A Model for Generating Synthetic VHF SAR Forest Clutter Images

We propose a model for generating low-frequency synthetic aperture radar (SAR) clutter that relates model parameters to physical characteristics of the scene. The model includes both distributed scattering and large-amplitude discrete clutter responses. The model also incorporates the SAR imaging process, which introduces correlation among image pixels. The model may be used to generate synthetic clutter for a range of environmental operating conditions for use in target detection performance evaluation of the radar and automatic target detection/recognition algorithms. We derive a statistical representation of the proposed clutter model's pixel amplitudes and compare with measured data from the CARABAS-II SAR. Simulated clutter images capture the structure and amplitude responses seen in the measured data. A statistical analysis shows an order of magnitude improvement in model fit error compared with standard maximum-likelihood (ML) density fitting methods.     

非均匀环境下利用单个数据集的STAP算法

对非均匀环境下利用单个数据集的机载雷达空时自适应处理(SDS-STAP)算法进行了研究。针对现有单个数据集类空时自适应算法存在的问题,提出了一种基于对待测数据集进行空时二维滑窗处理的二维幅度相位估计(2D-APES)算法。该算法利用回波的统计信息,不仅放宽了算法处理器对于雷达系统阵元数与脉冲数选取的约束,而且能够有效抑制杂波及待测单元内的干扰,同时降低了处理器的计算复杂度。最后,仿真数据及实测数据实验验证了所提算法的正确性与有效性。     

基于改进型CFAR的SAR图像目标检测算法

针对传统的双参数恒虚警率(Constant False Alarm Rate,CFAR)算法存在的虚警率高、实现过程繁琐、算法执行效率低等问题,提出了一种改进型的CFAR检测算法。该算法根据SAR图像的统计直方图,对可疑的目标像素进行预筛选,再用2个滑动窗口对像素进行判别。改进型的CFAR检测算法简化了原检测算法的结构,降低了检测结果的虚警率,提高了算法的计算效率,并在国际公开的雷达数据集上进行软件与DSP硬件的应用验证,测试表明该算法的有效性。     

非正侧视阵列机载雷达多空间角补偿算法

 非正侧阵列机载雷达的杂波分布随距离变化而变化,各距离单元的杂波分布不再满足独立同分布条件,造成统计型空时自适应处理(STAP)处理器性能下降。本文提出了一种多空间角补偿(MSAC)的非正侧视机载雷达杂波抑制方法,该方法先通过角度-多普勒补偿(ADC)预处理以消除在谱中心处的杂波非均匀,然后采用MSAC法在多个多普勒方向使参考单元和待检测单元的杂波谱保持一致,从而进一步消除在其余方位的杂波非均匀。仿真结果表明了该方法的性能明显优于ADC法,且运算量增加不多。     

一种基于角度-多普勒补偿的均匀圆形

采用均匀圆形相控阵天线的机载雷达杂波分布随距离变化而变化,各距离单元的杂波不再满足独立同分布的条件,造成统计型空时自适应处理(STAP)器性能下降。基于此,本文建立了均匀圆形天线机载雷达模型,对其杂波分布进行了分析,得出了空间角随阵元数非线性变化的特性造成其杂波距离维分布非均匀的结论。研究了一种均匀圆形天线机载雷达杂波抑制方法,该方法先通过修正的角度-多普勒补偿(MADC)预处理消除在杂波谱中心处的非均匀,再利用基于导数更新(DBU)技术进一步减小在其他方位杂波的非均匀程度。仿真结果表明了该方法的有效性。     

Performance improvement for constellation SAR using signal processing techniques

A new concept of spaceborne synthetic aperture radar (SAR) implementation has recently been proposed - the constellation of small spaceborne SAR systems. In this implementation, several formation-flying small satellites cooperate to perform multiple space missions. We investigate the possibility to produce high-resolution wide-area SAR images and fine ground moving-target indicator (GMTI) performance with constellation of small spaceborne SAR systems. In particular, we focus on the problems introduced by this particular SAR system, such as Doppler ambiguities, high sparseness of the satellite array, and array element errors. A space-time adaptive processing (STAP) approach combined with conventional SAR imaging algorithms is proposed which can solve these problems to some extent. The main idea of the approach is to use a STAP-based method to properly overcome the aliasing effect caused by the lower pulse-repetition frequency (PRF) and thereby retrieve the unambiguous azimuth wide (full) spectrum signals from the received echoes. Following this operation, conventional SAR data processing tools can be applied to focus the SAR images fully. The proposed approach can simultaneously achieve both high-resolution SAR mapping of wide ground scenes and GMTI with high efficiency. To obtain array element errors, an array auto-calibration technique is proposed to estimate them based on the angular and Doppler ambiguity analysis of the clutter echo. The optimizing of satellite formations is also analyzed, and a platform velocity/PRF criterion for array configurations is presented. An approach is given to make it possible that almost any given sparse array configuration can satisfy the criterion by slightly adjusting the PRF. Simulated results are presented to verify the effectiveness of the proposed approaches.     

一种基于角度-多普勒补偿的均匀圆形天线机载雷达杂波抑制方法

采用均匀圆形相控阵天线的机载雷达杂波分布随距离变化而变化,各距离单元的杂波不再满足独立同分布的条件,造成统计型空时自适应处理(STAP)器性能下降。基于此,本文建立了均匀圆形天线机载雷达模型,对其杂波分布进行了分析,得出了空间角随阵元数非线性变化的特性造成其杂波距离维分布非均匀的结论。研究了一种均匀圆形天线机载雷达杂波抑制方法,该方法先通过修正的角度 多普勒补偿(MADC)预处理消除在杂波谱中心处的非均匀,再利用基于导数更新(DBU)技术进一步减小在其他方位杂波的非均匀程度。仿真结果表明了该方法的有效性。     

基于杂波对消-自聚焦的多通道SAR-GMTI

对超高频(UHF)波段多通道合成孔径雷达(SAR)动目标检测技术进行研究,解决了长相干积累时间导致动目标在方位向散焦严重的问题。采用分块自聚焦技术对多通道SAR地面移动目标指示(GMTI)系统自适应杂波抑制后的SAR图像进行处理,改善杂波抑制后的SAR图像中动目标的聚焦情况,增强动目标与周围剩余杂波的对比度,进而提高恒虚警率(CFAR)检测的性能。与传统杂波抑制后直接进行CFAR检测方法相比较,该方法降低了检测虚警概率。实测数据处理结果显示动目标的信杂比明显提高,动目标方位向聚焦成功,证明了该方法的有效性。     

Adaptive imaging for forward-looking ground penetrating radar

Most of the current forward-looking ground-penetrating radar (FLGPR) systems use conventional delay-and-sum (DAS) based methods to form radar images for detection of the target (such as a landmine). However, DAS is a data-independent approach which is known to suffer from low resolution and poor interference and clutter rejection capability. We present a data-adaptive imaging approach for FLGPR image formation based on APES (amplitude and phase estimation) and rank-deficient RCB (robust Capon beamforming). Due to the data-adaptive nature of both APES and RCB, our approach has better resolution and much better interference and clutter rejection capability than the standard DAS-based imaging methods. The excellent performance of the proposed method is demonstrated using experimental data collected via two FLGPR systems recently developed by PSI (Planning Systems, Inc.) and SRI (Stanford Research Institute).     

机载MIMO雷达空时自适应杂波对消器

针对机载多输入多输出(MIMO)雷达杂波分布呈现空时耦合特性,提出一种空时自适应杂波对消器.利用机载MIMO雷达的脉冲回波数据,构造杂波对消器的系数矩阵.通过空时自适应杂波对消器的预处理,可以有效地抑制杂波,并通过与常规空时处理算法的级联,最终可以有效提高动目标的检测性能.实现了由传统地基雷达杂波对消器向机载运动平台的推广.仿真结果表明,这种自适应杂波对消器不仅适用于正侧视雷达,对于非正侧视雷达也同样适用.     

基于3DT的空时自适应单脉冲参数估计算法

空时自适应处理(STAP)是机载预警雷达抑制杂波和干扰的一项关键技术,而多普勒三通道联合自适应处理(3DT)是适合工程实现的降维(RD)STAP方法。STAP目标检测后还需进一步估计目标的角度参数,因此将自适应单脉冲(AM)技术引入3DT,提出了一种高精度联合估计目标速度与方位空间角的空时自适应单脉冲算法。理论分析与仿真实验结果表明,当目标多普勒频率偏离检测多普勒单元中心频率时,该算法能同时减少目标多普勒跨越损失和空时导引矢量失配损失,进而提高输出信杂噪比(SCNR),改善目标测角精度。     

基于数值计算的机载SAR空变运动补偿算法

针对机载合成孔径雷达(SAR)高分辨率宽测绘带(HRWS)成像问题,在分析结合两步运动误差补偿的距离徙动算法基础上,提出一种基于数值计算的空变运动误差补偿算法。通过对粗聚焦图像进行分块,在子块的两维波数域进行空变运动补偿,补偿的相位包括方位相位误差、距离相位误差以及方位和距离的耦合相位,因此该算法在复杂航迹、高分辨和宽测绘带情况下仍具有较好的鲁棒性。最后对SAR仿真数据和实测数据进行处理,并与结合两步运动误差补偿的距离徙动算法进行比较,处理结果表明该算法能够更好地补偿空变运动误差。     

Prescreening during image formation for ultrawideband radar

Standard radar image formation techniques waste computational resources by full resolving all areas of the scene, even regions of benign clutter. We introduce a multiscale prescreener algorithm that runs as part of the image formation processing step for ultrawideband (UWB) synthetic aperture radar (SAR) systems. The prescreener processes intermediate radar data generated by a quadtree backprojection image former. As the quadtree algorithm iterates, it is resolving increasingly finer subpatches of the scene. After each quadtree stage, the prescreener makes an estimate of the signal-to-background ratio of each subpatch and applies a constant false alarm rate (CFAR) detector to decide which ones might contain a target of interest. Whenever the prescreener determines that a subpatch is not near a detection, it cues the image former to terminate further processing of that subpatch. Using a small database of UWB radar field data, we demonstrate that the prescreener is able to decrease the overall computational load of the image formation process. We also show that the new multiscale prescreener method produces fewer false alarms than the conventional two-parameter CFAR prescreener applied to the completely formed image     

Adaptive nulling of SAR sidelobe discretes

By using adaptive subarrays for crossrange imaging we have developed a computationally simple method that removes any image degradation caused by strong, discrete clutter located in the crossrange sidelobes of a synthetic aperture radar (SAR) image. The procedure is based on the minimization of the mean interference power with the constraint that the image of a desired scatterer is undistorted. The applicability of the approach has been illustrated by simulation     

一种机载雷达两级降维空时二维自适应处理方法

 提出了一种机载相控阵雷达杂波抑制的两级降维空时自适应处理(STAP)方法,即：先根据杂波分布先验信息进行空时局域化(JDL)降维处理,然后对局域化输出进行多级维纳滤波(MWF),实现二次降维。该方法综合了固定结构和自适应结构降维技术的优点,将JDL处理引入到MWF中,从而有效降低MWF的杂波自由度。计算机仿真和理论分析表明本文方法比JDL自适应处理方法和全空时MWF方法具有更小的运算量,对阵元随机幅相误差具有很好的容差能力,是一种稳健的两级降维自适应处理方法。最后,基于仿真和实测数据的实验验证了算法的有效性。     

块自适应球形矢量量化算法压缩SAR原始数据

提出使用块自适应球形矢量量化算法压缩SAR原始数据,该算法充分利用SAR原始数据经过自适应块处理之后在较小的数据块范围内具有稳定高斯分布的特点,使用格型矢量技术中的球形码书量化器进行量化,可以提高算法的压缩性能。通过运用球形矢量量化算法对SAR原始数据进行压缩、解压缩获取相应的SAR图像与块自适应量化和块自适应矢量量化经过同样过程得到SAR图像进行比较分析,得出块自适应球形格矢量量化算法是算法复杂度和算法性能之间比较好的折中。     

一种全自动的检测方法用于SAR-ATI的GMTI

针对星载SAR-ATI处理的中间结果,提出了一种称为"两步-类高斯拟合"完全自适应的检测方法。该方法可以完全自动地实现杂波和噪声中的运动目标检测,避免了传统方法作联合高斯数据的假定,无须推导SAR-ATI干涉图的理论概率密度函数。此外,该方法还可以大大降低系统的虚警概率并用仿真研究了最小可检测速度。     

Angle/Doppler estimation in heavy-tailed clutter backgrounds

This work describes new methods on the modeling of the amplitude statistics of airborne radar clutter by means of alpha-stable distributions. We develop joint target angle and Doppler, maximum likelihood-based estimation techniques from radar measurements retrieved in the presence of impulsive uncorrelated noise modeled as an alpha-stable random process. We derive the Cramer-Rao bounds (CRBs) for the additive Cauchy interference scenario to assess the best case estimation accuracy which can be achieved. In addition, we introduce a new joint spatial- and Doppler-frequency high-resolution estimation technique based on the fractional lower order statistics of the measurements of a radar array. Simulation results demonstrate that the proposed methods can be of interest in the study of space-time adaptive processing (STAP) for airborne pulse Doppler radar arrays operating in impulsive interference environments     

基于杂波子空间估计的MIMO雷达降维STAP研究

 多输入多输出(MIMO)雷达是近年来出现的一种新体制雷达,针对MIMO体制的机载雷达开展空时自适应处理（STAP）技术研究是值得进一步努力的方向。本文研究了机载MIMO雷达STAP技术的降维算法,通过对STAP技术杂波抑制原理进行分析,推导并得到一种基于杂波子空间的降维算法。结合扁长椭球波函数（PSWF）的特点,提出了一种基于杂波子空间估计的降维算法,并与若干降维算法的杂波抑制性能进行比较。结果表明,当存在阵元幅相误差时,该算法在保持杂波抑制性能的同时能够有效地降低STAP算法的运算量。     

A Data Compression Technique for Synthetic Aperture Radar Images

A data compression technique is developed for synthetic aperture radar (SAR) imagery. The technique is based on an SAR image model and is designed to preserve the local statistics in the image by an adaptive variable rate modification of block truncation coding (BTC). A data rate of approximately 1.6 bit/pixel is achieved with the technique while maintaining the image quality and cultural (pointlike) targets. The algorithm requires no large data storage and is computationally simple.