An Application of Radiometric Techniques to Precision Angle Tracking Radar Systems

A new technique is described which provides for precision angle tracking of celestial radio sources with a conventional monopulse antenna receiving system. It is shown that this technique is readily adapted to angle tracking radars. The features of conventional monopulse operation are preserved while permitting precise angle tracking of noise sources when signal to noise ratios are much less than unity. Measurements, using a four-horn monopulse feed with a 28-foot parabolic reflector and a "monopulse radiometer" produced the characteristic monopulse angle detection functions when using the sun, the moon, and Cassiopeia A as boresight reference sources. Precision measurements were made to 8 arc second under varying weather conditions using 28-foot radio astronomy antennas. The accuracy of the measurements were limited by the antenna angle encoders, consequently no conclusions are drawn with regard to the absolute accuracy of the measurements. The celestial coordinates of four discrete radio sources and the equations for coordinate transformation to local elevation and azimuth are contained in the Appendixes.     

Differential Lobing in Sidelobe Suppression Systems

The sidelobe suppression function in the secondary surveillance radar system is analyzed when separate main and control antenna are used. Their vertical lobing structures are not matched with each other, so a differential lobing pattern comes out whose maxima and minima are enveloped by smooth curves depending on vertical displacement of phase centers and horizon cutoff rates. The developed analysis provides a method for the evaluation of the system performance for any antenna configuration and for the determination of design guidelines.     

Monopulse Radar Air-ti-Ground Ranging

The use of a two-lobe monopulse radar for measuring slant range to the surface of the earth in the absence of discrete targets is analyzed. It is shown that tracking dispersion can be considered as the resultant of two components. One component is independent of range and results from the finite pulse length and gate length and the random nature of the return signals. The other component is due to receiver noise and increases as the signal-to-noise ratio decreases. The dispersion component independent of range is shown to be proportional to the pulse length and tracking gate length. The variable dispersion is shown to be proportional to the five halves power of the range and the three halves power of the cotangent of the depression angle of the antenna boresight axis. Performance calculations for a specific radar are carried out and compared with experimental data.     

3-D Radar Based on Phase-in-Space Principle

A height-finding technique utilizing the relative phase between a series of point sources of a traveling-wave array is described. The point sources in the focal region of a torus antenna are used to control the phase of the antenna elevation pattern in space. Signals received from a given beam angle will arrive at each terminal of the traveling-wave feed with a different phase. By comparing this phase with a reference phase, the angular direction of an arriving plane wave can be measured with considerable accuracy. Thus a radar system with a single antenna and feed structure can be employed to yield instantaneous height coverage along with the usual range data.     

反向交叉眼对单脉冲雷达干扰效果分析及仿真验证

交叉眼干扰被认为是对单脉冲雷达干扰最有效的方式之一。基于雷达方程建立了隔离平台回波下的两点源反向交叉眼干扰模型，推导了交叉眼干扰欺骗角一般性公式，研究了干扰机发射天线间距、干扰平台旋转角和干扰机相对雷达之间距离等参数变化对角度欺骗效果的影响，并依据单脉冲雷达接收机获取角度的信息处理流程，建立了单脉冲雷达接收机仿真模型，对交叉眼数学模型的正确性和局限性进行了分析。研究结果表明：单脉冲雷达越靠近两点源交叉眼干扰机中心线、干扰机两发射天线间距越大、与干扰机距离越近时，角度欺骗效果越好；单脉冲雷达的欺骗角度随着与干扰机距离的接近呈指数式增大；数学模型和仿真模型计算的单脉冲雷达角度误差最大值随干扰机天线与雷达天线中心连线的夹角的增大呈指数化增长。研究可为交叉眼干扰工程设计作参考。     

Small Ku-band phased array antenna system

A four-element phased array antenna prototype with varactor tuning has been constructed. The design employs aperture-fed quarter-wave patch elements and loaded-line phase shifters, having a phase adjustment range of about 50/spl deg/, which enables beam steering up to 13/spl deg/ from the array boresight. The system is suitable as a building block for larger arrays and shows as such a maximum gain of 7.7 dBi and an impedance bandwidth of 1 GHz. The sidelobe level is better than -13 dB. Problems encountered include parasitic resonances which disturb matching, and partially deteriorate the radiation pattern. Additionally, mechanical manufacturing tolerances of the microstrip boards were not always adequate, whereby a 6% shift in the center frequency, some impedance errors, and phasing inaccuracies were observed.     

Adaptive digital beamforming for angle estimation in jamming

A radar digital beamforming (DBF) architecture and processing algorithm is described for nulling the signal from a mainlobe electronic jammer and multiple sidelobe electronic jammers while maintaining monopulse angle estimation accuracy on the target. The architecture consists of a sidelobe jamming (SLJ) cancelling adaptive array (AA) followed by a mainlobe jamming (MLJ) canceller. A mainlobe maintenance (MLM) technique or constrained adaptation during the sidelobe cancellation process is imposed so that the results of the SLJ cancellation process do not distort the subsequent mainlobe cancellation process. The SLJ signals and the MLJ signals are thus cancelled sequentially in separate processes. This technique was developed for improving radar processing in determining the angular location of a target, and specifically for improving the monopulse technique by maintaining the accuracy of the target echo monopulse ratio in the presence of electronic jamming by adaptive suppression of the jamming signals before forming the monopulse sum and difference beams     

极化角对跟踪接收机相位影响分析

根据卫星通信中遇到的极化问题及其对移动地面站的影响,针对不同极化卫星间的差异,从电磁场理论中极化的定义和分类出发,给出不同极化电磁波电场信号表示方法,以某型移动卫通站天线馈源结构为例,介绍了不同状态下极化工作方式和线极化方式中线极化面调整的机理,然后结合单通道单脉冲跟踪接收机工作原理,对天线跟踪水平极化信标时线极化角与跟踪接收机相位间的关系进行了详细分析,为解决实际应用中遇到的跟踪接收机相位漂移问题提供了技术依据。     

Analysis and design optimization of monopulse receivers forsecondary surveillance radar

The sensitivity to calibration and component errors of the receiver configurations used for monopulse processing of secondary surveillance radar (SSR) replies is analyzed. The effects of video gain error in amplitude processors and large Gaussian perturbations in phase processors are discussed. Phase processors are shown to be robust to variations in antenna difference pattern null depth. A half-angle phase processor that yields the benefits of phase processing without the sensitivity to system errors associated with conventional implementations is described     

Multiple Gaussian Targets: The Track-on-Jam Problem

When a radar with amplitude comparison monopulse arithmetic encounters signals from multiple Gaussian sources it will "point" to the centroid of the incident radiation. The probability density function (pdf) of the monopulse ratio when N independent samples of difference and sum signals are processed in a maximum likelihood receiver is derived. For finite jam-to-noise ratio the estimate has a bias which is independent of N. The variance in the estimate does however depend upon N. Central moments of order less than or equal 2N - 2 exist and are given by a simple formula. Plots of the pdf and its bias and variance for various jam-to-noise ratios, locations of the centroid with respect to the boresight direction, and number of samples processed are presented in the accompanying figures.     

平视显示器的机上安装研究

由CRT中心点发出与平显光轴线平行并通过驾驶员眼点的光线是平显的零位瞄准线。平显的炮口十字线不宜称为零位瞄准线。平显的零位瞄准线被要求相对于飞机机身水平线下沉一定角度安装。平显的构造－安装方程表述了平显构造参量与安装参量间的关系。当平显在飞机上的安装要求确定后，平显的构造被方程所限定；当平显的构造确定后，平显在飞机上的安装被方程所限定。》     

Plane wave spectrum and boresight error of radome-enclosed antennas

Ａｉｒｂｏｒｎｅｒａｄｏｍｅｍａｙｉｎｔｒｏｄｕｃｅｓｉｇｎｉｆｉｃａｎｔｐｅｒｆｏｒｍａｎｃｅｄｅｇｒａｄａｔｉｏｎｔｏａｎｔｅｎｎａａｎｄｒａｄａｒｓｙｓｔｅｍｓ,ｅｖｅｎｉｆｄｅｓｉｇｎｅｄｅｌａｂｏｒａｔｅｌｙ．Ｓｉｎｃｅｒａｄｏｍｅｉｓａｄ...     

A Multiple-Beam Architecture for Sidelobe Cancellers

Using a computer simulation, we investigate the use of a small bundle of beams centered on the boresight axis to provide adaptive sidelobe cancelling. Advantages of this approach include the fact that the number of jammers suppressed is not limited to the number of adaptive loops provided. Also, the technique adapts well to the suppression of jammers over a wide frequency band.     

比相单脉冲雷达测角与角闪烁研究

比相单脉冲雷达采用和差通道接收信号比相的方法测角。一般认为,雷达事实上并不是在测量目标的方向,而是在测量目标的角闪烁方向。从特殊的两点目标出发,分析了单点目标和复杂目标下比相单脉冲雷达和差通道方式测角的原理与内在异同,探讨了比相单脉冲雷达测角与角闪烁的关系,提出有关雷达测角的新的观点。     

Novel array-feed distortion compensation techniques for reflectorantennas

Degradation of antenna performance by reflector surface distortion, which lowers gain and increases sidelobe levels, is addressed. Distortion compensation concepts based on the applications of properly matched array feeds are presented. Results of conceptual developments, numerical simulations, and measurement verifications are presented in support of this approach, with particular attention to the measurement technique. It is shown that the concept is most useful for overcoming the deterioration effects of slowly varying surface distortions, which would make the method very useful for future large space and ground antennas. It is further shown that for a typical, slowly varying thermal or gravitational surface distortion, a 19-element array feed can improve the reflector performance considerably     

The Measurement of Echo Direction in a Phased-Array Radar

For a planar-array antenna with a monopulse feed horn, this study describes a simple algorithm for the determination of the direction of target echoes. Antenna pattern measurements of the array indicate that the direction sines of a received wavefront can be independently obtained with one simple relation between a normalized difference channel output and a direction sine. This paper determines the accuracy of the algorithm.     

Performance Analysis of Monopulse Receivers for Secondary Surveillance Radar

In modern secondary surveillance radar (SSR) the monopulse technique is currently introduced for the measurement of the azimuth of the targets. The monopulse technique is based on a suitable processing of signals received by a multiple antenna. In SSR the signals are generated by a transponder on the aircraft as replies to interrogations from ground equipment, and consist of trains of pulses. The monopulse measurements can be carried out on the basis of a single pulse from each train, so that it provides a great number of azimuth estimates. Many monopulse measurement devices exist, corresponding to different processing techniques. From the point of view of accuracy and precision, their behaviors differ with respect to the sources of errors, both internal (noise and imperfect calibrations) and external (interference and propagation effects). The four main types of monopulse receivers are analyzed here with respect to the effects of the internal error sources on the resulting measurement accuracy. After an introductory discussion of the performances of the receivers, a detailed analysis is carried out on the basis of a general mathematical model. The results are given in an analytical form and in some comprehensive diagrams.     

On the Perfomance of Air Traffic Control Radar Beacon System

The sidelobe suppression and improved sidelobe suppression mode performance of terminal and enroute air traffic control radar beacon systems using the existing antenna and a typical improved antenna in the presence of perfectly dielectric flat ground are investigated theoretically. Necessary analytical expressions for various quantities characterizing the system performance have been derived. A general purpose computer program has been developed for the computation and tabulation of these quantities as functions of the elevation angle of the observation point and for different combinations of heights of the directional and omnidirectional antennas of the beacon. Although the discussions given here apply to some specific antenna configurations, the theoretical method developed has more general application in evaluating quantitatively the performance of the beacon system in a given situation.     

Thermal Noise in Amplitude Comparison Monopulse Systems

In this paper we consider the problem of estimation of angle of arrival in an Amplitude Comparison Monopulse antenna arrangement with the explicit inclusion of internally generated thermal, i.e., receiver, noise as an interference to the desired measurement. A pulsed type radar is assumed, and an ideal (i.e., point) radar target is postulated. This latter restriction is made so that consideration of the effects of target scintillation, glint, or other external random phenomena can be excluded from our treatment of the problem. In this context, a maximum likelihood analysis is made to determine the form of the estimate of angle of arrival, and the probability density function (pdf) of this quantity is computed. The form of the estimate is found to be a ratio of Gaussian variables quite like that used in conventional monopulse signal processing. The pdf obtained for the estimate is believed to be new, and it serves to emphasize the bias and indeterminate variance effects associated with this type of nonlinear signal processing. Some useful approximations to the pdf are discussed, and a unit of precision for the estimate is defined.     

A Modified Monopulse Technique for Radar Tracking with Low-Angle Multipath

In this paper a new monopluse technique for reducing radar multipath angle-tracking errors is proposed. The solution is achieved by using two monopulse antennas at different heights. The available signals allow one to control the antenna-height diversity so that the elevation angle control signal is not affected by reflected-wave components. The size of the antenna system may be reduced by properly using phase shifters. A possible configuration of such a system is considered and some practical data on the antenna-height diversity are discussed.