Sailing with solar and planetary radiation pressure

Literature on solar sailing has thus far mostly considered solar radiation pressure (SRP) as the only contribution to sail force. However, considering a sail in a planetary mission scenario, a new contribution can be added. Since the planet itself emits radiation, this generates a radial planetary radiation pressure (PRP) that is also exerted on the sail. Hence, this work studies the combined effects of both SRP and PRP on a sail for two case studies, i.e. Earth and Venus. In proximity of the Earth, the effect of PRP can be significant under specific conditions. Around Venus, instead, PRP is by far the dominating contribution. These combined effects have been studied for single- and double-sided reflective coating and including eclipse. Results show potential increase in the net acceleration and a change in the optimal attitude to maximise the acceleration in a given direction. Moreover, an increasing semi-major axis manoeuvre is shown with and without PRP, to quantify the difference on a real-case scenario.     

Influence of curved thin-film device on deformation of a solar sail

A spinning solar sail IKAROS’s membrane is estimated to unexpectedly deform into an inverted pyramid shape due to thin-film devices with curvature, such as thin-film solar cells and steering devices on the membrane. It is important to investigate the deformation caused by the curved thin-film devices and predict the sail shape because the out-of-plane deformation greatly affects solar radiation pressure (SRP) and SRP torque. The purpose of this paper is to clarify the relationship between the global shape and orientation and position of curved thin-film devices and to evaluate SRP torque on the global shape using finite element analysis. The global shape is evaluated based on the out-of-plane displacement and the SRP torque. When the curved thin-film devices make the membrane shrink in the circumferential, diagonal, and radial direction, the sail deforms into a pyramid shape, an inverted pyramid one, and a saddle one, respectively. The saddle shape is more desirable for solar sails than the inverted pyramid shape and the pyramid one from the viewpoint of shape stability to SRP and control of SRP torque in the normal direction of the sail (windmill torque). The position of the thin-film device tends to increase the absolute value of windmill torque when it is biased circumferentially from the petal central axis. The suggested design principles for the arrangement of thin-film devices is that the curved thin-film devices should be directed so that the sail shrinks in the radial direction in order to deform the sail into a saddle shape with high shape stability, and the position of the thin-film devices should be biased in the circumferential direction paying attention to the absolute value of windmill torque to determine the direction of windmill torque.     

Shape optimization of a three-dimensional membrane-structured solar sail using an angular momentum unloading strategy

A shape of the satellite’s solar sail membrane is essential for unloading angular momentum in the three-axis stabilized attitude control system because the three-dimensional solar sail can receive solar radiation pressure from arbitrary directions. In this paper, the objective is the shape optimization of a three-dimensional membrane-structured solar sail using the angular momentum unloading strategy. We modelled and simulated the solar radiation pressure torque, for unloading angular momentum. Using the simulation system, since the unloading angular momentum rate is maximized, the shape of the three-dimensional solar sail was optimized using a Genetic algorithm and Sequential Quadratic Programming. The unloading velocity in the optimized shaped solar sail was greatly improved with respect to a conventional flat or pyramid solar sail.     

Microscopic approach to analyze solar-sail space-environment effects

Near-sun space-environment effects on metallic thin films solar sails as well as hollow-body sails with inflation fill gas are considered. Analysis of the interaction of the solar radiation with the solar-sail materials is presented. This analysis evaluates worst-case solar radiation effects during solar-radiation-pressure acceleration. The dependence of the thickness of solar sail on temperature and on wavelength of the electromagnetic spectrum of solar radiation is investigated. Physical processes of the interactions of photons, electrons, protons and α-particles with sail material atoms and nuclei, and inflation fill gas molecules are analyzed. Calculations utilized conservative assumptions with the highest values for the available cross sections for interactions of solar photons, electrons and protons with atoms, nuclei and hydrogen molecules. It is shown that for high-energy photons, electrons and protons the beryllium sail is mostly transparent. Sail material will be partially ionized by solar UV and low-energy solar electrons. For a hollow-body photon sail effects including hydrogen diffusion through the solar-sail walls, and electrostatic pressure is considered. Electrostatic pressure caused by the electrically charged sail’s electric field may require mitigation since sail material tensile strength decreases with elevated temperature. It also can substitute inflation-gas pressure loss due to gas diffusion and perforation by micrometeoroids impact to keep the sail inflated.     

太阳帆飞行器轨道动力学分析

通过分析对轨道要素影响最大的加速度分量,使太阳帆总是位于光压力沿这个加速度方向的分量最大的方位。通过分析轨道要素调整时的相互影响关系,提出了同时修正多种轨道偏差的控制方案。对处于地球静止轨道上太阳帆飞行器的轨道调整进行了数值仿真。结果证明利用太阳光压力进行轨道调整是可行的,而且有利的太阳方位是进行快速有效的轨道调整的必要条件。     

Solar sail near the Sun: Point-like and extended models of radiation source

Some modifications of solar sail radiation pressure forces on a plate and on a sphere for use in the numerical simulation of ‘local-optimal’ (or ‘instantaneously optimal’) trajectories of a spacecraft with a solar sail are suggested. The force model development is chronologically reviewed, including its connection with solar sail surface reflective and thermal properties. The sail surface is considered as partly absorbing, partly reflective (specular and diffuse), partly transparent. Thermal balance is specified because the spacecraft moves from circular Earth orbit to near-Sun regions and thermal limitations on the sail film are taken into account. A spherical sail-balloon can be used in near-Sun regions for scientific research beginning with the solar-synchronous orbit and moving outward from the Sun. The Sun is considered not only as a point-like source of radiation but also as an extended source of radiation which is assumed to be consequently as a point-like source of radiation, a uniformly bright flat solar disc and uniformly bright solar sphere.     

Performance analysis and mission applications of a new solar sail concept based on crossed booms with tip-deployed membranes

For precursor solar sail activities a strategy for a controlled deployment of large membranes was developed based on a combination of zig-zag folding and coiling of triangular sail segments spanned between crossed booms. This strategy required four autonomous deployment units that were jettisoned after the deployment is completed. In order to reduce the complexity of the system an adaptation of that deployment strategy is investigated.A baseline design for the deployment mechanisms is established that allows the deployment actuation from a central bus system in order to reduce the complexity of the system. The mass of such a sail craft will be slightly increased but its performance is still be reasonable for first solar sail missions.The presented design will be demonstrated on breadboard level showing the feasibility of the deployment strategy. The characteristic acceleration will be evaluated and compared to the requirements of certain proposed solar sail missions.     

Attitude stability criteria of axisymmetric solar sail

Passive attitude stability criteria of a solar sail whose membrane surface is axisymmetric are studied in this paper under a general SRP model. This paper proves that arbitrary attitude equilibrium position can be designed through adjusting the deviation between the pressure center and the mass center of the sail. The linearized method is applied to inspect analytically the stability of the equilibrium point from two different points of views. The results show that the attitude stability depends on the membrane surface shape and area. The results of simulation with full dynamic equations confirm that the two stability criteria are effective in judging the attitude stability for axisymmetric solar sail. Several possible applications of the study are also mentioned.     

Optimal steering law of refractive sail

The interaction between electromagnetic waves and matter is the working principle of a photon-propelled spacecraft, which extracts momentum from the solar radiation to obtain a propulsive acceleration. An example is offered by solar sails, which use a thin membrane to reflect the impinging photons. The solar radiation momentum may actually be transferred to matter by means of various optical phenomena, such as absorption, emission, or refraction. This paper deals with the novel concept of a refractive sail, through which the Sun’s light is refracted by crossing a film made of polymeric micro-prisms. The main feature of a refractive sail is to give a large transverse component of thrust even when the sail nominal plane is orthogonal to the Sun-spacecraft line. Starting from the recent literature results, this paper proposes a semi-analytical thrust model that estimates the characteristics of the propulsive acceleration vector as a function of the sail attitude angles. Such a mathematical model is then used to analyze a simplified Earth-Mars and Earth-Venus interplanetary transfer within an optimal framework.     

Extrasolar space exploration by a solar sail accelerated via thermal desorption of coating

For extrasolar space exploration it might be very convenient to take advantage of space environmental effects such as solar radiation heating to accelerate a solar sail coated by materials that undergo thermal desorption at a particular temperature. Thermal desorption can provide additional thrust as heating liberates atoms, embedded on the surface of the solar sail. We are considering orbital dynamics of a solar sail coated with materials that undergo thermal desorption at a specific temperature, as a result of heating by solar radiation at a particular heliocentric distance, and focus on two scenarios that only differ in the way the sail approaches the Sun. For each scenario once the perihelion is reached, the sail coat undergoes thermal desorption. When the desorption process ends, the sail then escapes the Solar System having the conventional acceleration due to solar radiation pressure. We study the dependence of a cruise speed of a solar sail on perihelion of the orbit where the solar sail is deployed. The following scenarios are considered and analyzed: (1) Hohmann transfer plus thermal desorption. In this scenario the sail would be carried as a payload to the perihelion with a conventional propulsion system by a Hohmann transfer from Earth’s orbit to an orbit very close to the Sun and then be deployed. Our calculations show that the cruise speed of the solar sail varies from 173?km/s to 325?km/s that corresponds to perihelion 0.3?AU and 0.1 AU, respectively. (2) Elliptical transfer plus Slingshot plus thermal desorption. In this scenario the transfer occurs from Earth’s orbit to Jupiter’s orbit; then a Jupiter’s fly-by leads to the orbit close to the Sun, where the sail is deployed and thermal desorption comes active. In this case the cruise speed of the solar sail varies from 187?km/s to 331?km/s depending on the perihelion of the orbit. Our study analyses and compares the different scenarios in which thermal desorption comes beside traditional propulsion systems for extrasolar space exploration.     

On-orbit verification of fuel-free attitude control system for spinning solar sail utilizing solar radiation pressure

This paper introduces a new attitude control system for a solar sail, which leverages solar radiation pressure. This novel system achieves completely fuel-free and oscillation-free attitude control of a flexible spinning solar sail. This system consists of thin-film-type devices that electrically control their optical parameters such as reflectivity to generate an imbalance in the solar radiation pressure applied to the edge of the sail. By using these devices, minute and continuous control torque can be applied to the sail to realize very stable and fuel-free attitude control of the large and flexible membrane. The control system was implemented as an optional attitude control system for small solar power sail demonstrator named IKAROS (Interplanetary Kite-craft Accelerated by Radiation Of the Sun). In-orbit attitude control experiments were conducted, and the performance of the controller was successfully verified in comparison with the ground-based analytical performance estimation.     

Solar sail deployment dynamics

The deployment dynamics of a solar sail consisting of four flexible booms and four membrane quadrants are studied. First, previous work on modelling only one membrane quadrant attached to two axially moving beams using time-varying quasi-modal expansion is extended to be applicable to the complete four-quadrant system. This is achieved via “lifting” the quadrant-level matrices into system-level forms by mapping the former’s constituent blocks to the correct partitions in the latter. After the quadrant-to-system conversion of the matrices, the equations of motion from the authors’ previous work readily apply to the complete system. Modal analysis is performed on a constant-length sail to validate the model’s basic foundations against the results obtained by finite element methods in the past literature. Deployment simulation results are presented, numerical parameter studies that show possibility of instability are performed using the system’s eigenvalues, and the stability results are discussed.     

Bound orbits of solar sails and general relativity

We study general relativistic effects on the bound orbits of solar sails. The combined effects of spacetime curvature and solar radiation pressure (SRP) lead to deviations from Kepler’s third law. Such kind of deviations also arise from frame dragging, the gravitational multipole moments of the sun, a net electric charge on the sun, and a positive cosmological constant. The SRP increases these deviations by several orders of magnitude, possibly rendering some of them detectable. We consider how the SRP modifies the perihelion shift of non-circular orbits, as well as the Lense-Thirring effect involving the precession of polar orbits. We investigate how the pitch angle for non-Keplerian orbits changes due to the partial absorption of light, general relativistic effects, and the oblateness of the sun. It is predicted that there is an analog of the Lense-Thirring effect for non-Keplerian orbits, in that the orbital plane precesses around the sun. We also consider the Poynting–Robertson effect and show that this effect can, in principle, be compensated for by an extremely small tilt of the solar sail.     

Effects of optical parameter measurement uncertainties and solar irradiance fluctuations on solar sailing

The heliocentric orbital dynamics of a spacecraft propelled by a solar sail is affected by some uncertainty sources, including possible inaccuracies in the measurement of the sail film optical properties. Moreover, the solar radiation pressure, which is responsible for the solar sail propulsive acceleration generation, is not time-constant and is subject to fluctuations that are basically unpredictable and superimposed to the well-known 11-year solar activity cycle. In this context, this work aims at investigating the effects of such uncertainties on the actual heliocentric trajectory of a solar sail by means of stochastic simulations performed with a generalized polynomial chaos procedure. The numerical results give an estimation of their impact on the actual heliocentric trajectory and identify whether some of the uncertainty sources are more relevant than others. This is a fundamental information for directing more accurate theoretical and experimental efforts toward the most important parameters, in order to obtain an accurate knowledge of the solar sail thrust vector characteristics and, eventually, of the spacecraft heliocentric position.     

H-reversal trajectory: A new mission application for high-performance solar sails

The aim of this paper is to quantify the performance of a flat solar sail to perform a double angular momentum reversal maneuver and produce a new class of two-dimensional, non-Keplerian orbits in the ecliptic plane. For a given pair of orbital parameters, the orbital period and the perihelion distance, it is possible to find the minimum solar sail characteristic acceleration required to fulfil a double angular momentum reversal trajectory. This problem is addressed using an optimal formulation and is solved through an indirect approach. The new trajectories are symmetrical with respect to the sun-perihelion line and exhibit a bean-like shape. Two main difficulties must be properly taken into account. On one side the sail is required to perform a rapid reorientation maneuver when it approaches the perihelion. Suitable simulations have shown that such a maneuver is feasible. In the second place the new trajectories require the use of high performance solar sails. For example, assuming an orbital period equal to 5 years, the required solar sail characteristic acceleration is greater than 3.4 mm/s². Such a value, although beyond the currently available sail performance, is comparable to what is required by the original concept of H-reversal maneuvers introduced by Vulpetti in 1996.     

Durability characterization of mechanical interfaces in solar sail membrane structures

The construction of a solar sail from commercially available metallized film presents several challenges. The solar sail membrane is made by seaming together precut lengths of ultrathin metallized polymer film into the required geometry. This assembled sail membrane is then folded into a small stowage volume prior to launch. The sail membranes must have additional features for connecting to rigid structural elements (e.g., sail booms) and must be electrically grounded to the spacecraft bus to prevent charge build up. Space durability of the material and mechanical interfaces of the sail membrane assemblies will be critical for the success of any solar sail mission. In this study, interfaces of polymer/metal joints in a representative solar sail membrane assembly were tested to ensure that the adhesive interfaces and the fastening grommets could withstand the temperature range and expected loads required for mission success. Various adhesion methods, such as surface treatment, commercial adhesives, and fastening systems, were experimentally tested in order to determine the most suitable method of construction.     

Influence of optical parameters on a solar sail motion

Detailed dynamic modeling of a solar sail requires recording of solar radiation pressure influence. A photon-solar sail is determined by the thrust value and the direction. We define the solar sail’s reflectivity depending on the film materials, the sail design and temperature, the thickness of multiple layers, and degradation factor, with a reasonable degree of accuracy. Thus, this work is devoted to the identification of optical characteristics of thin multilayer films in space flight conditions, i.e. to finding its reflectance, absorbance, and transmittance. In particular, the paper asks whether the solar sail simulates by a mathematical model of the optical characteristics of a multilayer epitaxial thin film. The temperature change effect and optical properties of solar sail degradation are considered as well. Solar sail flight from Earth to Mercury is designed as a simulation of the flight change in optical parameters.     

CubeSail: A low cost CubeSat based solar sail demonstration mission

CubeSail is a nano-solar sail mission based on the 3U CubeSat standard, which is currently being designed and built at the Surrey Space Centre, University of Surrey. CubeSail will have a total mass of around 3 kg and will deploy a 5 × 5 m sail in low Earth orbit. The primary aim of the mission is to demonstrate the concept of solar sailing and end-of-life de-orbiting using the sail membrane as a drag-sail. The spacecraft will have a compact 3-axis stabilised attitude control system, which uses three magnetic torquers aligned with the spacecraft principle axis as well as a novel two-dimensional translation stage separating the spacecraft bus from the sail. CubeSail’s deployment mechanism consists of four novel booms and four-quadrant sail membranes. The proposed booms are made from tape-spring blades and will deploy the sail membrane from a 2U CubeSat standard structure. This paper presents a systems level overview of the CubeSat mission, focusing on the mission orbit and de-orbiting, in addition to the deployment, attitude control and the satellite bus.     

太阳帆航天器编队维持和重构的方法研究

针对高面质比航天器可以利用太阳光压进行轨道控制的特点,本文提出一种太阳帆航天器编队构型维持和重构的方法.该方法通过控制主从航天器太阳帆姿态角和反射系数,调整主从航天器之间的光压差,产生抵消编队成员间相对运动受到摄动差或进行轨道机动时所需的连续小推力,从而实现编队构型的维持和重构.仿真结果表明,在主航天器太阳帆的姿态角和反射系数相对固定的条件下,对于太阳同步轨道上的高面质比太阳帆航天器编队,使用滑模控制方法,能够调整编队中从航天器太阳帆的姿态角和反射系数产生推力抵消摄动力影响,达到长期维持太阳帆航天器编队构型的目的;通过开环控制方法,能够调整编队中从航天器太阳帆的姿态角和反射系数产生连续小推力,在较长时间周期内实现编队重构.     

On the stabilizing effect of Solar Radiation Pressure in the Earth-Moon system

Solar sails change the natural dynamics of systems: Trajectories that are driven by gravitational forces can be displaced and changed because of the effect of Solar Radiation Pressure (SRP). Moreover, if the lightness number of the sail is large enough, the instability of certain orbits can be diminished and even removed. In this paper we modify two models for the motion of a probe in the Earth-Moon system that include the effect of Sun’s gravity to take also into account the effect of SRP. These models, the Bicircular Problem (BCP) and the Quasi-Bicircular Problem (QBCP), are periodic perturbations of the Earth-Moon Restricted Three Body Problem (RTBP). The models are modified to consider the effect of the SRP upon a solar sail. We provide examples of periodic orbits that are stabilized (or made less unstable) due to the effect of SRP.