表面粗糙的复杂目标全极化ISAR图像快速仿真

为了获取基于模板图像的车辆、飞机等复杂目标识别所需的海量高质量逆合成孔径雷达(ISAR)图像,提出了表面粗糙的复杂目标全极化ISAR图像快速仿真方法。该方法预先对车辆和飞机等复杂目标表面粗糙程度进行分级定量描述,并以改进的射线弹跳法和等效边缘流法快速预估来自目标粗糙表面的镜面反射和多次反射贡献以及细分边缘的绕射贡献,经相干叠加获得目标的精确电磁散射数据,最后进行成像处理得到高质量全极化ISAR图像。标准体、飞机和车辆目标的仿真实验结果验证了该方法的准确性和有效性。     

K8V变稳飞机飞行试验验证系统

介绍了Ｋ８Ｖ变稳飞机飞行试验验证系统的组成及功能,分别阐述了该系统的飞控软件综合验证子系统、机上地面试验数据采集与处理子系统和飞行试验数据处理分析子系统等三部分的组成、工作原理、以及在飞行试验各个阶段的不同特点和作用。通过Ｋ８Ｖ变稳飞机飞行试验的应用,表明该系统能够满足变稳飞机的软件维护、系统验收试飞及后续的应用研究,具有实时,快速,准确,自动化等优点,可为Ｋ８Ｖ变稳飞机应用研究提供重要的支持手段     

Fully distributed time-varying formation tracking control for multiple quadrotor vehicles via finite-time convergent extended state observer

This paper investigates a time-varying anti-disturbance formation problem for a group of quadrotor aircrafts with time-varying uncertainties and a directed interaction topology. A novel Finite-Time Convergent Extended State Observer (FTCESO) based fully-distributed formation control scheme is proposed to enhance the disturbance rejection and the formation tracking performances for networked quadrotors. By adopting the hierarchical control strategy, the multi-quadrotor system is separated into two subsystems: the outer-loop cooperative subsystem and the inner-loop attitude subsystem. In the outer-loop subsystem, with the estimation of disturbing forces and uncertain dynamics from FTCESOs, an adaptive consensus theory based cooperative controller is exploited to ensure the multiple quadrotors form and maintain a time-varying pattern relying only on the positions of the neighboring aircrafts. In the inner-loop subsystem, the desired attitude generated by the cooperative control law is stably tracked under a FTCESO-based attitude controller in a finite time. Based on a detailed algorithm to specify the cooperative control protocol, the feasibility condition to achieve the time-varying anti-disturbance formation tracking is derived and the rigorous analysis of the whole closed-loop multi-quadrotor system is given. Some numerical examples are conducted to intuitively demonstrate the effectiveness and the improvements of the proposed control framework.     

21世纪初军用飞行器战术技术要求的新内容——隐身能力

本文从战争的启示、系统工程分析的结论及反隐身技术的威胁等三方面,论证了“隐身能力”对未来军用飞行器的重要性。文中着重分析了21世纪初军用飞行器战术技术要求的新内容——“隐身能力”所包括的三个内容:（1）飞行器的散射特性及辐射特性;（2）飞行器的电子干扰能力;（3）飞行器所用的战术隐身技术。     

辅助动力装置系统进气风门位置控制设计与研究

辅助动力装置系统进气风门位置控制子系统用于地面和空中控制辅助动力装置进气风门的打开和关闭,通常由控制器,作动机构(电动作动器和连杆机构)组成。辅助动力装置系统进气风门位置控制子系统的设计是辅助动力装置控制系统设计的一部分,和辅助动力装置进气风门设计、进气风门气动载荷计算分析及辅助动力装置进气道设计同步进行,相互影响。对某型飞机的辅助动力装置系统进气风门位置控制设计方案进行了介绍,该风门位置控制采用单独的风门控制器,降低了辅助动力装置FADEC(Full Authority Digital Electrical Controller,全权限数字电子控制器,简称FADEC)软硬件设计复杂度,简化了接口设计;并且设计了一种新型辅助动力装置系统进气风门作动机构,该作动机构安装/拆卸方便,可达性好;具有力矩放大功能,且该机构可调节,能输出不同大小的力矩。该进气风门位置控制子系统经过型号验证,对后续型号研制具有较强的指导性。     

深空探测器自主技术发展现状与趋势

深空探测器距离地球远、所处环境复杂、苛刻,利用地面测控站进行深空探测器的遥测和遥控已经很难满足探测器控制的实时性和安全性要求。深空探测器自主技术即通过在探测器上构建一个智能自主管理软件系统,自主地进行工程任务与科学任务的规划调度、命令执行、星上状态的监测与故障时的系统重构,完成无人参与情况下的探测器长时间自主安全运行,自主技术已经逐渐成为深空探测领域未来发展的一项关键技术。本文首先分析了传统测控模式对深空探测的约束,回顾了深空探测器自主技术发展的现状,分析了实现深空探测器自主运行的关键技术,包括在轨自主管理系统设计技术、自主任务规划技术、自主导航与控制技术、自主故障处理技术和自主科学任务操作技术。然后结合深空探测工程实施和技术发展需求,提出未来深空探测器自主技术发展的趋势和重点。     

深空探测器自主技术发展现状与趋势简

 深空探测器距离地球远、所处环境复杂、苛刻,利用地面测控站进行深空探测器的遥测和遥控已经很难满足探测器控制的实时性和安全性要求。深空探测器自主技术即通过在探测器上构建一个智能自主管理软件系统,自主地进行工程任务与科学任务的规划调度、命令执行、星上状态的监测与故障时的系统重构,完成无人参与情况下的探测器长时间自主安全运行,自主技术已经逐渐成为深空探测领域未来发展的一项关键技术。本文首先分析了传统测控模式对深空探测的约束,回顾了深空探测器自主技术发展的现状,分析了实现深空探测器自主运行的关键技术,包括在轨自主管理系统设计技术、自主任务规划技术、自主导航与控制技术、自主故障处理技术和自主科学任务操作技术。然后结合深空探测工程实施和技术发展需求,提出未来深空探测器自主技术发展的趋势和重点。     

分级式航空电子综合化仿真系统研究

介绍一个分级式航空电子综合化仿真系统。该系统以航空电子综合化工程中一个分系统为仿真目标,由两层双余度1553B总线和MBI(multiplex bus interface)将AVS(Avionics simulator)、SSCU(subsystem control unit)、若干个EQS(equipment simulator)以及部分真实设备连成的三级分布式计算机系统。一个面向实时控制的分布式操作系统和相应的仿真软件分布在三级仿真器中;其中,分布式操作系统实现两级总线的衔接、通信控制、并行多任务管理、错误检测、故障处理和实时内存数据库管理,仿真软件模拟航空电子上层环境、操作员控制与显示、分系统各设备数据产生与接收数据处理以及信息处理应用任务。系统研制成功为工程化实现打下了技术基础并提供了一个实验环境。     

Review of Airport Surface Movement Radar Technology

Runway incursion is defined by the FAA as "any occurrence at an airport involving an aircraft, vehicle, person or object on the ground that creates collision hazard or results in a loss of separation with an aircraft taking off, intending to take off, landing or intending to land." A summary of how severe this problem is can be found in a 2001 hearing before the Subcommittee on Aviation. Surface movement radar (SMR) technology has evolved over the years as part of an effort to mitigate runway incursion risks and enhance airport capacity. Surface movement surveillance systems of various types have been installed in major airports as early as the 1960s, and have kept evolving. The most recent system currently being deployed in the US by the FAA is the airport surface movement detection equipment model X (ASDE-X) system. In this system, unlike previous systems, the surface movement radar is just one of several sensors that are used in addition to transponder multilateration and GPS-based position reports, referred to as automatic dependent surveillance - broadcast or ADS-B; however, the SMR is a key subsystem. This paper contains an overview of the state-of-the-art SMR technology and provides an introduction on the use of radar technology for this commercial application. It focuses on the architecture, characteristics and technology of the radar sensor, the characteristics of the clutter and how it affects the performance, effects of multipath, automatic detection and comparison of several sensor architectures. Sensis Corporation has recently completed the testing of a new, improved SMR, which is now part of ASDE-X system. This paper summarizes the main features of this radar     

大型民机的非相似余度飞控计算机研究

 对中国自主研制的大型民机的余度飞行控制系统进行基础技术研究,设计了一套适合民机电传(FBW)系统的余度飞控计算机(FCC)新方案。提出了民机余度飞控计算机的2个设计准则：满足系统的可靠性指标和满足FO/FO/FO容错等级。然后根据这2个基本准则,给出了民机余度飞控计算机设计的7个建议,从而确定了民机余度飞行控制系统的余度数和余度结构：新型民机的余度飞行控制系统可采用非相似四余度,每个余度通道由两个支路构成比较监控结构,每个支路运行2套软件,保证软硬件系统的可靠性均衡。还确定了民机余度飞行控制系统的工作方式,使用Petri网分析了新方案的可靠性,并与B777和A320的余度飞控计算机进行了比较。     

基于ARINC-618协议的地空数据链技术研究

地空数据链作为大型民机的标准配置,在我国自主研制大型民用客机的过程中需要深入、全面地了解和掌握。鉴于当前地空数据链设备仅有国外个别厂商提供,国内相关领域的技术积累较少,针对地空数据链的基本问题,开展了以ARINC-618协议为核心的地空数据链的传输信号和译码等基础研究,并以过境飞机的ACARS信号为基础进行了技术分析。     

一种导航精度的综合评估表示方法

为了评估表示导航系统精度, 提出一种基于雷达图的综合评估表示方法, 包括速度、位置、姿态精度的评估表示。雷达图具有可视化的优点, 便于进行优劣分 析、综合评价,因此可以直观地将导航系统的精度表达出来。以捷联惯导系统和全球卫 星定位系统的组合导航系统精度对比分析为例进行研究,采用雷达图的方式取得了较好 的对比分析效果。将雷达图应用在组合导航系统的精度评估中,可简明直观地考核其精 度和性能,这为导航系统精度评估表示提供了一种有效的手段。     

A new approach to on-board stationkeeping of GEO-satellites

This paper proposes a new autonomous stationkeeping system suitable for geostationary satellite operation and presents the results of the computer simulations conducted to verify the proposed system. The proposed on-board stationkeeping system receives pseudo-range signal from the ground equipments located at two different positions with a long baseline, determines the orbit error in real-time, and generates the orbit control command. To minimize the complexity of the on-board stationkeeping logic and to improve reliability, a simple orbit controller has been designed, which generates a series of control signal making the orbit roughly follow the predetermined reference range data. The reference range data are assumed to be generated through a ground based computer simulation and embedded or uploaded with time tag. Finally, the performance of the proposed system has been verified through computer simulations.     

基于DSHplus 的前轮转弯系统的仿真研究

飞机前轮转弯系统是起落架系统的重要组成部分,在对前轮转弯系统进行分析研究的基础上,应用液压仿真软件DSHplus,对前轮转弯液压系统建模仿真。仿真结果与地面试验结果基本一致,验证了模型的准确性。并提出应用频谱分析的方法,对转弯液压系统进行频率响应分析。该方法在设计初期能够增强系统的稳定性,减少研发开支,提高核心竞争力。     

地球敏感器月球自主干扰保护异常分析及对策

针对某同步三轴稳定卫星地球敏感器自主干扰保护异常的问题,分析了地球敏感器受月球干扰的机理,详细比较了地面与星载月球干扰预报算法,挖掘比对了星载干扰保护软件数据,通过分析遥测数据及事后地面仿真计算软件处理验证,对异常点进行了准确定位,得出了星载月球干扰预报算法的局限性会导致卫星自主干扰保护异常的结论。并在此基础上,提出了在轨卫星地球敏感器受月球干扰自主保护异常时的处置对策,对后续同平台卫星相关设计提出了修改建议。     

航空发动机数控系统综合仿真平台设计

综合现有软硬件资源,采用模块化方法设计了航空发动机数字电子控制系统综合仿真平台,其框架主要包括发动机模型系统、传感器信号模拟与处理、控制器快速原型等子系统.发动机模型系统采用集成仿真环境调用液压执行装置和发动机数学模型库方式设计;快速原型系统采用Matlab/Simulink环境下将控制程序封装成S-Function的方法设计;软件设计重点描述了混合编程与定时器编程技术.以某双轴涡扇发动机为应用对象,进行控制系统数字仿真、半物理模拟试验和台架试车,在相同控制参数下,仿真试验与台架试车结果相似,表明所设计综合仿真平台具有工程应用价值.      

Aging avionics and net-centric operations

The transformation to net-centric operations necessitates evaluation of existing avionics capabilities, identification of deficiencies of these avionics for net-centric operations, and evaluation of alternative avionics that can provide the needed capabilities. The Global Information Grid (GIG) enables net-centric operations. The purpose of the GIG is to provide end users real-time or near-real-time access to multiple information sources ranging from airborne/satellite/ground sensors (video imagery and processed visual information/data) to databases. The end users in an aircraft view and interact with this information through the human system interface (HSI) or "smart" displays. The information is transmitted across a Gigabit Ethernet on-board the aircraft that interfaces with multiple channels of a software programmable radio that acts as a hub in the GIG network, or on-board sensors and processors. This paper presents the mandated capabilities, and the processes involved in determination of upgrades needed to achieve net-centric operations.     

Optimal sensor selection strategy for discrete-time stateestimators

A novel sensor selection strategy is introduced, which can be implemented on-line in time-varying discrete-time system. We consider a case in which several measurement subsystem are available, each of which may be used to drive a state estimation algorithm. However, due to practical implementation constraints (such as the ability of the on-board computer to process the acquired data), only one of these subsystems can actually by utilized at a measurement update. An algorithm is needed, by which the optimal measurement subsystem to be used is selected at each sensor selection epoch. The approach described is based on using the square root V-Lambda information filter as the underlying state estimation algorithm. This algorithm continuously provides its user with the spectral factors of the estimation error covariance matrix, which are used in this work as the basis for an on-line decision procedure by which the optimal measurement strategy is derived. At each sensor selection epoch, a measurement subsystem is selected, which contributes the largest amount of information along the principal state space direction associated with the largest current estimation error. A numerical example is presented, which demonstrates the performance of the new algorithm. The state estimation problem is solved for a third-order time-varying system equipped with three measurement subsystem, only one of which can be used at a measurement update. It is shown that the optimal measurement strategy algorithm enhances the estimator by substantially reducing the maximal estimation error     

Spacecraft design considerations for small satellite remote sensing

The idea of adapting existing small satellite technology for remote sensing purposes is discussed. The major design problems and constraints influencing the design of a small low-cost remote sensing satellite bus are identified using the subsystem approach. Key design areas include the improvement of battery technology and the development of a deployable solar array, attitude control assemblies, on-board data processing/storage, and ground station data acquisition. Although the eventual satellite would also have to be somewhat larger, more powerful and, above all, more sophisticated than the previous small satellites, this is considered to be a natural progression of research in this area     

Smuggling interdiction using an adaptation of the AN/APG-76multimode radar

The AN/APG-76 multimode radar was designed and developed for a multimode attack fighter application requiring rapid search, detection, identification, and precision location of both airborne and surface targets from long standoff ranges under adverse weather conditions. Unique is the radar's ability to generate SAR images of a selected area while simultaneously detecting and tracking all-speed moving objects located within that imaged region. Northrop Grumman Norden Systems has recently upgraded and adapted this radar to smuggling interdiction and related law enforcement missions. These adaptations have added an integrated GPS/INS subsystem for enhanced self-navigation and target location accuracy, a long range wide-band digital data link and ground station for mission control and data dissemination, a 3-D interferometric SAR imaging capability for detailed high resolution topographic mapping, and 1 meter and 0.3 meter resolution SAR modes for positive target identification. Additionally, the radar has been installed into wing-mounted pods and adapted for side-looking and 360 degree coverage applications. Automatic target detection and enhanced-range sea-surveillance and air-targeting modes are also now available through the use of open architecture commercial processors and non-proprietary transportable programming languages