面向快速响应产品的星上目标定位及识别方法

针对遥感卫星星上目标的定位及识别，本文面向快速响应应用需求，首先对星上目标定位及识别工作模式进行研究，总结出狭义和广义两种模式，其次重点对像方-物方坐标双向定位算法进行梳理，并针对典型地物目标星上自动识别算法提出研究思路，最后给出算法的应用方法流程。本文研究为快速响应产品星上智能处理提供方法参考。     

一种软件脆弱性自动分析定位的方法

摘要： 为了更好地满足航空航天领域中使用的多种嵌入式软件的高可靠性要求，设计一种软件脆弱性自动分析定位的方法.该方法基于程序切片技术，改进现有的前向计算动态切片算法，利用动态程序切片收集程序运行时的动态信息，构造程序切片谱，设定相关统计量统计程序语句的脆弱性可疑度，生成脆弱性定位报告.在发现软件中存在的脆弱性后，该方法对导致此脆弱性的程序代码根源实现了自动分析定位.基于此方法设计开发了软件脆弱性自动定位工具并进行了实例验证分析，实验证明了该方法的有效性.     

Geometric reasoning under uncertainty for map-based localization

Map-based navigation in outdoor terrain lacking man-made structures or other highly distinctive landmarks can produce severe localization problems. This paper presents an approach to navigation which implements high level geometric reasoning and matching strategies based on those used by skilled human navigators. This approach, which is demonstrated on a real example involving imagery of mountainous terrain obtained with a video camera and USGS map data, is designed to avoid many of the pitfalls occurring when an attempt is made to navigate by modeling the environment mathematically. It exploits feature attributes which cannot be easily expressed quantitatively but are central to the successful human navigation process.     

Real time localization of gamma ray bursts with INTEGRAL

The INTEGRAL satellite has been successfully launched in October 2002 and has recently started its operational phase. The INTEGRAL burst alert system (IBAS) will distribute in real time the coordinates of the gamma ray bursts (GRBs) detected with INTEGRAL. After a brief introduction on the INTEGRAL instruments, we describe the main IBAS characteristics and report on the initial results. During the initial performance and verification phase of the INTEGRAL mission, which lasted about two months, two GRBs have been localized with accuracy of 2–4 arcmin. These observations have allowed us to validate the IBAS software, which is now expected to provide quick (few seconds delay) and precise (few arcmin) localization for 10–15 GRBs per year.     

基于局部几何特征的稠密点云配准方法

针对现有的稠密点云配准方法依赖初始位置设定、计算成本高、配准成功率不高等问题，提出了一种基于点云局部几何特征的稠密点云配准方法。采用深度卷积网络模型提取点云的局部几何特征，从而减少了三维点云数据的噪声、低分辨率和不完备性等带来的影响。在此基础上，使用K维树搜索完成局部几何特征描述子的关联工作。最后，通过随机采样一致算法对点云的相对位姿进行鲁棒的估计。通过对开源数据集上5个典型场景中的数据测试表明，该方法的配准成功率达到92.5%，配准精度达到0.0434m，配准时间相对最邻点迭代配准算法缩短了74.7%，实验结果验证了该方法的有效性、实时性和鲁棒性。     

姿态抖动运动单平台LBI无源定位系统的角变化率估计和定位算法研究

 研究了采用长基线干涉仪(LBI)体制的运动单平台无源定位系统受平台姿态抖动影响的问题，指出由于平台姿态的快速无规则变化，相位差变化率(RPDC)方法将难以适用，应当采用目标方位角变化率参数进行定位。基于此，针对三维几何空间，提出了一种RP-LS方法估计目标方位角变化率，继而实现对目标的定位。仿真结果表明，该方法能有效解决LBI体制运动单平台定位系统对姿态抖动的适应问题，实现对目标的快速高精度定位。     

脑电信号源脑电图定位方法的综述

临床神经外科医生针对某一种脑部病变做病灶(可看作一种信号源)摘除的手术时，需要对该病变的病灶做精确的定位。本文对脑电信号产生的根源、脑电信号源定位的重要性以及脑电信号源定位方法进行了探讨。     

基于相位变化率的无源定位法

无源定位技术有着广阔的应用前景，本文在现有单站无源定位方法的基础上，介绍了相位变化率定位法。该方法利用观测平台上两个相互正交的相位干涉仪接收目标辐射电磁波的相位获取目标的方向信息，利用对应的相位变化率获取目标的径向距离信息，从而实现对目标的实时高精度定位。文中还给出了观测平台飞行姿态变化情况下的定位表达式。仿真结果表明，该方法是一种发展前途较好的单站无源定位方法。     

Deformation Behavior of Mg-8 wt%Li Alloy under High-speed Impact

Deformation behavior of the Mg-8 wt%Li alloy at high strain rate was studied by means of the Split Hopkinson Pressure Bar (with strain rate of 103 s-1). It is found that shear localization proves to be the main damage mode for the alloy during dynamic loading. Strain and strain rate are the two necessary parameters affecting the occurrence of deformation and shear bands. Deformation bands begin to form when the strain and strain rate reach 0.20 and 1 900 s-1 respectively and will develop gradually with the strain rate increasing. Be-sides, deformation bands will transform into shear bands when the strain and strain rate reach above 0.25 and 3 500 s-1 separately.     

用于被动寻的导弹的带末端落角约束的变结构导引律

使被动寻的导弹在较低的平飞弹道情况下，以较小的俯冲过载和最佳攻击姿态精确命中目标；采用带落角约束的变结构导引律，对弹目距离及距离变化率进行估计，克服被动寻的导弹不能测距的约束，同时使切换开关增益随时间自适应变化以减小俯冲过载；利用某型在研被动寻的导弹的气动参数，对此变结构导引律进行了数学仿真，仿真结果表明，在较低的平飞弹道约束条件下及过载要求范围内，该导引律能以期望落角命中静止与机动的坦克目标，对弹目距离变化率及距离的较大估计误差具有较强的鲁棒性。