H-reversal trajectory: A new mission application for high-performance solar sails

The aim of this paper is to quantify the performance of a flat solar sail to perform a double angular momentum reversal maneuver and produce a new class of two-dimensional, non-Keplerian orbits in the ecliptic plane. For a given pair of orbital parameters, the orbital period and the perihelion distance, it is possible to find the minimum solar sail characteristic acceleration required to fulfil a double angular momentum reversal trajectory. This problem is addressed using an optimal formulation and is solved through an indirect approach. The new trajectories are symmetrical with respect to the sun-perihelion line and exhibit a bean-like shape. Two main difficulties must be properly taken into account. On one side the sail is required to perform a rapid reorientation maneuver when it approaches the perihelion. Suitable simulations have shown that such a maneuver is feasible. In the second place the new trajectories require the use of high performance solar sails. For example, assuming an orbital period equal to 5 years, the required solar sail characteristic acceleration is greater than 3.4 mm/s². Such a value, although beyond the currently available sail performance, is comparable to what is required by the original concept of H-reversal maneuvers introduced by Vulpetti in 1996.     

On-orbit verification of fuel-free attitude control system for spinning solar sail utilizing solar radiation pressure

This paper introduces a new attitude control system for a solar sail, which leverages solar radiation pressure. This novel system achieves completely fuel-free and oscillation-free attitude control of a flexible spinning solar sail. This system consists of thin-film-type devices that electrically control their optical parameters such as reflectivity to generate an imbalance in the solar radiation pressure applied to the edge of the sail. By using these devices, minute and continuous control torque can be applied to the sail to realize very stable and fuel-free attitude control of the large and flexible membrane. The control system was implemented as an optional attitude control system for small solar power sail demonstrator named IKAROS (Interplanetary Kite-craft Accelerated by Radiation Of the Sun). In-orbit attitude control experiments were conducted, and the performance of the controller was successfully verified in comparison with the ground-based analytical performance estimation.     

Influence of curved thin-film device on deformation of a solar sail

A spinning solar sail IKAROS’s membrane is estimated to unexpectedly deform into an inverted pyramid shape due to thin-film devices with curvature, such as thin-film solar cells and steering devices on the membrane. It is important to investigate the deformation caused by the curved thin-film devices and predict the sail shape because the out-of-plane deformation greatly affects solar radiation pressure (SRP) and SRP torque. The purpose of this paper is to clarify the relationship between the global shape and orientation and position of curved thin-film devices and to evaluate SRP torque on the global shape using finite element analysis. The global shape is evaluated based on the out-of-plane displacement and the SRP torque. When the curved thin-film devices make the membrane shrink in the circumferential, diagonal, and radial direction, the sail deforms into a pyramid shape, an inverted pyramid one, and a saddle one, respectively. The saddle shape is more desirable for solar sails than the inverted pyramid shape and the pyramid one from the viewpoint of shape stability to SRP and control of SRP torque in the normal direction of the sail (windmill torque). The position of the thin-film device tends to increase the absolute value of windmill torque when it is biased circumferentially from the petal central axis. The suggested design principles for the arrangement of thin-film devices is that the curved thin-film devices should be directed so that the sail shrinks in the radial direction in order to deform the sail into a saddle shape with high shape stability, and the position of the thin-film devices should be biased in the circumferential direction paying attention to the absolute value of windmill torque to determine the direction of windmill torque.     

Microscopic approach to analyze solar-sail space-environment effects

Near-sun space-environment effects on metallic thin films solar sails as well as hollow-body sails with inflation fill gas are considered. Analysis of the interaction of the solar radiation with the solar-sail materials is presented. This analysis evaluates worst-case solar radiation effects during solar-radiation-pressure acceleration. The dependence of the thickness of solar sail on temperature and on wavelength of the electromagnetic spectrum of solar radiation is investigated. Physical processes of the interactions of photons, electrons, protons and α-particles with sail material atoms and nuclei, and inflation fill gas molecules are analyzed. Calculations utilized conservative assumptions with the highest values for the available cross sections for interactions of solar photons, electrons and protons with atoms, nuclei and hydrogen molecules. It is shown that for high-energy photons, electrons and protons the beryllium sail is mostly transparent. Sail material will be partially ionized by solar UV and low-energy solar electrons. For a hollow-body photon sail effects including hydrogen diffusion through the solar-sail walls, and electrostatic pressure is considered. Electrostatic pressure caused by the electrically charged sail’s electric field may require mitigation since sail material tensile strength decreases with elevated temperature. It also can substitute inflation-gas pressure loss due to gas diffusion and perforation by micrometeoroids impact to keep the sail inflated.     

Solar sail near the Sun: Point-like and extended models of radiation source

Some modifications of solar sail radiation pressure forces on a plate and on a sphere for use in the numerical simulation of ‘local-optimal’ (or ‘instantaneously optimal’) trajectories of a spacecraft with a solar sail are suggested. The force model development is chronologically reviewed, including its connection with solar sail surface reflective and thermal properties. The sail surface is considered as partly absorbing, partly reflective (specular and diffuse), partly transparent. Thermal balance is specified because the spacecraft moves from circular Earth orbit to near-Sun regions and thermal limitations on the sail film are taken into account. A spherical sail-balloon can be used in near-Sun regions for scientific research beginning with the solar-synchronous orbit and moving outward from the Sun. The Sun is considered not only as a point-like source of radiation but also as an extended source of radiation which is assumed to be consequently as a point-like source of radiation, a uniformly bright flat solar disc and uniformly bright solar sphere.     

Analysis of the solar sail deformation based on the point cloud method

The deformation of the solar-sail membrane is an important factor for causing inaccuracies in the solar-sail missions. This paper describes the solar sail under deformation by using a new modelling technique based on point cloud and triangular mesh generation. Two types of deformation, stemming from wrinkling and billowing, are modelled. The changes in the solar radiation pressure force and the moment caused by deformation are calculated and compared to the ideal non-deformed case. The heliocentric spiral trajectory and the orbital angular momentum reversal trajectory are taken as examples to quantify the influence of the deformation from an orbit point of view. Additionally, point cloud simplification, based on the normal vector and bounding box, is utilized to simplify the original deformed-sail model. It involves a reasonable reduction and renewal of the points in the model considering the variation of surface curvature. The simplification and its modelling accuracy are numerically investigated as well as computational efficiency.     

Effects of optical parameter measurement uncertainties and solar irradiance fluctuations on solar sailing

The heliocentric orbital dynamics of a spacecraft propelled by a solar sail is affected by some uncertainty sources, including possible inaccuracies in the measurement of the sail film optical properties. Moreover, the solar radiation pressure, which is responsible for the solar sail propulsive acceleration generation, is not time-constant and is subject to fluctuations that are basically unpredictable and superimposed to the well-known 11-year solar activity cycle. In this context, this work aims at investigating the effects of such uncertainties on the actual heliocentric trajectory of a solar sail by means of stochastic simulations performed with a generalized polynomial chaos procedure. The numerical results give an estimation of their impact on the actual heliocentric trajectory and identify whether some of the uncertainty sources are more relevant than others. This is a fundamental information for directing more accurate theoretical and experimental efforts toward the most important parameters, in order to obtain an accurate knowledge of the solar sail thrust vector characteristics and, eventually, of the spacecraft heliocentric position.     

Extrasolar space exploration by a solar sail accelerated via thermal desorption of coating

For extrasolar space exploration it might be very convenient to take advantage of space environmental effects such as solar radiation heating to accelerate a solar sail coated by materials that undergo thermal desorption at a particular temperature. Thermal desorption can provide additional thrust as heating liberates atoms, embedded on the surface of the solar sail. We are considering orbital dynamics of a solar sail coated with materials that undergo thermal desorption at a specific temperature, as a result of heating by solar radiation at a particular heliocentric distance, and focus on two scenarios that only differ in the way the sail approaches the Sun. For each scenario once the perihelion is reached, the sail coat undergoes thermal desorption. When the desorption process ends, the sail then escapes the Solar System having the conventional acceleration due to solar radiation pressure. We study the dependence of a cruise speed of a solar sail on perihelion of the orbit where the solar sail is deployed. The following scenarios are considered and analyzed: (1) Hohmann transfer plus thermal desorption. In this scenario the sail would be carried as a payload to the perihelion with a conventional propulsion system by a Hohmann transfer from Earth’s orbit to an orbit very close to the Sun and then be deployed. Our calculations show that the cruise speed of the solar sail varies from 173?km/s to 325?km/s that corresponds to perihelion 0.3?AU and 0.1 AU, respectively. (2) Elliptical transfer plus Slingshot plus thermal desorption. In this scenario the transfer occurs from Earth’s orbit to Jupiter’s orbit; then a Jupiter’s fly-by leads to the orbit close to the Sun, where the sail is deployed and thermal desorption comes active. In this case the cruise speed of the solar sail varies from 187?km/s to 331?km/s depending on the perihelion of the orbit. Our study analyses and compares the different scenarios in which thermal desorption comes beside traditional propulsion systems for extrasolar space exploration.     

A torus-shaped solar sail accelerated via thermal desorption of coating

A torus-shaped sail consists of a reflective membrane attached to an inflatable torus-shaped rim. The sail’s deployment from its stowed configuration is initiated by introducing inflation pressure into the toroidal rim with an attached circular flat membrane coated by heat-sensitive materials that undergo thermal desorption (TD) from a solid to a gas phase. Our study of the deployment and acceleration of the sail is split into three steps: at a particular heliocentric distance a torus-shaped sail is deployed by a gas inflated into the toroidal rim and the membrane is kept flat by the pressure of the gas; under heating by solar radiation, the membrane coat undergoes TD and the sail is accelerated via TD of coating and solar radiation pressure (SRP); when TD ends, the sail utilizes thrust only from SRP. We study the stability of the torus-shaped sail and deflection and vibration of the flat membrane due to the acceleration by TD and SRP.     

On the station keeping of a solar sail in the elliptic Sun–Earth system

In this work we focus on the dynamics of a solar sail in the Sun–Earth Elliptic Restricted Three-Body Problem with solar radiation pressure. The considered situation is the motion of a sail close to the L₁ point, but displacing the equilibrium point with the sail so that it is possible to have continuous communication with the Earth. In previous works we derived a station keeping strategy for this situation but using the Circular RTBP as a model.     

Dynamical analysis of a spinning solar sail

This paper discusses the orbit and attitude dynamics of a solar sail, and gives the sufficient conditions of a stable orbit and attitude coupled system. The stability of the coupled system is determined by the orbit stability and attitude stability. Based on the sufficient conditions, a spin-stabilized solar sail of cone configuration is proposed to evolve in the heliocentric displaced orbit. For this kind of configuration, the attitude is always stable by spinning itself. The orbit stability depends on the orbit parameters of the heliocentric displaced orbit, the ratio of the orbit radius to displaced distance and orbit angular velocity. If the center of mass and center of pressure overlap, it can be proved that the coupled system is stable when the orbit parameters are chosen in the stable region. When the center of mass and center of pressure offset exists, the stability of the coupled system can not be judged. A numerical example is given and the result shows that both the orbit and attitude are stable for the case.     

Influence of optical parameters on a solar sail motion

Detailed dynamic modeling of a solar sail requires recording of solar radiation pressure influence. A photon-solar sail is determined by the thrust value and the direction. We define the solar sail’s reflectivity depending on the film materials, the sail design and temperature, the thickness of multiple layers, and degradation factor, with a reasonable degree of accuracy. Thus, this work is devoted to the identification of optical characteristics of thin multilayer films in space flight conditions, i.e. to finding its reflectance, absorbance, and transmittance. In particular, the paper asks whether the solar sail simulates by a mathematical model of the optical characteristics of a multilayer epitaxial thin film. The temperature change effect and optical properties of solar sail degradation are considered as well. Solar sail flight from Earth to Mercury is designed as a simulation of the flight change in optical parameters.     

Sailing with solar and planetary radiation pressure

Literature on solar sailing has thus far mostly considered solar radiation pressure (SRP) as the only contribution to sail force. However, considering a sail in a planetary mission scenario, a new contribution can be added. Since the planet itself emits radiation, this generates a radial planetary radiation pressure (PRP) that is also exerted on the sail. Hence, this work studies the combined effects of both SRP and PRP on a sail for two case studies, i.e. Earth and Venus. In proximity of the Earth, the effect of PRP can be significant under specific conditions. Around Venus, instead, PRP is by far the dominating contribution. These combined effects have been studied for single- and double-sided reflective coating and including eclipse. Results show potential increase in the net acceleration and a change in the optimal attitude to maximise the acceleration in a given direction. Moreover, an increasing semi-major axis manoeuvre is shown with and without PRP, to quantify the difference on a real-case scenario.     

Attitude stability criteria of axisymmetric solar sail

Passive attitude stability criteria of a solar sail whose membrane surface is axisymmetric are studied in this paper under a general SRP model. This paper proves that arbitrary attitude equilibrium position can be designed through adjusting the deviation between the pressure center and the mass center of the sail. The linearized method is applied to inspect analytically the stability of the equilibrium point from two different points of views. The results show that the attitude stability depends on the membrane surface shape and area. The results of simulation with full dynamic equations confirm that the two stability criteria are effective in judging the attitude stability for axisymmetric solar sail. Several possible applications of the study are also mentioned.     

太阳帆飞行器轨道动力学分析

通过分析对轨道要素影响最大的加速度分量,使太阳帆总是位于光压力沿这个加速度方向的分量最大的方位。通过分析轨道要素调整时的相互影响关系,提出了同时修正多种轨道偏差的控制方案。对处于地球静止轨道上太阳帆飞行器的轨道调整进行了数值仿真。结果证明利用太阳光压力进行轨道调整是可行的,而且有利的太阳方位是进行快速有效的轨道调整的必要条件。     

Status of solar sail technology within NASA

In the early 2000s, NASA made substantial progress in the development of solar sail propulsion systems for use in robotic science and exploration of the solar system. Two different 20-m solar sail systems were produced. NASA has successfully completed functional vacuum testing in their Glenn Research Center’s Space Power Facility at Plum Brook Station, Ohio. The sails were designed and developed by Alliant Techsystems Space Systems and L’Garde, respectively. The sail systems consist of a central structure with four deployable booms that support each sail. These sail designs are robust enough for deployment in a one-atmosphere, one-gravity environment and are scalable to much larger solar sails – perhaps as large as 150 m on a side. Computation modeling and analytical simulations were performed in order to assess the scalability of the technology to the larger sizes that are required to implement the first generation of missions using solar sails. Furthermore, life and space environmental effects testing of sail and component materials was also conducted.     

太阳帆航天器编队维持和重构的方法研究

针对高面质比航天器可以利用太阳光压进行轨道控制的特点,本文提出一种太阳帆航天器编队构型维持和重构的方法.该方法通过控制主从航天器太阳帆姿态角和反射系数,调整主从航天器之间的光压差,产生抵消编队成员间相对运动受到摄动差或进行轨道机动时所需的连续小推力,从而实现编队构型的维持和重构.仿真结果表明,在主航天器太阳帆的姿态角和反射系数相对固定的条件下,对于太阳同步轨道上的高面质比太阳帆航天器编队,使用滑模控制方法,能够调整编队中从航天器太阳帆的姿态角和反射系数产生推力抵消摄动力影响,达到长期维持太阳帆航天器编队构型的目的;通过开环控制方法,能够调整编队中从航天器太阳帆的姿态角和反射系数产生连续小推力,在较长时间周期内实现编队重构.     

Optimal steering law of refractive sail

The interaction between electromagnetic waves and matter is the working principle of a photon-propelled spacecraft, which extracts momentum from the solar radiation to obtain a propulsive acceleration. An example is offered by solar sails, which use a thin membrane to reflect the impinging photons. The solar radiation momentum may actually be transferred to matter by means of various optical phenomena, such as absorption, emission, or refraction. This paper deals with the novel concept of a refractive sail, through which the Sun’s light is refracted by crossing a film made of polymeric micro-prisms. The main feature of a refractive sail is to give a large transverse component of thrust even when the sail nominal plane is orthogonal to the Sun-spacecraft line. Starting from the recent literature results, this paper proposes a semi-analytical thrust model that estimates the characteristics of the propulsive acceleration vector as a function of the sail attitude angles. Such a mathematical model is then used to analyze a simplified Earth-Mars and Earth-Venus interplanetary transfer within an optimal framework.     

Solar sailing in realistic mode,based on a locally-optimal control laws

Ballistic design of solar sailing missions in the solar system is composed of defining the design parameters, the control programs, and the trajectories that provide performance goals of a flight. The use of a solar sail spacecraft imposes specific restrictions on mission parameters that include the degradation limit on the flight duration, the maximum temperature of solar sail's surface, the minimum distance from the Sun, the maximum angular velocity of the spacecraft's rotation and others.Many authors considered the impact of these restrictions on the design of the mission separately, but they used a sophisticated method of finding the exact optimal motion control or applied the most straightforward laws of motion control. This paper uses local-optimal control laws at the complete mathematical models of motion and functioning of solar sail spacecraft to describe a technique of designing interplanetary missions. The described method avoids the need to obtain an accurate optimal solution to the control problem and does not cause significant computational difficulties.     

Performance analysis and mission applications of a new solar sail concept based on crossed booms with tip-deployed membranes

For precursor solar sail activities a strategy for a controlled deployment of large membranes was developed based on a combination of zig-zag folding and coiling of triangular sail segments spanned between crossed booms. This strategy required four autonomous deployment units that were jettisoned after the deployment is completed. In order to reduce the complexity of the system an adaptation of that deployment strategy is investigated.A baseline design for the deployment mechanisms is established that allows the deployment actuation from a central bus system in order to reduce the complexity of the system. The mass of such a sail craft will be slightly increased but its performance is still be reasonable for first solar sail missions.The presented design will be demonstrated on breadboard level showing the feasibility of the deployment strategy. The characteristic acceleration will be evaluated and compared to the requirements of certain proposed solar sail missions.