Concept study on Deep Space Orbit Transfer Vehicle

In this paper, the concept of Orbit Transfer Vehicle for Deep Space Exploration (Deep Space OTV) is proposed, and its effectiveness and feasibility are discussed. Basic concept is the separation of two functions required for the deep space exploration, the transportation to the destination, and the exploration at the destination. Deep Space OTV is a spacecraft specialized for the transportation to the deep space destination. It is an expendable spacecraft propelled by solar electric propulsion. The payload of Deep Space OTV is Explorer, which is a spacecraft specialized for the exploration at the deep space destination. The effectiveness of the concept is discussed qualitatively, focused on the merits of the separations of two functions. The feasibility of Deep Space OTV is discussed based on the conceptual design of the spacecraft and its applicability to deep space missions. Several deep space missions are modeled and the payload capacity of Deep Space OTV is estimated. The missions include Asteroid rendezvous, Mars orbiter, Lunar lander, and so on.     

Concept study on Deep Space Orbit Transfer Vehicle

In this paper, the concept of Orbit Transfer Vehicle for Deep Space Exploration (Deep Space OTV) is proposed, and its effectiveness and feasibility are discussed. Basic concept is the separation of two functions required for the deep space exploration, the transportation to the destination, and the exploration at the destination. Deep Space OTV is a spacecraft specialized for the transportation to the deep space destination. It is an expendable spacecraft propelled by solar electric propulsion. The payload of Deep Space OTV is Explorer, which is a spacecraft specialized for the exploration at the deep space destination. The effectiveness of the concept is discussed qualitatively, focused on the merits of the separations of two functions. The feasibility of Deep Space OTV is discussed based on the conceptual design of the spacecraft and its applicability to deep space missions. Several deep space missions are modeled and the payload capacity of Deep Space OTV is estimated. The missions include Asteroid rendezvous, Mars orbiter, Lunar lander, and so on.     

Earth based observations of the STS-11 space shuttle mission on orbit and during reentry

While much of what is known about the performance of spacecraft in flight is learned by monitoring telemetry data streams, this paper describes some unique observations made with ground-based astronomical equipment, done in conjunction with the tenth flight of the U.S. Space Shuttle. The study had two main objectives: to test the ability of low-cost, low-light-level television equipment to monitor satellites in orbit, and to attempt visual and photographic observation of the reentry characteristics of a Space Shuttle Orbiter. Both efforts met with considerable success and are described herein.     

A parametric study of space transfer/upper propulsion stages

For Space Transportation System (i.e. Space Shuttle) launched satellites destined for a Geosynchronous Earth Orbit (GEO), there is a need for cost-effective, versatile propulsion systems to provide the perigee burn, i.e. to boost the satellite from Low Earth Orbit (LEO) to Geosynchronous Transfer Orbit (GTO). Surveys of commercial spacecraft activities and future GEO satellite requirements indicate that a spacecraft propulsion system that will provide the perigee burn for a broad range of future commercial satellites would have an excellent market potential.Parametric studies to investigate and define attractive perigee-burn upper propulsion systems (i.e. an Upper Propulsion Stage, or a UPS) are presented. The feasibility and payload capacilities that could be provided by a UPS assembled from essentially off-the-shelf components and subsystems, and the benefits that could be achieved by using major subsystems specifically tailored for the application are presented. The results indicate that attractive UPS configurations can be defined using either off-the-shelf or optimized major subsystems.     

Efficient payload processing: the opposite side of frequent space shuttle launches

The planned rate of up to 40 Space Shuttle missions per year from the Kennedy Space Center requires a matching payload processing capability that must be efficient and economical. Five facilities are being converted to handle spacecraft assembly and checkout, two to handle explosives and other dangerous spacecraft components, and one for total payload integration. New handling and transporting equipment is being built, and new procedures established. This paper presents an overview of the processing cycles of the two presently known types of payloads, their integration into Shuttle-ready cargos, and the installation of the cargo into the Space Shuttle Orbiter.     

Solar Orbiter—Heat shield and system technology

Solar Orbiter will enhance our knowledge of the Sun by observations and in situ measurements as close as 0.22 AU from our star. Placed on an orbit with a period two-thirds the one of Venus, Solar Orbiter will use the many encounters with the planet to gradually incline its orbit and gain view on the Sun's poles. The permanent in situ observations will be associated to remote-sensing observations over large parts of the orbits.ESA Science Directorate has awarded in parallel two Solar Orbiter Heat Shield and System Technology contracts to industry. This paper presents the achievements of Thales Alenia Space thanks to one of these two ESA contracts.It shows how the main technical challenge brought by the heat flux of 20 solar constants has been addressed by the system and heat shield design. The design and manufacturing of a breadboard of the heat shield in view of thermal test verification is then reported. The main technological developments and residual risks are assessed, paving the way for the definition phase of the program.     

The management of the geostationary environment

The population in the geostationary orbit is increasing at the rate of about 25 spacecraft a year and operating lifetimes are increasing. The size of the spacecraft is increasing, as is the power level. The only way to protect the operational arc is to reboost spacecraft at end of life to a burial orbit. While most operators do some reboost maneuver at end of mission there has been no agreed upon criterion for the maneuver. The ITU-R S. 1003¹ recommends reboost of not less than 300 km with the apogee as high as possible. The Interagency Debris Coordination Working Group (IADC) has recently achieved a consensus on a recommendation that the minimum maneuver be 235 km + Cr 1000 A/M. The concept is that this accommodates the ± 3 7.5 km variance in normal radial positioning and a 167.5 km corridor above the arc for repositioning or supersynchronous delivery and establishes a criterion by which the dispositioned spacecraft will never enter that zone after its completion of the maneuver. It also deals with the fact the area mass ratio of spacecraft has been evolving to higher values. Earlier spacecraft had characteristic values of 0.03 but the average now is closer to 0.05 and there are some as great as 0.10.

Disposition of the upper stage should be the same as the spacecraft if it is delivered to GSO. It is preferable to have the stage deliver the spacecraft supersynchronous and then have the spacecraft maneuver down to the GSO.     

空间碎片减缓策略效果仿真

根据机构间空间碎片协调委员会(IADC)和欧空局(ESA)的空间碎片减缓要求,在建立航天发射、爆炸和碰撞模型,以及碎片演化机制的基础上,对常规发射(BAU)、禁止在轨爆炸(NO-EX)和全面减缓(MIT)三种空间碎片减缓策略条件下,对2000~2100年空间碎片环境进行了仿真计算。结果表明,禁止航天器在轨爆炸、对失效的卫星和火箭上面级实施离轨操作,以及在航天器的发射和运行中不产生或抛弃分离物等减缓措施是限制空间碎片数量增长的有效方法。     

Return to Venus of the Japanese Venus Climate Orbiter AKATSUKI

Japanese Venus Climate Orbiter/AKATSUKI was proposed in 2001 with strong support by international Venus science community and approved as an ISAS (The Institute of Space and Astronautical Science) mission soon after the proposal. The mission life we expected was more than two Earth years in Venus orbit. AKATSUKI was successfully launched at 06:58:22JST on May 21, 2010, by H-IIA F17. After the separation from H-IIA, the telemetry from AKATSUKI was normally detected by DSN Goldstone station (10:00JST) and the solar cell paddles’ deployment was confirmed. After a successful cruise, the malfunction happened on the propulsion system during the Venus orbit insertion (VOI) on Dec. 7, 2010. The engine shut down before the planned reduction in speed to achieve. The spacecraft did not enter the Venus orbit but entered an orbit around the Sun with a period of 203 days. Most of the fuel still had remained, but the orbital maneuvering engine was found to be broken and unusable. However, we have found an alternate way of achieving orbit by using only the reaction control system (RSC). We had adopted the alternate way for orbital maneuver and three minor maneuvers in Nov. 2011 were successfully done so that AKATSUKI would meet Venus in 2015. We are considering several scenarios for VOI using only RCS.     

Rosetta visits asteroid (21)Lutetia

The International Rosetta Mission, cornerstone of the European Space Agency Scientific Programme, was launched on 2nd March 2004 to its 10 years journey to comet Churyumov–Gerasimenko. Rosetta will reach the comet in summer 2014, orbit it for about 1.5 years down to distances of a few Kilometres and deliver the Lander Philae onto its surface. After its successful asteroid fly-by in September 2008, Rosetta came back to Earth, for the final gravity acceleration towards its longest heliocentric orbit, up to a distance of 5.3 AU. It is during this phase that Rosetta crossed for the second time the main asteroids belt and performed a close encounter with asteroid (21)Lutetia on the 10th of July 2010 at a distance of ca. 3160 km and a relative velocity of 15 km/s. The payload complement of the spacecraft was activated to perform highly valuable scientific observations. The approach phase to the celestial body required a careful and accurate optical navigation campaign that will prove to be useful also for the comet approach phase. The experience gained with first asteroid flyby in 2008 was fed back into the operations definition and preparation for this highly critical phase; this concerns in particular the operations of the navigation camera for the close-loop autonomous asteroid tracking and of the main scientific camera for high resolution imaging. It was shortly after the flyby that Rosetta became the solar-powered spacecraft to have flown furthest from the Sun (>2.72 AU). This paper presents the activities carried out and planned for the definition, preparation and implementation of the asteroid flyby mission operations, including the test campaign conducted to improve the performance of the spacecraft and payload compared to the previous flyby. The results of the flyby itself are presented, with the operations implemented, the achieved performance and the lessons learned.     

Flight demonstration of new thruster and green propellant technology on the PRISMA satellite

The concept of a storable liquid monopropellant blend for space applications based on ammonium dinitramide (ADN) was invented in 1997, within a co-operation between the Swedish Space Corporation (SSC) and the Swedish Defense Research Agency (FOI). The objective was to develop a propellant which has higher performance and is safer than hydrazine. The work has been performed under contract from the Swedish National Space Board and ESA. The progress of the development has been presented in several papers since 2000.ECAPS, a subsidiary of the Swedish Space Corporation was established in 2000 with the aim to develop and market the novel “high performance green propellant” (HPGP) technology for space applications. The new technology is based on several innovations and patents w.r.t. propellant formulation and thruster design, including a high temperature resistant catalyst and thrust chamber.The first flight demonstration of the HPGP propulsion system will be performed on PRISMA. PRISMA is an international technology demonstration program with Swedish Space Corporation as the Prime Contractor.This paper describes the performance, characteristics, design and verification of the HPGP propulsion system for PRISMA. Compatibility issues related to using a new propellant with COTS components is also discussed. The PRISMA mission includes two satellites in LEO orbit were the focus is on rendezvous and formation flying. One of the satellites will act as a “target” and the main spacecraft performs rendezvous and formation flying maneuvers, where the ECAPS HPGP propulsion system will provide delta-V capability.The PRISMA CDR was held in January 2007. Integration of the flight propulsion system is about to be finalized.The flight opportunity on PRISMA represents a unique opportunity to demonstrate the HPGP propulsion system in space, and thus take a significant step towards its use in future space applications. The launch of PRISMA scheduled to 2009.     

System test results from the GNC experiments on the PRISMA in-orbit test bed

The PRISMA in-orbit test bed will demonstrate guidance, navigation, and control strategies for spacecraft formation flying and rendezvous. The project is funded by the Swedish National Space Board and the prime contractor is the Swedish Space Corporation. The project is further supported by the German Aerospace Center, the Technical University of Denmark, and the French Space Agency. PRISMA was launched on June 15, 2010 and after three weeks of operations, all on-board systems and units have passed an initial commissioning phase. Separation of the two PRISMA satellites from each other is expected by mid-August 2010.PRISMA consists of two spacecraft: MAIN and TARGET. The MAIN spacecraft has full orbit control capability while TARGET is attitude controlled only.The Swedish Space Corporation is responsible for three groups of guidance, navigation, and control experiments. These experiments include GPS- and vision-based formation flying during which the spacecraft will fly in passive as well as forced motion. The three experiments are: autonomous formation flying, proximity operations with final approach/recede maneuvers, and autonomous rendezvous. This paper presents system test results from two of these experiments as obtained with the flight-ready system. The system tests consist of a series of simulations performed on the flight model spacecraft with a large amount of hardware in the loop.     

Identification and status of design improvements to the NASA Shuttle EMU for International Space Station application

To meet the significant increase in EVA demand to support assembly and operations of the International Space Station (ISS), NASA and industry have improved the current Shuttle Extravehicular Mobility Unit (EMU), or "space suit", configuration to meet the unique and specific requirements of an orbital-based system. The current Shuttle EMU was designed to be maintained and serviced on the ground between frequent Shuttle flights. ISS will require the EMUs to meet increased EVAs out of the Shuttle Orbiter and to remain on orbit for up to 180 days without need for regular return to Earth for scheduled maintenance or refurbishment. Ongoing Shuttle EMU improvements have increased reliability, operational life and performance while minimizing ground and on-orbit maintenance cost and expendable inventory. Modifications to both the anthropomorphic mobility elements of the Space Suit Assembly (SSA) as well as to the Primary Life Support System (PLSS) are identified and discussed. This paper also addresses the status of on-going Shuttle EMU improvements and summarizes the approach for increasing interoperability of the U.S. and Russian space suits to be utilized aboard the ISS.     

A new generation of space engines

A primary method of launching future spacecraft will be the Space Transportation System (STS). Studies have identified minimum length stages capable of lifting heavy and deployed payloads from the STS low-Earth orbit to geosynchronous Earth orbit using storage or cryogenic propulsion systems.

Aerojet TechSystems is presently developing two engines suitable for these stages, a storable engine in the few thousand pound thrust range, and a cryogenic engine with a thrust of only a few hundred pounds. The stringent life and performance requirements of these engines offer new technical challenges which can only be met through the consequent employment of novel materials and processes for the storable engine and through innovative design concepts for the cryogenic engine. The storable engine breadboard testing has been accomplished, and the flightweight development program will be complete by the end of this decade. A qualified engine is anticipated for service in the early 1990 time frame. The low thrust cryogenic engine lags this storable engine by approximately three years in development and availability.

This paper discusses the technical issues, their solutions, and the development status of these two engines.     

基于Orbiter的航天器升力式再入特性仿真

升力式再入是指航天器进入大气层时产生一定可控升力,对提高落点精度具有重要意义。为了研究升力式再入的动力学特性,采用Orbiter模拟器的应用程序接口,在其飞行动力学模型基础上,对航天器从低轨道升力式再入返回过程进行仿真。通过仿真试验,分析热流、过载、动压等参数的变化规律,初步摸清了升力式再入的动力学特性,并对升力式再入和弹道式再入仿真结果参数进行了比较和分析,结果表明升力式再入能很好解决过载和热流峰值高的问题。     

Using computer graphics to enhance astronaut and systems safety.

Computer graphics is being employed at the NASA Johnson Space Center as a tool to perform rapid, efficient and economical analyses for man-machine integration, flight operations development and systems engineering. The Operator Station Design System (OSDS), a computer-based facility featuring a highly flexible and versatile interactive software package, PLAID, is described. This unique evaluation tool, with its expanding data base of Space Shuttle elements, various payloads, experiments, crew equipment and man models, supports a multitude of technical evaluations, including spacecraft and workstation layout, definition of astronaut visual access, flight techniques development, cargo integration and crew training. As OSDS is being applied to the Space Shuttle, Orbiter payloads (including the European Space Agency's Spacelab) and future space vehicles and stations, astronaut and systems safety are being enhanced. Typical OSDS examples are presented. By performing physical and operational evaluations during early conceptual phases. supporting systems verification for flight readiness, and applying its capabilities to real-time mission support, the OSDS provides the wherewithal to satisfy a growing need of the current and future space programs for efficient, economical analyses.     

Shuttle-era experiments in the area of plasma flow interactions with bodies in space

A new experimental approach is discussed in general terms, that can be adopted in the Shuttle/Spacelab era starting in the 1980s for studies in the area of plasma flow interactions with bodies in space. The potential use of the Space Shuttle/Orbiter as a near Earth plasma laboratory for studies in the area of Space Plasma Physics and particularly in the area of Solar-System Plasmas is discussed. This new experimental approach holds great promise for studies in the Supersonic and sub-Alfvenic flow regime which has applications to the motion of natural satellites around their mother planets in the Solar-system (e.g. the satellite Io around the planet Jupiter). A well conceived experimental and theoretical program, can lead to a better physical understanding regarding the validity and range of applicability of using gas-dynamic, kinetic and fluid approaches in describing collisionless plasma flow interactions with bodies in a variety of flow regimes.In addition to the above scientific aspects of the program, significant technological advances can be achieved regarding the interaction of space probes in planetary atmospheres/ionospheres and the reliability of using various plasma diagnostic devices on board spacecraft and large space platforms.     

A preliminary assessment of an orbiter in the Haumean system: How quickly can a planetary orbiter reach such a distant target?

With the recent discoveries of planetary objects beyond Neptune and Pluto, the vast majority of all sizeable Solar System planetary objects lie now beyond Uranus, where insertion into orbit after a reasonably short travel is still not within the current capabilities of our spacecraft. Being able to go and stop at a transneptunian dwarf planet would represent a step stone for ambitious long-term goals. The pressure to send spacecraft to these bodies will grow, as, among the tens or hundreds of large objects, some will emerge as high priorities for science and exploration missions. It is subsequently necessary to prepare the technologies required for such spacecraft. In addition, being able to achieve a fast journey to a distant object will benefit also missions to closer targets.Thales Alenia Space has carried out a preliminary parameter exploration of such a mission with a challenging target: an orbiter in the Haumean system. The main parameters are the characteristics of the propulsion and power system, as well as the masses of the spacecraft. The exploration has inferred the technological improvement needed for reaching these objects within a reasonable time.     

Design of optimal earth pole-sitter transfers using low-thrust propulsion

Recent studies have shown the feasibility of an Earth pole-sitter mission using low-thrust propulsion. This mission concept involves a spacecraft following the Earth's polar axis to have a continuous, hemispherical view of one of the Earth's poles. Such a view will enhance future Earth observation and telecommunications for high latitude and polar regions. To assess the accessibility of the pole-sitter orbit, this paper investigates optimum Earth pole-sitter transfers employing low-thrust propulsion. A launch from low Earth orbit (LEO) by a Soyuz Fregat upper stage is assumed after which solar electric propulsion is used to transfer the spacecraft to the pole-sitter orbit. The objective is to minimize the mass in LEO for a given spacecraft mass to be inserted into the pole-sitter orbit. The results are compared with a ballistic transfer that exploits manifold-like trajectories that wind onto the pole-sitter orbit. It is shown that, with respect to the ballistic case, low-thrust propulsion can achieve significant mass savings in excess of 200 kg for a pole-sitter spacecraft of 1000 kg upon insertion. To finally obtain a full low-thrust transfer from LEO up to the pole-sitter orbit, the Fregat launch is replaced by a low-thrust, minimum time spiral, which provides further mass savings, but at the cost of an increased time of flight.     

基于IGRF地磁场模型的航天器地磁干扰力矩数值仿真

航天器长期在轨运行期间,空间磁场与其自身磁矩相互作用的累积,会对航天器的姿态造成较大影响,加重姿态控制系统负担,降低航天器的可靠性。文章分别针对航天器轨道计算及地磁场模型的使用,对航天器地磁干扰力矩数值的仿真进行了系统的研究,最终得到航天器在轨运行时地磁干扰力矩计算仿真方法。