联合北斗导航与星间链路的大椭圆卫星定轨方法

传统的地面测控和GNSS均无法实现HEO卫星全弧段的跟踪观测.在分析北斗导航信号及其星间链路信号对典型HEO的观测几何及覆盖特性的基础上,利用北斗导航及其星间链路对HEO测控支持形成互补的特点,提出了一种卫星导航与星间链路相结合的自主导航方法.对HEO定轨进行分段划分并基于EKF设计了卫星导航与星间链路数据融合定轨的自主导航算法.分析结果表明,本文提出的方法能够从全弧段上改善HEO的观测几何,定轨精度比仅使用卫星导航提高了2个数量级,并且仅需较少的星间链路资源.      

单星导航HEO卫星初轨确定算法

HEO(Highly Elliptical Orbit)轨道卫星利用星载GPS(Global Positioning System)进行自主定轨面临的主要难题之一就是解决在单颗导航卫星条件下的初轨确定问题.从理论上分析了利用单颗导航卫星的观测量确定HEO卫星轨道初值的所需满足的条件,指出了利用F.G级数法求解初值存在的问题,提出了一种基于轨道根数约束的迭代批处理算法,该算法无需复杂的数学运算,避免了F.G级数法用短弧资料定初轨时系数矩阵秩亏的影响.仿真结果表明,当先验轨道根数误差在允许范围内取值时,在考虑轨道射入误差的情况下,初值的位置偏差在10⁴ m量级,速度偏差在10⁰ m/s量级,能够根据单颗导航卫星的短弧观测值可靠地完成轨道初值的确定.     

星载GNSS确定GEO卫星轨道的积分滤波方法

采用星载全球导航卫星系统（GNSS）确定地球静止轨道（GEO）,以解决目前应用星载全球定位系统(GPS)时导航卫星可见性差的问题。以风云卫星为例,分析了未来的GNSS相对于GEO卫星的可见性,针对GEO轨道上导航接收机采样间隔较长的问题,综合轨道积分和卡尔曼滤波方法的优点,提出了确定GEO卫星轨道的积分滤波方法。并利用STK软件仿真产生所需数据,用MATLAB对提出的算法编程并进行仿真验证,结果表明,提出的方法性能优越,定轨精度较高。     

基于ORBCOMM卫星机会信号的定位技术

为摆脱对全球导航卫星系统（GNSS）的依赖，克服其有意或无意干扰情况下无法工作等问题，可采用机会信号（SOP）实现定位，低轨卫星机会信号具备信号功率高、覆盖性广及无需增建基础设施等优点。提出了利用轨道通信卫星（ORBCOMM）系统实现天基机会信号定位。通过对ORBCOMM卫星机会信号的通信体制进行深入研究，实现了利用ORBCOMM卫星机会信号获取多普勒测量信息，建立了瞬时多普勒定位及其几何精度因子的数学模型，并采用卫星TLE数据结合轨道预测模型获得的卫星轨道信息实现ORBCOMM卫星机会信号定位。实测结果表明:利用ORBCOMM卫星机会信号可实现精度优于140 m的定位。研究成果对基于天基机会信号定位技术的理论研究及应用具有重要意义。      

基于星间距离测量的高精度自主导航

研究利用地球卫星和月球卫星之间的测距信息进行自主导航的方法.基于三体摄动轨道动力学方程和星间测距信息,可以同时确定参与导航的地球卫星和月球卫星的绝对位置;但是在初始位置误差较大的情况下,导航系统的定位性能会受到影响.为了解决这一问题,提出基于"星间测距+紫外导航敏感器"的组合导航方法.采用该导航方法,能够在初始位置误差和紫外导航敏感器测量误差较大的情况下实现高精度自主导航.基于Cramer-Rao下界(CRLB)分析了组合导航系统的性能,并通过数学仿真验证了该导航方法的有效性.     

基于高轨航天器的GNSS接收机技术

全球导航卫星系统(Global Navigation Satellite System,GNSS)应用于高轨航天器时,因轨道高于导航卫星,可见星数量急剧减少,空间信号功率微弱,信号的快速捕获和跟踪十分困难。文章对高轨地球同步轨道(Geosynchronous Earth Orbit,GEO)接收技术进行了研究。以中国实践十七号卫星为研究对象,采用官方正式发布的发射天线方向图对GEO下GNSS信号特征及可用性开展研究分析,并针对高轨道航天器GNSS信号微弱的特点,采用长时间积分处理的梳状滤波方法、差分相干累加比特同步算法和基于动力学模型补偿的扩展卡尔曼滤波自主定轨算法设计GNSS接收机,并在半物理仿真平台进行了测试验证。试验结果表明:GNSS接收机捕获灵敏度优于-173dBW,跟踪灵敏度优于-175dBW,定轨位置精度优于50m,速度精度优于0.01m/s。     

载波相位/捷联惯导组合对高轨飞行器的导航

高轨飞行器可用卫星数目较少,信号空间链路损耗大,使用伪距进行测量的精度较低.提出基于GNSS(Global Navigation Satellite System)卫星载波相位与捷联惯导紧组合方法对高轨机动飞行器进行自主导航.该方法将连续跟踪的卫星初次可用时的整周模糊度的浮点解作为状态变量,通过平方根UKF建立了组合导航非线性滤波模型,提出了基于整周浮点解交集的滤波器故障检测方法.研究表明,提出的组合导航方法充分利用了载波相位高测量精度和系统性误差缓变的特点,提高了系统的可靠性和精度.     

欧洲继续推动静轨道卫星导航系统的发展

欧空局 ( ESA)、欧洲委员会 ( EC)以及欧洲航行安全局 ( Eurocontrol)三方 ,在“全球导航定位卫星系统” ( GNSS)的开发协调上取得了具体的进展。GNSS计划分 2个阶段实施。第 1个阶段是建造 GNSS- 1 ,即第 1代卫星导航系统 ,它依赖于美国 GPS和俄罗斯GLONASS星座。第 2个阶段是建造 GNSS- 2 ,即第 2代卫星导航系统 ,它能够为民用用户提供更先进的导航及定位服务。“伽利略” ( Galileo)系统将作为 GNSS- 2的组成部分。在 GNSS- 1阶段 ,欧洲正在建立“欧洲静止轨道导航重叠系统”( EGNOS) ,其主要目的是提高 GPS和 GLO…     

基于GEO／HEO混合星座的区域卫星定位系统性能分析

星座方案选择对卫星定位系统的性能具有很大影响。本文结合GNSS－2星座方案中的阿基米德计划，设计了针对我国区域的HEO／GEO混合星座，首先从可见性角度对GEO卫星定点参数和HEO卫星轨道参数进行了优选，之后，以GDOP和PDOP因子为衡量标准，在选定覆盖区域内，对混合星座的定位性能进行了分析，仿真结果表明，在覆盖区域内，该星座能够达到与GPS相当的定位精度。     

Iridium/ORBCOMM机会信号融合定位技术

在全球导航卫星系统(GNSS)不可用情况下，低地球轨道(LEO)卫星机会信号(SOP)定位技术是一种有效的导航定位解决方案。单LEO星座机会信号定位技术面临星座构型不足或可见卫星偏少等问题，多LEO星座机会信号融合定位技术可有效解决该问题。通过分析瞬时多普勒定位原理，建立了Iridium/ORBCOMM机会信号融合定位模型，引入基于Helmert方差估计的加权最小二乘算法进一步提高定位精度。实测数据表明:基于Helmert方差估计的Iridium/ORBCOMM机会信号融合定位精度优于70 m，验证了多LEO星座机会信号融合定位的可行性和有效性。      

Design and performances of laser retro-reflector arrays for Beidou navigation satellites and SLR observations

Beidou is the regional satellite navigation system in China, consisting of three kinds of orbiting satellites, MEO, GEO and IGSO, with the orbital altitudes of 21500–36000 km. For improving the accuracy of satellites orbit determination, calibrating microwave measuring techniques and providing better navigation service, all Beidou satellites are equipped with laser retro-reflector arrays (LRAs) to implement high precision laser ranging. The paper presents the design of LRAs for Beidou navigation satellites and the method of inclined installation of LRAs for GEO satellites to increase the effective reflective areas for the regional ground stations. By using the SLR system, the observations for Beidou satellites demonstrated a precision of centimeters. The performances of these LRAs on Beidou satellites are very excellent.     

Orbit determination of BeiDou navigation satellite system maneuvered satellites based on instantaneous velocity pulses parameters

The BeiDou navigation satellite system (BDS) comprises geostationary earth orbit (GEO) satellites as well as inclined geosynchronous orbit (IGSO) and medium earth orbit (MEO) satellites. Owing to their special orbital characteristics, GEO satellites require frequent orbital maneuvers to ensure that they operate in a specific orbital window. The availability of the entire system is affected during the maneuver period because service cannot be provided before the ephemeris is restored. In this study, based on the conventional dynamic orbit determination method for navigation satellites, multiple sets of instantaneous velocity pulses parameters which belong to one of pseudo-stochastic parameters were used to simulate the orbital maneuver process in the orbital maneuver arc and establish the observed and predicted orbits of the maneuvered and non-maneuvered satellites of BeiDou regional navigation satellite system (BDS-2) and BeiDou global navigation satellite system (BDS-3). Finally, the single point positioning (SPP) technology was used to verify the accuracy of the observed and predicted orbits. The orbit determination accuracy of maneuvered satellites can be greatly improved by using the orbit determination method proposed in this paper. The overlapping orbit determination accuracy of maneuvered GEO satellites of BDS-2 and BDS-3 can improve 2–3 orders of magnitude. Among them, the radial orbit determination accuracy of each maneuvered satellite is basically better than 1 m. simultaneously, the combined orbit determination of the maneuvered and non-maneuvered satellites does not have a great impact on the orbit determination accuracy of the non-maneuvered satellites. Compared with the multi GNSS products (indicated by GBM) from the German Research Centre for Geosciences (GFZ), the impact of adding the maneuvered satellites on the orbit determination accuracy of BDS-2 satellites is less than 9 %. Furthermore, the orbital recovery time and the service availability period are significantly improved. When the node of the predicted orbit is traversed approximately 3 h after the maneuver, the accuracy of the predicted orbit of the maneuvered satellite can reach that of the observed orbit. The SPP results for the BDS reached a normal level when the node of the predicted orbit was 2 h after the maneuver.     

Instantaneous BeiDou–GPS attitude determination: A performance analysis

The advent of modernized and new global navigation satellite systems (GNSS) has enhanced the availability of satellite based positioning, navigation, and timing (PNT) solutions. Specifically, it increases redundancy and yields operational back-up or independence in case of failure or unavailability of one system. Among existing GNSS, the Chinese BeiDou system (BDS) is being developed and will consist of geostationary (GEO) satellites, inclined geosynchronous orbit (IGSO) satellites, and medium-Earth-orbit (MEO) satellites. In this contribution, a BeiDou–GPS robustness analysis is carried out for instantaneous, unaided attitude determination.     

基于机动力模型的GEO卫星恢复期间定轨

北斗卫星导航系统(BDS)中GEO卫星频繁的轨道机动对高精度、实时不间断的导 航服务需求提出了更高要求, 如何在短弧跟踪条件下提高GEO卫星轨道快速 恢复能力, 是提升导航系统服务精度的关键因素. 针对该问题, 本文提出了基 于机动力模型的动力学定轨方法, 尝试利用高精度的C波段转发式测距数据, 辅 以机动期间的遥测遥控信息建立机动力模型, 联合轨控前后的观测数据进行动 力学长弧定轨. 利用BDS中GEO卫星实测数据进行了定轨试验与分析, 结果表明, 恢复期间需要采用解算机动推力的定轨方法, 联合机动前、机动期间和机 动后4h数据定轨的轨道位置精度在20m量级, 径向精度优于2.5m. 该方 法克服了短弧跟踪条件下动力学法定轨和单点定位中的诸多问题, 提供了解决 GEO卫星机动后轨道快速恢复问题的技术方法.      

NeQuick G model based scale factor determination for using SBAS ionosphere corrections at low earth orbit

A space-based augmentation system (SBAS) provides real-time correction data for global navigation satellite system (GNSS) users near ground. In order to use the SBAS ionosphere correction for low Earth orbit (LEO) satellites, the correction should be scaled down for the LEO altitude. This scale factor varies with ionosphere distribution and it is hard to determine the value at LEO in real time. We propose a real-time scale factor determination method by using Galileo GNSS’s NeQuick G model. A LEO satellite GPS data and SBAS data received on ground were used to evaluate the performance of the NeQuick G derived variable scale factor. The NeQuick G derived scale factor shows a significant accuracy improvement over NeQuick G model or pre-determined constant scale factor. It improves a vertical positioning accuracy of the LEO satellite. The error mean reductions of the vertical positioning over NeQuick G and the constant scale factor are 31.5% and 11.7%, respectively.     

Analysis on navigation accuracy of high orbit spacecraft based on BDS GEO and IGSO satellites

To make up for the insufficiency of earth-based TT&C systems, the use of GNSS technology for high-orbit spacecraft navigation and orbit determination has become a new technology. It is of great value to applying Geosynchronous Earth Orbit (GEO) and Inclined GeoStationary Orbit (IGSO) navigation satellites for supporting the navigation of high-orbit spacecraft since there are three different types of navigation satellites in BeiDou Navigation Satellite System (BDS): Medium Earth Orbit (MEO), GEO and IGSO. This paper conducts simulation experiments based on Two-Line Orbital Element (TLE) data to analyze and demonstrate the role of these satellites in the navigation of high-orbit spacecraft. Firstly, the spacecraft in GEO was used as the target satellite to conduct navigation experiments. Experiments show that for the spacecraft on the GEO orbit, after adding GEO and IGSO respectively on the basis of receiving MEO navigation satellite signals, the accuracies were improved by 7.22 % and 6.06 % respectively. When adding both GEO and IGSO navigation satellites at the same time, the accuracy can reach 16 m. In the second place, navigation and positioning experiments were carried out on three high elliptical orbit (HEO) satellites with different semimajor axis (32037.2 km, 42385.9 km, 67509.6 km). The experiments show that the number of visible satellites has been improved significantly after adding GEO and IGSO navigation satellites at the same time. The visible satellites in these three orbits were improved by 32.84 %, 41.12 % and 37.68 %, respectively compared with only observing MEO satellites.The RMS values of the navigation positioning errors of these three orbits are 25.59 m, 87.58 m and 712.48 m, respectively.     

LEO enhanced Global Navigation Satellite System (LeGNSS) for real-time precise positioning services

Global Navigation Satellite System (GNSS) has been widely used in many geosciences areas with its Positioning, Navigation and Timing (PNT) service. However, GNSS still has its own bottleneck, such as the long initialization period of Precise Point Positioning (PPP) without dense reference network. Recently, the concept of PNTRC (Positioning, Navigation, Timing, Remote sensing and Communication) has been put forward, where Low Earth Orbit (LEO) satellite constellations are recruited to fulfill diverse missions. In navigation aspect, a number of selected LEO satellites can be equipped with a transmitter to transmit similar navigation signals to ground users, so that they can serve as GNSS satellites but with much faster geometric change to enhance GNSS capability, which is named as LEO constellation enhanced GNSS (LeGNSS). As a result, the initialization time of PPP is expected to be shortened to the level of a few minutes or even seconds depending on the number of the LEO satellites involved. In this article, we simulate all the relevant data from June 8th to 14th, 2014 and investigate the feasibility of LeGNSS with the concentration on the key issues in the whole data processing for providing real-time PPP service based on a system configuration with fourteen satellites of BeiDou Navigation Satellite System (BDS), twenty-four satellites of the Global Positioning System (GPS), and sixty-six satellites of the Iridium satellite constellations. At the server-end, Precise Orbit Determination (POD) and Precise Clock Estimation (PCE) with various operational modes are investigated using simulated observations. It is found out that GNSS POD with partial LEO satellites is the most practical mode of LeGNSS operation. At the user-end, the Geometry Dilution Of Precision (GDOP) and Signal-In-Space Ranging Error (SISRE) are calculated and assessed for different positioning schemes in order to demonstrate the performance of LeGNSS. Centimeter level SISRE can be achieved for LeGNSS.     

严格回归轨道的管道导航方法研究

分析了作为参考轨道的严格回归轨道与卫星在轨运行状态的相对运动关系,提出近地遥感卫星的管道导航方法。由于参考轨道的设计只考虑高精度的地球非球形摄动,与在轨卫星的动力学环境存在差别,这导致两者之间存在切航向漂移。基于高精度的轨道动力学模型和位置确定方法,设计了卫星与参考轨道采样点的沿航向对齐算法,从而获取了卫星相对参考轨道采样点的相位时间偏差和卫星在参考轨道编队坐标系切航向平面内的相对运动轨迹,进而引入椭圆的“最小二乘适配法”获取相对运动轨迹的特征量。所研究的管道导航方法可应用于基于GNSS测量数据的卫星自主轨迹保持。     

Guidepost-based autonomous orbit determination method for GEO satellite

Guidepost-based navigation system is a novel autonomous orbit determination method for the GEO satellite. The system is achieved by using the camera imaging function to obtain the guidepost images and the GNSS signal receiver to obtain the pseudoranges between the GEO and the navigation satellites. Due to the high altitude of GEO satellite and the time-varying sunlight condition in the space environment, it may be difficult to obtain object image points and the distance measurements of GNSS because of the weak visibility of the guideposts. To deal with the problem, a novel integrated orbit determination system is presented. The Earth landmarks, the in-orbit spacecraft and GNSS navigation satellites whose line-of-sights and the distance can be easily obtained are used at the same time as information for the GEO satellite navigation based on the observability conditions analysis. The observability of the GEO satellite navigation system is analyzed through the physical observability, the mathematical observability and the engineering observability through the observing geometry, the rank of observability matrix and the Cramer-Rao lower bound (CRLB) respectively. Besides, the maximum correntropy unscented Kalman filter (MCUKF) algorithm is applied to improve the estimation stability of the system in the presence of non-Gaussian noises. The simulation indicates the feasibility of the proposed scheme.