The situation in the geostationary ring

For more than 25 years, the practice of reorbiting of a geostationary satellite at the end of its mission in order to protect the geostationary orbit (GEO) environment has been recommended and performed by a number of operators. In recent years, an internationally recognised re-orbiting altitude has been defined by the Inter-Agency Space Debris Coordination Committee (IADC). Based on orbital data contained in the DISCOS database, the situation on the geostationary ring is analysed. In January 2004, from 1036 catalogued objects passing through the geostationary region, 340 are controlled within their allocated longitude slots, 395 are drifting above, below or through GEO, and 140 are in a libration orbit. In the periods 1997–2003, 103 spacecraft reached their end of life; 34 were reorbited in compliance with the IADC recommendation, 35 were reorbited below the minimum recommended altitude, and 34 were abandoned without any end-of-life disposal manoeuvre. Apart from these catalogued objects, the ESA 1-m telescope has observed many smaller debris (down to 10–15 cm) in this orbital region representing a collision risk for GEO spacecraft which is difficult to quantify.     

Precision orbit determination for TOPEX/Poseidon using TDRSS doppler tracking data

Precision orbit determination on the TOPEX/Poseidon (T/P) altimeter satellite is now being routinely achieved with sub-5cm radial and sub-15 cm total positioning accuracy using state-of-the-art modeling with precision tracking provided by a combination of: (a) global Satellite Laser Ranging (SLR) and Doppler Orbitography and Radiopositioning Integrated by Satellite (DORIS), or (b) the Global Positioning System (GPS) Constellation which provides pseudo-range and carrier phase observations. The geostationary Tracking and Data Relay Satellite System (TDRSS) satellites are providing the operational tracking and communication support for this mission. The TDRSS Doppler data are of high precision (0.3 mm/s nominal noise levels). Unlike other satellite missions supported operationally by TDRSS, T/P has high quality independent tracking which enables absolute orbit accuracy assessments. In addition, the T/P satellite provides extensive geometry for positioning a satellite at geostationary altitude, and thus the TDRSS-T/P data provides an excellent means for determining the TDRS orbits. Arc lengths of 7 and 10 days with varying degrees of T/P spacecraft attitude complexity are studied. Sub-meter T/P total positioning error is achieved when using the TDRSS range-rate data, with radial orbit errors of 10.6 cm and 15.5 cm RMS for the two arcs studied. Current limitations in the TDRSS precision orbit determination capability include mismodeling of numerous TDRSS satellite-specific dynamic and electronic effects, and in the inadequate treatment of the propagation delay and bending arising from the wet troposphere and ionosphere.     

East–West Station-Keeping maneuver strategy for COMS satellite using iterative process

The first Korean multi-mission geostationary satellite, Communication, Ocean, and Meteorological Satellite (COMS) will be launched in 2010. The missions of this satellite will be Ka-band communications, ocean color monitoring, and meteorological imaging. The satellite was designed with only one solar array on the south panel. This novel configuration will keep imaging instruments on the north side from heating up. Asymmetry of the spacecraft configuration requires twice-a-day thruster-based Wheel Off-Loading (WOL) operations to keep the satellite attitude for imaging and communication. Thruster firings during the WOL operations cause the satellite orbit to change two times a day. Weekly East–West Station-Keeping (EWSK) and North–South Station-Keeping (NSSK) maneuver operations are planned for the COMS satellite in order to maintain the satellite in ±0.05° box at 128.2°E longitude.     

基于机动力模型的GEO卫星恢复期间定轨

北斗卫星导航系统(BDS)中GEO卫星频繁的轨道机动对高精度、实时不间断的导 航服务需求提出了更高要求, 如何在短弧跟踪条件下提高GEO卫星轨道快速 恢复能力, 是提升导航系统服务精度的关键因素. 针对该问题, 本文提出了基 于机动力模型的动力学定轨方法, 尝试利用高精度的C波段转发式测距数据, 辅 以机动期间的遥测遥控信息建立机动力模型, 联合轨控前后的观测数据进行动 力学长弧定轨. 利用BDS中GEO卫星实测数据进行了定轨试验与分析, 结果表明, 恢复期间需要采用解算机动推力的定轨方法, 联合机动前、机动期间和机 动后4h数据定轨的轨道位置精度在20m量级, 径向精度优于2.5m. 该方 法克服了短弧跟踪条件下动力学法定轨和单点定位中的诸多问题, 提供了解决 GEO卫星机动后轨道快速恢复问题的技术方法.      

地球同步通信广播卫星的两种姿态控制方式

本文讨论了目前存在的和正在发展的地球同步卫星的两种姿态控制问题:星地大回路姿态控制;星上自主姿态控制。文中叙述了我国已经研制成功的STW—1,STW—2的姿态控制,同时指出了我国今后研制双自旋卫星姿态控制系统的方向。由于讨论了三轴稳定卫星的姿态控制,因而对我国正在研制的三轴稳定卫星的姿态控制系统在设计方法上作了探讨。     

Model predictive control for close-proximity maneuvering of spacecraft with adaptive convexification of collision avoidance constraints

This study investigated model predictive control (MPC) for close-proximity maneuvering of spacecraft. It is essential for a designed MPC to effectively handle collision avoidance between the servicer spacecraft and the client spacecraft, especially while the client is rotating. The rotating motion of the client leads to dynamic changes in the collision avoidance constraints, which increases the difficulty of optimizing the control input in the MPC framework. Therefore, this study presents a method to improve the performance and computational efficiency of MPC for rendezvous and docking with a nonrotating or rotating client. An ellipsoid is adopted to model the client’s keep-out zone (KOZ). Given the spherical KOZ of the servicer, an expanded ellipsoid is introduced to describe the KOZ for the center of mass of the servicer and modeled as a nonlinear constraint. The linearization method for reference points located at the expanded ellipsoid is adopted to convexify the nonlinear constraints. The reference points are adaptively determined according to the positions of the servicer, client, and expanded ellipsoidal KOZ. The resulting hyperplanes are then used to describe the collision avoidance constraints. By utilizing the aforementioned strategies, combined with the calculated reference points, an adaptive convex programming algorithm suitable for real-time implementation of MPC is derived. The performance of the proposed method is demonstrated through numerical simulations.     

Fengyun Satellites: Achievements and Future

Chinese meteorological satellite, Fengyun (FY) Satellite, has a polar-orbiting series and a geostationary series. Up to now, 5 polar-orbiting (FY-1A/B/C/D and FY-3A) and 5 geostationary (FY-2A/B/C/D/E) satellites were launched. FY data has been being intensively applied not only to meteorological monitoring and prediction but also to many other fields regarding ecology, environment, disaster, space weather and so and. The FY data sharing system, FengyunCast, is now one of the three components of global meteorological satellite information dissemination system, GEONETCast. The first satellite of the new generation polar-orbiting series, FY-3A, was launched on 27 May, 2008, demonstrating the FY polar-orbiting satellite and its application completed a great leap to realize three-dimensional observations and quantitative application. The first of the next generation geostationary series (FY-4) is planned to launch in 2014.      

Broglio Drag Balance for neutral thermosphere density measurement on UNICubeSAT

The nanosatellite UNICubeSAT is described, carrying a Broglio Drag Balance Instrument for neutral thermosphere density in situ measurements. The aim of the mission is to contribute to the development of accurate thermosphere models, achieving in situ, real time measurements of atmosphere density, that could be exploited for global atmosphere model validation and accurate short term (1–3 days) real time space weather forecasts. The satellite is inexpensive and swarms could be easily launched operating as a distributed sensor network to get simultaneous in situ local (not orbit averaged) measurements in multiple positions and orbit heights. The nanosatellite is based on the Cubesat standard architecture, weighing about 1 kg for 1-L volume. Atmospheric drag force is measured by the displacement of light plates exposed to the incoming particle flux seen by the spacecraft, applying the original three dimensional Broglio Drag Balance concept to a single nanosatellite axis. The instrument concept and its relation to the satellite bus is depicted, showing that many long term potential measurement error sources and biases can be removed in data processing if the spacecraft is spin stabilized. The expected accuracy in density measurements is 20%. The instrument cost is a fraction of that of accurate accelerometers. The onboard systems are based on commercial off the shelf components, in accordance with the short lifetime typical of aeronomy satellites.     

基于GNSS的高轨卫星定位技术研究

利用全球卫星导航系统(GNSS)进行导航定位具有全球、全天候、实时和高精度的优点,应用于高地球轨道(HEO)卫星的定位,能够提供精确的轨道和姿态确定,并且可以克服目前主要利用地面测控系统对HEO卫星进行定位的设备复杂、投资高等缺点,使得自主导航成为可能.本文对利用GNSS的高轨卫星定位相关技术进行了研究,分析了单一GNSS系统和多个GNSS组合系统的卫星可见性、动态性和几何精度因子(GDOP).通过仿真分析表明,利用组合GNSS系统并通过提高GNSS接收机灵敏度的方法,可以解决GNSS进行HEO卫星定位的相关问题,并能保证HEO卫星定位精度的要求.      

Degradation of thermal control materials under a simulated radiative space environment

A spacecraft with a passive thermal control system utilizes various thermal control materials to maintain temperatures within safe operating limits. Materials used for spacecraft applications are exposed to harsh space environments such as ultraviolet (UV) and particle (electron, proton) irradiation and atomic oxygen (AO), undergo physical damage and thermal degradation, which must be considered for spacecraft thermal design optimization and cost effectiveness. This paper describes the effect of synergistic radiation on some of the important thermal control materials to verify the assumptions of beginning-of-life (BOL) and end-of-life (EOL) properties. Studies on the degradation in the optical properties (solar absorptance and infrared emittance) of some important thermal control materials exposed to simulated radiative geostationary space environment are discussed. The current studies are purely related to the influence of radiation on the degradation of the materials; other environmental aspects (e.g., thermal cycling) are not discussed. The thermal control materials investigated herein include different kind of second-surface mirrors, white anodizing, white paints, black paints, multilayer insulation materials, varnish coated aluminized polyimide, germanium coated polyimide, polyether ether ketone (PEEK) and poly tetra fluoro ethylene (PTFE). For this purpose, a test in the constant vacuum was performed reproducing a three year radiative space environment exposure, including ultraviolet and charged particle effects on North/South panels of a geostationary three-axis stabilized spacecraft. Reflectance spectra were measured in situ in the solar range (250–2500 nm) and the corresponding solar absorptance values were calculated. The test methodology and the degradations of the materials are discussed. The most important degradations among the low solar absorptance materials were found in the white paints whereas the rigid optical solar reflectors remained quite stable. Among the high solar absorptance elements, as such the change in the solar absorptance was very low, in particular the germanium coated polyimide was found highly stable.     

星地无线电双向法时间比对计算模型及其误差评估

卫星导航定位系统测距的基础是测时,而定轨和定位的前提是各观测量的时间同步。因此,时间同步技术是卫星导航定位系统建设的关键技术基础之一。根据星地无线电双向法时间同步技术的基本原理,详细推导了其在地心惯性系中的基本计算模型,并以静止地球同步轨道卫星为例,分析了该计算模型中的距离改正项时延对星地间相对钟差的影响量级。     

U.S. operational space program for climate observations

Satellites provide two important characteristics to earth climate studies not available from other, conventional sources: (1) full global coverage, and (2) consistency within the data set. This latter arises from the fact that the satellite data are usually derived from one instrument (or at least from a small number) whereas other sources involve large numbers of separate instruments and hence exhibit a substantial standard deviation. Satellite data, of course, are more subject to bias and must therefore be carefully validated, usually via ground truth.The ISCCP and ISLSCP are examples of the increasing reliance on satellite data for climate studies. In addition to the multispectral images, quantitative products of importance are: (1) atmospheric temperature structure, (2) snow cover, (3) precipitation, (4) vegetation index, (5) maximum/minimum temperature, (6) insolation, and (7) earth radiation balance. The U.S. civil space program is presently committed to its current geostationary (GOES) and polar (NOAA) programs through this decade and to continue both programs into the next decade with spacecraft carrying improved and augmented instrumentation. GOES VISSR Atmospheric Sounder (VAS) data, presently in research status and available only for special observation periods, will become available operationally in 1987 from the current spacecraft series. GOES-Next will provide additional spectral channels, simultaneous imaging, atmospheric soundings, and possibly increased resolution starting in 1990. The NOAA follow-on spacecraft, in the same time frame, is expected to provide additional spectral channels, improved passive microwave radiometry, and possibly increased spatial resolution. The Landsat program is expected to be continued by a commercial operator following the useful life of Landsat-5. All three follow-on programs are presently at various stages of definition and procurement. Final definition may not be completed until late in 1984. However, their status as of the time of this presentation will be reviewed in detail.     

在轨地球同步卫星自主工程测控研究

地球同步卫星在轨工程测控任务通常由地面测控系统完成. 随着技术水平的发展, 如果在轨地球同步卫星能够实现自主工程测控, 将大大减轻地面测控系统负担, 提高卫星独自生存能力, 降低系统运行成本, 并将成为卫星测控技术新的发展方向. 本文提出卫星自主在轨测控方案, 研究了当前地球同步卫星在轨工程测控的主要项目及实现算法. 对其进行的可行性分析表明, 尽管受到轨道测量能力的制约, 在轨地球同步卫星仍可实现完全或地面有限参与情况下的自主工程测控. 在此基础上, 设计了一种地球同步在轨卫星完全自主工程测控的原理方案, 通过分析其技术难点及存在的风险, 提出应对措施. 研究结果表明, 基于目前卫星制造水平和成熟的在轨测控技术, 实现在轨地球同步卫星自主工程测控技术可行, 其是解决卫星数量急剧增加与地面测控能力有限这一突出矛盾的有效途径.      

A review of geostationary satellite alternatives for retrieving data from long duration balloon flights

Low speed data from high altitude scientific balloon flights can be retrieved by geostationary satellites through existing data collection platform systems. Higher speed data of the order of 1 kbit/s create a more difficult problem, particularly if a response is to be made to the balloon payload in near real time. Different geostationary satellite methods to achieve these more demanding requirements are reviewed, and the more interesting cases identified for possible future experiments.     

Micro-meteoroids and space debris impact risk assessment for the ConeXpress satellite using ESABASE2/Debris

Micro-meteoroid and space debris impact risk assessments are performed to investigate the risk from hypervelocity impacts to sensitive spacecraft sub-systems. For these analyses, ESA’s impact risk assessment tool ESABASE2/Debris is used. This software tool combines micro-particle environment models, damage equations for different shielding designs and satellite geometry models to perform a detailed 3D micro-particle impact risk assessment. This paper concentrates on the impact risk for exposed pressurized tanks. Pressure vessels are especially susceptible to hypervelocity impacts when no protection is available from the satellite itself. Even small particles in the mm size range can lead to a fatal burst or rupture of a tank when impacting with a typical collision velocity of 10–20 km/s. For any space mission it has to be assured that the impact risk is properly considered and kept within acceptable limits. The ConeXpress satellite mission is analysed as example. ConeXpress is a planned service spacecraft, intended to extend the lifetime of telecommunication spacecraft in the geostationary orbit. The unprotected tanks of ConeXpress are identified as having a high failure risk from hypervelocity impacts, mainly caused by micro-meteoroids. Options are studied to enhance the impact protection. It is demonstrated that even a thin additional protective layer spaced several cm from the tank would act as part of a double wall (Whipple) shield and greatly reduce the impact risk. In case of ConeXpress with 12 years mission duration the risk of impact related failure of a tank can be reduced from almost 39% for an unprotected tank facing in flight direction to below 0.1% for a tank protected by a properly designed Whipple shield.     

Protecting Earth-orbiting spacecraft against micro-meteoroid/orbital debris impact damage using composite structural systems and materials: An overview

Spacecraft that are launched to operate in Earth orbit are susceptible to impacts by meteoroids and pieces of orbital debris (MMOD). The effect of a MMOD particle impact on a spacecraft depends on where the impact occurs, the size, composition, and speed of the impacting object, the function of the impacted system. In order to perform a risk analysis for a particular spacecraft under a specific mission profile, it is important to know whether or not the impacting particle (or its remnants) will exit the rear of an impacted spacecraft wall. A variety of different ballistic limit equations (BLEs) have been developed for many different types of structural wall configurations. BLEs can be used to optimize the design of spacecraft wall parameters so that the resulting configuration is able to withstand the anticipated variety of on-orbit high-speed impact scenarios. While the level of effort exerted in studying the response of metallic multi-wall systems to high speed particle impact is quite substantial, the extent of the effort to study composite material and composite structural systems under similar impact conditions has been much more limited. This paper presents an overview of the activities performed to assess the resiliency of composite structures and materials under high speed projectile impact. The activities reviewed will be those that have been aimed at increasing the level of protection afforded to spacecraft operating in the MMOD environment, and more specifically, on those activities performed to mitigate the mechanical and structural effects of an MMOD impact.     

对GEO卫星在轨加注的服务航天器组网方案优化

对地球静止轨道（GeosynchronousOrbit,GEO）卫星在轨加注燃料以延长其工作寿命蕴含着巨大的经济价值,而执行加注任务的服务航天器在轨组网方案直接影响在轨加注任务全局。文章以GEO卫星为在轨服务对象,开展了提供加注服务的航天器最优组网方案研究。提出了1个燃料存储站加N个加注飞行器的服务航天器体系架构,燃料存储站承载大量燃料,长期在轨稳定运行;加注飞行器机动运行,执行对GEO卫星加注任务,当加注飞行器燃料不足时,返回燃料存储站获取燃料。燃料存储站的质量、运行轨道,加注飞行器的数目、质量与运行轨道、对GEO卫星提供加注的加注飞行器任务分配等是组网方案研究的重点,建立了以对GEO卫星加注任务的响应时间短、服务系统成本低为互斥评价准则的服务航天器组网方案的多目标优化设计数学模型,分析了组网方案优化问题的求解方法及流程,采用多目标粒子群算法对服务航天器组网方案进行了优化设计,通过分析一组非支配优化设计结果对于2个互斥评价准则的平衡性,提出了1个燃料存储站加4～6个加注飞行器的服务航天器最优组网方案。     

An alternative approach to solar system exploration providing safety of human mission to Mars.

For systematic human Mars exploration, meeting crew safety requirements, it seems perspective to assemble into a spacecraft: an electrical rocket, a well-shielded long-term life support system, and a manipulator-robots operating in combined "presence effect" and "master-slave" mode. The electrical spacecraft would carry humans to the orbit of Mars, providing short distance (and low signal time delay) between operator and robot-manipulators, which are landed on the surface of the planet. Long-term hybrid biological and physical/chemical LSS could provide environment supporting human health and well being. Robot-manipulators operating in "presence effect" and "master-slave" mode exclude necessity of human landing on Martian surface decreasing the level of risk for crew. Since crewmen would not have direct contact with the Martian environment then the problem of mutual biological protection is essentially reduced. Lightweight robot-manipulators, without heavy life support systems and without the necessity of returning to the mother vessel, could be sent as scouts to different places on the planet surface, scanning the most interesting for exobiological research site. Some approximate estimations of electric spacecraft, long-term hybrid LSS, radiation protection and mission parameters are conducted and discussed.     

Practical method to identify orbital anomaly as spacecraft breakup in the geostationary region

Identifying spacecraft breakup events is an essential issue for better understanding of the current orbital debris environment. This paper proposes an observation planning approach to identify an orbital anomaly, which appears as a significant discontinuity in archived orbital history, as a spacecraft breakup. The proposed approach is applicable to orbital anomalies in the geostationary region. The proposed approach selects a spacecraft that experienced an orbital anomaly, and then predicts trajectories of possible fragments of the spacecraft at an observation epoch. This paper theoretically demonstrates that observation planning for the possible fragments can be conducted. To do this, long-term behaviors of the possible fragments are evaluated. It is concluded that intersections of their trajectories will converge into several corresponding regions in the celestial sphere even if the breakup epoch is not specified and it has uncertainty of the order of several weeks.