that a prior knowledge of the spacecraft inertia or boundedness of disturbances is not required. Moreover, by including the integral feedback term, the designed controller can not only tolerate actuator stuck faults, but also compensate the disturbances with constant components. For the synthesis of controller, the fault time, patterns and values are unknown in advance, as motivated from a practical spacecraft control application. Complete stability and performance analysis are presented and illustrative simulation results of application to a spacecraft show that high precise attitude control with zero steady-error is successfully achieved using various scenarios of stuck failures in actuators.     

基于UIO的航空发动机执行机构故障诊断

为了提高航空发动机诊断过程中对噪声干扰和模型参数变化的鲁棒性,应用UIO(Unknown Input Ob-server)理论估计发动机动态系统的工作状态,通过干扰正交投影弱化外界干扰对状态估计的影响,处理了航空发动机执行机构的故障诊断问题。对航空发动机执行机构设计一组UIO观测器,其中每个UIO用于监测估计对应执行机构的故障偏移量,计算系统输出理论估计值与发动机实际测量信号间的残差数据,分析残差队列的幅值特性,实现航空发动机执行机构系统的故障检测和隔离。某型涡扇发动机上的实验结果表明,与Kalman滤波算法相比,UIO诊断方法更能鲁棒地检测和隔离出执行机构故障。     

Robust fault-tolerant attitude control for satellite with multiple uncertainties and actuator faults

In this paper, the satellite attitude control system subject to parametric perturbations, external disturbances, time-varying input delays, actuator faults and saturation is studied. In order to make the controller architecture simple and practical, the closed-loop system is transformed into a disturbance-free nominal system and an equivalent disturbance firstly. The equivalent disturbance represents all above uncertainties and actuator failures of the original system. Then a robust controller is proposed in a simple composition consisting of a nominal controller and a robust compensator. The nominal controller is designed for the transformed nominal system. The robust compensator is developed from a second-order filter to restrict the influence of the equivalent disturbance. Stability analysis indicates that both attitude tracking errors and compensator states can converge into the given neighborhood of the origin in finite time. To verify the effectiveness of the proposed control law, numerical simulations are carried out in different cases. Presented results demonstrate that the high-precision attitude tracking control can be achieved by the proposed fault-tolerant control law. Furthermore, multiple system performances including the control accuracy and energy consumption index are fully discussed under a series of compensator parameters.     

基于干扰观测器的四旋翼无人机离散时间容错控制

为了飞行控制方案便于在计算机上实现，针对具有外部干扰和执行器加性故障的四旋翼无人机（UAV）角度运动方程，给出一种基于干扰观测器的离散时间跟踪控制方案。通过设计离散时间干扰观测器抑制外部干扰和执行器故障的不利影响，并结合干扰观测器设计离散时间控制器。通过数值仿真验证了基于干扰观测器的离散时间容错控制方案的有效性。仿真结果表明，设计的离散控制器能够保证外部干扰和执行器故障综合作用下的四旋翼UAV系统跟踪控制性能。     

一种快速鲁棒自适应故障估计方法设计

针对一类线性系统的执行器故障,对一种快速鲁棒自适应故障估计方法进行了设计。所设计的自适应故障估计观测器在放松严格正实(SPR)条件的同时,还具备对干扰的鲁棒性。在设计观测器参数时,根据有界实引理,对干扰和故障变化率的影响分别设计不同的约束不等式,能够更灵活地调节二者对故障估计影响的比例,并且引入松弛变量设计不同的Lyapunov矩阵,降低了设计的保守性。在设计过程中,由于出现了非线性矩阵不等式,本文采用了锥补线性化的算法进行求解,最终求得了最优的观测器参数。最后通过对某飞行器控制系统的仿真证明了算法的有效性。     

可重复使用飞行器的保性能姿态跟踪控制方法

针对可重复使用飞行器再入姿态跟踪控制问题,在考虑执行器饱和、气动参数摄动和外部扰动的情况下,提出了一种保性能姿态跟踪控制方案。通过构造预设性能函数,使姿态跟踪误差在预先设置的包络内演化,保证了系统的瞬态和稳态性能;其次,借助于高增益扩张状态观测器解决了气动参数摄动和外部扰动的问题;之后,基于反步控制框架,设计了一种低复杂度的输出反馈扰动补偿控制方法,保证跟踪误差的收敛性。与已有方法相比,所设计的方法不包含一些复杂的非线性动力学近似技术,如神经网络等,降低了参数调节的复杂性,且无需对虚拟控制律重复微分,避免了"微分爆炸"问题。同时,Lyapunov稳定性分析表明,该方法能够保证误差变量的预期收敛以及其他闭环系统信号的有界性。最后,通过对比仿真验证了所提方法的有效性及可行性。     

基于自适应滑模观测器的航空发动机故障诊断

为解决现有航空发动机基于模型的在线故障诊断方法存在对模型精度要求高等的问题,利用滑模方法设计一种自适应滑模观测器对航空发动机进行在线故障重构、诊断与隔离。对传感器故障和执行机构故障分别设计了重构算法,针对两者重构故障的特点提出了判断逻辑,讨论了设计参数对于观测效果与抖振的影响。 Matlab/Simulink仿真结果显示,重构的故障与实际故障基本吻合,对故障的诊断、隔离、定位具有良好效果,并对环境不确定性具有优良的鲁棒性。     

Anti-disturbance attitude control of combined spacecraft with enhanced control allocation scheme

In this paper, we propose a novel anti-disturbance attitude control law for combined spacecraft with an improved closed-loop control allocation scheme. More specifically, a saturated approach is adopted to guarantee the global asymptotic stability under control input saturation. To enhance the robustness of the system, a nonlinear disturbance observer is constructed to compensate the disturbances caused by inertial parameter uncertainty and unmodeled dynamics. Next, the quadratic programming algorithm is used to obtain an optimal open-loop control allocation scheme, where both energy consumption and actuator saturation have been considered in the allocation of the virtual control command. Then, a modified closed-loop control allocation scheme is proposed to reduce the allocation error under the actuator uncertainty. Finally, stability analysis of the closed-loop system with the proposed allocation scheme is provided. Simulation results confirm the effectiveness of the proposed control scheme.     

Fault-tolerant control with mixed aerodynamic surfaces and RCS jets for hypersonic reentry vehicles

This paper proposes a fault-tolerant strategy for hypersonic reentry vehicles with mixed aerodynamic surfaces and reaction control systems (RCS) under external disturbances and subject to actuator faults. Aerodynamic surfaces are treated as the primary actuator in normal situations, and they are driven by a continuous quadratic programming (QP) allocator to generate torque com-manded by a nonlinear adaptive feedback control law. When aerodynamic surfaces encounter faults, they may not be able to provide sufficient torque as commanded, and RCS jets are activated to augment the aerodynamic surfaces to compensate for insufficient torque. Partial loss of effective-ness and stuck faults are considered in this paper, and observers are designed to detect and identify the faults. Based on the fault identification results, an RCS control allocator using integer linear programming (ILP) techniques is designed to determine the optimal combination of activated RCS jets. By treating the RCS control allocator as a quantization element, closed-loop stability with both continuous and quantized inputs is analyzed. Simulation results verify the effectiveness of the proposed method.     

Integrated fault estimation and fault-tolerant control for a flexible regional aircraft

The article focuses on the design and application of an active reconfigurable controller that mitigates the effects of gust load and actuator faults on a flexible aircraft. A novel integrated adaptive output feedback scheme is investigated to address the actuator faults. The real-time fault values provided by the fault estimation module are considered in the reconfigurable control law to improve the fault-tolerant capability. The estimate values of faults and control gains are calculated by anal...     

使用变速控制力矩陀螺的航天器鲁棒自适应姿态跟踪控制

 研究以变速控制力矩陀螺群（VSCMGs）为执行机构的航天器姿态跟踪问题。采用四元数描述姿态, 在姿态误差的描述中引入了现时姿态与期望姿态之间的方向余弦矩阵。考虑执行机构模型参数不确定和有外干扰的情况, 姿态误差动力学方程为多输入多输出(MIMO)的非线性系统。基于Lyapunov理论设计了鲁棒自适应控制器, 运用光滑投影算法避免了估计参数陷入奇异。仿真结果表明, 设计的鲁棒自适应控制律明显地缩小了姿态跟踪误差, 很好地解决了外部环境干扰和执行机构由于安装误差或机械磨损造成的轴承方向未对准的问题。     

基于深度森林的卫星ACS执行机构与传感器故障识别

针对卫星姿态控制系统（ACS）闭环回路的故障难以辨识的问题,引入深度森林算法,实现执行机构与传感器故障识别。首先针对可获取的少量卫星姿态控制系统遥测数据,结合系统动力学特性,研究合适的特征选择和特征提取方法,再结合深度森林算法进行故障信息学习与辨识,建立故障预测模型,实现执行机构故障与传感器故障的识别。半物理仿真结果表明：在存在气浮台干扰力矩、卫星转动惯量未知、飞轮非线性特性、闭环故障传播等多种不利因素情况下,深度森林算法对于执行机构和传感器故障具有高效的识别能力。