基于改进型CFAR的SAR图像目标检测算法

针对传统的双参数恒虚警率(Constant False Alarm Rate,CFAR)算法存在的虚警率高、实现过程繁琐、算法执行效率低等问题,提出了一种改进型的CFAR检测算法。该算法根据SAR图像的统计直方图,对可疑的目标像素进行预筛选,再用2个滑动窗口对像素进行判别。改进型的CFAR检测算法简化了原检测算法的结构,降低了检测结果的虚警率,提高了算法的计算效率,并在国际公开的雷达数据集上进行软件与DSP硬件的应用验证,测试表明该算法的有效性。     

基于双边截断的双参数海上风电站 SAR图像 CFAR检测

文章提出了 1种基于双边截断的双参数海上风电站 SAR图像 CFAR检测器 DTCS-TPCFAR,目的是提高在具有多个目标海上区域和石油泄漏区域等环境下对海上风电站的检测性能。DTCS-TPCFAR所提出的双边截断杂波的方法,能够同时消除高强度和低强度异常值的干扰,同时保留真实的杂波样本。通过使用最大似然估计计算双边截断后样本的均值和标准差,然后通过这 2个参数估计值计算出截断阈值,最后再结合指定的虚警率(Probability of False Alarm,PFA)来对测试单元(Test Cell,TC)进行判断,完成最终的目标检测。这也是首次将 CFAR检测器用于检测海上风电站。文章通过 Sentinel-1数据集来验证该方法的有效性。实验结果表明,文章所提出的算法在相同指定虚警率下,具有更高的检测率(Detection Rate,DR)和更低的误报率(False Alarm Rate,FAR)。     

基于时频分析的双通道SAR自旋目标检测

强地杂波背景给微动目标检测带来很大困难,为此在详细分析距离向压缩数据域自旋目标回波特性基础上,提出了基于双通道合成孔径雷达相位中心偏置天线(SAR/DPCA)和沿航迹干涉(ATI)杂波抑制的两类自旋目标检测方法,并作比较分析.在DPCA模式下,微多普勒频率沿频率(m-D)轴有一整体平移量,其与目标自旋中心的方位向坐标成...     

一种超高分辨率机载聚束SAR两维自聚焦算法

受运动参数测量误差和大气扰动等因素影响,合成孔径雷达(SAR)图像通常会发生散焦,利用自聚焦对散焦的SAR图像进行后处理是一种有效的重聚焦手段。传统的自聚焦算法都只是针对方位一维相位误差的估计和补偿。随着成像分辨率的提高,自聚焦时残留距离徙动的校正成为SAR成像面临的一个新挑战。本文推导得到了极坐标格式算法处理后残留距离徙动和方位相位误差的解析表达式,分析了两者之间的内在关系,并利用该关系,提出了一种能够同时进行残留距离徙动和方位相位误差补偿的两维自聚焦算法。实测数据处理结果表明,在残留距离徙动效应不可忽略的条件下,该方法能够极大地改善原有自聚焦算法的聚焦性能。     

三维模型在SAR图像自动目标识别中的应用

提高高分辨率SAR图像在复杂战场环境中的目标识别能力,对防御未来战争中来自地面目标的威胁具有重要意义。针对地面特定目标的大小、方位、旋转等变化以及强杂波背景给目标识别带来的严重影响,提出将目标的三维模型投影到二维平面,采用余弦傅里叶矩和瑞利分布的CFAR检测方法分别对其矩特征和峰值特征进行提取,利用级联组合分类器对目标识别进行建模分析,并通过试验验证该方法的有效性。结果表明:该方法实现了在特征维数高和姿态变化下的目标识别,而且无需额外增加对制导控制系统的开销。     

一种机动多目标雷达视频信号模拟器的设计

给出了一种机动多目标雷达视频信号模拟器的软硬件设计方案,它可实时输出所需的多个动目标雷达视频信号,雷达信号的类型、目标的数量、目标的回波特性、目标的运动特性、杂波的类型及参数等均可方便地进行设置。该模拟器可满足各种雷达信号处理算法(如杂波抑制、恒虚警检测、动目标跟踪、多基地数据融合等)的测试与效果分析,以及对雷达信号处理机等进行性能调试与测试的需要。     

一种FMCW SAR地面运动目标谱图域参数估计方法

对调频连续波(FMCW)合成孔径雷达(SAR)地面运动目标的参数估计方法进行了研究,采用相位中心偏置天线(DPCA)技术对地杂波进行抑制,分析了载机及地面运动目标连续运动对回波信号的影响,推导了采用DPCA技术引入的回波慢时间包络(STE)项与地面运动目标参数之间的关系。在此基础上,提出了一种地面运动目标谱图域参数估计方法,该方法首先利用Radon变换在谱图域估计导致回波信号距离走动的目标等效径向速度,并对距离走动进行校正;其次,在谱图域中提取运动目标回波幅度,根据STE项引起的回波幅度变化与目标方位向速度之间的关系,估计目标的方位向速度,并进一步求解相应的目标径向速度。所提方法能够在谱图域完成地面运动目标二维速度估计,最后的仿真实验验证了所提方法的有效性和可行性。     

基于CZT的机载并行双站斜视SAR成像算法

建立了机载并行双站斜视合成孔径雷达(SAR)的几何模型,给出了雷达回波的数学表达式,推导了它的二维频谱并对其特点做了分析。在二维频域内,先用聚焦函数对观测场景中心的点目标做精确成像,然后用Chirp-Z变换(CZT)校正中心点两侧目标回波的距离徙动,再通过方位向逆傅里叶变换得到了雷达图像。该算法利用了CZT能够处理非线性调频信号的特点,简化了处理过程,提高了计算效率和成像精度。仿真实验验证了这种基于CZT的新算法在处理并行双站斜视SAR数据时的有效性。     

一种新的非平行轨迹机载双站斜视SAR成像算法(英文)

本文提出了一种用于非平行轨迹机载双站斜视SAR条带模式成像的新的解析算法。该算法用收、发雷达的多普勒调频率贡献比为加权系数推导了点目标回波的二维频谱。通过解目标位置相对于收、发载机飞行轨迹的耦合,将这个二维频谱中目标的距离参数和方位参数进行了分离。在二维频域内,补偿掉双站扭曲项后利用二维Chirp-Z变换(2D-CZT)校正了距离向和方位向的徙动,获得了精确聚焦的目标图像。雷达回波的二维残余徙动用沿距离向和方位向的分块来限制,推导了数据分块的条件,由此可以实现宽场景成像。仿真试验验证了这种2D-CZT算法的有效性。     

非高斯杂波下自适应雷达目标检测新方法

在球不变随机向量(SIRV)非高斯杂波背景下,研究了多脉冲相参雷达目标的自适应检测问题。假设杂波具有相同的协方差矩阵结构和可能相关的纹理分量,提出了新的协方差矩阵估计器,并获得了相应的自适应归一化匹配滤波器(ANMF)。理论分析表明,在估计杂波分组大小与实际情况匹配时,所获得的ANMF对杂波功率水平和协方差矩阵结构均具有恒虚警率(CFAR)特性。仿真结果表明:当估计的杂波分组大小失配时,所获得的ANMF具有近似CFAR特性,并进一步分析了不同参数变化对所提检测器性能的影响。与已有的ANMF相比,所获得的ANMF具有更好的检测性能,且迭代次数更小,其相对于已知杂波协方差矩阵的最优归一化匹配滤波器(NMF)的检测损失也更小,具有很好的实际应用前景。     

Matched subspace CFAR detection of hovering helicopters

A constant false alarm rate (CFAR) strategy for detecting a Gaussian distributed random signal against correlated non-Gaussian clutter is developed. The proposed algorithm is based on Scharf's matched subspace detector (MSD) and has the CFAR property with respect to the clutter amplitude probability density function (apdf), provided that the clutter distribution belongs to the compound-Gaussian family and the clutter covariance matrix is known to within a scale factor. Analytical expressions of false alarm and detection probabilities are derived. An application to the problem of detecting hovering helicopters against vegetated ground clutter is reported     

Prescreening during image formation for ultrawideband radar

Standard radar image formation techniques waste computational resources by full resolving all areas of the scene, even regions of benign clutter. We introduce a multiscale prescreener algorithm that runs as part of the image formation processing step for ultrawideband (UWB) synthetic aperture radar (SAR) systems. The prescreener processes intermediate radar data generated by a quadtree backprojection image former. As the quadtree algorithm iterates, it is resolving increasingly finer subpatches of the scene. After each quadtree stage, the prescreener makes an estimate of the signal-to-background ratio of each subpatch and applies a constant false alarm rate (CFAR) detector to decide which ones might contain a target of interest. Whenever the prescreener determines that a subpatch is not near a detection, it cues the image former to terminate further processing of that subpatch. Using a small database of UWB radar field data, we demonstrate that the prescreener is able to decrease the overall computational load of the image formation process. We also show that the new multiscale prescreener method produces fewer false alarms than the conventional two-parameter CFAR prescreener applied to the completely formed image     

Data quantization effects in CFAR signal detection

In this paper, we investigate data quantization effects in constant false alarm rate (CFAR) signal detection. Exponential distribution for the input data and uniform quantization are assumed for the CFAR detector analysis. Such assumptions are valid in the case of radar for a Swerling I target in Gaussian clutter plus noise and a receiver with analog square-law detection followed by analog-to-digital (A/D) conversion. False alarm and detection probabilities of the cell averaging (CA) and order statistic (OS) CFAR detectors operating on quantized observations are analytically determined. In homogeneous backgrounds with 15 dB clutter power fluctuations, we show analytically that a 12-bit uniform quantizer is sufficient to achieve false alarm rate invariance. Detector performance characteristics in nonhomogeneous backgrounds, due to regions of clutter power transitions and multiple interfering targets, are also presented and detailed comparisons are given     

A variably trimmed mean CFAR radar detector

A variably trimmed mean (VTM) constant false alarm rate (CFAR) detector in which the threshold is determined by processing a linear combination of a group of ordered samples in each window is introduced. Unlike the trimmed mean detector, the number of ordered samples that require further processing is allowed to vary according to a data-dependent rule. It is demonstrated that the VTM detector exhibits performance characteristics that are independent of the total (stationary) noise power. Simulated performance results are presented for regions of clutter power transitions and for multiple target environments to illustrate the possible improvement over the order-statistic detector that can be obtained by using a VTM detector     

一种全自动的检测方法用于SAR-ATI的GMTI

针对星载SAR-ATI处理的中间结果,提出了一种称为"两步-类高斯拟合"完全自适应的检测方法。该方法可以完全自动地实现杂波和噪声中的运动目标检测,避免了传统方法作联合高斯数据的假定,无须推导SAR-ATI干涉图的理论概率密度函数。此外,该方法还可以大大降低系统的虚警概率并用仿真研究了最小可检测速度。     

Sum-difference Reduced-dimensional Processing in SAR Image Domain and Statistical Analysis for Ground Moving Target Indication

In this article, a new reduced-dimensional adaptive processing algorithm based on joint pixels sum-difference data for clutter rejection is proposed. The sum-difference data are obtained by orthogonal projection of the joint pixels data of different synthetic aperture radar (SAR) images generated by a multi-satellite radar system. In the sense of statistical expectation, the sum-differ- ence data contain the common and different information of the SAR images. Therefore, the objective of clutter cancellation can be achieved by adaptive processing. Moreover, based on the residual image after clutter rejection, statistical analysis of constant false-alarm rate (CFAR) detection of moving targets is also presented. Simulation results demonstrate the effectiveness and robustness of the proposed algorithm even with heterogeneous clutter and image co-registration error.     

Polarization diversity detection in compound-Gaussian clutter

We present the problem of polarization diversity detection in compound-Gaussian clutter with unknown covariance matrix. To this end we assume that a set of secondary data, free of signal components and with the same covariance structure of the cell under test, is available. Due to the lack of a uniformly most powerful (UMP) detector we resort to a design procedure based upon the Rao and the Wald tests. Specifically we first derive the Rao and the Wald tests assuming that the covariance matrix is known, and then we substitute into the derived decision rules a suitable estimate of the clutter covariance. Interestingly, the newly proposed detectors share the constant false alarm rate (CFAR) property with respect to the texture statistical characterization. Moreover simulation results have shown that the Wald test based detector ensures a performance level higher than the Rao test. We have also conducted a further performance analysis, in the presence of real clutter data and in comparison with the previously proposed generalized likelihood ratio test (GLRT) based receivers, which highlights that, in general, the Wald test receiver outperforms its counterparts. Finally, since the newly proposed decision rules as well as the previously designed GLRTs do not ensure the CFAR property with respect to the clutter covariance matrix, we have developed a sensitivity analysis on the probability of false alarm (P/sub fa/), based on simulated clutter with covariance matrix estimated from real radar data. The results have shown that (P/sub fa/) is only slightly affected by variations in the clutter correlation properties and hence the CFARness is substantially achieved.     

A Detection Algorithm for Optical Targets in Clutter

There is active interest in the development of algorithms for detecting weak stationary optical and IR targets in a heavy opticalclutter background. Often only poor detectability of low signal-to-noise ratio (SNR) targets is achieved when the direct correlation method is used. In many cases, this is partly obviated by using detection with correlated reference scenes [1, 2].This paper uses the experimentally justified assumption that most optical clutter can be modeled as a whitened Gaussian randomprocess with a rapidly space-varying mean and a more slowlyvarying covariance [2]. With this assumption, a new constant falsealarm rate (CFAR) detector is developed as an application of the classical generalized maximum likelihood ratio test of Neyman and Pearson. The final CFAR test is a dimensionless ratio. This test exhibits the desirable property that its probability of a false alarm(PFA) is independent of the covariance matrix of the actual noiseencountered. When the underlying noise processes are complex intime, similar considerations can yield a sidelobe canceler CFARdetection criterion for radar and communications. Performance analyses based on the probability of detection (PD)versus signal-to-noise ratio for several given fixed false alarm probabilities are presented. Finally these performance curves are validated by computer simulations of the detection process which use real image data with artificially implanted signals.     

Target prescreening based on a quadratic gamma discriminator

This work presents the development, analysis and validation of a new target discrimination module for synthetic aperture radar (SAR) imagery based on an extension of gamma functions to 2-D. Using the two parameter constant false-alarm rate (CFAR) stencil as a prototype, a new stencil based on 2-D gamma functions is used to estimate the intensity of the pixel under test and its surroundings. A quadratic discriminant function is created from these estimates, which is optimally adapted with least squares in a training set of representative clutter and target chips. This discriminator is called the quadratic gamma discriminator (QGD). The combination of the CFAR and the QGD was tested in realistic SAR environments and the results show a large improvement of the false alarm rate with respect to the two-parameter CFAR, both with high resolution (1 ft) fully polarimetric SAR and with one polarization, 1 m SAR data