排序方式: 共有20条查询结果,搜索用时 46 毫秒
1.
随着大功率发光二极管(LED)在照明领域的普及与广泛应用,可靠性逐渐成为研究的重点。大功率LED封装器件中金引线疲劳断裂失效一直是制约其可靠性的重要因素。通过针对大功率LED封装器件中的金引线力学仿真与功率循环试验相结合的方法,首先确定循环电载荷条件下该型LED的主要失效原因为金引线疲劳断裂,其次提出基于电流加速模型的加速因子提取方法和基于应变幅值的Coffin-Manson解析寿命预测方法,最终完成对LED金引线疲劳断裂寿命的预测和试验验证。研究结果表明:所提方法具有较高的寿命预测精度,可以满足大功率LED封装器件可靠性快速、准确评估的要求。 相似文献
2.
3.
介绍LED彩屏控制系统中目前最常用的DMX512数字信号的格式、传输方式,及其在灯光控制系统中的应用,针对该系统在实际应用中所要达到的效果作相应的改进,使该系统具有稳定、连续、渐变的图像效果。 相似文献
4.
Iliana Ilieva Tania Ivanova Yordan Naydenov Ivan Dandolov Detelin Stefanov 《Advances in Space Research (includes Cospar's Information Bulletin, Space Research Today)》2010
Light is necessary for photosynthesis and shoot orientation in the space plant growth facilities. Light modules (LM) must provide sufficient photosynthetic photon flux for optimal efficiency of photosynthetic processes and also meet the constraints for power, volume and mass. A new LM for Svet space greenhouse using Cree® XLamp® 7090 XR light-emitting diodes (LEDs) was developed. Monochromic LEDs emitting in the red, green, and blue regions of the spectrum were used. The LED-LM contains 36 LED spots – 30 LED spots with one red, green and blue LED and 6 LED spots with three red LEDs. Digital Multiplex Control Unit controls the LED spots and can set 231 levels of light intensity thus achieving Photosynthetic Photon Flux Density (PPFD) in the range 0–400 μmol m−2 s−1 and different percentages of the red, green and blue light, depending on the experimental objectives. Two one-month experiments with plants – lettuce and radicchio were carried out at 400 μmol m−2 s−1 PPFD (high light – HL) and 220 μmol m−2 s−1 PPFD (low light – LL) and 70% red, 20% green and 10% blue light composition. To evaluate the efficiency of photosynthesis, in vivo modulated chlorophyll fluorescence was measured by Pulse Amplitude Modulation (PAM) fluorometer on leaf discs and the following parameters: effective quantum yield of Photosystem II (ΦPSII) and non-photochemical quenching (NPQ) were calculated. Both lettuce and radicchio plants grown at LL express higher photochemical activity of Photosystem II (PSII) than HL grown plants, evaluated by ΦPSII. Accelerated rise in NPQ in both LL grown plants was observed, while steady state NPQ values were higher in LL grown lettuce plants and did not differ in LL and HL grown radicchio plants. The extent of photoinhibition process in both plants was evaluated by changes in malonedialdehyde (MDA) concentration, peroxidase (POX) activity and hydrogen peroxide (H2O2) content. Accumulation of high levels of MDA and increased POX activity correlating with decreased H2O2 content were observed in both HL grown plants. These biochemical indicators revealed higher sensitivity to photodamage in HL grown lettuce and radicchio plants. LL conditions resulted in more effective functioning of PSII than HL when lettuce and radicchio plants were grown at 70% red, 20% green and 10% blue light composition. 相似文献
5.
基于proteus的51单片机16×64LED的设计 总被引:1,自引:0,他引:1
王波 《西安航空技术高等专科学校学报》2011,29(1):67-70
介绍基于51单片机的16×64LED点阵显示屏的设计,在这里给出其原理图以及程序流程图。在Proteus7.5软件当中进行原理图的绘制,利用汉字转换软件将汉字转换为将要发送给单片机的点阵数据,在keil软件当中采用C语言编程,与proteus进行联调,并通过仿真软件Proteus7.5,最终实现自己设想的效果,总体上系统的设计简单、显示清晰、成本较低。 相似文献
6.
民用飞机驾驶舱照明光辐射安全问题探讨The Discussion of Civil Aircraft Cockpit Lighting light radiation safety issue 魏培坤 吴春泽 下载免费PDF全文
勤云测试 《民用飞机设计与研究》2012,(12)
民用飞机驾驶舱照明旨在为飞行员创造一个舒适安全的视觉环境,保证飞行员能准确地操作各种控制开关和清晰地判读仪表、显示器等的显示信息。照明的安全除了传统意义上的安全外也应包括光辐射安全,随着LED在驾驶舱照明中的应用,光辐射安全问题日益突出,必须制定出一种对驾驶舱照明环境中的光辐射危害水平进行评估的方法,以保证飞行员的眼睛和皮肤不受到潜在的光辐射伤害。 相似文献
7.
为有效去除民用飞机座舱中的挥发性有机化合物(volatile organic compounds,简称VOCs),对一种新型飞机管路式光触媒净化装置中的光学部件进行了设计、仿真与优化。该光学部件是将置于导光板端面的紫外发光二极管(ultraviolet light-emitting diode,简称UV-LED)点光源转换为导光板面光源,以获得净化装置中均匀的光照。受限于净化装置的构型,导光板需设计为两端入光的窄长型结构,而如何获得均匀的面光源出光性能成为一大难题。为了解决这一难题,对该光学部件进行了合理的光学设计,并予以仿真。进而根据仿真结果对导光板上的网点分布作出优化,并获得了较好的面光源出光性能。 相似文献
8.
闫晓金 《华北航天工业学院学报》2013,(6):23-26
在分析了大功率LED混光照明中LED光源特性的基础上,提出了三色LED恒流驱动电路的设计方案。驱动电路分别采用升压和降压拓扑结构,利用具有PWM实时调光功能的RT8452作为驱动控制芯片,通过改变外接PWM占空比即可调节LED亮度。实验证明,此驱动电路工作可靠,效率高,实现简单。 相似文献
9.
柳国宪 《长沙航空职业技术学院学报》2011,11(1):41-44,66
针对LED的特点提出开关型恒流驱动电路,通过电流与电压负反馈技术的采用,将LED的输入电流控制在一个稳定的电流数值下,同时使电路防止过电压的能力提高,可靠性大为增强. 相似文献
10.
刘景旺 《华北航天工业学院学报》2007,(1)
本文报导了通过结合自行制备的掺铈钒酸钇晶体(Ce3 :YVO4)荧光粉与InGaN/GaN蓝光发光二极管(LED)结合而得的白光发光二极管(W-LED)。在室温、正向电压3.5V、正向电流20mA时W-LED的CIE色坐标为(0.32,0.37),接近纯白色(0.33,0.33)。 相似文献